Cold Air Inductions Intake 2017 Camaro SS 

So I installed this exact intake yesterday and I will say that whoever says a cold air intake is a waste of money has no idea what they are talking about. I expected to hear the engine suck air and maybe a tad bit throttle response improvement. The first thing I noticed was the Iouder now, nothing crazy but a noticeable difference. 2nd the throttle response has a slight improvement but where I really noticed it is in the high rpms. My car didn't really pull in the top end but I tell you what after installing this intake when I get into the higher rpms damn I can feel my stomach pushing against my spine now! What a difference!! Worth every penny.

You have to love it when your car makes you grin like that!

I used Cold Air Inductions on my two Camaros 5th gen the 1LT and SS. It makes the engine breathe better for sure and I was happy with it. I own a 6 gen ZL1 and waiting for my Carbon Elite CAI to arrive soon. Many of those who bought it said they went for the look only not the performance. I'm not sure if that is entirely true until I try it. It is the most expensive intake in the market though. It deserves a review guys.

The first time I saw one of their CAI, it was on a 5th gen Camaro SS and was very impressed with it. Im a long-time hot rodder/buiilder and have seen many others over the years, but they are different than any others that I've seen on the market. I like it that the tops are see through and sealed off, as well as the intake tubes are ceramic coated aluminum. Instead of plastic, like the majority of them that are on the market. I'm currently building a Challenger SRT8 and had one from aFe on it, so I'm getting one one of those to replace it with

GM Performance just released that same intake under their brand name, keep it up, car is looking good! 😎

The window is for show yes but it plays a bigger role. You want 100% cold air when doing an upgrade. This box shields the hot air from the engine and allows the filter to only pull cold air.

you are going to want to wrap the intake tube.. my air temps went up considerably between pulls..

Is this cold air intake better than an AFE GT Momentum? I’m stuck in deciding between the two to go with a ported and filled intake manifold and also a big throttle body.

Do you disconnect the sound tube and remove. Or does this hook right up to the new intake?

what do you mean cant get a HP tune for the 17 LTs yet. You're saying that if I buy headers, ported intake manifold, throttle body, and cold air intake that I cant get it tuned on my 2017 Camaro SS M6?

How many screwdriver stabs does it take to get to the center of an air box... 3.

Awesome !!!!

Hey, you still think it's one of the best intakes? I'm looking to add one at the moment

do you have to tune for this?

Where to get that chrome Camaro emblem for underneath the hood??

Do you have to do a tune after installing one of these intakes? Or can you go without it?

Hi, i know this is an old video but after 6 years did you still have the Cold Air Induction, if yes, was it worth it and did you tuned? I order one of these last week and would like to know if you have any more reviews of it. thks in advance

Great video , keep it up!

"I'm single you guys".... LMFAOOO great vid !!

9:27 was that a cop on the left lmao 😂

What’s the exact name of the black part with Camaro writin n red next to the intake?

Closed air box not a good thing,unless you live in cali,Check out the new cold air intake from JLT.

its just to stop a whistling noise, not for added "vortex" of air or anything fancy like that.

K&N hot air intake with a plexiglass cover. Looks great! Zero power gain.

"Sounds like America." had me laughing 🤣😂🤣

That corvette is bad ass scared the shit out of me even without me being in the actual passenger seat

Cop entering shopping center at 9:28 while he was flooring it 😂😂

I am trying to convert my 2017 Chevy Camaro SS convertible from a dual exhaust with single tips to a dual exhaust with Quad tips. Any suggestions? I was thinking a Borla ATAK model 11920? Let me know!

Is this the 501 1100?

Are you serious? You paid Andy to install a cold air intake? All you need is a box cutter, screw driver, a ratchet, and a set of balls man!

I wish they would make these for the 2019 Ram 1500's!

my first mods will be exhaust, headers, cold air intake, cams and heads

I did put the stock cai back on** and im goin back tomo.

Hammerdown motorsports. I have the 2017 ss with this cai and a intune3 diablo. I took it to have it dynod today and it was all a complete failure. Fuel/air was from 12 to 18 and i got 370 to the wheels and 405 tor. My buddy was there with a stock 16 and got 398 and 415. So i took the tune out and back to stock. Then fuel was in the 11s and i still only made around 360hp. After tht run it would not gain power at all. Most was 250hp and the intake temp was up around 170. I did notice no fans was in front of car. Im lost on what to do.

Hp gains?

What’s the name of this songggggggg i need it

I cringe when I see people toss tools under the hood of a car. I mean yeah it's just the engine bay... but no one wants little nicks and scratches from tossing screw drivers and wrenches around on the radiator shroud. Anyhow... looks good!

Did anyone else notice that cop at 9:27?

Song name at 3:05?

I have not put the stock cai back on and its stock tuned. Gonna take it back tomo. Any advice. Its a a8 also. ThNks in advanced to any advice from anyone.

Does your intake whistle? I seem to have this issue even with a ported throttle body

Just check their website I have no idea why they don't offer cold air induction kit with sound tube delete? I won't buy one that doesn't have that option

Does it add more horspower? And if it does how much do you think it adds

I have 2016 ss camaro will cold air really give more horse? About how much

Spacer just eliminates throttle body whistle

is a tune necessary for this intake? im planning on tuning my 17 1ss when i do my long tube headers.

Lol that screw driver was all over that car 😂😂😂

Did you even test others out because everyone is saying the roto fab is the way to go!

Police at 9:25 lol think hes just parked lol

Do this Air Intake need a tune or can you just install and drive?

What’s exhaust are you running it sounds so awesome

Subbed!

Did you tune it after you put it on??

Very nie air intake. Way better than k&n intakes!

my 2ss 1LE came with it from the factory

Like the Camaro.. I have a 2014 Camaro RS, yeah V6, but I like it.. I have a Cold air Induction intake as well

Just installed the GM one on mine, looks similar. Is that a cop at 9:27?

What exhaust is on your car?

i like the sound change that happened when i installed my cold air inductions cold air intake but it seems as if the computer adjusted as the cool sound it used to make has dissipated. I stored the car for the winter with the battery out assuming the computer would reset and in the spring I would hear the sound again, but no sound. O well it was fun while it lasted. did that cop at 9:26 come get you guys?

At 9:27s cop car!!!!! Hello :-)

I'll never understand why people don't use sockets on hose clamps instead of screwdrivers that can and often do slip off the head. This often results in the screwdriver scratching something along the way. Using a socket/ratchet combo doesn't have this issue.

I honestly couldn't take watching that guy with the screwdriver.

Wouldn't let this backyard multifixer touch my car. Tool slipping, tool throwing ON the car itself! But then I'm also European..

who pushed down on a tool and turns with the other like that. lmao

That first camaro sounds like a tractor

Stupid sound tube needs to go !!!