Cleaning the power switch in a Game Boy Micro (OXY-001)

Подписаться 21 тыс.

Просмотров 3,5 тыс.

50% 1

Does your Game Boy Micro display the low battery warning intermittently? Is your battery life lackluster, especially after installing a new battery? Does touching the power switch (without actuating it) trigger the low battery warning? It's probably a dirty power switch. This issue happens with every model Game Boy due to the design of the power switch.
Take a look at one of my older videos for a more extreme example of this behavior: • How I fixed my SP with...
or this video from BennVenn on the abridged process of cleaning a power switch: • GBA power switch teard...
You'll have to take my word that this Micro was acting up since this intermittent problem, of course, did not rear its ugly head for the video. Nonetheless, after performing the cleaning, I'm confident that not only was this the source of my issues, but cleaning the switch was the solution as well.
While you have your Micro apart, you should take the opportunity to clean it. You can (and should) clean everything but the motherboard (and speaker) in warm water with dish soap. Just make sure it's dry when you reassemble. IPA or window cleaner is acceptable for spot treatment but warm water and soap will work A LOT better.

Игры

Опубликовано:

25 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@capeli 4 года назад

Makho you are a genius! I've search all over the internet for months looking for someone with real expertise fixing GBMs, and finding you was the best thing that could have happened to me. 4 GBM fixed and 2 left to go, from Fuses replacement to this cleaning of the power switch and I can't thank you enough!

@TheTuneAce 3 года назад

Just got a micro in the mail. One of the external screws is stripped, so I guess I gotta get a removal bit kit lol. Want to give the whole console a nice cleaning. The real question is: can I fit an iPhone speaker in it xD

@joaquinanaviso Год назад

Makho do you know what to do about a stripped Y screw of the housing of the micro?

@makho Год назад

drill it out and get a more appropriate fitting driver next time

@torrieitazura4343 2 года назад

Quick question. Mine randomly turns off, I am thinking that the power switch is lose but idk how easy it is to replace the power switch. In your video you didn't take off all of it and in worried I will have to. What do you think I should do.

@KingKryOS Год назад

Hey, I know this was 8 months ago, but if the power switch is loose, it might just be the plastic around the switch. Once you get to the switch in the video, just before he desolders that metal lid to do the actual cleaning, moves freely in that little housing. It’s the plastic piece around it that gives you the click once the whole micro is assembled. Check to see if the plastic that you actually touch when the micro is assembled is broken or cracked.

@wesleyturner6461 3 года назад

Where did you get your faceplate for your micro, I can never find any online or at least non I like.

@makho 3 года назад

no longer available

@FrankOrion Год назад

Why would a backlight stop working? Got a new screen and still not lighting up. How do you fix backlight thingy? @16:24

@makho Год назад

the FFC? If yours is damaged, you will need to replace it.

@lari_26100 3 месяца назад

Hello Makho! I haven't played my Game Boy Micro in a while, and when I picked it up now, the screen didn't have an LED. It turns on normally, I can see the description "game boy" but the LED doesn't work. I tried adjusting the brightness and switching screens, but it didn't work. Do you know what it could be?

@makho 2 месяца назад

You'd need to take clear pictures because I cannot diagnose this kind of issue with only a description. I'd recommend posting a thread on the game boy discord troubleshooting section. The easiest thing to try is to just buy another LCD and swap it in.

@lari_26100 2 месяца назад

@@makho I already made a post on Reddit. I don't know the Discord community. I already tried changing the screen, but it didn't help. 😞

@BossMog059 4 года назад

Where did you get the speaker from?

@makho 4 года назад

www.aliexpress.com/item/32824464811.html 13mm option

@bagusxsp 3 года назад

I just got used gameboy micro the famicom edition, it charges like normal, but the catch is it turns on for like one sec and completely shut off.. any idea what causes the problem? the battery doesnt look bloated, but the power switch is just a bit loose

@makho 3 года назад

Sounds like there's a short. Have you already disassembled the console?

@bagusxsp 3 года назад

tbh I haven't since I didn't smell any burning or something like it and I dont have much experience disassemble little consoles, could it be over voltage from the battery? cause it's the original battery. It works fine for first 20 minutes after unboxing it and it starts to randomly shut off in-game and after sometimes and at like hours after trying to play with it, it shuts down right before the gameboy logo pops out. It never shows red battery indicator and the blue light never flashes, I hope its only the battery cuz 😅

@bagusxsp 3 года назад

@@makho ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5gNnMWESylw.html here's the video.. lemme know what you think about it. :D

@edrisyung4260 Год назад

Do you know who sells replacement power switch that I can just replace?

@makho Год назад

It's a custom part made by nintendo. No one makes a replacement. It should be the same part as used on SP though and there are sellers with NOS parts for now retrogamerepairshop.com/collections/gba-sp-power/products/game-boy-advance-sp-power-switch-oem-new-replacement

@user-rd5wj2mm8n 4 года назад

Do you recommend a good battery replacement for GBA?

@makho 4 года назад

Of course. A bad battery is no good.

@user-rd5wj2mm8n 4 года назад

@@makho no, sorry. I mean can you recommend a good make and model battery?

@makho 4 года назад

@@user-rd5wj2mm8n Sorry, I don't have any specific recommendations for Micro batteries. All of my consoles are on original batteries or something that I had laying around. If you want AA recommendations though, I'm very pleased with IKEA LADDAs.

@jsar3283 3 года назад

What if the little metal piece that you bent a little comes off?

@makho 3 года назад

Put it back in. Once the switch is reassembled, the slider and shielding should hold the wiper in place. Unless you mean the wiper broke. In that case, I'd salvage parts from an AGB power switch.

@jsar3283 3 года назад

@@makho yeah i was worried I broke it but I put it back in place and soldered the metal plate after I cleaned it up and now it works a lot better! Thanks man I’m really loving your Gameboy micro repair videos I’ve learned a lot hoping you do some more soon!

@edwinurbina3286 8 месяцев назад

Makho 🤘😎🤘 what can I do to fix my Gameboy Micro? It plays and charges well, It turns off and on, on its own while the volume is high up but the audio is very low, I have to put it close to my ear to hear the audio😢

@makho 8 месяцев назад

You're sure the speaker is fine?

@edwinurbina3286 3 месяца назад

The speaker works fine, when The on/off switch gets bumped a little the select and start turn red

@edwinurbina3286 3 месяца назад

Should I get new fuses?

@edwinurbina3286 3 месяца назад

I’m going to clean the on/off switch

@xbl4ck7 3 года назад

you happen to know if a micro isn't charging that this could be a power switch issue? I changed the battery and its still not charging? Also the brightness adjuster isn't working. Do you know what could be wrong with that? I'm trying to fix. Need expert!!! :-)

@makho 3 года назад

no, check your charger.

@xbl4ck7 3 года назад

@@makho I have another micro that charges with the charger fine. Not the charger..

@makho 3 года назад

@@xbl4ck7 check the charge port then. Make your way through the charge circuit until you find the problem.

@Holdthispocket 3 года назад

Ever thought about doing a micro usb charger mod?

@makho 3 года назад

There's no way to implement it without significant modding, violating USB standards, or just dropping link cable support.

@Holdthispocket 3 года назад

makho I have a micro with a broken charging port. Got any suggestions to me papa?

@Mistraker 3 года назад

Hose the switch down with deoxit, and flip the switch back and forth for about ten seconds, and it'll be back to 100%. No need to take the whole goddamned thing apart.

@makho 3 года назад

lol ok bud