CZ SP01 Cajun Gun Works Vs Cz SP01 Shadow 💯 The Ultimate Comparison 

Only video I’ve found that actually answered my question about upgraded CZ SP-01 vs stock Shadow, etc. Thanks for doing this!

This is good info for people in CA. The shadow isn't on the roster here so it's out of the question trying to get one unless you're rich 😂 just picked up the safety model SP01 and wanna replace the roll pin and probably the trigger asap

A lot of people dont know you can more or less convert a standard SP-01 safety to a Shadow by simply removing the firing pin block plunger and spring, then replace the FPB lifter arm in the sear cage with either a pre-B wide sear or CGW shim bushing. I modded my SP-01 to the point it is better than a Shadow 2, it's basically a Czechmate at this point. If you're interested in getting peak performance from your SP-01 and don't mind shelling out a bit of cash, here's a list of what I changed in mine; ~Replaced barrel with Cajun Gun Works fluted and threaded barrel and installed a compensator on it ~Installed CGW Accubushing and hand-fit it to the new barrel ~Replaced mainspring and guide rod with DPM Systems 3-stage recoil buffer and installed a CZC frame buffer pad ~Drifted the rear sight out and installed a dovetail optic mount for a red dot (I went with a Shield RMS 4-moa dot) ~Replaced stock grips with CZC short grips and flared magwell ~Converted to SAO by removing disconnector and installing CGW Standard Package kit with SAO flat face trigger and race hammer ~As mentioned, I deleted the firing pin block for a much shorter reset ~Mirror polished every single mating surface in the gun for a Teflon-smooth action ~Installed Cross Armory pic rail mounted thumb rest (I didn't want to drill and tap the gun) with custom molded thermoplastic grip surface for maximum muzzle flip control ~Shimmed the sear cage to the frame to prevent any rearward creep when pulling the trigger, it makes the pull much more crisp by eliminating any spring in the trigger With all these mods this gun goes from already great to utterly phenomenal, the trigger has only .050" thousandths of total travel, with .002" thou of creep from the wall and a 1.8 pound pull weight (I also slightly cut and polished the hammer hooks on the race hammer and also polished the adjustable sear in the CGW trigger kit), and with the other mods like the thumb rest, DPM buffer, frame buffer and the compensator, the muzzle flip is almost non-existent. Everything combined makes this the fastest, flattest, most accurate handgun I've ever shot, I'm getting sub-.15 second splits between shots and can land 6 shots on a target at 20 yards in one second, it's stupid fast.

I paid $900 for my sp01 safety in 2020 and I’m not even mad about it. It’s that good

I bought a P01 and SP01 Tactical (both dockers) and did M-Carbo triggers. Mandatory. My 75C has a safety and was a better trigger out of the box, and still better with the M-Carbo upgrades. Went to a gunsmith (Tooth and Nail, Laurie MO) for the installation- great job.

That is the best info I have found so far. Thanks!

I think I might take the SP-01 with the CGW upgrades because I want a “general purpose” type of CZ that can do every little thing at least more than adequately enough, rather than a pistol that’s perfect for competition but not good for battle or carry. My thinking might be flawed though… However, thank you for making a video that actually answers my question! Edit: I might actually just get the CZ-75 SP-01 Competition that just came out. Edit #2: I got the Shadow 2 instead :D Edit #3: I literally Cajunized my Shadow 2 after 1,200 rounds with it stock, now I don’t wanna shoot anything else now

I just got back my TriStar P120 from CGW - The P120 got all the upgrades inside of it specs now after CGW work DA was 7.3 now 6.8 - SA was 3.2 now 2.75 after i about 500 rounds thru it - put 5 shots inside a quarter from 8-10 yards - i have shot a factory shadow 2 and this TriStar P120 with CGW Package deal is a lot better than the shadow 2 - P120 cost $390 out the door -

I bought mine safety model in Sportsmans Warehouses for $750.

Read "A Rooftop Korean", instantly subscribed lol

Cz75 sp01 tactical is safer gun...but, sp01 shadow has better trigger! 🍻🍻🍻

I'm looking at getting a CZ SP 01 because I live in communist CA and the Shadow 1 or 2 isnt on the "approved handgun roster". Great informative video, great YT channel name, liked and subscribed 👍

YES!!!! Safety model CZ SP01 has a MUCH better trigger!

Fast forward 4 years and prices are up 45% - 50%. By the time I install the CGW pro package and upgrade the grips I’ll be close to the current Shadow 2 price.

Really like your videos bro. You should do a video on cz holsters. Recently got a compact 75, just don’t know about which holster is best for it.

I just paid $830 for a new SP-01 here in CA....and this was a good deal as other store were selling them for $900. SP-01 is on the CA roaster but the Shadow 2 is not. Shadow 2s are selling for 3k easily here in CA.

I just bought a safety model sp01 a couple weeks ago. Despite watching about a million videos on it before buying, and about a third of those saying about the same thing on the $550 price point, the best I could find for a brand new pistol was $613 shipped on gunbroker. After shooting it for the first time, I'm not the least upset about the higher than expected cost. The gun shoots amazing out of the box, but I'm still gonna throw a bunch of CGW parts at it anyway.

Awesome video! Did you install the pro package on the SP-01, or is it one of the competition packages CGW offers?

Here in California I got the SP-01 $789 not including taxes 😅 it is what it is, money is not an issue, California doesn’t offer the shadow other wise I would pay $1200 🤷🏽‍♂️ I love the CZ. I call it the 1911 killer

Yet to watch this.. please don't break my heart

Who makes those grips ?

Great video! Going to splurge and go for the Shadow line. Thanks

Excellent video. Content and presentation and audio 5 Star. Thanks!

Very, very informative video! Thank you!

Awesome Grips 😀 👌 Great review

I can’t find info on this anywhere, will the shadow slide fit on the SP01 standard?

The pin is the firing pin retainer, not the firing pin retainer pin, the firing pin safety is held in by the firing pin.

Perfect video, thanks

The SP-01 Tac is designed to be a duty gun that people convert for competition . A Shadow is designed as a competition gun . While based on the same "design frame work" it's like comparing a banana to a orange .

Thanks for the info, what hammer do you have in the SP01 Shadow ? Merry Christmas

What are your thoughts between SP 01 Shadow cajunized vs the CZ Tactical Sport?

You'll never find one for 550

very informative video.

link to the grips please

Looking to upgrade my P-01 Decocker with CGW pro package. Did you do any polishing on your Sp-01 tactical after pro install?

Just curious, what’s your take on The Tactical Sports Orange . Versus an rigged up Shadow 2 for example. Great channel! Cheers

just watched this vid and you did not talk about or show what cajun parts were done to the pistol!!

Thanks for the video. What sights are those en the SP01 ? Thanks

I’m torn between the SP01 safety versus decocker versions.

With the current price of the sp-01 being around $750 do you still think it’s worth the price ? Ive been wanting to pull the trigger on buying one recently

$550 🤣🤣🤣🤣 they’re like $750 now 😡

It’s frustrating they don’t offer the shadow without the safety

How would you feel about using one of these as a carry gun.. or maybe another model that you would recommend ?

For sp-01, don't pay more than $1000.

For a shtf outside waist band carry would you go for SP-01 safety model or P-01 decocker?

What about CGW sp01 vs shadow2? How’s the trigger compared?

Hey thanks for the day video and comparison. I plan on getting the SP-01 (safety model). I purchased the G-Fight gen 3 laser trainer earlier this year and really enjoy my dry fire training. You had mentioned about protecting the firing pin safety with a snap cap / O-ring. Wondering if you might have the answer to a compatibility question with the laser trainer cartridge. Will the firing pin safety mechanism in my firearm keep the firing pin from engaging with the laser trainer cartridge? Would I still need to use a snap cap in addition to the laser cartridge? Or does the laser cartridge also protect the firearm while dry firing? Thank you

OK, brother, i have searched both the video and the comments looking for the exact CGW package or gun parts that you placed on your competition-ready SP-01!! Can you PLEASE elaborate on this for us unlucky bastards that live in Cali and have NO opportunity to purchase a Shadow. Thanks in advance!!!👍

Why the hell do you pop up on my feed just now? I watched tons of CZ videos maybe 3 months ago. The trigger has less to do without the firing pin block and the decocker. I'm looking for a decocker so I can work on the DA trigger pull without needing two hands and I like that there is no safety besides the DA pull. At the same time if it's such a drag to service, the freaking roll pin is still there...what about breaking trigger return springs on the SP-01 vs. the SP-01 Shadow? I rather invest the money I'd save over a Shadow 2 in ammo and range time. I subbed your butt.

They don't make these grips anymore :( :( :( so cool

no choice here in a California. Got a safety model for $550! Waiting for the CGW Pro Package.

I would recommend a KJ Works model :)

where did you get your grip? thanks

What color is that shadow? I can't find it online or GunBroker. I like it

Isn’t the Shadow IDPA compliant where the Shadow 2 is not..? Love the video.! 👍🍻🇺🇸

Where would rate the CZ Custom SP-01 with the Hammer Trigger Guide Rod compared to these two?

Sending my CZ75BD to Cajun . I’ll let them handle the upgrade... thanks Yes I like my standard CZ75BD

Good Video but I’m completely distracted by how much I don’t dig those grips.

Nice video! Wish I can get these guns at the prices you’re suggesting but I’m in California ):

Are you familiar with the SP-01 Competition (Red/Blue)? If so how would you compare it to the Shadow 2 or the SP-01 base models? Mainly concerned about the trigger feel and I want the firing block safety I think

Boss, what grips are you using? Where can I purchase them from?

I just bought my first cz, the P01 for conceal carry. What do you suggest i change on the gun?

Where did you get the grips. I looked at Cajun and didn’t find them there

ever consider converting to SAO ?

Don't fear the decocker.

Where can you find an SP01 for 550$??

9 hi point lovers disliked ths video.....

550 was true 2 years ago but not today

You can only get these for $800 minimum now!

Great discussion. Would dig seeing your review of my beloved beretta 92 G variant. I also dig the CZ’s but the 92 just rapes steel plates all day long.

Grips get my Trytophobia going, eek!

Do these things fit in the same holsters?

Support your local gun store

Thanks for the info! I just got the safety model, what c.g mods do you suggest I buy 1st??

Mann. Ita hard to find a da, shadow 2 under 1200

I would like to know where you are buying your guns those prices don"t exist in my world

“Buy it for $550” *cries in California*

I guess those grips would be good for conceal carry weight but damn they look terrible

Whys he keep saying "if youre a gamer" ?

Paid $900 before tax and background check..

Don’t pay more than $550! 😂😂😂 laughing in year 2024! 😅

I really dont like the holes in the handle😂

Rooftop Korean??? Wtf? Does that make me a street level old white guy?

waste of time , .....sp-o1 tac or buy 1911