Cummins N14 Injector Replacement, Diag and Procedure

Подписаться 79 тыс.

Просмотров 35 тыс.

50% 1

Thanks for joining us guys on the Renegade racing channel
Today we diagnosed a bad injector in a Cummins n14 in an old Freightliner
We decided to replace all 6 today we go over from start to finish injector replacement
Please subscribe to our channel we are always here to help with any questions about any job we can help you with
Check us out on Facebook tictok Instagram and Snapchat all at @civettelsx
Shoprenegade.com
Join us on our mission, and prepare for the coolest content on the net!!!! We are giving away some of the coolest things and all you have to do is subscribe to win!!!! Giveaways, Racecars, How to's, DIY's, Jokes, and more!!!
We go all over to bring you the best content on the web!!! Please visit our store for race gear, parts and more! Personally I think the models looked better, but everyone has their style no hate here only love!!!
📲 Facebook: m. CivetteLSX/?re...
📲 Instagram: / civettelsx
📲 Tiktok: www.tiktok.com/@civettelsx?la...
If you enjoyed this racing video channel and feel that is interesting then keep connected with us. Make sure to LIKE👍 the video and COMMENT💬 your opinion because your opinion matters to us.
Watch more of ours special videos:
📺 • The Gap Cleetus Saga C...
📺 • World’s Fastest Chevy ...
📺 • Successful Story Of Li...
📺 • Import Alliance Nashvi...
📺 • Cleetus McFarland runs...
📺 • Cash Days 2021 Clarksv...
📺 • Camaro Fest 2021! Drag...
📺 • Installing injector cu...
📺 • Donk on big rims absol...
📺 • Diagnosing and injecto...
SUBSCRIBE to our channel and make sure to click the BELL 🔔 ICON, so that you won't miss anything!
#cummins #cumminsn14 #injector #replacement #diy #howto #cumminsinjector #injectors

Авто/Мото

Опубликовано:

2 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@justingarrett7111 2 года назад

Great breakdown that actually gives good detail! Thank you

@StickShiftRacing 2 года назад

Glad it was helpful! thank u

@quiteaskew279 Год назад

Great video from the hands of a pro. Also it looks like a beautiful day

@akbarshoed 5 месяцев назад

This is a GREAT video! So real. So honest. Thanks!

@larryneumann5003 9 месяцев назад

Thank you great video

@williamkaono1239 Год назад

Great tutorial. Ive got a N14 also and this was very helpful to know in the event if I should come across with the same problem. Thank You very much

@StickShiftRacing Год назад

Great to hear!

@henrybarnett364 Год назад

I have a N14. Where is a good place to buy injectors an what’s a idea price range for them

@cirdrahcliwsirrom7077 Год назад

Excellent video 👍🏿👍🏿

@StickShiftRacing Год назад

Thanks for the visit

@robertomandozo8979 2 года назад

That's a great job

@StickShiftRacing 2 года назад

thanks bro

@JakeNaughtFromStateFarm 2 года назад

I e done a few MaxxForce, but haven’t actually changed injectors on a Cummins yet. I may have one coming up soon. This’ll give me an idea of what it is. Thanks for that.

@StickShiftRacing 2 года назад

any questions let me know

@JakeNaughtFromStateFarm 2 года назад

@@StickShiftRacing Will do. Appreciate ya.

@williamharrison4900 Год назад

Do the injectors have anything else on them besides orings when going back together? No brass washers or anything?

@77rehenderson 4 месяца назад

What about the top end of it, the injector height, does it need adjusting or is it pre-set?

@user-jg9fn3up2i 8 месяцев назад

How many footpounds to torque the injector bolt.

@mindykaywatson9070 Год назад

Thank you for the video. I see that you started the motor with the valve cover off. The guy that put my injectors in did the same thing and oil sprayed everywhere like the Beverly Hillbillies!!! Is the indicative that he did not have something seated correctly? Also is there a special tool that must be used to set the valves to a particular measurement? I am just needing a little insight. We replaced all six and now I have 2 that are missing (1 and 5). At this point I can't even get it to a shop if I wanted too.

@StickShiftRacing Год назад

Yes something wasn’t correct

@killnconquer2645 Год назад

Do you need to run an overhead or is it okay to leave as is?

@Mssmounia 6 месяцев назад

How do you find the top dead center?

@jopete681 Год назад

😊

@vinaydiesels Год назад

From India , can someone tell us about Cummins N14 actuator ... We are facing RPM, humming & frequency issues, Engine stop immediately after starting... The Indian version of N14 Cummins is looks different

@rogerwilliams2951 2 года назад

Aren't you suppose to tighten the injector then loosen then torque to 30 ftlb to prevent timing plunger from sticking?

@StickShiftRacing 2 года назад

yes if your going by the book this is diy on the side of the road

@rogerwilliams2951 2 года назад

@@StickShiftRacing if you do it right the first time you shouldn't have to do it again .I was taught to do is all .

@qak5995 Год назад

actually you want to pop the injector into the hole if you rotate it the orings could get cut just give it a good tap down and itll seat good. Make sure your orings are coated in engine oil

@StickShiftRacing Год назад

yes

@michaeljimenez7830 4 месяца назад

For what reason why he dont adjust the valves?

@allenpardon8211 2 года назад

It sure would be nice to hear the torque value’s for someone that has not done a million of them.

@StickShiftRacing 2 года назад

I’ll make sure I start including it my bad bro sometimes im just rushing to knock em out and record at the same time

@tatehoupt9479 2 года назад

Injector hold down is 30 ft pounds

@patrickcrowe4063 Год назад

Alright.

@yezyezyez21 Год назад

What’s a normal oil pressure on this engines mine do 15 idle & 30/35 driving this is Normal ???

@StickShiftRacing Год назад

as the engine wears yes … your getting to a point the you will need an in frame

@daleabed2145 2 года назад

Should not pull in new injector in with the hold down.

@michaeldunagan8268 2 года назад

Since you are so concerned about bending a push-rod, why not bar the engine over with a breaker bar on the dampener nut?

@StickShiftRacing 2 года назад

I’m not running overhead and I’m confident on seating the pushrod however that’s a good point I’ll make sure to include that in the next video

@Go4BrokeOffroad 2 года назад

Where did you get the injectors?

@StickShiftRacing 2 года назад

from a website now sure

@joetorres2363 Год назад

I think I’m gonna try it myself I mean Wts the worst that can happen…

@StickShiftRacing Год назад

exactly

@jacdavis9603 3 месяца назад

I knew I recognized that trk…. Gary cool af 😎….great video sir

@jimbobstrzelecki1675 2 года назад

Where r u located??

@StickShiftRacing 2 года назад

Clarksville tn

@duvasio4204 2 года назад

how much did you charge him?

@StickShiftRacing 2 года назад

200 bucks

@duvasio4204 2 года назад

@@StickShiftRacing yea? my mechanic charged me 400 but that included a tune up...

@michaelgeurink4422 2 года назад

What exactly do you mean by tune-up? Adjusting the overhead? Traditionally a tune-up has meant replacing the ignition condenser, adjusting or replacing the points, cleaning and gapping the spark plugs and replacing plug wires, coil, cap and rotor as necessary. Almost none of this is required in modern gasoline engines, but people still say "it needs a tune-up." And none of it applies to a diesels, so I'm just curious what your mechanic meant by saying he did a "tune-up" and charging you an extra $200.

@duvasio4204 2 года назад

@@michaelgeurink4422 setting the overhead