Custom Function EXPLAINED - XENO3 Lightsabers massive update -

Подписаться 1,4 тыс.

Просмотров 2,2 тыс.

50% 1

Hello there 👋
New tutorial to get a first look at the new XENO3 app function : "Custom function".
Comes with the latest app update as well as the 1.3 lightsaber firmware. It allows you to customise your controls and create different lightsaber control profiles. Those profiles are saved to your Xeno3 app and can be applied to any lightsaber you connect to.
Amazing work from Nexus Sabers and Darkwolf on the software evolution. The Xeno3 board is definitely capable of more than meets the eye.
This new function is now available to all XENO3 lightsabers purchased with us at www.thesaberfactory.com
May the Force be with you.
Kevin
www.thesaberfactory.com
-----------------------------------------
00:00 Intro
01:01 How does it work?
01:48 Creating a new profile
03:10 Basic action setup : single control
05:37 Difference between "each time" and "1 time" actions
08:54 Consecutive controls
10:10 Combined controls
11:16 Sub-controls
12:02 Battery level audio check
12:36 Outro

Хобби

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@yacinthelebot6074 2 месяца назад

Wow nice video thanks a lots! :)

@nacurity Месяц назад

This is amazing

@drakeschumacher9627 29 дней назад

gennnnnngar

@Daddyezee 26 дней назад

hey can you do me a big fav what is the default vol for the accent i changed it by mistake when trying to change the FOC settings then hit accent what sensitivity should it been on

@dennisrogers6786 10 дней назад

I could not get the 2 button press battery voice to sound

@tjcrooms Месяц назад

What Xeno 3 now has more stuff!? I didn’t even know it had lightning block or melt. The app looks cooler. I just ordered two new Vire sabers with Xeno 3 so I am excited

@thesaberfactory Месяц назад

Xeno3 is aging well. First few months were a bit chaotic with lots of bugs but now it’s getting stable and improved

@joeycarlson2019 День назад

How do you get your font list to show names in the app and not just numbers?

@laszlomagyar2588 17 дней назад

How to program a rain effect?

@namelessfaceinthecrowd2459 Месяц назад

Mine doesnt seem to want to detect the saber and color changing manually to red especially is near impossible

@reconpuffen 10 дней назад

Not sure if it's the same but I can't turn my blade yellow... when I do it just becomes white

@MasterKydis 20 дней назад

So I can use this to turn off color change from the saber. Great. Is there a way to copy the default config so I don't need to rebuild the whole thing from scratch?

@thesaberfactory 19 дней назад

Don't need to. Default remains untouched and can't be deleted. So you'll never lose it.

@MasterKydis 18 дней назад

@@thesaberfactory I meant I want copy the default config and turn off color change. But it looks like if I make a custom config I need to program everything

@thesaberfactory 18 дней назад

Oh ok. Not yet possible but that’s a good feature for a future update. Right now you need to redo it all manually

@waynegeer1576 2 месяца назад

If I hit custom function on app it says need firmware update. Select firmware update on app says requires soldering. Ignore warning and hit continue and says firmware succeed, but when I try custom function it still says needs firmware update. Any insight for possible solution? Should I try update from MicroSd?

@thesaberfactory 2 месяца назад

To update the firmware click on the firmware version number. The « soldering » warning is when you try to switch pixel/rgb at the bottom. Because the board can accomodate either baselit or pixel emitters. So … that’s weird. If your firmware says 1.3 you’re good. If you never upgraded maybe it had to do a gradual update, check your version

@purpl3t3ntacl3 2 месяца назад

is the Xeno3 app better than a SVn4 ? i think Xeno3 do more updates?

@thesaberfactory 2 месяца назад

Yes. There is definitely more development on Nexus’ side with Xeno3. So for now it’s got the upper hand

@terry9963 2 месяца назад

Sadly my lightsaber doesnt make any sound anymore if it is getting charged or powered on after the update.

@thesaberfactory 2 месяца назад

Factory reset or reinstall a backup. If you’re just missing those two sounds check that the corresponding soundfiles are on the sd card

@terry9963 2 месяца назад

@@thesaberfactory Alright thanks for the advice. Imma try it later.

@Daddyezee Месяц назад

question is the Xeon3 really the XeonPixel v3 or are you just saying Xeon3 in short of saying the full name XeonPixel V3

@thesaberfactory Месяц назад

Xenopixel named has changed. The 3rd version is named XENO 3.

@yacinthelebot6074 Месяц назад

Humm, j'ai essayé avec l'application et le sabre ne veut pas s'allumer, mais les autres fonction comme le son ou le % de batterie fonctionne. J'ai desinstaller l'application et réinstaller et j'ai le même problème, auriez vous une autre piste de solution ?

@thesaberfactory Месяц назад

La lame ne veut pas s’allumer ou bien la carte ne démarre pas ? (pas pareil). Dans le doute toujours regarder le mode DEFAULT pour comparer et voir ce qui manque et sélectionner le mode default pour revenir au comportement initial.

@yacinthelebot6074 Месяц назад

C'est vraiment le sabre qui ne veut pas s'allumer, là carte est allumer et fonctionne. Quand je remet le mode par defaut tout fonctionne. Peut-être que je serais mieux de vous envoyer un courriel avec plus de détails et support visuel pour que vous puissiez mieux voir le problème ? Merci pour votre réponse rapide! Votre service est incroyable, c'est certain que je recommande avec vous! ;)

@thesaberfactory Месяц назад

@@yacinthelebot6074 si ça remarche en mode défaut c'est très probablement qu'une consigne n'est pas correcte dans le mode que vous avez créé.

@andygee1138 2 месяца назад

Anyone else's firmware update timing out before complete?

@thesaberfactory 2 месяца назад

Make sure you have the least network interferences possible and if your saber has a low connectivity rating due to the hilt structure, remove the pommel or make the core visible and keep it next to your phone. It shouldn't disconnect. If you keep on having issues you'll have to do a manual update on the sd card.

@andygee1138 2 месяца назад

@@thesaberfactory Thanks! Got it working! What is the difference between "hold" and "hold button"?🤔

@thesaberfactory 2 месяца назад

@@andygee1138 Argh 😑 I should have explained. It's the same thing as "each time" and "1 time". HOLD BUTTON is timing the control. It won't produce any effect unless you release it at exactly the time you have set. And then you can have different functions using the HOLD BUTTON at different timings. HOLD is not timing, meaning after the defined time it will perform the action even if you're still holding the button. But then it also means it's not cumulative. No other function can be performed based on the same HOLD action.

@andygee1138 2 месяца назад

@@thesaberfactory Cool, thanks for that! This is my first saber and I really only want it for costuming as Luke in ROTJ so these settings are perfect!