Тёмный

Cub Cadet XT2 - Weak Reverse Quick Fix 

Eliminator Performance
Подписаться 100 тыс.
Просмотров 76 тыс.
50% 1

Step by Step!
Sometimes these Hydrostatic Transmissions can develop air in them, even on these Residential units that (normally) don't require fluid replacement.
Shown in the video are Cub Cadet XT1 and XT2 riding lawnmowers that I am in the process of performing a full spring service on.
The XT2 has a Tuff Torq K46DM transmission, and my customer complained that the reverse seemed a bit weak. Sure enough, when I picked it up, it wouldn't even back into my trailer.
Today I'll be showing you how to "purge" the air out of these hydrostatic transmissions, and this can be done regardless of whether you've changed the fluid in them or not.
I've found on numerous occasions that doing this simple and quick purge significantly increases how the transmissions drive up an incline in reverse.
These residential units don't have External Oil Reservoirs, and as long as they're not leaking, generally don't need fluid added.
However, Tuff Torq does recommend you replace the hydrostatic transmission fluid on the K46DM in the 1st 50 Hours, and every 200 Hours under extreme operating conditions. This would include towing heavy loads, commercial use, etc...
Note: To drain and change the hydrostatic transmission fluid on these residential riding mowers, the transmission usually needs to be removed from the riding mower.
Even checking the fluid level on these can be difficult, due to the placement of the fluid fill cap on the hydrostatic transmission (shown in the video).
Tuff-Torq K46DM Maintenance Instructions: www.tufftorq.com/tuff-torq-k4...
Hydro-Gear Transmission Purging Video (on incline): • Hydro-Gear Pump & Whee...
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
Get up to 3 Months FREE NordVPN with this sign up link; ref.nordvpn.com/VDyPaQedOsk
Lube-Shuttle: www.lube-shuttle.ca/ (Promo Code ELIMINATOR for 5% OFF)
SOCIAL MEDIA:
/ elmn80r
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/3MqXvUx
Camcorder: amzn.to/3MJqi8n
Tripod: amzn.to/3BMuy0I
Microphone: amzn.to/3Wq4FNp
Cheap Mic: amzn.to/43gcLKN
Old Headphones: amzn.to/45kl6im
New Headphones: amzn.to/3OpK2PD
Headphones for Music: amzn.to/3olPI2t
Editing Software: amzn.to/3OvpR2W
Photoshop: amzn.to/3OxgS1a
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Хобби

Опубликовано:

 

15 апр 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 152   
@EliminatorPerformance
@EliminatorPerformance Год назад
One thing I didn't mention in the video, and also something easy to check: Inspect the drive lever on the transmission (this is what the pedal rod hooks up to) as it could have a large build up of dried grass behind it, preventing it from pushing back far enough to engage the reverse drive! However, sometimes these Hydrostatic Transmissions can develop air in them, even on these Residential units that (normally) don't require fluid replacement. Shown in the video are Cub Cadet XT1 and XT2 riding lawnmowers that I am in the process of performing a full spring service on. The XT2 has a Tuff Torq K46DM transmission, and my customer complained that the reverse seemed a bit weak. Sure enough, when I picked it up, it wouldn't even back into my trailer. Today I'll be showing you how to "purge" the air out of these hydrostatic transmissions, and this can be done regardless of whether you've changed the fluid in them or not. I've found on numerous occasions that doing this simple and quick purge significantly increases how the transmissions drive up an incline in reverse. These residential units don't have External Oil Reservoirs, and as long as they're not leaking, generally don't need fluid added. However, Tuff Torq does recommend you replace the hydrostatic transmission fluid on the K46DM in the 1st 50 Hours, and every 200 Hours under extreme operating conditions. This would include towing heavy loads, commercial use, etc... Note: To drain and change the hydrostatic transmission fluid on these residential riding mowers, the transmission usually needs to be removed from the riding mower. Even checking the fluid level on these can be difficult, due to the placement of the fluid fill cap on the hydrostatic transmission (shown in the video). Tuff-Torq K46DM Maintenance Instructions: www.tufftorq.com/tuff-torq-k46-oil-maintenance/ Hydro-Gear Transmission Purging Video (on incline): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4C4P1Qt6_XY.html
@clemkadiddlehopper2706
@clemkadiddlehopper2706 7 месяцев назад
Takes just a few minutes (for me, at least) to blow out all the grass, dirt, etc that you mentioned above. I have a curved tip on my air hose nozzle and this does it just fine. I was surprized as how quickly this can be done, because I am an EXPERT of turning a job that should take only 10 minutes or so to complete but usually turns out to take 1 & 1/2 hours to finish!
@roguebull3548
@roguebull3548 9 месяцев назад
HA this worked after my local shop told me I would likely need a new transmission. They are thieves and ignorant. My unit only has 68 hours on it. Thank you Sir!
@sargeast1629
@sargeast1629 10 месяцев назад
Kudos! Somebody who FINALLY knows what they are doing! Note to others, the first time I did this it had no effect at first. I went ahead and began mowing my 2 acres, and about halfway to though my mow, reverse began operating normally.
@philliphall5198
@philliphall5198 Год назад
Thank you for not dragging it out because time is important to me the most
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching Phillip!
@s7a2g65
@s7a2g65 Год назад
Have to give you Kudos... I was on the verge of paying a shop to replace my drive belt, thinking my CC was in need of it due to slow reverse and poor hydro response. I skeptically went and jacked my mower up, ran it and ran the trans. All the while KNOWING your vid was BS. While in the air, the wheels would miss-spin. Confirming in my mind you were BS. Once I got it back on the ground, it functioned like new. THANK YOU for the 300 price tag you saved me on some drunk red neck doing the same thing! For anyone reading this: Can't speak for all y'all's situation, but for me this "bleeding" technique worked FANTASTICALLY!
@henrypalin1109
@henrypalin1109 2 месяца назад
Very good video. Got to the point without endless babble.
@BeingRomans829ed
@BeingRomans829ed 2 месяца назад
Right! I hate it when they blab and blab and flapjaw and seem to be trying to get you to watch the video longer instead of getting to the point.
@longislandbiker7
@longislandbiker7 Год назад
You have no idea how badly i needed to see this video, my reverse has been horrible for at least a year and a half and searching the internet and Facebook pages have gotten me nowhere. I will be purging the air from my machine and see what happens. Thank you!!!!!
@EliminatorPerformance
@EliminatorPerformance Год назад
Good luck, this fixed both the XT2 and my father purged the XT1 that I showed and they both had an increase in reverse power.
@waynestefinashen239
@waynestefinashen239 Год назад
Yep i did the XT1 and it would not climb a raised section of our lawn in reverse until i did what Jake showed and climbs up like nothing now.
@longislandbiker7
@longislandbiker7 Год назад
@@EliminatorPerformance i just got done doing this to my mower and it did help but i have a 1¾" lip at the top of my ramp going into my shed that it still struggles with. So it's not back to the way it once was unfortunately. My transmission is non serviceable so that's also fun lol. Thank you for the tip it was much appreciated!
@waynestefinashen239
@waynestefinashen239 Год назад
@@longislandbiker7 I would try it again: parking brake off, trans lever pulled out, forward and reverse 5 to 10 seconds each 5 times engine at full rpm.
@longislandbiker7
@longislandbiker7 Год назад
@@waynestefinashen239 forgot to update, disregard my last comment. Apparently my tires weren't 100% inflated. Once i inflated them to the proper psi it worked! I do plan on replacing the fluid in my transmission at the end of the season... it doesn't sit right with me that my transmission is non serviceable.
@808airgunsbackyardaz6
@808airgunsbackyardaz6 Год назад
Just stopped by to support your channel. You have saved my lawn tractor more then once.
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks 808!
@wylykyotys
@wylykyotys Год назад
My Stanley quit going forward and backward, your remedy worked like a champ, Amazing!! Thank you!
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching, glad it helped!
@Tonedog88
@Tonedog88 10 месяцев назад
One of the best DYI videos I've seen. Well-done and concise. Thanks!
@EliminatorPerformance
@EliminatorPerformance 10 месяцев назад
Thanks for watching!
@bwilsonleasburg
@bwilsonleasburg Год назад
Great video. I have a Craftsman T240 2 years old and the backup problem I was having was grass buildup behind the pedal. Using a hooked wire and a compressor with a blow gun attachment I clened out around the pedal without having to take anything apart. I then used the quick fix noted here and everything worked like new.
@mattdeluca99
@mattdeluca99 Год назад
Thank you! Was frustrated by this for so long. Parked it facing downhill on yard. Worked like a charm! 😊
@1968dasher
@1968dasher 11 месяцев назад
Thank you so much, I had my cub cadet serviced and been having issues mowing on my step incline since I got it back, 5:26 did this and works like new, thank you so much
@delmarrathbone7092
@delmarrathbone7092 Год назад
My local Cub Cadet dealer said to only use the Cub Cadet fluid in my HDS-2165 which costs $18 quart. I was determined to find an alternative and after searching the web for months I found a gentleman that worked at the Cub Cadet factory in 1995 when mine was built and his job was to fill the transaxles with oil. He said the fluid came from a barrel labeled Castrol 20w50. I’ve been using it in my mower for over 25 years and have never had a problem.
@85camaro57
@85camaro57 8 месяцев назад
Rear axles aren't assembled at a Cub factory. They are Tuff Torques assembled and filled at their factory.
@delmarrathbone7092
@delmarrathbone7092 8 месяцев назад
I guess I misspoke. He said the factory and I assumed it was the Cub Cadet factory. I didn’t know the axles were built elsewhere. Thanks for correcting me though.
@darrencollins8028
@darrencollins8028 8 месяцев назад
Thanks for this video! My Cube Cadet’s reverse went to snail slow today and this video was the solution.
@darrencollins8028
@darrencollins8028 8 месяцев назад
Also I’ve subscribed to your channel as I’m new to having a riding lawnmower this fall and I’m sure I’ll need help in the future.
@KensSmallEngineRepair
@KensSmallEngineRepair Год назад
The simple things usually elude us. Good fix. Thanks Jake!
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks Ken!
@darrylthurston4336
@darrylthurston4336 11 дней назад
I have a john deere x320 with a tuff tongue transmission. My problem is weak forward after warm up. Do you think this will help?
@DIYVariety
@DIYVariety Год назад
Never seen it done before, learn something new every day. Cheers
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@ernestphilyaw3959
@ernestphilyaw3959 11 месяцев назад
Really good, really fast video. First one I've watched, that didn't require removing safety switches, cutting, or adjusting a push rod, that will kill the forward, just to give you more reverse.
@waynestefinashen239
@waynestefinashen239 Год назад
Great information on a simple fix done on a nice short video. Well done amazing how many hydrostatic drive mowers are coming in that have this problem and it is so easy to fix.
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes very quick fix, thanks for watching!
@bobnarrus3218
@bobnarrus3218 9 месяцев назад
Thanks for the information!! Worked perfectly on my XT2. Appreciate you sharing it!!
@Pete.Ty1
@Pete.Ty1 Год назад
👍👍👍 Once again another 1st class instructional video. Thank you.
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks Pete!
@Rein_Ciarfella
@Rein_Ciarfella Год назад
Hey, Jake! Thanks for a great tip. I expect this condition is more common than most would imagine.
@waynestefinashen239
@waynestefinashen239 Год назад
Just weird that the last 3 Cub Cadets that came in had the same issue some with hardly any hours and others with many hours on the meter.
@Rein_Ciarfella
@Rein_Ciarfella Год назад
@@waynestefinashen239 Sounds like more than a coincidence. Are there gaskets involved or mating surfaces that aren’t decked or flat enough from the factory, or maybe fasteners not torqued correctly?
@waynestefinashen239
@waynestefinashen239 Год назад
@@Rein_Ciarfella No all is good just happens that they rarely go in reverse or never paid a lot of attention to it. Jakes repair has worked on all of them so far.
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes definitely happens to quite a few, the old man did the purge on that XT1 and it reversed much better afterwards.
@HobbyMotorDK
@HobbyMotorDK Год назад
Super nice tip Jake. Thanks for sharing
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks HM!
@user-nt6wg3td3o
@user-nt6wg3td3o 8 месяцев назад
Thanks did what you said with video and demonstration. Worked like a charm. Thanks
@ashimaearthsky
@ashimaearthsky Месяц назад
OMG THANK YOU! I will never buy a cub cadet again, my first brand new mower in 30 years. So many issues @ 48 hours!!! This fixed my slow reverse!!! I am so grateful!!! My battery died after the first year. Never in my life have I had a battery die over winter. Any suggestions so this doesn't happen every year????
@happycamper5900
@happycamper5900 3 месяца назад
Perfect! This is exactly what I needed. Thanks.
@808airgunsbackyardaz6
@808airgunsbackyardaz6 Год назад
Amazing video again helping owner's to DIY it
@EliminatorPerformance
@EliminatorPerformance Год назад
Glad to help!
@christophertomlinson414
@christophertomlinson414 4 месяца назад
This was very helpful! Thank you!
@Big_Johns
@Big_Johns Год назад
Nice job Jake 👍
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks John!
@KirstenFickas
@KirstenFickas Месяц назад
Thank you that worked perfectly Can't believe it was that easy
@TLMD
@TLMD Год назад
Now that was awesome man! Thanks for that info brother! Keep up the awesome work!
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@davidellis7695
@davidellis7695 Год назад
What a great tip! Thanks for sharing this.
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@garmstr400
@garmstr400 10 месяцев назад
Excellent Video
@LewisMowersandBoats
@LewisMowersandBoats Год назад
Good to know thanks for the tip brother Jake 👍
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@craigh3332
@craigh3332 Год назад
Worked "perfectly" thanks for the video
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@Tommyr
@Tommyr Год назад
Another great video, thanks!
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks Tommy!
@JungleBobRepair
@JungleBobRepair Год назад
Good video, thanks for sharing the info!
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@ayyyoomarv
@ayyyoomarv Год назад
Worked for me. Thank you!
@roc89
@roc89 Год назад
Awesome another great video❤
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@TreeSawTTV
@TreeSawTTV 3 месяца назад
Great save!
@Bbendfender
@Bbendfender 3 месяца назад
Thanks. My Xt-1 is doing the same thing (won't move in reverse). I'm going to try this method.
@donaldsmith188
@donaldsmith188 4 месяца назад
Excellent! Great info, thank you. Subbed
@Rein_Ciarfella
@Rein_Ciarfella Год назад
Jake, the problems with your sound on a windy day are easily eliminated. Either purchase foam covers for all your mics or you can even make your own with something like prefilter foam and elastic bands. This same fix also works if you ever develop “s” mic overloads (known as sybilance), often caused by a mic placed too close to the speaker but also possible if the mic has the high end EQ tuned incorrectly.
@EliminatorPerformance
@EliminatorPerformance Год назад
I have a Sony camcorder with a professional mic that has a wind sock, but this was a rapid fire video I filmed with my phone. Quickly shot as I didn't have time to format an SD card and set it up. Too many mowers to fix lol
@michaelhudock8426
@michaelhudock8426 3 дня назад
Great Video Thanks
@maxrockatanksyOG
@maxrockatanksyOG Год назад
If you change the oil at the 50hr mark & not 200hr, it helps the tanny (can i use that word anymore) last longer. I asked my dealer to change the fluid- they didnt as it is a "lifelong oil", so will be doing mine this week
@henrymurawskibigdogrepair
@henrymurawskibigdogrepair Год назад
Thanks Jake
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching!
@jamiesawyer5102
@jamiesawyer5102 Год назад
That's a great tip
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks Jamie!
@redbull5181
@redbull5181 Месяц назад
I thought that we had a transmission problem on our mower, wouldn't go forward very good, it went backwards fine. It turned out that the mount for the rear axle had broken loose and was letting the belt have to much slop. So i reinforced the axle mount back on to the frame with a 3" piece of angle iron. I must have mounted the axle to far back because now the mower go's forward ok but reverse is weak.
@GeraldJensen
@GeraldJensen 3 месяца назад
Thanks!
@sweetlou5902
@sweetlou5902 Год назад
Thanks for the quickie Jake! Ha ha ha
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching Lou!
@roboverholt2035
@roboverholt2035 Год назад
I have a cub cadet 1050 with the 22 hp kawasaki I love it
@nicklloyd496
@nicklloyd496 Год назад
I’m going to try this and report back.
@GrampiesWorkshop
@GrampiesWorkshop Год назад
How's she goin'? Thanks for posting this. This sure is a good tip and a heart attack preventer eh!! LOL Take care!!!
@EliminatorPerformance
@EliminatorPerformance Год назад
Thanks for watching Grampy!
@MrGattor33
@MrGattor33 Год назад
Oh very nice and good info. Does this work for all hydro's like also on JD series??? Thanks for the video 👍🏼
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes it will purge the air out of any hydrostatic transmission
@shannonrusso5441
@shannonrusso5441 Год назад
Have a 2021 XT1 42” that stopped going forward or reverse. As I was driving it felt like something just let go. Have checked belt, pulleys, and bypass rod but found nothing. Think I’m still under warranty but wanted to know your thoughts so maybe I could avoid having to take it in for service. Thanks.
@ericmoss8344
@ericmoss8344 Год назад
Great tip!! I've had issues w/reverse for a couple years now on my Cub Cadet LT1042 (older mower I know) but it has the hydrostatic non-serviceable transmission. Will this air purge process be safe on my mower as well? I've wanted to service the tranny as I'm pretty sure the gear oil is worn out after all these years, but she still runs, just not like it used too.
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes it's perfectly safe for all hydrostatic transmissions, it basically just allows the hydraulic fluid to flow around it as it's in "bypass mode" and is recommended when the drive starts to lack. It's not a guaranteed fix, but it definitely helps most models that come in with weak reverse.
@ericmoss8344
@ericmoss8344 Год назад
@@EliminatorPerformance thanks. I'll be sure and give it a try this weekend.
@robertmailhos8159
@robertmailhos8159 Год назад
You had to burp the transmission 😂 she had Air in her tummy 😂
@philliphall5198
@philliphall5198 Год назад
Lololo that’s really what it’s about to
@robertmailhos8159
@robertmailhos8159 Год назад
@@philliphall5198 yes it is 👍
@EliminatorPerformance
@EliminatorPerformance Год назад
Just a bit by the looks of it, thanks for watching Robert!
@robertmailhos8159
@robertmailhos8159 Год назад
@@EliminatorPerformance your welcome young man 👍😎 (Jake)👍
@markvol11
@markvol11 11 месяцев назад
Does that work for the mower if it is slow in forward AND reverse?
@chevroletbartley6383
@chevroletbartley6383 14 дней назад
New here mate what does it mean when you can't re engage that pin that you pull out to put in free spin mode was going fine before hand pulled that pin now I can't re engage help
@EliminatorPerformance
@EliminatorPerformance 13 дней назад
It might just be dirty and or seized, the rod you pull is connected to a small lever on the transmission. Just follow it back and you can likely press it forward by hand
@richardstone5241
@richardstone5241 Год назад
What type and weight oil do these things use? Mine is a 2015 and has never had the oil changed nor is there any mention of this in my manual .....go figure!
@user-ud3bz2ib8q
@user-ud3bz2ib8q Месяц назад
So are we doing these steps with the lever still pulled
@EliminatorPerformance
@EliminatorPerformance Месяц назад
Yes, that way the transmission is in "bypass mode" so essentially you're just running the fluid through it, but not actually moving. It helps to purge the transmission oil from air, by allowing all the air bubbles to come to the surface.
@robk2670
@robk2670 Год назад
Does this only work on the Cub Cadet ?
@EliminatorPerformance
@EliminatorPerformance Год назад
No this works on any hydrostatic transmission, and I did this on a zero turn X Mark, although that was a little different because of the filter and external oil reservoir, but the steps are basically the same. Put trans into bypass mode and then run it forwards and back to get the air out of the transmission; ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-THp9D51Tu1Y.html
@robk2670
@robk2670 Год назад
@Eliminator Performance thanks for the info.
@mikepatten1373
@mikepatten1373 Год назад
I have a xt2 cub cadet LT46 and when the reverse switch is pushed to mow in reverse, the deck will mow for a minute then it cuts off and I have to press the switch again. Any ideas what might be wrong?
@mikekelsch9464
@mikekelsch9464 10 месяцев назад
after started, turn your key into the yellow position, push the orange triangle and leave the key in the yellow position while mowing.
@sweatinthedetails375
@sweatinthedetails375 Год назад
I have an XT2 with the Cub cadet fuel injector motor smokes like crazy when I 1st started up any ideas?
@EliminatorPerformance
@EliminatorPerformance Год назад
White or black smoke? If it's white it could be valve guides or valve stem seals, if it's black it could be an over fueling issue
@LaceyLutterbein
@LaceyLutterbein 3 месяца назад
Question for you (probably a dumb one)… I just bought a new Cub Cadet LT42. The reverse is not working or if it happens to work, it is VERY slow. I’m assuming there could be air in the lines from when it was assembled? I’m hoping I didn’t get a lemon. 🥴
@EliminatorPerformance
@EliminatorPerformance 3 месяца назад
Try the purge, it seems to work well on these "non-servicable" transmissions. They're basically fluid pumps, so any air in the hydraulic fluid makes them not work so great. The biggest complaint I get is weak reverse, and this usually fixes it.
@Mach141
@Mach141 11 месяцев назад
My 2015 XT1 has the K46
@Mach141
@Mach141 11 месяцев назад
I wonder why your XT1 had a hydro-gear?
@marcpuzier7130
@marcpuzier7130 Год назад
grass dirt build up by pedal stops often is problem for weak reverse
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes good point, this one was clear. I use compressed air to blow out all the debris on the mowers I work on
@user-xe8hx4jt8e
@user-xe8hx4jt8e 7 месяцев назад
I tried it but it pops out the pin in back
@EliminatorPerformance
@EliminatorPerformance 7 месяцев назад
Use a pair of vice grips/locking pliers to hold it
@toddsparks661
@toddsparks661 Год назад
How do you do this with a zeroturn hydro trany.thanks
@EliminatorPerformance
@EliminatorPerformance Год назад
You need to put each transmission into bypass mode by opening the relief valves. Watch the video I linked in the pinned comment
@philliphall5198
@philliphall5198 Год назад
Warranty should start from time it’s bought not when it was made Are you sure you’re correct ????
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes most likely, but my customer didn't tell me exactly when he purchased it so I'm just going off the manufacturer date. Basically saying it's experiencing issues and it's around 3yrs after it was built which I'm sure is no coincidence.
@gamertwisted
@gamertwisted Год назад
Attempted process, still weak/no reverse. It the hydrostatic toast?
@EliminatorPerformance
@EliminatorPerformance Год назад
Next I would check the drive lever on the transmission (what the pedal rod hooks up to) as it could have a large build up of grass behind it, preventing it from pushing back far enough to engage the reverse drive!
@CooganBear
@CooganBear 11 месяцев назад
Will this work on a John Deere? I have an LT150.
@EliminatorPerformance
@EliminatorPerformance 11 месяцев назад
If it has a hydrostatic transmission (hydraulic fluid pump) then yes it'll work!
@CooganBear
@CooganBear 11 месяцев назад
@@EliminatorPerformance Thank you for the reply. I'm going to try this today. My rider has been getting a little slow in the get go. The drive belt is tight, so hoping this will help.
@macmccune21
@macmccune21 Год назад
3 months out of warranty and anyone who "money is not an object" to will buy a new one. Planned obsolescence should be illegal. I don't expect companies to make 50 year lawn mowers but this is predatory
@waynestefinashen239
@waynestefinashen239 Год назад
I have seen a lot of push mowers that have lasted 30 and some 40 years (with proper maintenance ) but very rare to see a rider mower last that long even with proper maintenance mainly because of transmission failures.
@johnbaird2395
@johnbaird2395 Год назад
Does this apply to j Deere
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes any riding mower with a hydrostatic transmission
@johnbaird2395
@johnbaird2395 Год назад
@@EliminatorPerformance thanks so much
@kenhilson786
@kenhilson786 Год назад
My mtd with hydro gear takes 20w50 oil
@EliminatorPerformance
@EliminatorPerformance Год назад
Yes most call for synthetic too
@everardorodriguez8265
@everardorodriguez8265 10 месяцев назад
I don't think it's the same mower
@OIFIIIOIF-VET
@OIFIIIOIF-VET 22 дня назад
Hilarious considering I have the big Kohler and never had a problem.
@Mikael.formermilitary
@Mikael.formermilitary Год назад
How do I straighten the front wheels on my Cub Cadet XT1? Thank you.
@EliminatorPerformance
@EliminatorPerformance Год назад
Check the tie rods, they might need adjustment.
@Mikael.formermilitary
@Mikael.formermilitary Год назад
@@EliminatorPerformance How is that done? Thank you.
@EliminatorPerformance
@EliminatorPerformance Год назад
@@Mikael.formermilitary try watching this it may help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mpx0prQJ3D0.html
@mason4427
@mason4427 Год назад
Hey eliminator performance do u have any stickers you can send me if so what’s your email
@EliminatorPerformance
@EliminatorPerformance Год назад
Check our about page!
@waynestefinashen239
@waynestefinashen239 Год назад
Mason did you send us an email yet?
Далее
Cub Cadet Transmission Repair
15:35
Просмотров 200 тыс.
Cub Cadet XT1 Reverse Problem Fix
14:58
Просмотров 341 тыс.
Cub Cadet seat switch bypass
5:59
Просмотров 125 тыс.
Poor Man's Power Steering
19:19
Просмотров 109 тыс.
Cub Cadet XT2 (and XT1) maintenance, upgrades, mods.
14:30
Cub Cadet XT1 LT46"  Transmission Repair | Low Fluid
12:20
TUFF TORQ Hydrostatic Fluid Change K46 T40 John Deere
12:26
Tiny motor, big power
0:25
Просмотров 38 млн
КУАР КОД✍️
0:11
Просмотров 1,5 млн
Times Square
0:16
Просмотров 7 млн