No video :(

Delboy's Garage, Busa Build, Day 4, 'Front Wheel Bearings' !

Подписаться 232 тыс.

Просмотров 54 тыс.

50% 1

The Real Work Begins... Front Wheel Bearings.!
Patreon Link:- / delboysgarage
Like many busy channels these days, we support what we do here with the generous help of Patrons who make this channel possible.. we commit 60 hours a week to what we do, and make every video a polished production worthy of our viewers time and support, We also strive to pass on information and knowledge that our viewers can use to save them selves money and keep their bikes safe on the road too..
If you would like to join the team and help support our online activities, if you have maybe been helped and guided by our videos, or maybe just entertained.. then you can do that from just one dollar a month by clicking the link above and becoming a Patron of the channel... Thank you all so much for your support..
Alternatively If you just want to say thanks for this video alone, you can drop a dollar in our "Tip Cup' by using Paypal to moonfleet10@yahoo.co.uk The money will go to make more videos and keep this channel in your hands and not the advertisers.
Wemoto.Com :- www.wemoto.com/
@wemoto :- / wemoto
Blind Bearing Puller Set :-
www.wemoto.com/parts/picture/...
Spanner Monkey Tool Site :-
www.spanner-monkey.co.uk
Sealey Blind Bearing Puller Set :-
• Sealey 12 Piece Blind ...
www.wemoto.com/
Buy 'Delboy's Garage' Merchandise:-
stores.clothes2order.com/delbo...
Wiha Tools available from RECON Electrical :-
www.reconelectrical.co.uk/
Follow us on Facebook :-
/ delboysgarage
Check us out on Twitter :-
/ delboysgarage
..and if you haven't already, then please subscribe :-
/ moonfleet41
Become a Patron and join the team :-
www.patreon.com/user?u=2841534

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 236

@jsin22366322 5 лет назад

The only wheel bearing press you’ll ever need! You sir are a genius.

@bccapone837 2 года назад

Great stuff thanks 👌🏼👍🏼

@speon 3 года назад

New rider here, I recently replaced the front wheel bearings on my 1st bike thanks to the help of this video. I used a homemade press like you showed with washers on a threaded rod, worked like a charm. I've since gone down a rabbit hole of watching your videos, solid channel content keep up the awesome work!

@Moonfleet41 3 года назад

Thank you my friend, that's very kind, am glad you've found the videos useful and appreciate your kind feedback!

@tattoos1988 3 года назад

A man after my own heart I cannot stand dirty tools I always clean my tools after use I have done this for 20yrs always a pleasure to use them again when clean plus it stops all the skin problems that come with old grease and stuff plus your tools last longer I’m not criticising anyone who don’t clean there tools each to their own lol stay safe everyone god bless

@AMGBRABUS100 Год назад

TANKS BRO YOU ARE A MASTER .

@kwh4754 3 года назад

practical resourceful mechanic. proper.

@zdenekbezdek2071 11 месяцев назад

thanks for the tip master 👍👍

@sergocheb6609 2 года назад

Beautiful job.

@motomoran8173 5 лет назад

Awesome tutorial and very informative. Great job and great idea. Thank you.

@roamingdev4990 5 лет назад

Love it Del. Back to the simple skills, plenty of nuggets of information, the reason I watch you!👍

@Moonfleet41 5 лет назад

Thank you Sir, that's very kind, twas the foundation upon which we launched the channel... simple, basic tasks we can all do ourselves!

@petergrewal7083 4 года назад

I watched you last video on removing the wheel bearing using metal rod to knock them out, and I changed bearings on my triumph using that method , and now I was stuck on 1982 Honda CBX550 as these are bit more difficult to get out, saw your new gadget sealey AK716 how easy it was to remove the bearing, so I paused the video ordered a set from Amazon, so tomorrow i will be able to do the job. It's all about knowing what tools to use, without watching your video I would have never know , Big thank you and keep up the good work.

@Moonfleet41 4 года назад

Hi Peter, am glad that the second video gave you a solution, it's pretty easy to knock bearings out gently, if you can get to the back of them, but it's always more gratifying to pull them out with a proper tool if you can afford it... good luck with it, hope it goes well for you!

@ZBwing Год назад

PERFECT! just the info i needed ty

@Moonfleet41 Год назад

No problem!!

@JoeHatesItHere 5 лет назад

Watching your videos gives me so much happiness, knowledge, and confidence to work on my own bike. But then I put the bike on the paddock stand it blows up immediately LOL. Thank you for the videos!

@Moonfleet41 5 лет назад

have faith and keep going mate, skills become easier with practice, none of it's rocket science!

@MrAndyCarlos 5 лет назад

The best way of installing wheel bearings. Congrats for this simple and efficient tool.

@robertlumsden942 5 лет назад

gosh watching you do wheel bearings brought back some good memories with me dad. we restored a 1967 step side pickup truck. was so much fun. really enjoying watching man.

@istvanvigh2367 5 лет назад

Professional master work with lots of love and tools. I enjoy watching all the videos! Look forward to the next!

@bubbles1863 5 лет назад

Brilliant tips del love how u make it simple for us that are learning thank you so much.

@gzabouras 5 лет назад

Del your idea of the press best describes of what creative thinking and effective tool utilization should be!really inspiring!thank you for that!

@Moonfleet41 5 лет назад

Thank you Sir, just use what you have aye?!

@JDnBeastlet 5 лет назад

Another winner, Del. Great instructional video. Cheers D&P!

@QBTO 5 лет назад

Another excellent video mate, clearly and simply explained for us DIY mechanics. 👍

@davidwilson8010 4 года назад

Thanks for the tip with the bearing tool..keep up your work man..blessings always

@razvanciurez 5 лет назад

Sir, you are an inspiration. Keep it up!

@jayankj20 2 года назад

Good idea

@eaglestrikes1 5 лет назад

Brilliant video Del, thank you. Some great tips there

@grahamleigh7323 5 лет назад

Quality presentation Del. Methodical work methods limit errors ..... great stuff as usual 👏

@BIG-K 5 лет назад

I think those were the best demos of bearing tools in action that I've seen to date. Nice 'ghetto' press too. Very enjoyable, Del 👍

@MrAlmar07 5 лет назад

Was thinking the same Keith. Almost worth investing in a set after that. 😉👍

@Moonfleet41 5 лет назад

Thank Keith, simple stuff aye, and a job we can all do ourselves!

@thesuperfunkomatic 4 года назад

Brilliant! That's the next order of business on my bike.

@jimfrozen521 5 лет назад

Great job ...been using all thread for years ..headsets too love the channel average man / with skill no big money tools keep up the great work and never forget the misses ....God Bless

@darnyboy69 5 лет назад

The tool you have made to insert the bearing is brilliant! What a great idea mate 👌

@ThumperXT 5 лет назад

Brilliant and simple (for you of course)

@MattSaysSmile 5 лет назад

Ummm bought the Kewtech multimeter the other day and now ya got me looking at bearing pullers....gets expensive watching your videos Del ha ha.....couple of things you never hear a bloke say, “I’ve got enough tools and I don’t need another bike” cheers good video, ride safe D&P 👍

@Moonfleet41 5 лет назад

Ha ha, so right Matt, you cam never have enough tools, motorcycles or crash helmets....! and you'll never find a tool in your garage that you "regret" buying..!!

@humbertoramirez7799 2 года назад

thank you for the video

@sarchelsami5431 5 лет назад

Grate!,,, thank you for your nice explanation

@berndberberich1479 5 лет назад

Seine Videos sind die reine Inspiration für mich❗️❗️Danke dafür

@Moonfleet41 5 лет назад

Vielen Dank, Sir!

@Dustii91 4 года назад

Watching the new wheel bearing go in, all I could think is "smart ass". Never see this done in the past but I love the creativity for a diy tool!

@Moonfleet41 4 года назад

Thanks buddy, simple enough aye.

@ronalmon3319 5 лет назад

Very nice brother 👍

@paulbuckberry7683 5 лет назад

Like the puller set Dell, might treat myself to one of them!

@Moonfleet41 5 лет назад

Link in the description under the video Paul, once you have one, you'll wonder what you did without it !

@terryife8823 5 лет назад

Love your home made press Del, nice one !!

@Moonfleet41 5 лет назад

Thanks buddy... Everyone should have a little Ghetto in their life aye..!

@GiaThinh93 4 года назад

More precise than hydraulic press

@rsbharley4766 5 лет назад

Another quality job Del. threaded rod has saved me lots of times. Penny and you have a good week. Cheers

@Moonfleet41 5 лет назад

Sure thing buddy, I've got half a dozen lengths of the stuff in different sizes, it has so many uses aye! Thanks for your support, D&Px

@naw33luck 4 года назад

Hopefully i can replicating your project, so i can share with my people with my 150cc bike 😄 love your channel keep doing what ya doing 😍

@arnybarmy 5 лет назад

Like the spannery vids Del - I'm learning slowly!

@andydawson2070 5 лет назад

It's like watching the bandit videos but more updated. Proper useful information. Thanks Dell.

@Moonfleet41 5 лет назад

Cheers Andy, just routine stuff i guess, and it will inevitably come round again as time goes on... glad you enjoyed it buddy..

@MrOutOfTheVoid 5 лет назад

Brilliant as always. I made a similar bearing press to remove some swing arm bearings. In my case, just used two of the right sized sockets.

@Moonfleet41 5 лет назад

Perfect solution mate, the great thing with sockets, they come in a range of sizes lol

@HalfdeadRider 5 лет назад

I've seen you use your homemade press quite a few times now, when it comes to me needing to do bearings, I'm definitely going to make one.

@gerrypowell2748 5 лет назад

Great tip for the bearings❤️

@DVDsNFC 5 лет назад

another great vid thanks for making them

@StevieGstar 5 лет назад

Great job Del .. it's going two be a mega build...

@SathyaShreeya 5 лет назад

Hello I am from India and I love to watch all of your videos and your works are simply awesome, I am very eager to meet you and to visit your garage when I come to the US

@MrOutOfTheVoid 5 лет назад

He's in the UK...

@HD2O13XL12OOC 5 лет назад

😆

@christopherdevries1969 5 лет назад

I guess two wheel bearings fell from the tree... 😊. Good vid 👍 👍 👍.

@myz06rocks 4 года назад

Totally SAVED to my next to do jobs list. I even have my wheel bearings already sitting in my tool box

@Moonfleet41 4 года назад

Thanks Tony, glad this worked for you, if you have any problems, then of course, drop us a line us problem!

@wnicklas 3 года назад

Damn good toy you got there!!! And the tool, thank you for a very good idea! I have a press for sale!

@tttrevin 5 лет назад

Another great video mate. Cant wait for the next. You give me courage to work on my bike.

@Moonfleet41 5 лет назад

Thanks buddy, thats good to hear, and good luck with your own projects..

@supermech6429 5 лет назад

Perfect.l love your tools

@bradleythompson7722 5 лет назад

Hello, again my friend, Excellent. I do like that bearing puller it is a must have soon for my toolbox. Improvise and overcome on your bearing press, way to go! I am very impressed. Always a pleasure take care.

@Moonfleet41 5 лет назад

Thank you Bradley, like Chandler Dickinson says "need a tool, make a tool", glad you enjoyed mate!

@paulharast1958 5 лет назад

Awesome, Penny & You Del Ride Safely.

@Moonfleet41 5 лет назад

Thanks Paul, thank you brother, just a good ol' fashioned basic maintenance video!

@66dweazel66 5 лет назад

del... thank u for making me buy yet another tool ... keep up the great work 👌

@Moonfleet41 5 лет назад

Hopefully that's the bearing puller? You will love it mate, it can remove just about every bearing on a motorcycle, and you'll use it over and over again!

@johnnypg 4 года назад

You are the best.

@shanelonergan1792 4 года назад

Why would you want a hydraulic press when you have that home made beauty well done Derek nicely done

@laikatravels 5 лет назад

All interesting stuff, cheers Del

@PatrizioBassoRicci 5 лет назад

Thankyou for the link of the shop. It's cheap even buiyng from Italy.

@patsonabike 5 лет назад

Thank you very much!! That is my job for this weekend. Got the bearing puller set and bearings hopefully arriving before then. I just have to forage for the bits to assemble that press dooda thingiemabobs. :) I was also going to change fork oil but I'm doing it the lazy way, unscrewing the top and dumping it out with the all the dampening rod assembly still intact. I hope I can get away with it because I don't have a sharpened broom handle to hold the cartridge assembly in place and I have no help, as usual.... Anyway, really helpful video, thanks again and best wishes to you and Penny. :)

@Moonfleet41 5 лет назад

Good to hear from you Patricia, best of luck with it, enjoy the process, it's really rewarding when you get it all done! Have a great weekend tinkering! D&Px

@busaboyzmccsa9739 5 лет назад

love this method of doing the bearings, much better way, thanks Del. awesome as always

@Moonfleet41 5 лет назад

Thank you brother, good to hear from ya, hope the sun's shining there for you today, ride safe, god bless, D&Px

@busaboyzmccsa9739 5 лет назад

@@Moonfleet41 not now is late but its winter here, LOL, Blessings brother. will sent later same great pics of the progress

@busaboyzmccsa9739 5 лет назад

wife say hi, we watch all your vid, brilliant workmanship , Jurie& TInkie

@david555montez9 5 лет назад

Exellent tool Exellent class Exellent always my friend I was busy but I'm still here !! Regards and always supporting 🤓👊

@Moonfleet41 5 лет назад

Have a great Sunday David, always good to hear from you!

@david555montez9 5 лет назад

@@Moonfleet41 equally my friend equally !!! 🤓👍

@numanyildiz7100 5 лет назад

Perfect!

@DrRockter5150 5 лет назад

At 9:26 did I hear some French? ohh baby! Hope you and Penny have a rockin' day!

@nobody4925 5 лет назад

un soupçon :)

@Moonfleet41 5 лет назад

You may have done brother, just a little! Hope you're good buddy, say Hi to the guys! D&Px

@tqm6943 3 года назад

I need to start doing this stuff. I'm losing a fortune in labour, it's not that i can't do it, i most likely can, it's confidence.

@MrAlmar07 5 лет назад

Was just saying to Johnny, 'I'm waiting on Del's new video' & bang there it was. Nice one as per & an updated simple skills video for the new subscribers. Awrabest to you both bro. Catch up soon. Al.

@Moonfleet41 5 лет назад

Cheers brother, appreciate that, simple skills is what we founded the channel on all those years ago... so great to still be doing them now and again!

@bluehazeboy 5 лет назад

Top job

@fader2701 5 лет назад

thanks for the video

@TechnMoto 5 лет назад

Another great one👍👍 I enjoyed watching

@Moonfleet41 5 лет назад

Thank you brother, watching every episode of your scary green paint job... damn, you're gonna see that bike from the moon!

@TechnMoto 5 лет назад

Moonfleet41 lol that’s the idea 😂 no I just seen the color and thought why not I like the color and on a Harley it’s different- I like being different. You’d be surprised even with this color people still don’t see ya but it definitely helps to be seen much better. Of course I’m no where to your level but the student is learning 😂 take care

@han_mulders 5 лет назад

Good stuff Del, and nice tools, especially the extractor. Welded a nut to a bearing once to pull it out and that worked pretty well too. Enjoying it to bits, keep it up!

@geoffozevans4500 5 лет назад

Really easy install to follow, good on you Del, all the best both x 👍👍😎

@Moonfleet41 5 лет назад

Thanks Geoff, always good to hear from you!

@geoffozevans4500 5 лет назад

@@Moonfleet41 did you get my email & photo of G Evans Spraying Ltd lol

@Moonfleet41 5 лет назад

@@geoffozevans4500 Ah yes, we did, tbh we're a bit behind with emails mate, you were on our list of "to do's"... looks ok, hope it's good now it's dried!

@geoffozevans4500 5 лет назад

@@Moonfleet41 👍👍👍😎

@bikerdad1479 5 лет назад

Another good demo vid goes to show you don't need expensive tools to do a job right

@glaucolorenzetti1343 5 лет назад

Del I love your work and you have been a great inspiration to me for years. I am a Suzuki owner as well. Please allow me to say that if you use a socket on the edge of the rim to push in the second bearing the pressure might push back the first one through the spacer. The second tool you showed works much better in keeping the first bearing seated in its place, I use one like that plus old bearings (that I slotted so they don't get stuck) to press on both the races at the same time.

@Moonfleet41 5 лет назад

That would only be a problem if you wound it down to hard, as you saw in the video, you should be able to turn the spanner with one finger almost as you wind it in, the minute it goes tight, stop dead... and you can tell that both bearings are at the same correct depth cos the rubber seals push in dead flush, and also the spacer tube can be moved with your finger, also if you pull both bearings in that the same time with matching discs, then you can still squeeze them too tight, and if one bearing binds more than the other, you can pull them in unevenly, the socket works fine, just go steady nipping it in... thanks for your input Glauco, always much appreciated, ride safe, Del

@glaucolorenzetti1343 5 лет назад

@@Moonfleet41 thanks a lot for your answer Del. Just a clarification, when I said both races I intended both inner and outer race of the first bearing only, so that the first bearing doesn't move and no excessive pressure can be applied to the inner race. Looking forward to your next videos.

@paulelverstone8677 5 лет назад

The idea of freezing machined metal and then smacking them into a hole with a hammer has never sat easily with me. *goeslookingforthreadedbar*... :o)

@Moonfleet41 5 лет назад

Too right my friend, not just the concept of smacking them in, but dropping freezing cold metal in to a red hot hole, that's gonna case harden it in a moment making it brittle surely, like quenching hot metal in water... room temperature, then just press them in gently, works every time!

@robplazzman6049 5 лет назад

Moonfleet41 I made a threaded bar tool to fit steering bearings in my MTB. Room temp frame and cold bearing deffo makes it easier.

@benlow5564 5 лет назад

Your the man delboy

@bobgwinn5091 5 лет назад

awesome

@gilesbristow123 5 лет назад

I still have the threaded bar and washers lying on the back of the bench, even though I have a press now

@jamesweber4938 5 лет назад

A video showing the correct way to install oil/grease seals and the reasoning how the lip/spring on the seal keeps the grease in and the dust out would be helpful to some.Most manuals don't show the fine details of which way the seal should be installed.

@Moonfleet41 5 лет назад

As an absolute rule all bearing seals (if you examine them) have a 'closed' side and an 'open' side, it may visually vary in looks, but no matter what, one side will always look slightly open and the other sealed, they always fit with the open side facing inwards to keep the grease in and then the outside sealed face to keep the dust out... it's a general rule for all oil seals buddy

@jamesweber4938 5 лет назад

You and I know both know which way an oil seal is fitted but how many people watching the video know the "general rule" ?

@Moonfleet41 5 лет назад

@@jamesweber4938 Yeah, Point taken, i always have to strike a balance between sharing useful information, and not patronising,,..! not an easy balance aye.!

@jamesweber4938 5 лет назад

Definitely not an easy balance. I will be removing the back wheel on my 1300 Yamaha Midnight Star today to replace the needle roller bearing in the belt drive pulley that is prone to failure. When the bearing fails it "welds" itself to the axle. Then you have to cut the axle to get it out. Very poor design.

@Volvi373 5 лет назад

Thought you might have checked the old bearings to see what condition they were in and if knackered, but guess you decided to change all bearings no matter their condition.Guess that way you know you never have to re-visit them. But then one always does with any tyre change. Great useful vid. Cheers.

@Moonfleet41 5 лет назад

Exactly that Volvi, whether these small consumables are actually worn out or not, it doesn't hurt to pop a new set in so you know how old ALL of the consumables are on the bike going forward... better the devil you know aye.! now i know ill get years and years of service from all of it without worry.

@loddude5706 5 лет назад

Hi Del, nice job. Maybe a quick word about never, ever re-using a bearing that's been pulled by it's centre, even if it seems in perfect nick afterwards. Always break the outer race BEFORE you bin it - then flick the balls at one another : )

@Moonfleet41 5 лет назад

Wise words well said my friend, they're a one time fit for sure!

@cr-ew8od 5 лет назад

Pauses video orders bearing puller. Right where were we.

@trapperjohn4303 5 лет назад

Excellent tutorial well explained and demonstrated. What were the bearings like that you removed? My xjr has 33,000m on the clock and same wheel bearings. My own pre ride checks or recent MOT indicated no problems however will it be worth changing them anyway due to mileage? Thanks for passing on the knowledge.

@terryblack2219 5 лет назад

Nice tidy way of putting those bearings back I will borrow that tip next time I have to do we’ll bearings thank you

@garya3056 5 лет назад

Nice primer on bearing replacement, Del. Hope you cleaned up Penny’s toothbrush before she got home! 🏍👍🏍

@Moonfleet41 5 лет назад

Thanks buddy, am hoping she doesn't notice lol !

@garya3056 5 лет назад

Moonfleet41 hehe...!

@baccas66 5 лет назад

I find a hot air gun and infrared thermometer (£15 amazon) helps when removing and installing bearings. Usually 80C is enough. Loving the look already minus the fairings and screen. Fair play to you fella!

@alejandroarmando8488 2 года назад

you all probably dont care at all but does someone know of a way to get back into an Instagram account?? I was stupid lost the password. I would appreciate any tricks you can give me.

@keegangrant5769 2 года назад

@Alejandro Armando instablaster ;)

@alejandroarmando8488 2 года назад

@Keegan Grant i really appreciate your reply. I got to the site through google and Im in the hacking process now. Looks like it's gonna take a while so I will reply here later with my results.

@alejandroarmando8488 2 года назад

@Keegan Grant It worked and I actually got access to my account again. Im so happy! Thanks so much you really help me out !

@keegangrant5769 2 года назад

@Alejandro Armando No problem :)

@merquisonmototardivo5806 5 лет назад

Haya vai ficar top

@H31MU7 4 года назад

I really want a bearing puller now...

@DB71170 5 лет назад

Everyday day is a skool day with Del boy the instructor 👍.

@SquidRider 5 лет назад

3:16 so satisfying.

@Moonfleet41 5 лет назад

And 8:31 !

@anidiotinaracingcar4874 5 лет назад

10:40: That reminds me I need a dust seal for a Beringer brake caliper (I'd like to avoid buying the whole kit for $150+). Any advice on dust seal shopping?

@simonrawle7885 5 лет назад

think a nice set of nissin 4 potters will look for better on that

@ethanmacheras5967 4 года назад

Wheel bearings on motorcycles is a lot easier than cars!

@davidwilson8010 4 года назад

The easy way to cut the roater is to press it for the other side and it will get back online..

@hsmith3844 5 лет назад

Definitely invest in the right tool instead of the emergency room (don't ask).

@Supernova12034 4 года назад

Hi del, im putting in new wheel bearings, the bearings should be flush(tight) against the spacer yes? Holding it in place? The spacer shouldnt be moving around or wiggling around right? It should be held in place by the bearings? (05 fz6) I did it this way, but noticed that if the bearings are pressing against the spacer, the bearings arent actually rotating freely and take a fair bit of effort to get them to move by my fingers, did I do it correctly??? Is this normal?

@Moonfleet41 4 года назад

Snug against the spacer tube, but not tight so it's jammed, and the race should rotate by hand though the action may be firm not slack..

@springy-2112 5 лет назад

YEP! 👍🏻☮❤

@distancejunkiemonkey4491 11 месяцев назад

I have a 2008 GSF1250 SA. The manual says to install the right wheel bearing then the spacer followed by the left bearing, leaving "clearance" between the spacer and the left bearing. The spacer is longer than the distance between the bearing seats. I obviously installed them wrong because the spacer was wedged in between. So for my second go, how much "clearance" is appropriate? and I'm assuming the proper way is to keep checking the clearance as the bearing gets close? Or is there a depth measurement?

@Moonfleet41 11 месяцев назад

"Clearance" just means to NOT wedge the spacer tube solid.. press the second bearing in gently, stop once you feel it seat, and then the tube should be able to shift under light pressure so it can line up with the axle... to my knowledge there is not measurement !

@distancejunkiemonkey4491 11 месяцев назад

@@Moonfleet41 thank you!!!