thanks, this was helpful. I changed the battery following your instructions. The car didn't need any update in the computer to make the battery work. It worked straight away.
an extra note: the alternator on this car only works when the battery is somehow discharged. When the battery is new you can measure 12.4V and the alternator won't enable. After a while, when the battery is discharging the alternator would enable and you'll measure 13+ V. Discovered this the hard way and thought the alternator was faulty.
Hi ! No on this vehicle is not necessary! In some vehicles, if you install a battery with lower or higher Ah capacity you need to program it! Thank you 🙏
I think I have write it in the Video! You will need 10mm for the battery clamp,13mm for the battery holder,and a ph1 or ph2 screwdriver for the fuse holder!
Very helpful, luckily a 1/2” worked for the battery strap. Unfortunately, replacing the battery did revive my wife’s car. It won’t recognize her key fob and we only have one. Local shops says that’s a dealership repair. Fun fun.
