DIY vs Professional EVA foam boat decking & Flooring | TBNation Tutorial

Подписаться 175 тыс.

Просмотров 141 тыс.

50% 1

Music: From Artlist.io: My artlist-specific License #872969
EVA foam: tbnation.net/pages/search-res...
Shallow Water Anchors tbnation.net/products/royz-sh...
TBNation’s Web Store: tbnation.net/
*Become part of our ProStaff" / tbnation
View entire series: • Creating the JonYak: J...
______________________________________________
Chapters
0:00 - Introduction
1:15 - Recap on how we made the lids.
1:43 - Painting lids with Truck Bed Liner
2:30 - Door Edge Guard Installation2:50 - Sizing, cutting EVA foam
3:57 - Prepping the lids for EVA foam
4:35 - Applying EVA foam to Lids
6:53 - What Router Bits I use7:38 - Routing the Edges of EVA foam
8:30 - Marking guidelines in EVA foam
8:44 - routing internal lines on EVA foam
9:30 - Marking the plunge depth
10:16 - Helpful Tips & Tricks
10:50 - Using a letter Template
12:11 - Burning Stringy edges off smooth
14:35 - Making a Pedestal Lid.
15:26 - Lid under-supports Install
16:40 - Applying EVA foam to Coosa Board.
17:21 - Overview with sides routed only.
17:42 - Making sure its all the same direction.
25:18 - Time-lapse of the entire process*Aluminum DIY Kits:* tbnation.net/collections/alum...
EVA foam: tbnation.net/pages/search-res...
This is a video on eva foam boat decking. This is a full tutorial on how to self-rout it.
__________________________________________________
Check out my new channel! ru-vid.com/show-UCp03... & Merch* tbnation.net/collections/tbna...
Check out our full website at tbnation.net/
* GET EXTRA HIDDEN VIDEOS OF THIS BOAT PROJECT:* Patreon.com/TBNation
High-Quality EVA Foam tbnation.net/pages/search-res...
Full Amazon Store: www.amazon.com/shop/TBNation
* TBNation's SOCIAL MEDIA platforms*
_______________________________________________
Instagram link: / tinyboatnation
Instagram: Handles
@tinyboatnation
@titan_of_DIY
_______________________________________________
*Find us on Facebook
Our Official Page: / tinyboats
Our Group Page: / 1705177409792306
______________________________________________
Music:
From RU-vid Free Creator Library.
or Art-List. License #872969
______________________________________________
Recommended Channels:
Tiny Boat Nation
Tin Can Crew
Fireant Fishing
JDS Outdoors
________________________________________________
Disclaimer: I am not a professional fabricator or builder.
I am a DIY Creator supported by this channel's audience
to put out concepts for people to view.
Modify your boat at your own risk.

Хобби

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@andylimb 2 года назад

Don’t kid yourself. You are a craftsman. You are self teaching yourself and have come along way since 2x4s and foam noodles. Your attention to detail is superb.

@johnobrien1921 2 года назад

I've been watching since the 2x4 days too. It was impressive even back then

@atomicslam1589 2 года назад

I tell you man... if you're a person wanting to learn about all the various tools, and how to use them. Building a boat is the perfect way. What you're doing with that router and that foam is absolutely incredible. What a gratifying project...

@ibrahimadia9788 2 года назад

Great motivating video! I asked for help from others with false hopes given. When I was ready... they disappeared! Thanks again! I am completing my own restoration now.

@kungen300 2 года назад

OMG this is so much cleaner to the gray carpet that everyone using. Top notch and i am going to order some to the next projekt. sorry for bad English i am from Sweden

@gerhardvanwykzs4rum685 2 года назад

One tip i recommended when you want to apply stickers or vinal or this stuff is to use some soapy water i normally use dishwashing liquid then if it isn't where you want it you can move it around without it sticking and if you have it where you want it let it dry and boom it's perfect

@BlindSymmetryLurePainting 2 года назад

Great work Mike. your freehand router skills are sick.

@txapuaamancio5700 2 года назад

The level of details and creativity is awesome well done Sr

@chizepi1557 2 года назад

you are freaking so talented man. keep on killing it !!!

@joonkeeg2871 2 года назад

I don’t know if anyone suggested this, but make yourself a scrap piece of matching material. Then you can use it to do trial cuts or passes with your tool, and get the depth or cut you want.

@smoovefishing 2 года назад

Very nice job routing the lines!

@Phiire 2 года назад

Man that came out so dope!! You killed it dude!!

@w_dub_wilberforcejr 2 года назад

LOVE that deck!!! fantastic job.👊🏾👊🏾🙌🙌 u write really well with that thing!🤣🤣

@bobbysusenbach9687 2 года назад

Thank you for all of your content. Have you ever worked with a Kenner Ski Barge. I have a 1969, 15.5ft (fiberglass) that's in great shape but I would like to put a raised floor and/or a front deck in.

@8jt 2 года назад

That turned out very good! I am currently putting all new carpet and cubbys in my boat. I was thinking about buying that type of floor but was skeptical about it sticking to unfinished fiberglass. What is your thoughts on using that flooring on fiberglass floors?

@dalehelms4739 2 года назад

Epic mate, thanks for putting this up

@marcusolah6245 2 года назад

Dude that’s awesome 😎 Nice job as always

@gerryarnold3691 2 года назад

Hey guys. I love these videos wholeheartedly. I'm starting to put a plan together to build one of these bad boys. But I'm at a loss to what to aim for boat wise. What are some suggestion you can give for affordable boats(make, model, etc., etc.)

@b_aleman 2 года назад

Just came across this video by accident. I can think of half a dozen other applications for this, aside from boats. Cool stuff for sure

@b_aleman 2 года назад

@@TinyBoatNation I could use it on... 1). My company's enclosed trailer to make my own logo 2). My tool boxes 3). My steel topped cooler 4). My gun safes Just to name a few. Seems like pretty heavy duty stuff

@jmlochala 2 года назад

That took some dedication. Great job. How easy is that foam to clean after fishing? Does it absorb liquid and stain easy?

@williamwinn948 2 года назад

When you use a router don't start at the full depth take a little bit off at a time By making a couple passes till you reach the depth. also there is a down cut and a up cut bit Depending if you want the surface to be smooth or the bottom of the groove to be smooth

@sonofafisherman743 2 года назад

Awesome you do some killer work 👍

@Zrelli_ 2 года назад

Hey man. I used to run a big CNC router to cut cooler covers from EVA foam and we found that using stone grinding bits work really well. We would use a cone bit with a small radius at the top. The grinding action leaves a super smooth finish and it also creates a little bit of heat which helps melt and seal the foam. Give it a try if you have a chance. If you can, use a high RPM on that router. Just a little trick of the trade I picked up years ago.

@Zrelli_ 2 года назад

Also the taper in the cone adds for a nice transition between the top of the foam to the bottom of the groove.

@Zrelli_ 2 года назад

Love all the great work! I live to see that notification pop up with a new video. Cheers!

@raulcolindresjr2741 2 года назад

Absolutely killer 🔥🔥🔥

@larrybalowski946 5 месяцев назад

A REALLY NICE JOB

@johnsykes706 5 месяцев назад

Just putting it out there, perhaps a good way to stop shifting and keep the foam flat would be to use strips of thin double sided tape at an appropriate distance on the paper and stick it to a perfectly flat surface. Would solve a lot of the problems I have seen you have during various builds.

@BassBrothersFishingDMV 2 года назад

Awesome man!!!

@plebiansociety 2 года назад

For your border lines, you don't even have to mark them out. Just clamp the piece up against a flat edge (back of your work bench or whatever) and hold the router up against that to make your straight line.

@fishingwithfilitsa 2 года назад

Very good work

@PFLEONARDI0906 2 года назад

Nice work!

@salty_angler1285 4 месяца назад

Hi Mike, I love the look of the self-routing eva. My question is how to hide a seam since my front deck is larger than the sheet of foam? I've done it prevoiusly with the pre-routed eva but really like the clean look of the foam that you're using in this video. Thanks

@TinyBoatNation 4 месяца назад

Hey, you have to overlap the two pieces and cut once. Then pull the bottom piece out, and they should align perfectly.

@tbnationoutdoors-nateeckhold 2 года назад

you win. i dont have the patience for this. but.......now i might just have to do one lid in the middle of the deck. lol 😆

@lstaples007 2 года назад

Pretty slick sir... 👌

@fishingwithfilitsa 2 года назад

Great video, i like

@platinumhandymansolutions 2 года назад

Your videos rock brother! Curious, how many hours a week do you work? I feel like there isn't enough hours in a day for everything you get done.

@dennisattard8638 2 года назад

Do you have any tips for installation on a tight outside bend?

@HazLife 2 года назад

Awesome Vid

@dorkis44 2 года назад

Interested in hearing how this held up over time. Looking to order the material but concerned about the sun lifting panels and shrinking material

@TinyBoatNation 2 года назад

Still works like a boss

@scotthawley7282 2 года назад

You could attach a guide to the router plate by drilling two holes through the square end, and use a scrap of cusaboard. It would speed your process up significantly and have repeatable results.

@scotthawley7282 2 года назад

@@TinyBoatNation not my idea haha half of woodworking is coming up with ways to be more efficient. There's a ton of videos on routers and jigs to improve your work.

@fmslickful 2 года назад

How hot does that get with the sun beating down on it and how long will it last in the sun?

@phatfree151 2 года назад

What hardware are you using on the pedestal mount?

@terryclowers4433 2 года назад

New to your channel,Guys I have a yak but the jon-yak is bad ass🔥👍🎣

@larrymoschenrose4038 2 года назад

Does water stay in those groves and damage that turf?

@floggerSG 2 года назад

Nice job

@AdamRyanA 2 года назад

You gotta catch a 52 inch fish on her now since you made the ruler that big 😜 that black and brown looks awesome!!

@PFLEONARDI0906 2 года назад

Aren’t they all that big…

@eltigredetejas2328 2 года назад

How hot does that Eva foam get in direct ☀️?

@roncerenzia4116 2 года назад

Will this product fade and will it stain its like fish blood and colored scent?

@drewdagnese276 2 года назад

So Sick!!!!

@bwburkhalter 2 года назад

You didn't just up the game, you raised the bar.

@hammondr191887 2 года назад

FYI, Routers run counter clockwise, unless you are routing interior cuts. Thats the reason your lines arent straight.

@davidmedley5970 Год назад

Where did you get the door edge guard? You did a great job.

@TinyBoatNation Год назад

On Amazon. and Thanks!

@JoseJimenez-fb1sr 2 года назад

Where did u get the hatchs

@slivers4007 2 года назад

Get a "formica" J roller to roll that stuff down. You already have a nice template get a template guide for your trimmer.

@MrJhchrist 2 года назад

What's that stuff weigh per sq foot, or sheet, or sq meter, whatever? I checked the link and didn't see specs.

@beardedyaker9767 2 года назад

What bit are you using???

@cliffwillmeng6504 2 года назад

What was the material that you lined the hatches for a soundproof closing with again?

@TinyBoatNation Год назад

It's door edge guard. I get it through amazon in bulk.

@ingeni0usd1rect0r 2 года назад

You shouldn’t knock your skills I’ve been calling your tutorials the Bible for DYI boat building. Just curious what gauge sheet aluminum did you use for the subfloor and hatches? I have a 15 deep v that I need to make lighter and tougher since my buddy and I are like the post service when we fish we go in rain sleet and snow.

@AlIsUpOutdoors 2 года назад

I told my wife that when I get home from deployment I’m buying a new boat to build out. I was expecting some pushback but to my surprise she just said, “that’s okay you deserve it.” I don’t want to get someone’s used beat to heck project that’s corroded beyond belief or anything. I’ve got some time to figure it out. But I really want to build a deep v hull. Maybe a 14-16 alumacraft.

@halsteadmorris3700 2 года назад

I built a 14 ft deep v alumacraft. Awesome boat, cuts through water and is insanely stable. Hits upper 20's with my 25hp yamaha, but can also make good progress with a trolling motor. Unfortunately, it is a rivet boat. I'd highly recommend going fully welded if you're not planning on replacing all rivets. Pin hole leaks and flex seal galore. Granted, mine is a '54....

@buckwild32racin69 2 года назад

I didn’t read comments so if this Is mentioned my apology, but people could put personal logo above the ruler for that awesome personal touch🤙🏽

@henrye718 Год назад

do the routed channels hold water?

@TinyBoatNation Год назад

Not for long

@johnsalinas3593 2 года назад

I wanna know where you get the aluminum angles at

@TinyBoatNation 2 года назад

TBNation.net Search aluminum build kits

@johnsalinas3593 2 года назад

@@TinyBoatNation what’s different Home Depot aluminum angle ??

@kyleporwit462 2 года назад

Recommendation for install on wood?

@TinyBoatNation 2 года назад

Contact cement. Or you can resin and wet sand it smooth and the foam with adhesive will go right on wood just like with the Coosa.

@kyleporwit462 2 года назад

@@TinyBoatNation thank you!

@Menamejosh 2 года назад

What I learned when I make things is that I will notice every mistake that I make but no one else will because they don’t know it’s a mistake. You’re doing a great job thanks for the videos.