Delboy's Garage, Fighter Build

Подписаться 232 тыс.

Просмотров 129 тыс.

50% 1

Tyres fitted, Wheel bearings in.. Ready to balance..!
Patron Support:- / delboysgarage
Here at DBG we support and fund what we do courtesy of kind and loyal Patrons who help us with the bills and costs of running a progressive channel to help our fellow riders around the world, we put over 60 hours a week into this, much of it behind the scenes, and if you've saved money, been helped, or just entertained then you can lend a hand in the running of things too if you feel so inclined. From just $1 a month, you can become a Patron and help us make a difference. click the link above.
Or If you just want to say thanks for this video alone, you can drop a dollar in our "Tip Cup' by using Paypal to moonfleet10@yahoo.co.uk The money will go to make more videos and keep this channel in your hands and not the advertisers.
Buy 'Delboy's Garage' Merchandise:-
stores.clothes2order.com/delbo...
Wiha Tools available from RECON Electrical :-
www.reconelectrical.co.uk/
Follow us on Facebook :-
/ delboysgarage
Check us out on Twitter :-
/ delboysgarage
..and if you haven't already, then please subscribe :-
/ moonfleet41
Become a Patron and join the team :-
www.patreon.com/user?u=2841534
The Sicksting Outlaws:-
/ thesickstringoutlaws
Links to Wemoto parts and tools:-
www.wemoto.com/bikes/kawasaki/...
www.wemoto.com/bikes/kawasaki/...
Bearing Puller:-
www.wemoto.com/parts/picture/s...

Опубликовано:

12 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 271

@antaklugom7389

I expect to see the Removal using impoverish Tools....Not professional Tools as many dont own it.

@joek81981 Год назад

I feel like I'm not supposed to be an American. This feels like evidence of that.

@rodmcleod3072 5 лет назад

Old brake discs make great clocks.......fill the centre hole with a piece of checker aluminium and drill then pop in a clock motor....Bob's ya uncle

@nickhellen6303 2 года назад

Long delayed reply; but I bought one of those Sealey Blind Bearing puller kit after watching how much better it works compared to hammer violence.

@apf14378 6 лет назад

Enjoyed the video as always, well done, very clean job!. Just a question. Is it a good idea to grease the bearing holder? I mean, those bearings are not likely to grip but some times, in different situations, when the bearing grips, if it slips from their place, wich is usually aluminum made, the bearing destroys the holder, in this case, the wheel. I would never put grease in an outer or inner race of the bearing, but...I've never changed a wheel bearing so...that was the question!

@123fasful

Hi sir I replaced my wheel bearing today. After pressing the bearing in it just cannot spin freely as the spacer seems to be stuck with the inner race. Will you have any idea which part I did wrong? Any advice is greatly appreciated

@martinw2893 6 лет назад

The time and effort you have put into this build is incredible, really struggled to get into the build at the beginning but you have completely hooked me with it. .and the effort and time you have given it whilst still cracking on with a full time job is seriously great. .Thanks for doing what you do del.

@csiautodetail 5 лет назад

That tool is sweet but way to expensive!

@TheSavageGarage 6 лет назад

I didnt know you owned a scooby doo del? Nice! P.s invest in some ratchet spanners mate for jobs like pulling those bearings! way easier than lifting the spanner up each time :D

@alvingallegos6367 2 года назад

Thanks mate

@Aemobileonline 6 лет назад

I love that bridge puller Del! I also think I'm going to have to make a bearing press based on your idea. It's so simple, but seems like it works really well. Sure beats driving bearings like I've had to do in the past. -Austin

@matmiller5256 5 лет назад

Top video, Thanks for takeing the time too share. New bearings/ Tyres =Nice feeling.

@50pence59

This really good.

@davidfrank2824 4 года назад

I started to yell at my phone for you to grab a rag or put your hand over the snap ring. I know from my own experience with them they can be quite dangerous. when you showed those snap ring pliers that you have right away I did a Google search to find them. I'm also going to try to file in on I set of snap ring pliers that I already own and see if I can make them work like yours.

@RichieWilliams 6 лет назад

Happy Valentines day present to myself, just ordered a blind bearing extractor set :)

@paulharast1958 6 лет назад

I tried for during the bearing puller set before and I could not do it so I bought myself a 9 Piece set and I have to bite a bridge puller itself. Enjoy watching your videos. Penny and you have a wonderful day.

@rsbharley4766 6 лет назад

Nice job Del, it's all coming together. jobs are so much easier when you have the right tools. Penny and you have a good week.

@colinwood1802 6 лет назад

FANTASTIC ,,,,Cheers Del and Penny

@marshallcollins8634 4 года назад

Thanks for confirm that the allthread idea will work(sort of). My idea is to pull both bearings in at the same time,and it looks like you did one at a time. I have used the allthread trick for many different things over the years but I'm concerned about the aluminum wheels from a 1977 kz650. Thanks for the video

@Ratqueenbikes 6 лет назад

Long day for both of you by the sounds of it Rat Cuz but great job as always from you both. Awesome piece of kit the bridge puller. Excellent video and looking forward to the next one hun x