DJI FPV Goggles V2 FCC & 1200mw Hack - Complete How-To For V1,V2, Caddx Vista & DJI Air Unit.

Подписаться 54 тыс.

Просмотров 167 тыс.

50% 1

DJI FPV FCC Hack and 1200mw Hack for DJI FPV Goggles V2, V1, the DJI Air unit and the Caddx Vista. This is an updated complete overview and how-to of performing the FCC and 1200mw hacks on the current DJI FPV system. Note this is not for DJI FPV Drone.
Order Secretlab Titan or Omega Gaming Chair bit.ly/2WTEO3F
DJI FPV System - click.dji.com/ACa1EvEdX65IbMN...
FCC Hack File Air Unit - drive.google.com/drive/folder...
1200mw Hack For FPV Goggles V1 and V2 - drive.google.com/drive/folder...
Order the Cube Autopilot and Accessories at - www.3dxr.co.uk
Support us on Patreon and join my discord server - / madrc
Chapters
00:00 Start
02:45 FCC Hack For DJI Air Unit & Vista
04:26 FCC Hack File naco file
06:51 Caddx Vista FCC Hack
07:24 Vista naco file
09:22 FCC Hack Questions
10:26 1200mw Goggles M0D
11:22 1200mw naco_pwr
13:08 1200mw Goggles Update
13:47 DJI FPV Remote Info For Hacks
14:32 50Mbps Mode Info
15:17 Wrap-up
=============================
Mads Weekly Live Stream
=============================
I live stream weekly please join me
=============================
Patreon Supporters Discord Server
=============================
Patreon supporters of my channel get exclusive access to my Discord Server, there I post info, behind the scenes content as well as help and support on the things i discuss on the channel, for more info check out
/ madrc
=============================
Support The Channel
=============================
I would also ask if you find my content helpful please consider supporting the channel via membership on Patreon or there are links here that we may receive a little commission on.
You can also support me via paypal donation to buy me a coffee or donate to help purchase more products and equipment to talk about.
Support Us On Patreon & Join My Discord Server - / madrc
Paypal Donate - mad_rc@icloud.com
Order Secretlab Titan or Omega Gaming Chair - bit.ly/2WTEO3F
Order DJI Digital FPV System - click.dji.com/ALwcdoCMalut8lJ...
============================
Channel Supporters & Sponsors
============================
The following companies are supporters of the channel and we would not be able to make content without them.
www.3dxr.co.uk - The Cube & Drone Related Products
www.telonic.co.uk - Electronics Test Equipment
cubepilot.org - Cubepilot Autopilot & Accessories
=============================
Review & Business Enquiries:
=============================
Review Enquiries - If you would like to work with us on product or service you have please email mad_rc@icloud.com
Business Enquiries & Consulting - We have huge amount of experience in emerging technology and unmanned systems, we offer both in-house technical services and consultancy, if you would like to discuss how I can help you please email awuas@icloud.com
=============================
Follow Me On Social Media
=============================
Twitter: @madrc1
Instagram: ian_mads_tech
Facebook: / themadrc1
=============================
Music Used
=============================
All music licence by Bensounds
www.bensound.com/royalty-free-...
#DJI
#FPV
#Drones

Наука

Опубликовано:

2 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 641

@JoshuaBardwell 3 года назад

For what it's worth, there is a day-1 firmware update for the V2 goggles that is waiting for the new DJI drone to release. Pre-testers are already using these firmwares, but any information about them is currently under NDA. The good news is, I can confirm that I was able to flash back to 0604 from my pre-release (post-0604) firmware. So if any important features are removed, it may be possible to restore them if you are willing to stay on older firmware. In fact, I kind of screwed myself over as there is currently no public way to flash from 0604 forward to the pre-release firmwares, so my v2 goggles were no longer usable with the un-released drone. Oops.

@MadRC 3 года назад

Hay man, nice to see you here, I am honoured. Been there before with prerelease firmware and DJI, care is always needed as a brick is only a click away sometimes lol. I'm not involved in beta testing or helping to admin the Official facebook groups now as I stepped away so won’t be involved in this release now or able to test these things my self until I’m actually able to buy it my self, god knowns when that will be in the UK sadly. It’s certainly not beyond the realms of possibility DJI would change something that affects FPV users intentionally or not so that's why I put the warning in. been there too many times in the passed with other products as DJI does not do a lot of looking backward and as I suspect we both know this is priority right now. I’m not saying the standalone FPV is obsolete or not being developed but for FPV users sitting where you are right now is a safe bet. The fact there is downgrade is good and thanks for confirming that. I’m really looking forward to your thoughts when this thing lands as I know you will give a good honest view from your perspective. I hope you and yours is staying safe in this madness we all find our selves in. Ian.

@rj_travelnchill 3 года назад

Hey Joshua! awesome video. So I was trying to select the files for the FCC hack but it says I need to request for it on google. Would you possibly grant me access. Also I have a Mac. Thank you!

@acarp4766 2 года назад

does 1.00.0606 still work with 1000 and 1200 mw for the v2's?

@richarchdale6522 2 года назад

Hey Joshua Bardwell! I've been trying to figure out how to get in touch with you for a few days now, ( didn't want to just do a comment) but here I am. This hack for the 1200mw will this work on the dji fpv drone? I live in the US. And this is my first fpv drone. Ive noticed I don't get the best signal around things. But doing this with the goggles will it work for the drone?

@roblamont5863 2 года назад

@@acarp4766 mine doesnt

@FLEXZICAN 3 месяца назад

For others who are wondering like me. PSA: if your goggles are in 50mbps mode the amount of channels will go from 8 to 4 because you are using double the bandwidth (this video is made based on 25mbps). Great video mate, always come back here for a refresher course.

@wakkaflakkadown 10 месяцев назад

After a break I always find myself back here for a refresher on setting up some part of my DJI gear to get the most out of it. For clarity you're hard to beat, mate. Cheers!

@petebuttons210 2 года назад

Thank you for adding so much value to the DJI FPV community. It has helped me a lot.

@michaelmatthews6421 2 года назад

This is the easiest to follow video I've seen on this. Great job explaining everything

@tubamanandy2 2 года назад

Just done both hacks on a V1 Goggle & Air Unit with very latest firmware and everything worked a treat first time ! Thanks for this excellent video

@angrypepper3325 2 года назад

Hey Ian fantastic tutorial, you and J.B. are the two I go to for honest straight forward advice, and very understandable, thanks so much, please don’t stop doing what you do.

@MadRC 2 года назад

Thanks man I really appreciate the kind words.

@waynependrigh4669 3 года назад

What a great video. Clear, logical and decisive. Thank you for your work. Appreciated.

@wackyack3165 2 года назад

Clearly explained and easy to follow video - even for a numpty like me - many thanks.

@CaribbeanZapatta 3 года назад

You are absolutely the BEST FPV hands on channel Thank you I have two V1 GOGGLES ONE IS UNTOUCHED OTHER IS MY EVERYDAY I WILL NOT CHANGE THEM 1200 AND 50 PERFECT I HAVE THREE MAVIC PRO ALL THREE ARE ORIGINSL SOFTWARE FROM 2017

@autokanada 3 года назад

I just did hack to my Version 1 gogles and air unit and it works as you described. Thanks !

@miller7123 3 года назад

This is the video I was waiting for! Thank you!

@MadeInChinaCalv 2 года назад

Thanks! Works perfectly on my Caddx Vista and V2 Goggles!

@PaddyMack 3 года назад

Im a MAC user and so is everyone I know. Thanks for the files! You’re the man 👊🏻

@donniewoodley8604 Год назад

works great! just purchased v2 goggles a few days ago and what an upgrade over my budget analog set up. i mostly fly around the yard so 1200 mw i dont really need but its there when i need it. plus having more options than just 25 or 700 is nice too.

@_test_test 11 месяцев назад

do u updated? ive just bought v2s and it goes updated to, i guess, 1.0.7. do it still works?

@MartFPV 2 года назад

Thanks! It works 100% for me, I just bought my Goggles V2 and updated to te latest firmware. I am in the Netherlands. Keep up the good work!

@EXTRA300s 2 года назад

WATCH OUT! Since a few days, DJI is rolling out a new update, or requests to downgrade to a different version of the firmware. This ensures that you can no longer hack, or perform software manipulations yourself! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3wdaIFckAAw.html

@jorisfilms Год назад

still works in 2022! thank you so much!!

@jordigrau3625 3 года назад

Excellent. Just tested on V2 google. Thank you very much.

@dubsrcfpvandfamilyfuntimes913 Год назад

Just did the hack tonight finally after thinking about doing it for 6months I finally did it! Thanks for the video show me how to! I can wait to go try my drones and see the difference! Thanks again much appreciated!

@MadRC Год назад

Enjoy

@bender8783 2 года назад

Exactly what i was looking for. Thank you so much and keep up the great work.

@far_zenith 2 года назад

Thanks for the vid. Quick note - the files still have to have .txt at the end of them. Your OS hides the .txt so it doesn't show, but if people have always show extensions turned on they will have to make sure to keep the .txt in their file name.

@classics967 2 года назад

Thank you for making this as simple as possible!

@alanshearing7515 2 года назад

Thank you so much for making this video, I have now set up 2 Drones . As a newbie invaluable knowledge. Both Drones came locked with 25mw .

@MadRC 2 года назад

Thanks man.

@lucianofpv4276 3 года назад

Brilliant! Thank you ,I’ve been trying to do this for a while now I was successful with your informative Video.

@bigbino9663 2 года назад

Still works perfectly, thank you 👍

@oliviertf 3 года назад

Sir, thanks for detailed explanations - I could follow step by step and set the 1200mW

@pietroseven8228 2 года назад

Finally I got a success, important is to have the same latest versions in caddx vista and in the goggles and than it works. I have to try now video out to smart phone!

@juandavidbarrada 3 года назад

Clear as fresh mountain spring water! Great video!

@Psychosix 2 года назад

Thanks! As of the end of December 2021, the latest/current DJI Air Unit firmware still accepts this hack.

@tinman7743 2 года назад

Many thanks ... concise and easy to follow. Thanks for sharing 👍

@samriley3229 2 года назад

Thanks a million for this great video - really well explained. An FYI for Mac users out there - I struggled to get this working. I followed all the steps in the right order but no joy - however I was unmounting the Caddx Vista after installing the naco.txt file. This seemed to negate the process somehow. Once I installed the file and just pulled the USB out without unmounting it everything worked a treat. Not sure if that's a quirk of my particular Mac system but just in case that helps anyone struggling with a Mac. Thanks again!

@garychanchan 2 года назад

i too couldnt get this working b/c of Mac but he mentions in the video its something to do with the Mac Text Editor so you have to download his TXT file from the description. That ended up working for me. First video explaining the Mac Issue with this hack.

@uasflightops3410 2 года назад

@@garychanchan I cant get my Mac to see the vista when I plug it in how did you manage it please?

@garychanchan 2 года назад

@@uasflightops3410 Try different USB cord. Make sure you launch DJI FPV app, power on drone with Lipo, then plug in the vista.

@noforyoutubepremium3108 3 года назад

Very well done! Super simple to do. Liked & Subscribed (w/bell! lol) Thanks much mate! 😎🤘

@horatio321 2 года назад

This guide works fine - thank you! Heads-up: As of February 2022, with a UK purchased set of DJI V2 goggles, registered and updated to the latest version of the software, the steps in this video work EXACTLY as described. I think users are naming their files incorrectly. The files written in notepad will automatically be given the extension .txt - your file names should be: naco (for the air unit/vista) naco_pwr (for the goggles) If you inadvertently name either or both the files with .txt in the title, it won't work. This might make some users automatically go down the route of rolling back to earlier versions of firmware, which can cause a degrade in functionality. The latest versions of the firmware work, no problem.

@SantiagoVelezRestrepo 2 года назад

Thanks mate, i just got mine and have this doubt! Thanks a lot!

@horatio321 2 года назад

@@SantiagoVelezRestrepo Cheers! It's very easily over-looked. The rumour that the latest firmware somehow prevents this process from working is nonsense. The guide above (whilst long-winded) is exactly how to do it and works like a charm. If you want Betaflight OSD in the goggles AND more importantly - the system to operate in full power mode when the quad is armed - don't forget to open the relevant MSP port in Betaflight Confugurator for the UART that your Tx/Rx connections from Air unit/Vista and your flight controller are connected to. To do this, on the ports page, switch on MSP under the Configuration/MSP - no need to mess with the other drop downs. Joshua Bardwell has an excellent video on the subject: "DJI very short range? Your MSP connection might be why. In my case, on my Iflight Succex TwinG F7 4 in 1 stack, there's a plug onto the FC and it wasn't clear what UART it was connected to. Turns out, it was UART 2. :D

@SantiagoVelezRestrepo 2 года назад

@@horatio321 perfect explanation! Thanks a lot for that, one question, do you recommend always put the RF signal in 1200mw, or just for long range, 250 or.700 is enough? Same with TBS micro tx v2, (i have crossfire) is good to turn on always the 1W or 250 or 500mw is enough? Thanks again mate!

@horatio321 2 года назад

@@SantiagoVelezRestrepo I think there is a strong case for setting the power according to your usage/conditions. If you fly where there are obstructions, or if you intend to do very long range flights, you need the higher power settings. The down side to higher power settings is increased heat and battery consumption. My TBS module sucks the Tx battery at full power. So if I'm staying fairly close, I use the lower power settings.

@SantiagoVelezRestrepo 2 года назад

@@horatio321 Thanks a lot mate!! I really appreciate that, cheers from Colombia

@alefpvc.r.4540 3 года назад

Just tried this on brand new V2s and it worked perfectly. Thanks a lot! ..... just gotta wait for this rain to stop to go out and test it :|

@MadRC 3 года назад

Cool and Congrats I hope the flight went well.

@DeanF 3 года назад

Great concise video Thank you!🙏👍🏻

@prtbk6836 Год назад

Thanks a lot. Very well explained . Helped me a lot.

@directorscut4707 3 года назад

Worked perfectly and simple! Thanks!

@charlybravo 2 года назад

Can you send me the firmwares to do this ? DJI already is hidding this old versions in their website

@MrLeeroyfpv Год назад

you sir are a legend worked first time many thanks so well explained swell

@josefdahari 3 года назад

Thanks for doing this video seems your the only one doing v2 videos so it's much appreciated!! I tried the power hack it didn't take I need to try again. And also I can't seem to get the goggles on the newest .64 firmware but that's another story lol

@josefdahari 3 года назад

Nevermind it works. I had to do a reset all on my goggles first and then do it.

@MadRC 3 года назад

Great news.

@josefdahari 3 года назад

@@MadRC thanks so much brother much appreciated for all your work

@juancarlosmora1417 2 года назад

Gracias Crack, Funcionó a la perfección

@DaddysRCAddiction Год назад

Great vid, you always have very useful info… I have the V1 goggles and they are working great… I just got the V2 as a back up… I tried to register/update but the new DJI Assistant FPV series will not work with my either of my Mac’s… OSX El Capitan 10.11.6… or macOS Monterey 12.0.1… How do I update the V2 so I can use it… Does Windows have the same problem at this point? If not, I can use my neighbors computer. Thanks for your help in advance!!!

@rathifpv 2 года назад

Thank you, this video was helpful! cheers!

@Dan-ro6nj 2 года назад

thanks mate, worked on lastest air unit firmware and v2 goggles at v01.00.06.04 (was afraid to try latest fw on goggles)

@crezzlin Год назад

Well, that was easy.. THANK YOU!

@gf999 3 года назад

Hi, for me works perfectly fine. I use my DJI Air Unit (latest firmware) with DJI Goggles V2 (latest firmware) in the middle of Europe ;) I followed instruction - uploaded one file to air unit (it allowed 700mW), after that I uploaded second file to goggles - it allowed 1200mW. Next week will check how much difference will be between 25mW and 1200mW - my goal is to get higher quality behind obstruction. Best regards

@koenverschuere 3 года назад

I'm still not able to solve the problem on my FPV. Can you specify the firmware version of the air unit? Did you buy the FPV in Europe / CE zone? can I contact you by email? koen.verschuere@fixsus.be?

@tomekb7988 2 года назад

siema mam drona fpv i v2 gogle. Musze wrzucic dwa pliki jeden naco na karte drona, drugi naco_pwr na karte od gogli czy tylko na karte od gogli wystarczy?

@20basty 3 года назад

Really good vid, thanks!

@maxmoviez 2 года назад

Thanks, this video is exactly what i looked for

@RossCandler69 Год назад

that was easy, thank you Mads Tech

@lorenzofrapporti3244 2 года назад

Thanks it was really helpful!

@vogulz Год назад

Great video but I have some thoughts and questions. If you can write to the internal storage of the CADDX, why not the DJI Air Unit? Do I have to permanently leave the SD card with the hack on it inside the air unit at all times now? Just mildly inconvenient considering I have multiple quads with the DJI air unit and not enough micro SD's. Same with the goggles, sheesh.

@ThrunRC 3 года назад

Great Tutorial , very helpful. Thank you very much for sharing.

@MadRC 3 года назад

Thanks for the kind feedback.

@SemostevMedia Год назад

Thanks alot brother. You helped me out today

@Havreringar Год назад

Fantastic, thank you!!

@GrandInfinito 6 месяцев назад

Hi & thanks for your great videos! Does this work with the Goggles V2 (the old ones) and the Avata?

@DronemanfromNepal Год назад

Got my sub with bell icon . Thnx for the video

@meriam4109 3 года назад

Love these short and to the point vid's, thanks a lot. Very useful.

@Maxbl4 3 года назад

16 minutes video with information, that can fit in 5-10 lines of text?

@burdfamfpv Год назад

Thank you so much for a wonderful video just got me some dji v2 and the hack worked perfectly,thank you keep up the good work!!!#burdfamfpv 👍

@talongenxr7799 3 года назад

hey, thanks for the video. especially the whole 50mb video mode not in public channel and what channel it was. maybe its documented someplace but it's certainly not easy to find.

@PirateOnYoutube 2 года назад

Thanks ! Great video 🍕🍻

@alexbucklandphoto 2 года назад

Just a quick question, which channel should I use in the goggles after doing this hack? Just bought a Pavo 30 drone and updated the Vista, I have V2 goggles as I bought them with the FPV combo. Many thanks

@B_Ripping 3 года назад

Still on 750w setting -I'll have to try this soon. Thanks for the info

@DeanF 3 года назад

You won't regret it.

@B_Ripping 3 года назад

@@DeanF When you crank up the power will it interfere with other components or overheat at all?

@mikespeedyfpv321 2 года назад

Hi thank you for the hacks one love great video.

@mikespeedyfpv321 2 года назад

ONE LOVE

@NatWF 3 года назад

Hi, please check the analog mod latency with the Goggles V2. After the upgrade, the Goggles V1 had a delay of about 30ms. I wonder if they fixed this in the new V2 version

@frasersteen 2 года назад

Very informative but extremely long winded, it was a little frustrating to use as reference and ended up finding Oscar Liang's instructions which saved a lot of time,

@DavidWestPhotographer 3 года назад

Excuse my ignorance, im a noobie, i have the dji fpv with the goggles v2, i also own the older big goofles with the giro, racing edition, is it possible to use these with the fpv drone or broadcast to them from the v2 gogfles? Also can you view the mavicpro2 on the new v2 goggles? Many thanks

@ffinybryn 2 года назад

FYI: DJI updated the v2 goggles firmware to 01.00.06.06 on 25th February 2021 (probably straight after this video!). As of December 2021, my new goggles came with 01.00.06.03 shipped and the option to upgrade to .04 or .06. I chose .04 and although my Nebula Vista was .06 out of the box, the "hack" worked and I have 1200mw option. Thanks.

@michael_rauen Год назад

Did you try if the hack works on 01.00.06.06? Because my Googles have that version and I can't seem to get it working.

@chriscflint 2 года назад

Ian I have a question regarding V1 and V2 goggles. I have just bought a set of V2 as I (erroneously) thought they had HDMI out and in, as I wanted to use them with my Air 2 S and RC Pro controller, anyway that is now another problem for later. What I would like to know is how to be able to use both sets of goggles from a single air unit (me flying) so I can let spectators watch the flight with the other set. Do you perhaps know what I need to do as I note that you can only bind one set of goggles to one air unit at a time. Your help is appreciated.

@chedil08 10 месяцев назад

Hi, great tutorial. As you said the remote will follow, will this then be compatible with wtf os? Thanks

@MrBeatboxD 3 года назад

Important note for connecting the caddx vista. you need to power the viste BEFORE connecting to usb otherwise it wont show up as a drive. (at least that was my struggle some time ago)

@devon582 2 года назад

I did that still did show up

@adacho2190 6 месяцев назад

thanks! its work!

@mardalsow444 2 года назад

thank you very much

@zinnbauersepp 2 года назад

Hey thanks for this great video I‘ve got a question.. is it possible to bind the caddx polar nano hd air unit to the V1 goggles?

@MadRC 2 года назад

Yea absolutely they are all compatible.

@jakubmalinowski7470 7 месяцев назад

Thanks

@Tim_FPV Год назад

it worked thank you :))

@tomhoogendoorn9643 2 года назад

Great video! What about option 'auto temp control', is it better to put it off?

@MadRC 2 года назад

You will not do any damage with it off. It just helps stopping it overheat on the ground and stopping recording.

@floatypiet Год назад

Thank you!

@therunandgunshooter3129 3 года назад

thank you!!

@RizHassan Год назад

@Mad's after the hack will it rebind with DJI FPV Drone and remote? I use my goggles to fly the DJI Combo FPV drone and other air units on a plane as well.

@jsxgmanfam 2 года назад

I did all you said in the video and thank you! one question.... why is it when I switch to 50mbs mode I loose all channels but the original 1,2,3, and public 8? For a moment it will show both channel 6 and channel 8 chosen at the same time. Then when I switch the channel i only get 1,2,3.

@rrenatosouza Год назад

it happens with me too

@evil.hamster-fpv 8 месяцев назад

Hello thanks But must i put this file only to air unit or for googles ass well?

@gmrod_fpv1349 3 года назад

Amazing video my friend

@Glenn.J Год назад

Is the range going to be the same regardless if you are 4 or 8 channels but are able to go upto 1200mW? Or for max range do we go the FCC route (8 channels) and 1200?

@Ugly_Baby_Gaming 2 года назад

is this legal in to do in the UK? or is it just frequency that needs to be set correctly to not break any law? i want to have maximum range at all time to prevent loosing signal on ether radio or goggles even if flying close it just makes sense not to loose your drone and cause an accident

@chewthis5805 2 месяца назад

Nice tutorial man,,, i have dji google 2, and how to see unlock success or not with vista?

@BMFPV Год назад

Great info as always man thanks! It's now 08/2022 and I have a set of these goggles on the way, doe's the power hack still work?

@MadRC Год назад

Yes both FCC and the power hacks all still work.

@BMFPV Год назад

@@MadRC Thanks man, sorry to bug you some more but will it work with the latest firmware that blocks downgrading. The internet is telling me yes and no lol but I trust you're advice more.

@sajandevshi8520 Год назад

@@BMFPV keen to know this too..

@ellishayden5979 7 месяцев назад

Do have to apply the hack to the Google's and the unit?

@le_ti_lik 3 года назад

Thanks for the video! But, question is this, is there an fcc hack for the DJI FPV drone? I can't even find power output options in the menus.

@MadRC 3 года назад

No their is not at this time. It’s entirely different firmware.

@tombkn_ 2 года назад

I crashed my fpv drone when the video feed cut out… literally was 100 yards away from me … goggles only putting out 25mw Glad I’m watching this video now

@bennyeyeballs880 2 года назад

Hi. So I plugged my air unit in. I did as you said , but when I turn my goggles on and air unit It doesn’t show all 8 channels but it shows ch 8 public and I select that , is this still the same with the 1200 MW ?

@an_R_key 2 года назад

thank you!!! :-D

@adrianquirino 2 года назад

hi friend, for air unit dji is okay the max mw hack, but if do that for dji fpv combo, are you get anything better?

@sattyc9916 2 года назад

Amazing video my friend.Exactly what I was looking for. I did the upgrade just fine. My screen in the goggles shows the 50MBPS . However my transmission lost connection now. It binds and then 10 seconds later goes from green to red. Why is that? Please help . Assoon As I saw the 50MBPS I was so happy but I cannot do any test flights because it won't connect with my Dji remote now. 😢

@MadRC 2 года назад

I would just reset and rebind everything.

@sattyc9916 2 года назад

@@MadRC Thank you for your reply Sir. I did that literally 4 times now. After resetting I finally see 4 channels 4th one being public but assoon as I assign another channel , I lose controller signal on the Dji remote. light goes red. but the drone doesn't beep even though it is supposed to after signal lose. what am I doing wrong??

@cesargurc911 2 года назад

hello, I have already done everything explained in the video and it has not worked for me neither in the glasses nor in the cadxx view that could be I have the v2 and version 606, when I connect the drone to the lipo and turn on the googles it does not let me accessing the menu only gives me the image will they have any defect?

@robi5722 2 года назад

Hi, my win10 pc doesn't allow me to interact with the Vista even if it sees it because it asks me to format it due to unrecognized file system in the Vista volume? What should I do? I havn't updated to the last fw, it's still on 1.00.0606 which allows hacks, do you have any idea? I'm afraid to brick the vista formatting it (in which file system...?) Thanks

@josec5276 2 года назад

Thank you very much for the video. One thing that is not clear to me, if I want it at 700, I only have to do it on the caddx? or do I also have to do it on the goggles? Thanks

@MadRC 2 года назад

Only Caddx. The Goggles one is for 1000/1200mw only. FCC is 700mw.

@dolbyblustar 2 года назад

Thank's man, I tried the Goggle text file to fly my DJI FPV Drone. But the menu is grayed out. Anyway I can make it work?

@will450ktm 2 года назад

Thank you new sub 👍🏻

@MrSabram07 Год назад

Also another question please. Does having the eight channels guarantee the FCC hack? Meaning is there a way to not have the FCC hack and still see the eight channels? Appreciate any help you can give me

@mariohallero4058 3 года назад

What happens if I use my V2 Goggles with both, the DJI FPV Drone and the FPV system on another Freestyle drone? When I switch between the drones, I need to set the Goggles to the specific mode, but will the hack work with the FPV system after I switched back and forth?