MAMBA F405 F4 Mini all in one AIO 20A ESC DSHOT power tower flight stack - best value ever

Подписаться 15 тыс.

Просмотров 9 тыс.

50% 1

This Mamba 20x20 mm stack with an F405 F4 mini betaflight controller and 20 amp all in one esc board is ideal for light and small builds.
It makes a very neat package thats only 20mm high, so it'll easily fit into a 2 or 3 inch build. Great for cine whoop builds.
I has a great list of features and is super cheap - probably the best power for your buck.
MAMBA F405 Mini Flight Controller Stack
bit.ly/2NW4GWs
Frsky XM+ Micro D16 SBUS
bit.ly/2CdMId9
HGLRC GTX NANO VTX
bit.ly/2HaGiQ2
Specifications:
Mamba F405 Mini FC
Item name: F405 mini Betaflight Flight Controller
Input: 3~4S LIPO (11.1V~14.8V)
BEC: 5V 1A
MCU: STM32F405
Gyro: MPU6000
FLASH: 16M
OSD: AT7456
Mounting: 20mm/M2
Weight: 3.5g
Mamba F25 ESC
Item name: Mamba F25HV ESC
Input: 3~4S LIPO (11.1V~14.8V)
Continue current: 20A×4
Burst current: 25A (5S)
CURR: 135A
BEC: NO
Size: 30×30×5mm
Mounting: 20mm/M2
Weight: 8g

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@1hit1der41 5 лет назад

thanks for this video it helped alot as I am getting the same board

@wezcrutchfield 5 лет назад

Looks pretty neat

@WhirlyBloke 5 лет назад

It's awesome.

@musidude 5 лет назад

Great unboxing, very helpful!

@FPVMgunit13 5 лет назад

The VCC pad can be used for 7-17 volts on the VTX correct?.... it's better to use the extra power on the VTX then 5v?

@sandersassen 4 года назад

Stumbled onto your video looking for the proper scaling of the current sensor on this particular Mamba F25 MK2 4-in-1 ESC, Diatone suggests 400 as a scale, but that doesn't seem to work and 4000 would be more appropriate, did you also notice this?

@WhirlyBloke 4 года назад

I haven't scaled the current sensor on this board. But I always believe what I see with my own eyes rather than any specs. Always setup voltage and current sensing yourself to be confident its correct. Thanks for watching.

@bryontrott 5 лет назад

Do you know how to flash the escs with this flight stack or connect with BlHeli? I take these are BlHeli_s?

@Xplicit_fpv 4 года назад

Is there a 3.3 volt PAD on this board for Spektrum receivers.. ah u showed the paperwork that came with it and it showed it! Ty

@WhirlyBloke 4 года назад

It doesn't look like it. Check out the Mamba manual cdn.shopify.com/s/files/1/0027/2708/4144/files/M_F405_MINI_MK2.png?1497

@giantclamfpv4970 5 лет назад

Hi, thanks for the review, did you update betaflight to the latest version? if so what board did you choose in the flasher?

@giantclamfpv4970 5 лет назад

Thanks but I found it. go to cli in BF, type in version, its" furyf4osd".

@WhirlyBloke 5 лет назад

@@giantclamfpv4970 Yep. You beat me to it ;o)

@tinguyen1691 2 года назад

I just bought a quad with mamba f405 mk2 mini, 1304 4000kv, 800mw vtx , runcam split hd. could anyone recommend for me the best battery I can use? thanks all

@rajeevgopal1394 5 лет назад

Hi nice review which prompted me to buy this 20*20 stack. Can we power the fc through esc via cables? Or we need to power by using the pads in the fc?

@WhirlyBloke 5 лет назад

Just connect solder the battery connector to the pads on the ESC board and everything is connected internally with the board interconnects.

@rajeevgopal1394 5 лет назад

@@WhirlyBloke Thanks sir

@WhirlyBloke 5 лет назад

@@rajeevgopal1394 That's what's great about these stacks. You just need 12 motor wires soldering, 2 battery wires and 3 camera wires and you're up and running.

@rajeevgopal1394 5 лет назад

@@WhirlyBloke Hi sir bad happned to my stack. Motor 4 not spinning properly its jerky spinning and after some time it stops with an esc beep. I checked with new motors same result . I think i got a defective esc from mamba any clue sir. Pls chk the link below ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6krwHQ3HuUk.html

@WhirlyBloke 5 лет назад

@@rajeevgopal1394 Check the motor bolts on that arm aren't to long and touching the windings.

@AlexCastignani 4 года назад

hi something weird it's happening to my mini stack. when i connect the camera to V1 and vtx to video out i don't have any video, if i bypass the FC camera working fine, i have BF4.1.3. i can't figure out why!?!?!

@WhirlyBloke 4 года назад

It may be a fault on the FC, but first check there's no solder bridges or shorts. Lightly scrub the PCB carefully with a toothbrush and some alcohol (IPA).

@Chocoholic1337 4 года назад

Not sure if you're still actively responding but... I'm using the DJI system which needs 7.X to 17.X volt. I see the 5v pad, but not a 9V or something. Can I hook it up to the 'CURR' pin, will that pass through the voltage it gets from a battery? (I am using 4S of course)

@WhirlyBloke 4 года назад

Best to just check it with a voltmeter to be safe.

@Chocoholic1337 4 года назад

Whirly Bloke thank you for taking the time to reply. I do have a voltmeter, just not really sure how to use it. How would I check the current going through that specific pad?

@Chocoholic1337 4 года назад

Whirly Bloke thank you for taking the time to reply. I do have a voltmeter, just not really sure how to use it. How would I check the current going through that specific pad?

@ShinOfAllah 4 года назад

@@Chocoholic1337 wire straight to the battery pads as long as you stick to 4s, I have dji too 👍

@simtcr 4 года назад

will this work on 2s battery?

@WhirlyBloke 4 года назад

Nope, it's 3-4S only.

@darwinsevilla5834 5 лет назад

does it have current sensor_

@WhirlyBloke 5 лет назад

Yep

@sir_william23 3 года назад

Can u run 2s with this? Thanks

@WhirlyBloke 3 года назад

Nope. It's 3-4s only.

@sir_william23 3 года назад

@@WhirlyBloke thanks for the reply. I still learning these things. Just curious if you could tell me why? Would it just be under powered or not power at all?

@WhirlyBloke 3 года назад

@@sir_william23 It probably won't even power up