Deus II how deep? 

Great info, thanks for your help.

Thank you

Thanks Fred 🤝

Thanks again!

Thanks Peter 👍👍

Banada biri bu program hangisi yazar mı versiyon 2.0

Thanks Greg 🤝

Thanks for your support Jo Jo

​@@The-skillschool lütfen program bilgisini alablirmiyim

Great job thanks John

Thanks Robert, the more you dig, the better the chances.

Thanks for sharing James, it's good to know that you are getting results.

Thank you

Hmmmm

You are welcome

Nice one Bobby

That's good to hear, thanks for your feedback.

Thanks for your thoughts, great info sir 👍🤝

Sure is Paul, even at Freq max 40. Thanks for watching.

Thank you 👍🤝

I will try that thanks

In a few weeks

Hmmmm can't say 😁

Thank you

Thanks buddy 🤝

Thanks Albert

Great feedback, thanks David, congratulations on the Minim, they are tough critters to find 👍

Thanks Bobby 🤝

Thanks Joseph, all explained in the Tekkna 2 video. Version 1.1 or 2.0

@@The-skillschool Ok great thanks

Glad you like it, Rem is doing OK. He had his own turnips removed this week.

@@The-skillschool 😢

That's good to hear 👍

Simple tweaks, they can be done in seconds. Glad it is working for you. 👍

@@The-skillschool Hi Gary...the suspense regarding the beach tweaks is killing me LOL...can't wait a few weeks for the videos - is there any chance you can post those simple tweaks??? Please...pretty please....Happy Easter.

Sure, on lower reactivity settings the machine sounded off on every sweep, with long lazy sounds. Raising the reactivity eliminated these false signals.

@@The-skillschool ok thanks

Well done sir, thanks for the feedback.

Hi DDS firstly the hoodie is a Hayling detect one. Regarding PWM, it's worth a try.

Watch my earlier video Steve

Thanks, did you watch last week's video. All was explained in that one.

@@The-skillschool I believe I did not sure how do I rewatch it

Shoulder injuries are a nightmare John. Same problem but no surgery. Get well soon.🤝

@@The-skillschoolThank you Gary I hope it is as good as the last one. I miss detecting.

Sure can Wayne, personally I like to hear it.

From Hayling Detect

thanks gary

I don't ground balance Richard. especially here in the UK. The only time I would do this is on mineralised ground.

@@The-skillschool I always wondered - when I ground balance here in the South West, the figure usually drops from 87 to 73 - and that's on low mineralisation. Maybe I'm making a mistake, and this is possibly a reason why my depth (until Tekkna) has been lacking.

I wouldn't say you will lose depth, you will just make the machine unstable with an incorrect GB. Watch the mineralisation bar when you sweep.

@@richardtarr2745 Same thing for me.. I asked the question to xp here is their answer.. Do not confuse the mineralization bar and the mineralization index. The mineralization index corresponds to the nature of the soil, so it is a value that tells you the "signature" of the soil. The mineralization bar on its side shows you the strength of this signature: the more it will rise and fill, the more mineralized your soil will be and therefore the more difficult you will find it to detect in depth because it creates a kind of mask that is difficult to cross (some talk about more or less dense fog). Keeping this in mind, you will therefore understand that your soil is a soil whose signature is present (it is not non-mineralized sand) but that its mineralization force is very low! Lucky that you are :) Conclusion: Make your GRAB at each exit as you have usually done visibly and enjoy your floor conducive to detection! It is advisable to stay at the default ground value on soils with little or no mineralized with our single-frequency devices because otherwise, you will generate the inconveniences you have mentioned (disruptions, ground sounds, audible disk shocks etc...). Conversely, on the multi-frequency programs of the Déus Il, the STAB SOL function makes it possible to strongly mitigate these famous disadvantages, so it is advisable to always do a GRAB in order to improve certain internal parameters of the device. Here you are, you know Everything (Désolé pour la traduction approximative 😐)

Thanks for your thoughts.

Yes I have a video on the master set up.

Not on the Deus 2

Check his video list - he has one...

Thanks

100% if you are on a quiet piece of land, lower the reactivity. Try 2.5 to start with.

@@The-skillschool Thank you master🫡

Thank you

9" coil

​@@The-skillschool Sweet. I use the same. TY for a reply.

All factory default

Different soils I guess

Depends what you are looking for.

@@The-skillschool what is XP Xtreme Hunter good at and what is Deus 2 good at then?

I have videos on this subject

I hear you Russ 😀

It depends on the target size and ground conditions. #xpxtrem