Cloning a New Tire Pressure Monitor Sensor (TPMS)

Подписаться 422 тыс.

Просмотров 89 тыс.

50% 1

To purchase this kit from Autel, visit my Amazon Affiliate store www.amazon.com/shop/scannerda... These Autel universal sensors run about $30 a piece and can be cloned to a factory sensor, eliminating the need to program the new sensor after installation.
ScannerDanner Tools:
www.scannerdanner.com/tools.html
www.amazon.com/shop/scannerda...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Авто/Мото

Опубликовано:

20 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 318

@smonetus День назад

Oh Man, did this video bring back memories of working in a full service gas station as a teenager. My boss had me doing tires on Saturdays whenever they came in, of course we did not have TPMS sensors to worry about breaking.

@ricksexton2272 3 года назад

I'm glad to see your struggles that all mechanics go through and yes you made it harder on yourself than you had to. Much respect for what you do.

@dominicene3647 4 года назад

I enjoy watching the Danner brothers interact with each other. Can you imagine how much knowledge combined they posses? Caleb great job as always with the production!

@Jay_Dahl 4 года назад

Thanks Kaleb, for helping your father video tape this procedure. He would have had a difficult time doing that by himself, and it was an interesting video for us all to learn from.

@JorgeLopez-ej5mw 4 года назад

This is an authentic video with mistakes include.. at the end I love the video. It make me think that is not going to be easy but at the end you can make the necessary repairs. Thanks guys!!

@vlstyles 4 года назад

ROFL with that TIPM! It was definitely calling for you!!! Love Caleb's editing! That SD Logo is my new background!!

@CubasAutomotive 4 года назад

Right?? That Chrysler's name Christine..... lol. What a trip!

@roadkill5333 4 года назад

We all got to see SCANNERDANNER DICE CLAY live and in person, tonight!! Lol

@BigDog50001 4 года назад

Chrysler TIPMs, they work great in stop and go traffic....

@josemontes9050 4 года назад

I haven't seeing you struggling so much with a tire, but is a good lesson, because it happen a lot to us every time.

@adilmchichou5710 4 года назад

The best technician I ever seen genius ( scanner danner ) doesn't know really how to mount a tire with sensor that s mean you focus on the real stuff and that s good thanks scanner danner

@PaulyD0859 4 года назад

This video is full of awesomeness! All the great quotes. My favorite is, “I didn’t break it, I broke it by just pushing down on the tire.” But man, all the other stuff... trying to stop the leak by tightening the stem nut, not being able to break loose the lug nuts, saying, “I’ll deal with that later,” trying to avoid rebalancing the wheel. LOL! This is solid gold, my friend! I’m sorry I could only hit the “thumbs up” one time.

@ScannerDanner 4 года назад

All real stuff right? Lol

@GCraigmile 4 года назад

Iv had that same kit for years and it’s OUTSTANDING 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 ,, It is my main go to tool for TPMS

@randygould4109 4 года назад

i have been using that tool for about three years . love it

@victorlewis8970 4 года назад

Every video I learn something different, thank you SD.

@davidbrown1037 4 года назад

Good Video as always. I have the same tool but 1 - 2 models lower. I bought it mainly for another function though. You can use it to verify Key FOB Transmissions. If you have a Key FOB that doesn't work, it is difficult to tell if it is the Battery, or the buttons, or ??? That tool can read the radio transmission from the FOB to ensure that it transmits from each button. Great for fixing a worn button. I live in Sidney B. C. Canada on Vancouver Island and our back yard is a Tidal Arm from the Pacific Ocean. That Chrysler with the bad TIPM, sounds a lot like the flocks of Canadian Geese that collect on the water behind our house and practice Formation Flying before heading south for the winter. They fly overhead and "HONK" continuously. Just like that Chrysler! After a few weeks, they leave and go south..... I think some of the practice is trying to find a leader that knows where south is. I don't know..... just sounded like them and made me laugh!

@germanmaldonado7526 3 года назад

Great video Dan! I see your videos too many years,keep doeing! Thanks from PR.

@jameswatkins7278 4 года назад

Step one mark the outside of the tire at the valve stem with a “V” pointing to the valve stem Step two add washer fluid to the reservoir to turn off the message on the instrument cluster Thanks for all your videos I’ve learned so much from you

@paulfiebke3909 3 года назад

Dam ive git 4 stents in my jeart and fi ing go back for 2 to 3 more. Your making me feel good. God bless and keep up the good work

@supercoupe6288 4 года назад

i learn from mine & others mistakes, this video was very informative about the Autel MaxiTPMS TS508K plus when changing the TPMS on a tire changer was cool also

@VictorVictor-vg1mx Год назад

You helped us many times over Thank You for getting it done You did a great job!

@wyattoneable 4 года назад

Autel made a great tool because of the options that are included. I just installed sensors in aftermarket wheels and need to reprogram the computer to accept the different tire pressures the new tires require. I'll look for your video on that, thanks.

@weldingjunkie 4 года назад

I have that 508 kit works great. Great video. Can’t go wrong with that.

@captainshanx934 4 года назад

I have this tool and it is super super slick! Hanco had an offer that if you buy this tool from them, came with 12 $32 universal sensors for free!

@russellbrown2279 2 года назад

Appreciate the video authenticity and your interaction with your brother and the camera. I kept seeing Woody Harrelson changing a tire stem.😊 I'm now a subscriber, keep up the good work. Peace and blessings. 🙏

@ScannerDanner 2 года назад

Thank you Russell! Appreciate this comment

@StationGarageSt 4 года назад

Smiled all the way through this.....cos I've been there and got the tshirt! Respect ur self control . uk watching

@ScannerDanner 4 года назад

Haha my true lack of self control was edited out

@rickirelan8385 4 года назад

Paul,I started with an old Coats 10-10,that was more worn out than mata Haris mattress,,went thru over 20k removals ,,tire from rim for Old man's scrapyard,,,,since,,I think we've followed similar paths,, enjoyed this,for old times sake!!

@ernestog7537 4 года назад

Great video. Tire Work the struggle is real. Lol... No scope today very rare. Thank you for all the great videos you put out.

@davidb.fishburn9338 4 года назад

Chrysler dealer tech here, working in the used car dept, i knew that the leaky stem was not going to be fixed by tightening the nut, due to the corrosion. When you run out of the Autel sensor, get more. What i've seen is that the sensors in many cases cannot be programmed with a different brand tpm tool. I wish the industry would standardize the comm protocols for the sensors so that any brand sensor can be programmed by any brand tool. I've done the pop out the old sensor and pop in the new one just with one bead popped. Have lost a sensor inside too, the trick is to push the loose bead down far enough to reach in with a tool and grab the sensor. As far as getting tire back in place for the balance, it's far easier to clamp the wheel and move the tire. I agree with the sentiment about the tipm, it's a stupid idea to permanately mount relays into a circuit board, especially those that can fail often.

@billbixby6411 4 года назад

What a brilliant video,don't think i've laughed that much for ages,you remind me so much of myself,the rushing about getting irate with yourself,sweating like mad and the car horn just added to it all.

@blockbertus 4 года назад

Thanks, Autel! And thanks, Paul!

@stationaryenginesworldwide 4 года назад

Thanks Paul and Caleb great video again.

@padroooo 4 года назад

Paul that was funny watching you drop that TPMS sensor inside of that tire. I did it twice yesterday on my 20 inch 1999 Plymouth Prowler wheels. The big difference is I don't have a tire machine and low profile tires are a lot harder to work with if you don't have the right tools. I bought the Autel TS508 and cloned a set of four TPMS sensors on my spare set of tires for my Prius. Those metal valve stems don't like salt and go bad when they go through too many winters as you now know.

@hammondautollc7809 4 года назад

Thank you for showing how it really is in the shop

@arthurfricchione8119 4 года назад

Paul,just a word of caution always stand behind or in front of tire when airing them up. 40 yrs in the aircraft industry taught us not to be facing the rim in case it blows. Thanks for the video my friend. Good camera work Caleb. Paul your brother has one nice shop and set-up. Lucky you. 👍👍

@terrybarkman3219 4 года назад

Was entertaining watching you doing the tire ha, we got among the tpms tools at work one like that Autel. Works great

@RedemptionGarage 4 года назад

Great video scanner danner i always look forward to your videos i have learned a lot from you

@georgebonney90 4 года назад

Thank u mr. danner and caleb 👍

@manuelamaya826 4 года назад

Thanks Paul. I like all videos.

@martymurphy9627 4 года назад

Thanks for being real in struggles.

@8953147 4 года назад

The karate chop to the wheel was crazy funny!! Great video , Autel is a sweet tool! All vehicle should be able to recognize/reprogram those sensors without additional tools...all about money!!!

@ScannerDanner 4 года назад

That was Caleb's creation lol, he thought it was funnier than I did but I let him keep it haha

@23thebull 4 года назад

you may not be a tire changer but your an excellent teacher .

@ScannerDanner 4 года назад

To purchase this kit from Autel, visit my Amazon Affiliate store www.amazon.com/shop/scannerdanner These Autel universal sensors run about $30 a piece and can be cloned to a factory sensor, eliminating the need to program the new sensor after installation.

@user-io3hw7hx7q 4 года назад

AWESOME OUTSTANDING JOB THANKS

@FASTECAUTO 4 года назад

I love the originality of this video...the workshop can be a very fun place most times...that horn!!🤣🤣

@brotherbrian1 4 года назад

I deal with those stupid sensors every day. That is a handy little scanner, we've got 2 different models. And for the first time in history, I know more about something than you. 😂😂😂

@roadkill5333 4 года назад

I think we all knew a little more than him, today! I was yelling "PULL THE DANG FUSE", every time I heard that horn!! ;-P

@husseinolivia2548 4 года назад

This video is incredibly amazing especially the HORN LOL I laughed on it! Anyways keep posting videos like this one it's worthy to watch

@mrcountry Год назад

Great video with all that struggles 👍👍

@jameskeeler6321 2 года назад

I like your approach! You know the old saying "the cobbler's children go without shoes."

@zafarhafeez2181 Год назад

Good job, That's how we learn.

@danielgarcia9095 Год назад

That karate chop caught me off guard lol ,great video.

@PaulCTownsend 4 года назад

You done good.

@angelmanuel4553 Год назад

Thanks guys....

@mostlymoparih5682 4 года назад

That's smart of your brother to put the valve stem tool on a valve stem. I say that's smart cause that's where I keep mine. They are so small it makes em easy to find. Nice lesson tire teacher oops I mean Professor. Happy Motoring.

@fire7765 4 года назад

Great job

@paulfiebke3909 3 года назад

I know im out of shape but your making me look bad. Keep up the good work

@JoeT.1960 Год назад

Your my go to man very very smart 👍👍

@MultiCheapguy 4 года назад

Hey I've got one of those valve core tools in my toolbox great minds think alike

@scottsmrcka2769 4 года назад

I use the 508 kit at my shop. It is the way to go.

@xoxo2008oxox 4 года назад

It sure is hot this weekend! Love that funny kung-fu tire removal tool!

@Pablo_Automotive 4 года назад

Thanks team Danner 💗🔧👌

@enriquev8832 2 года назад

It was actually nice seeing struggle in the process as we all do every now and then

@bostonstraightpride7223 4 года назад

Good idea

@SmittySmithsonite 4 года назад

I'm putting my money on some swollen, cracked and green front airbag sensors in your truck causing the airbag light, Paul. 😉 I have the same truck, only in a 1500. Maybe if I had ponied up the dough for the HD model, I wouldn't have replaced my differential at 97k. Looks like you got better paint than I did, too - right above my rear fender well on both sides of the box are several swollen rust blisters under the paint. Truck has been garaged since the day I drove it off the showroom floor in '07, too. 😡 Great vid! Love Autel's sensors. I haven't used or programmed any yet, but when they first came out, I was very glad. I've got the Maxisys 906TS that can program them. My OE wheels are my winter set, so those got sold on eBay many years ago, and regular valve stems installed instead. I just deal with the stupid light. 😁 My summer wheels are off a '10 LTZ, so the batteries should be dying in those any day now. Shocked they're still working at the moment. 10 years seems to be the magic number here in MA for that. Don't sweat the tire struggle. The struggle is real, lol! I do that every day with everything, it seems. More so when the camera is on - funny how that works ... Just got back from a week in OH. Catching up on RU-vid vids now. No donations to PA's finest this time. My last trip cost me $182 somewhere near Clarion on Labor Day weekend - 87 in a 70. Ouch ... 😢

@SmittySmithsonite 4 года назад

P.S.: Loved Caleb's karate-chop audio/visual effect there too! 🤣

@ronrobison2847 Год назад

Thanks, nice 👍

@joebush5463 4 года назад

yea youre damn good at diag

@rogerf3622 4 года назад

Using that tool you could also walk around the truck to each tire and scan the tire pressure. Saves time checking tire pressures so you don’t have to remove the caps and place a gauge on them.

@RichfieldAutoCenter 4 года назад

The aftermarket EZ sensors are great. Usually cheaper in price than preprogrammed sensors from the local parts store that sells both.

@ozzstars_cars 4 года назад

Danner is an awesome cheat sheet, instant answers. :-)

@ScannerDanner 4 года назад

Haha yes he is

@oldhvacguy8427 4 года назад

C'mon guys That's morse code!! That poor KIA is pleading for help! LOL

@dmorley100 4 года назад

Couple of things I noticed. One, @9:10, the tire machine you tried to use before switching to the other tire machine because you couldn’t get the head of the machine down to the wheel, there are 4 pedals on the front of that machine. The pedal furthest to the left would’ve lower the head assembly. The other thing is when you had the valve stem out of its hole in the rim, because of the corrosion that was present on the TPMS sensor seal, you should’ve taken a 2 inch long piece of coarse emory cloth, rolled it up the way people who smoke marijuana roll up joints, then stuck the marijuana joint emory cloth roll in the valve stem hole in the wheel and cleaned the corrosion out of the hole before you put in the new TPMS sensor. It’s possible you may wind up having another leak in the same spot because this wasn’t done.

@ScannerDanner 4 года назад

Never noticed the corrosion in the valve stem hole. Guess that's why I stick with wiring lol

@dmorley100 4 года назад

Hey, tire work ain’t easy. If it were, everybody would be doing it 🤣

@waverider5751 7 месяцев назад

I laughed at his description of how the sandpaper was folded/rolled, lol!

@dmorley100 7 месяцев назад

@@waverider5751 🚬🤤🤣

@kctyphoon Год назад

I would have to have an outhouse built for that compressor. No way i could deal with listening to that all day.

@andrewjohn7782 4 года назад

Did you notice the size difference between the old and new sensors? My 07 Toyota sensors lasted 9 years before I changed them (while replacing the second set of tires). I used clone(able) sensors as they avoided the reprogramming if the system. The 'clone' sensors started failing in less than 3 years (and they were always slower at displaying the tire pressure than the OEM sensors). I Dissected the parts (yes I kept the originals) and found the clone sensor battery to be about 1/3 the milli-amp hour rating (they were standard button batteries, soldered in, in both cases). I bought new Denso OEM parts on the web for less than $30 ea instead of putting clone units in again. They had to be programmed be hand, n sequence, with our Autel Maxisys, but they are back to displaying the tire pressure before the wheels even start turning (clones took from 20 second to 2 minutes after the tires started rotating). If you are going to keep your car, think about the life expectancy (I would prefer to not change sensors each time I replace my tires - time and money). If you are servicing other people's cars, 3 or so years might be ok for them - but you might want to ask. If they are low mileage users, the sensor will probably go before their tires need replacement, and that might look bad for you. Yes, cloning is quick and having 'one part fits all' is convenient at the shop, but I find it's a pain, and an added expense, to change them more often than the tires. Thanks for the memories.

@glasser2819 4 года назад

great write up about cheap knock offs. Shredder valves are German engineered to sustain a business: leaking seal, service kits etc

@martinpena9712 4 года назад

“When in doubt, pinky out” lol spongebob reference Caleb? 😂 Great timing, had to scroll down to comments to see if anyone mentioned that !

@ScannerDanner 4 года назад

absolutely it was haha

@d.d4184 4 года назад

I feel your pain. Nice video.

@Pete-in-Essex 4 года назад

Good Stuff...

@chriswilly2208 4 года назад

I would be a mess on tires. Great watch. Thanks

@mfsperring 4 года назад

Loved the little video editing humour.

@ScannerDanner 4 года назад

That was Caleb and I wasn't a fan of the hoyah but I let him keep it lol

@mfsperring 4 года назад

@@ScannerDanner I kinda figured it was him. I think the 'huyah' part works because it was him adding it. It highlights the banter with you two, one of the things I've come to enjoy is that interaction as father and son. It's the same reason I love the interactikn between you and your brother. It also helps keep content fresh. I've said it many times, hanging in a shop is the perfect place for young men to learn the subtlety of manhood. Learning work ethic, cooperation and that difficult line where joking be omes disrespect. Sorry I got a bit serious there so insert your favourite joke right here and pretend I said it. Lol PS Caleb don't be getting all cocky over this. Remember your dad will always be able to take you out. LMAO

@ScannerDanner 4 года назад

@@mfsperring haha hear that son! I'll still beat your ass. Thanks Mark!

@josealers67 4 года назад

Premium job SD.

@YourAverageFNAF_Edits 4 года назад

A good tip at minute 15:29 👍👍👍

@CubasAutomotive 4 года назад

Oh man Paul! The struggle was REAL!!

@ScannerDanner 4 года назад

Haha sure was! Nothing staged here right?

@CubasAutomotive 4 года назад

@@ScannerDanner oh for sure it wasn't! Stupid Chrysler. .. lol 😂😂😂 I was hoping someone would've pulled the battery terminal off! Only at the end was the fuse pulled! 😂😂😂

@jtr990 3 года назад

You can't go wrong with a TS508, that's for sure. Especially winter tire season.

@TheRetiredtech 4 года назад

From experience shortcuts are rarely the way to go.

@lucianlucian9911 4 года назад

When I`ve saw all the karate techniques that you know bro, I was expecting that you will do a Mortal Kombat fatality and end with the bloody dam Dodge...Nice editing Caleb!

@sciatl2505 4 года назад

They do make TPMS VALVE STEM REBUILD kit so you didn’t have to replace the sensor itself

@scientist100 4 года назад

Just get this scanner and program using the scanner, any autel or launch will do it.

@jimmiller9641 4 года назад

scientist100 why spend the money on the tool (unless you’re doing it often enough) when you can buy the rebuild kits for $5?

@scientist100 4 года назад

@@jimmiller9641 how do you get rid of that annoying light on the dash? I have the tool to scan which one is bad, get its serial number and the scanner to program it. The tool to read the frequency cost me about 150 I believe, but I have some occasional clients that want this fixed and I tell them which one they need to replace for a small fee and I reprogram it too. The tool has a walk through on the programming sequence so no need to look around.

@billgates6795 2 года назад

Very informative - especially with the unplanned stuff - and funny stuff too. Where can I find a brother with a shop, as he may come in handy.

@martyosborne3399 4 года назад

Hmm using that tool I could program a whole new set of sensors to match my Prius wheels so I can put the new ones in my winter snow tire wheel and the Prius would not know the difference! Great... now to save up enough money to budget out of my SS check. This was a great demo video! My 08 Saab 9-7x 5.3i does not care and all I do is take my TPMS tool and set all 4 on my snow tires. Toyota just wants people to come in so they can sell new sensors and service.

@ScannerDanner 4 года назад

To be honest, I think the kit is worth it! You'd be paying probably just as much for 4 new factory sensors for your car

@shuaibansarishuaibansari2677 4 года назад

Good luck dear sir I'm India

@sergiovtorres 4 года назад

I like how you was about to put your hand at 16:22 to get more leverage and instantly knew it was was a bad idea.

@ScannerDanner 4 года назад

Lol you caught that huh? What a stupid initial thought that was haha

@nicke2307 4 года назад

Been there done that lmao... I think yours came off because you tried to tighten the valve stem nut. Usually you hold a little metal dowel to keep the valve stem stationary. In your case it turned the valve stem and backed it out because there was no metal dowel holding it

@paulfiebke3909 3 года назад

The horn os beeting you😂😂🤣🤣😂🤣😂

@danielesilvaggi 4 года назад

I changed out all my nuts and they came with orings no more leaking. Rockauto has them cheap.

@vincescalise4821 4 года назад

I liked your abominable snowman reference from bugs bunny when you said gosh it’s hot Very informative video to lol

@ScannerDanner 4 года назад

Hahaha nice! You caught that. You are the only one and that's exactly what I was referencing

@engineerkohat 4 года назад

Your Jack is producing doggie sound!

@teresapeabody2746 3 года назад

A quote from my brother: "Never schedule more than one fifteen minute job in any eight hour period".

@crankshaft007 4 года назад

You can buy repair kits that come with new seals. Most aftermarket parts place sell them. And keep your tpms sensor

@ScannerDanner 4 года назад

For sure, that would have been an option as well, but I had, what, 8 new pretty little sensors sitting in a box that I got for free! So why wouldn't i change it right?

@ablackformula 4 года назад

The OCD in me is on fire right now. Three bolt-in sensors and one snap-in? I prefer snap in myself but change the other three :) Also -- although you didn't appear to have much trouble, the sensors are much easier to snap-in if you disconnect the sensor first, put in the valve stem, then re-install the sensor. It allows the steel inner part of the valve stem room to move.

@buckyburnquist6825 3 года назад

Great video actually, it represents how most of us would get this job done and the struggles along the way so good job! What if the battery in the sensor is dead tho? Will the tool still be able to read it or no? Just wondering cuz my wife’s Yukon has all 4 sensors malfunctioning but they’re 10 years old.

@ScannerDanner 3 года назад

You'll have sensor codes. Also there are tools that will be able to read the sensors themselves to tell you if they are "talking"

@mrlongshankpipelaier 4 года назад

Oh lucky you and that tool. Yeah. I hate tires too. I walked out of my Firestone job cause of the smell......Haha. you said TIPM. I knew it was a Dodge

@shauno3697 4 года назад

If you just stick to the wiring, you'd have never learned this valuable lesson on how not to do that again. That look on your face 10 minutes in was priceless. :D And Caleb, way to bust one on your dad with the "cant change parts" bit.

@ScannerDanner 4 года назад

Love working with my son and my big brother

@D_Mitch13 4 года назад

That horn doe lmao. I waiting for someone to rip the module out.

@tomchristman231 4 года назад

Don't be a tire changer

@ScannerDanner 4 года назад

lol for sure!

@rickirelan8385 4 года назад

Tom,,come on!!,we all came.by it honestly

@throttlebottle5906 4 года назад

lmao!

@picklepee2771 4 года назад

I used to be a tire changer at tread quarters, not fun. Only got paid 9$ an hour and it's a dead end job. Now I work at a shipyard making $19 an hour starting off with TONS of benefits, deep down I still want to work in a good auto repair shop.