CURVED Plywood Chair Using BENDABLE PLYWOOD and Veneer

Подписаться 800 тыс.

Просмотров 267 тыс.

50% 1

New Audible members get a 30-day free trial. Visit audible.com/tamar or text "tamar" to 500 500 to try Audible today!
Huge Thanks to Woodcraft for sponsoring me and what I do, I could not make these videos without them! If you are looking for high-quality tools, check them out here -
Or check out the specific tools I used listed below!
For more details, check out my website - www.3x3custom.com/tutorials/c...
Video on Milling Lumber Without a Jointer - • Milling Rough Lumber W...
____
WOODCRAFT LINKS
Bandsaw:
bit.ly/PowermaticBandsaw
New Miter Saw Blade:
bit.ly/WoodRiverMiterBlade
General Purpose Thin Kerf Blade:
bit.ly/WoodRiverGPThinKerf
Tracksaw:
bit.ly/TrackSaw
Electric Hand Planer:
bit.ly/TritonMiniPlaner
Chisels:
bit.ly/2Vmudic
Low Angle Jack Plane:
bit.ly/No62LowAngleJack
Sander:
bit.ly/MirkaDerosSander
Veneer Saw:
bit.ly/VeneerSaw
Veneer Tape:
bit.ly/VeneerTape
Extended Open Time Glue:
bit.ly/ExtendWoodGlue
Veneer Glue:
bit.ly/VeneerGlue
AMAZON (affiliate) LINKS
SHAPER ORIGIN:
amzn.to/3y8Y2Th
Dust Mask:
amzn.to/3w6plfk
Trim Router:
amzn.to/33IeEU2
Plywood Carrier:
amzn.to/3tHCfi1
Ratchet Straps:
amzn.to/3hkThA5
Double-Sided Tape:
amzn.to/3brPVaO
Milk Paint:
amzn.to/3ybcMkE
Furniture Finish:
amzn.to/3hpbAE8
4x4 Sheet of Bendable Plywood:
homedepot.sjv.io/a1OMxN
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)

Хобби

Опубликовано:

13 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@jebowlin3879 3 года назад

plywood that bends, you could say it's ... Ply-able wood LOL ... I'll see myself out

@3x3CustomTamar 3 года назад

😂

@spy2778 3 года назад

🤣

@nkumar1 3 года назад

Ply that comply?

@jeremyspecce 3 года назад

I remember we were working with this stuff once and a guy was working with joked “some people call it wiggle board but I call it GIGGLE board!”

@mattyallwood 3 года назад

High five good sir🤣

@kellycumpson7465 3 года назад

I love that you show us the entire process, including the mistakes you made. It's so encouraging to see a woman doing the stuff you do, I love wood working too :)

@3x3CustomTamar 3 года назад

Thanks so much! Making mistakes is the only way I learn.

@mattomon1045 3 года назад

@@3x3CustomTamar she not afraid to fail and change the design to make it work

@marianasandoval8224 3 года назад

I’m 19, I don’t have any wood tools, but your videos are my new obsession.

@3x3CustomTamar 3 года назад

One day!

@bryanvandyke0 3 года назад

Check out garage sales and Facebook marketplace. You can pick up inexpensively a circular saw and a drill. Like $60 combined. There are a lot of projects you can make with just those. Also a large rafter square will help you make square cuts. They're fairly inexpensive at your local big box store. Also also. If you hit up the goodwill auction site and filter by your local pickup site you can sometimes get a random lot of generic tools for almost nothing.

@blaugrana-jw3dd 3 года назад

Drill, Jigsaw, Circular saw, Orbit sander, Router and you're good!!!

@Robinlarsson83 3 года назад

As others have said, you dont actually need all that many or expensive tools to get started, and in fact you can do some very advanced projects with just a few basic tools like a few chisels, a hand plane, a drill, and either a jig saw, circular saw or even some reasonable hand saws like the japanese style pull-saws. It depends very much on what you want to build, different projects can require different tools, but you can get very far with the basics :) A nice router is always nice to have, I have the corded version of the Makita that Tamar is using, and it is great, but a bit pricey, a cheap one (~50 USD) get you very far. I started collecting tools when I was a few years younger than you, it can be great fun and can easily get a bit expensive :) Good luck and hope you take up woodworking!

@marianasandoval8224 3 года назад

Thank you all so much for all the tips and advices! I actually live in Mexico where it’s a little bit expensive to get wood and tools. And also the comment was meant that I don’t actually have an interest in building things myself but Tamar’s videos are so relaxing and her vibes are so sweet that I’ve been hooked to her channel even though I don’t do things like that. But again thank y’all for taking the time to comment and be willing to help others!

@joetamel709 Год назад

First time watching one of your videos. I am not a beginning woodworker but definitely not a pro. I love that you show the struggle and nervousness I encounter when attempting a new technique. Not many content creators will do that. Having a project close to finished and having to make a critical cut is one of the most nerve-racking things one can experience! Thanks and I'lm looking forward to watching your other videos.

@GregoryJones9038 3 года назад

Just wanted to say thanks for all you've done on the channel, actually learning a ton from you. I've done some woodworking in the past and carpentry, but want to get into more furniture making, and you've been a huge wealth of knowledge. So thanks for all you're doing!

@3x3CustomTamar 3 года назад

Awesome to hear

@tompoole7480 3 года назад

You are an amazing woman. I have been watching your channel for about a year. I love watching how fearless you are at tackling new challenges in front of us. You are an inspiration for all (even a 67 year old retiree) of us. Thank-you.

@chrisstearns10 3 года назад

How is she fearless when she says she is scared to make a cut?

@3x3CustomTamar 3 года назад

So awesome to hear! Thanks!

@tree_carcass_mangler 3 года назад

@Tom Poole, agreed.

@grassh0pperunit 3 года назад

@@chrisstearns10 I think it is brave to admit your fears, especially in a public forum. She was also able to pull the cut off, too.

@neversaynever7438 Год назад

@@chrisstearns10 Being scared and still doing it is the fearless part!

@setphaser 2 года назад

gorgeous! i love bucket chairs so i’m looking forward to your next one! also LOVE THE CURLIES OFF THE PLANER!!

@spencerjuk 3 года назад

Fantastic again! Please don’t ever change what you are doing for videos. I love the way I learn by watching you learn. Most other youtube woodworkers like to teach and appear superior. Your learning as you go is far superior and leaves me in awe! Loved the use of the template at the end to round the corners, but I was sure you were going to get crazy with the shaper to make a fancy shape for the arms.

@3x3CustomTamar 3 года назад

Thanks so much! Considering that was my fourth cut ever with it, I’m taking it slow... ha

@harshitajain349 3 года назад

I recently found your channel and have literally binged watched so many of your videos! They are so interesting and the fact that you show how to do each step and the way your solve your problems is just Amazing 💕

@3x3CustomTamar 3 года назад

So glad you like it. Thanks!

@onlineda1 3 года назад

Great job Tamar. You’re always pushing yourself. New techniques. Yes, scary but it usually works out. I love how you share your journeys through these new projects. You’re so talented

@3x3CustomTamar 3 года назад

Glad you like it! Thanks!

@osomxl 3 года назад

There is nothing like that feeling you get when you step outside of your comfort zone and then have success. I love your content for that reason. I can feel your frustrations and then get to revel in your triumphs! You are growing by leaps and bounds and I hope to do the same as I venture back into the world of cabinet and furniture making that I used to belong to.

@3x3CustomTamar 3 года назад

Always fun to learn as you go!

@elijahmcstotts2871 3 года назад

This chair is awesome! Great work and also, good on you for not letting ego get in the way of figuring out how to do it better next time. I love watching you work for that reason just as much as to see the cool, things you create. Please keep it up and continue to inspire those of us still starting out.

@3x3CustomTamar 3 года назад

Awesome to hear! I learn with every project I make. Just how it goes

@Fidens1 3 года назад

I love your projects and your candor. Thanks for sharing your stories with us. Also, your hair at 4:02 is on point!

@3x3CustomTamar 3 года назад

Haha thanks!

@themessytriathlete 3 года назад

My 4 year old son walked by: “Dad, I don’t know why she’s fighting the letter U, but she’s not winning” 🤣🤣🤣

@3x3CustomTamar 3 года назад

Hahaha! It almost beat me!!

@ioannisaliazis 3 года назад

🤣🤣🤣🤣🤣🤣

@cabman86 3 года назад

I laughed so hard seeing that.

@dennyewing9544 3 года назад

Thank you for the explanation of the shaper tool. I have seen it used before, but you are the first to explain how it works. Enjoy your channel very much.

@3x3CustomTamar 3 года назад

It’s sooooo cool!!

@omnaraiya 3 года назад

Glad to hear about your continued interest in guitar. Your great guitar build off entry from last year was my favorite by far. Hope to see more instrument builds!

@3x3CustomTamar 3 года назад

Working on one right now!

@DanteYewToob 2 года назад

With a form that shape, I would try some 2x4 shims under the straps to push the plywood into the form. Hindsight is 20/20 though, and you did an INCREDIBLE job with this. I have aspergers and I'm prone to panic and anxiety and dealing with that glue up, the veneer.. oh my god. You are truly an enlightened human being for not just burning the workshop down and running away like a crazed animal frothing from the mouth screaming... because I would have done that exact series of actions and more. But I'll just continue to watch and share my unsolicited advice to someone much more skilled than I am... like a good RU-vid viewer should!

@mattheffron391 2 года назад

I was thinking along the same lines. 2x4 seems like more than necessary. 1x2 might be fine. But probably put some thin padding between the caul and the plywood or veneer. (Like the router pad that's to keep pieces from slipping while routing.)

@ianc1097 3 года назад

That is not a piece of furniture. It is a work of art. I can imagine how stunning it would be to have them around a dining table.

@3x3CustomTamar 3 года назад

☺️☺️☺️

@LewHarriman 3 года назад

What a happy moment when that seat slid into the dado so perfectly! Congrats on completion of a tough build. And I really appreciate that short section using the sandpaper-backed straight edge and veneer saw to rip long cuts without the potential problem of a knife that gets caught in the grain and goes askew of the very long straight line you needed.

@3x3CustomTamar 3 года назад

It was so exciting! Glad you liked that!

@qualidadewmetal3592 Год назад

Tamar!! I'm in awe of the cool tools you have!! It helps a lot!!

@mariah8200 3 года назад

“I just had to blow some bees away” *vroom vroom* 😂😂😂😂😂😂 that killed me

@3x3CustomTamar 3 года назад

I do this daily... just never caught it in camera before 😂😂

@NiHaoMike64 3 года назад

@@3x3CustomTamar Maybe see if there's a beekeeper in your area willing to relocate the bees to a better place?

@3x3CustomTamar 3 года назад

@@NiHaoMike64 oh! You don’t even know the story! Our neighbor has a beehive INSIDE THEIR CHIMNEY!! This chimney faces my garage. When I told them about it, to be a nice neighbor, they responded with “ohh yeah... we have been cohabitating with them for years...” I have tried to get people to come remove it for them and they won’t.

@sivathenu7419 3 года назад

@@3x3CustomTamar Your neighbors are from the woods. 😅 Keep plants (like eucalyptus, mint, marigold, cucumber, basil or pitcher plant) that repel bees 🐝🐝🐝🐝🐝 👍

@VGInterviews 3 года назад

@@3x3CustomTamar Santa must hate visiting that house, I bet they just want the free honey

@Kust0r 3 года назад

Finally the whole making! So much hype... Such a good looking chair, it's so neat it seems a 3d render. Kudos!

@3x3CustomTamar 3 года назад

Thanks so much! It was fun to create

@woodman3416 3 года назад

I so enjoy your videos. You always show the good, the bad and the sometimes oh crap moments. The chair turned out lovely. I like listening to your explanations as you go along. You have the sweetest smile. Look forward to your next project.

@3x3CustomTamar 3 года назад

So glad you like it. Thanks!

@ricardolacza 3 года назад

Love the way you explain the difficulties and your creative process. Thanks for sharing with us.

@3x3CustomTamar 3 года назад

Glad you like it! Thanks!

@jazzgod21 3 года назад

As many times as ive heard Tamar say "i forgot to do X before i did Y" makes me think she is my spirit RU-vidr

@3x3CustomTamar 3 года назад

Haha! Happens to us all

@jamesbecker7175 3 года назад

This is how I’ve made shields for years, but with traditional plywood and ratchet straps

@DanteYewToob 2 года назад

Just casually drop "I've made *shields* for years... " with no further elaboration. Cool. Cool cool cool. I'm not insanely curious or anything. I'm fine, it's fine. That's fine. Modern dude making wooden shields. Perfectly normal. ;D

@ribbontoast 3 года назад

I was feeling I was going overboard and a little crazy with the project I worked on today and then I sit down and turn this on and you're like routing the inside of a U shaped pile of plywood while climbing on your workbench. I love this whole thing.

@ribbontoast 3 года назад

OH MY GOSH that bendy circular saw cut

@3x3CustomTamar 3 года назад

😂😂😂😂

@designer-garb572 2 года назад

Your videos are very easy to watch and most enjoyable.

@cguy1970 3 года назад

I think your inner 5 years old self showed up when you realized it didn't stick to the template ;)

@3x3CustomTamar 3 года назад

@johnford7847 3 года назад

Beautiful work. I love hearing your thinking about the design and construction process as you work. Thank you.

@3x3CustomTamar 3 года назад

Awesome to hear. Glad you like it!

@judih.8754 3 года назад

Tamar you are awesome. I love this project and how you adapt as you go, not getting (too) frustrated with setbacks. Thanks for sharing 👍.

@3x3CustomTamar 3 года назад

Glad you like it!

@TheDesignerXD 3 года назад

I love your videos. You always make something new and interesting. You and Pask Makes are two of my favorite woodworking channels for completely original content. Cheers!

@3x3CustomTamar 3 года назад

So awesome to hear. Thanks!

@peggyraun-linde6336 3 года назад

What an adventure! Great job. Love the paint color choice too. Inspiring build. Thanks for sharing!

@3x3CustomTamar 3 года назад

So glad you liked it! Thanks!

@DavidSmith-qf4zj 3 года назад

Love your videos. Your videos are so interesting because of your excitement and also that you are trying out new process that you bring us along to learn and try with you. While a vacuum bag and press can be invaluable, you will still run into problems and there is a learning curve. A vacuum press doing flat work is pretty straight forward, but not so for a bag which creates it's own problems. There are other glues you can use with a vacuum setup that will allow more open time which is helpful. I can't wait to see your video when you are trying a vacuum bag out.

@duckbrother2duckbrother246 3 года назад

Great project! I loved the end with the cut scenes - especially the bees!

@kegboy12 3 года назад

Very cool chair. Amazing how something that looks so simple can be so much work! I like how you go through the design considerations and changes you make as you progress through the project.

@3x3CustomTamar 3 года назад

Sometimes it’s the simplest things that are the hardest to achieve. Glad you liked it!

@petriepretorius4085 3 года назад

you wood only continue to amaze me...thank you, everything you do with wood resonates with my creative...it is stunning...

@3x3CustomTamar 3 года назад

Thanks so much!

@robertmahnke1671 3 года назад

What a great project! The pure joy u express while building really gives ur videos an awesome vibe. I am always looking forward to your videos! Greetings from Germany!

@3x3CustomTamar 3 года назад

Thanks so much! Appreciate that. Someone recently told me to stop laughing in my videos... 😂

@tree_carcass_mangler 3 года назад

Great job as usual, in both design and execution. And also, thanks for the overview of the Shaper Origin. Thumbs up!

@3x3CustomTamar 3 года назад

Thanks so much! So glad you liked it!

@JP-mq7pg 3 года назад

Seeing the seat slide in and fit as intended was so satisfying to watch. Great work on coming up with fix's for fix's.

@3x3CustomTamar 3 года назад

Haha imagine actually doing it. Ha thanks!

@robertpshaw 2 года назад

I am very impressed by your bold and confident attitude, thinking about your comment about this being your third Shaper Origin use. I have most of the same tools, but am completely humbled by your tenacity and flexibility in the face of adversity. I found this searching for bent plywood techniques, thinking of the pretzel chair, and I was entertained and educated thanks to your efforts. My personal experience is that I acquire the skill set I needed at the beginning of a new project by the end of the same project. I see a little of that going on.

@3x3CustomTamar 2 года назад

Awesome to hear!

@tomgrillo1550 3 года назад

I love your enthusiasm and candor. Great project.

@3x3CustomTamar 3 года назад

Thanks so much!

@Mansour-Al-Amin 11 месяцев назад

Quality video for sure. Much needed for someone such as my self who is building confidence to make my own fine furniture outside of my regular shop hours/setting. Cheers 🍻!

@Mansour-Al-Amin 11 месяцев назад

also Mirka sanders are primo 👌

@3x3CustomTamar 11 месяцев назад

Glad you liked it!

@michaelhayhoe2540 3 года назад

Fantastic idea and wow-able chair build! I really like your honest presentation and comments during the build. You're my favorite "real word" maker!

@3x3CustomTamar 3 года назад

So awesome to hear! Thanks!

@jerrystark3587 3 года назад

An interesting and challenging project. Well done. Thanks!

@3x3CustomTamar 3 года назад

Thanks so much! Always fun to challenge yourself

@AJ-ln4sm 3 года назад

What a great project! Cool to see you learn as you go. Keep up the great work 💪

@3x3CustomTamar 3 года назад

Thanks so much!

@carmenponcedeleon2693 3 года назад

This is unbelievably gorgeous! Tamar! You are the WOMAN! When you put the chair in the corner along with your other furniture art, was a chef’s kiss moment! Damn! This is inspiring! Thank you for sharing! And I would love to purchase this chair ASAP!😍

@3x3CustomTamar 3 года назад

So glad you like it! Maybe one day I can streamline the process and that could be a possibility ☺️

@cioiart1 3 года назад

I really appreciate your work and the way you explain what you do. As a beginner hobby woodworker, I learn a lot from your videos. Thank you!

@3x3CustomTamar 3 года назад

Awesome to hear!

@tatepishepard 3 года назад

I love you and your inspirational style. Thanks for sharing your work. Awesome content. Hugs from Hungary

@3x3CustomTamar 3 года назад

So glad you like it. Thanks!

@TheZanger 3 года назад

Oh boy. That outside veneer job brought back memories from when I was still in school.

@cqsqaqwq 3 года назад

It’s so rewarding when you can solve all the little problems that arise with a project like this. Excellent job👍

@3x3CustomTamar 3 года назад

Totally agree! Thanks!

@Gojirosan 3 года назад

Absolutely fantastic! Interesting process and marvellous result. Superb video!

@3x3CustomTamar 3 года назад

Thanks so much! Glad you like it!

@kiwdwks 3 года назад

All & all you worked through the process. Every project you learn something. For curved work a vacuum bag makes the difference. Just make sure the forms you build that go in a bag are stout so there is no chance of collapsing. Shaper Origin is a great tool addition to the shop. As you know, it will help with templates, cutting irregular shapes, engraving etc. Allows you to up your game. Love your willingness to try things you've never done as well as your enthusiasm. Keep making Tamar!

@3x3CustomTamar 3 года назад

Thanks so much! Yeah. I’m excited to see everything it can do!

@howimake1 2 года назад

This turned out great, nice job. Great videos. Thank you!

@3x3CustomTamar 2 года назад

Thanks so much!

@mikelownsbro2876 3 года назад

Thanks for your videos Tamar, I really enjoy watching them!

@3x3CustomTamar 3 года назад

Awesome to hear!

@lequitahicks9076 2 года назад

I enjoy your videos. I enjoy how when you make a mistake, you leave it in your recording. I'm not a woodworker but I enjoy watching videos. Your projects come out great all the time. Continue to inspire young girls to create with their hands.

@3x3CustomTamar 2 года назад

Awesome to hear!

@armanzd.i.y.511 2 года назад

Wheew..another awesome project of Tamar..I am just a newbie in woodworking and still lack a lot of tools..but as I watch your videos and the others..the desire is burning..THANKS A LOT FOR SHARING..

@3x3CustomTamar 2 года назад

Glad you like it!

@armanzd.i.y.511 2 года назад

@@3x3CustomTamar Inspiring..take care

@evanpatterson9379 3 года назад

Your creativity and problem solving is so inspiring. Thank you!

@3x3CustomTamar 3 года назад

Awesome to hear 🤘

@DwellAware 3 года назад

Wowww, this turned out so beautiful!!! Amazing job 👏🏽🔥

@3x3CustomTamar 3 года назад

Thanks so much!!

@andrewrichardson7112 3 года назад

Just love the way you put these methods across Tamar.... your style make learning joinery fun and cuts through the usual nonsense... just keep making these inspirational videos...

@3x3CustomTamar 3 года назад

Awesome to hear! Thanks!

@cheeseheadfiddle Год назад

Always so good. You rock, again!

@joelcopeland3018 3 года назад

I always enjoy your videos... I always were that smile, and the sparkle in your eyes show your passion for your work. Nice chair... great video. Keep them coming...

@3x3CustomTamar 3 года назад

So glad you liked it! Thanks! ☺️

@toolebukk 3 года назад

This work is amazingly impressive! I am in awe!!

@3x3CustomTamar 3 года назад

Thanks so much!

@benraf 3 года назад

As always, a very nice job, it is a lot of fun to watch you on the projects. I wish you many more ideas. I'm looking forward to your new project. Warm greetings from Germany.🙋‍♂️

@3x3CustomTamar 3 года назад

Glad you liked it!

@richierich4810 7 месяцев назад

Wow! Masters at work.

@tomhostetter8516 3 года назад

You Ma'am are on a Different Level... That was fantastic! Your Creativity never cease's to amaze me... have a wonderful weekend Tamar.

@3x3CustomTamar 3 года назад

So glad you liked it! Thanks!

@reforzar 2 года назад

Always kicking butt and taking names! Killer project Tamar!

@3x3CustomTamar 2 года назад

Thanks Brian!

@romeoC9968 3 года назад

Another great built...outstanding! One of the best things is you're not afraid to show when things don't go as planned.

@3x3CustomTamar 3 года назад

Thanks so much! It’s how I learn

@birdbandit9 3 года назад

You rock, Tamar! I like how your videos show how your brain works....like taking us on a ride from concept to execution. Very inspirational!!

@3x3CustomTamar 3 года назад

Thanks so much! My brain is kinda crazy. Ha

@federicosalinass.8051 Год назад

I always learn a whole lot of stuff at your carpentry shop, also love your amazing jigle saw that only uses battery brand dewalt... I do not think would be able to have one for the time being,but appreciate to see it you used it...thank you beautiful lady...Greetings from mexico,coatzacoalcos,veracruz.😀😀😀🤗🤗🤗

@Scottydawg777 3 года назад

you explain things very well by the way

@dennishinkle5010 3 года назад

This is just lots of fun. You did a great job. Thank you for a great video.

@3x3CustomTamar 3 года назад

So glad you liked it. Thanks!

@ShopTherapy623 3 года назад

Wow! A ton of work! Looks amazing

@3x3CustomTamar 3 года назад

Thanks so much!

@scottgoodsell8227 3 года назад

Great job. Love that you take so much risk or New techniques

@3x3CustomTamar 3 года назад

Thanks! Always fun

@geoffedwards189 3 года назад

I enjoyed this so much Tamar. But then I always do! Take care and keep smiling.

@3x3CustomTamar 3 года назад

So awesome to hear! Thanks!

@BeckyStern 3 года назад

Awesome chair and process, thank you for sharing!

@3x3CustomTamar 3 года назад

Thanks so much! Glad you liked it!

@johncawsey9999 Год назад

what a talented young lady keepup the good work

@Leondc123 3 года назад

Great Video. Great project. Great execution. I love to see your videos. Brazilian guy watching your videos here. Thank you.

@3x3CustomTamar 3 года назад

Thanks!

@YannRetout 3 года назад

Nice piece, thank you for sharing you experience building it.

@3x3CustomTamar 3 года назад

Glad you liked it!

@shadwellsong 2 года назад

THis is delightful, I love when you succeed and get so happy! Thanks Tamar!

@3x3CustomTamar 2 года назад

Glad you like it!

@barrettbryan8905 2 года назад

That 'Shaper' is awesome and I need one!! I don't have the space for a big CNC in my shop (have wayy too many tools and junk in the way) but something like that would most definitely get a ton of use!! Thanks for sharing!

@3x3CustomTamar 2 года назад

It’s so cool

@omartorres7864 3 года назад

Thank you for sharing with us , u are such an inspiration , I hope I can use some of your projects in my small shop

@3x3CustomTamar 3 года назад

Glad you liked it!

@X3WorkshopDesigns 3 года назад

Wow! I'm completely blown away at how awesome that came out. The milk green paint on the edges definitely made it pop more in my opinion. Thanks for sharing Tamar! Kick ass!

@3x3CustomTamar 3 года назад

Thanks so much! Yeah! I’m happy I decided to paint it instead of making edge banding of the same material

@sgsax 3 года назад

First of all, this is a really cool looking chair! Second, great display of a variety of techniques here with a lot of potential applications. All-over a great video! Thanks for sharing!

@3x3CustomTamar 3 года назад

So glad you liked it. Thanks!!

@raz1572 2 года назад

The single line of green along the edge looks great!

@3x3CustomTamar 2 года назад

Thanks!

@kevinbenedict5443 2 года назад

Beautiful project. That shaper router thing is super slick. Cant wait to see what u do with it.

@3x3CustomTamar 2 года назад

It’s so cool

@luizaugustogoncalvesflores3940 3 года назад

Girl! you're amazing!! Even when you say "its OK for me" I only can see how great it is; the entire process is amazing ... as you are!

@3x3CustomTamar 3 года назад

☺️☺️

@martijnaalbers3705 3 года назад

Awesome project, love the experimenting you have been doing lately!!

@3x3CustomTamar 3 года назад

Thanks so much! Only way to learn!

@jcrroadie 5 месяцев назад

Very cool! I’m watching videos on this process because I want to build large floor standing speakers and use curved sides instead of a boring rectangle cabinet. I got excited when you said bendable plywood chair because my mind immediately went to the Eames chair. You should make one of those!

@GreenDayFanMT 3 года назад

Absolute beautiful chair. Very inspiring

@3x3CustomTamar 3 года назад

Thanks!

@edwardcullen606 3 года назад

As I watched there were a number of thing I wanted to comment on. I kept watching, you addressed almost all of them. You are really learning a lot and achieving great skills. The one thing to really complicate your build is I think chairs need a slight pitch on the seat to be comfortable, but with a nice cushion it will be comfortable. I have so much fun watching your videos please keep them coming.

@3x3CustomTamar 3 года назад

Always learn as I go. And this chair is actually really comfortable. My kids have been fighting over it. Ha

@edwardcullen606 3 года назад

@@3x3CustomTamar The next ones will be easy.

@kalebjackson1158 3 года назад

Lots of hard work, but it looks awesome now!!! Thanks for sharing.

@3x3CustomTamar 3 года назад

Glad you like it! Thanks!

@jakeshearer3181 2 года назад

I love ur woodworking vids, keep it up!

@3x3CustomTamar 2 года назад

Thanks so much!

@paulmaryon9088 2 года назад

What a great project and vid, really enjoyed thanks, and OMG Tamar got to get me one of those Shaper Origin tools, how cool is that thing?! Thanks again, keep safe and well, and keep 'em coming!

@3x3CustomTamar 2 года назад

So glad you liked it! Yeah. It’s a really cool tool

@camillewing4507 3 года назад

I love the way your mind works!!! Great videos.

@3x3CustomTamar 3 года назад

Thanks so much!

@arturomty9969 Год назад

I love your channel and love you too with all due respect, great job!

@smp301 3 года назад

The chair turned out amazing Tamar you are amazing and talented 👍🏼

@3x3CustomTamar 3 года назад

Thanks so much!

@mglittletonjr 3 года назад

Thank you so much for showing all your creativity and mistakes and ingenuity and skill all in one place. Your videos are fascinating not only to me, but to my teenage daughter who sees that a creative streak can be applied to woodworking...even for a woman. Too many of the videos and articles that I show her are men who, while talented, don't give her a good enough role model to explore traditionally "manly" things. Thanks to videos like yours, not only can she see a full process from idea to implementation, but she sees that she can have every expectation to be in "my space" in the garage making cool things.

@3x3CustomTamar 2 года назад

So awesome to hear! 💪💪💪

@davedavem 3 года назад

Great build! And that handheld CNC is magic!

@3x3CustomTamar 3 года назад

Seriously magic. Thanks!

@johnbrock1602 2 года назад

I love your honesty when you change plans. I use to do that a lot of the time. Now I do not do that very often any more. I am 74yrs an can’t Stan any longer then 2 mins my back can’t take it.