Dodge / Jeep "RE" Master Solenoid Service Kits - 42RE / 44RE / 46RE / 47RE / 48RE 

I purchased Cascade Pressure Solenoid Service Kit (224432BAK). Watched your videos, and was easily able to put my sons truck back on the road. A 97 ram sport 4x4, I changed the spring, and the two modules, filter and fluid. And the truck shifts perfectly. What a fantastic fix for under $200 bucks!

Great Kit You guys have!!!, worked perfectly and only took and hour.... no need for valve body removal either... plug and play.

I own a 1999 Dodge Ram 1500 that was not up-shifting properly. We did some internet troubleshooting before taking anything apart to try to narrow down possible corrective actions. We though we had a problem with the governor pressure solenoid which seems to be a common problem. Luckily I ordered this Master Kit because when I tore into my transmission I found the Accumulator Spring broken. With the help of Cascade's video's I was able to install the complete kit in my home garage in a couple of hours. The quality of the products, fast shipping and very competitive pricing make Cascade an easy decision.

I put one of these master solenoid kits in my '93 ZJ earlier this fall. The kit is absolutely great, and Cascade has put good videos on youtube for install. I really appreciated the 3-4 accumulator spring being heavy duty as I found my OEM spring had shattered in multiple pieces. Some parts are hard to reach, but my son and I were able to install all the parts in this kit without pulling the valve body out. Thanks Cascade..

Cascade: My initial review was nothing in comparison to the review I can state with absolute confidence today. The actual payoff of this kit that I’ve installed on my 1997 Dodge Ram 2500, 46re transmission. Cadillac smooth shifting, yet the real payoff came when I connected my 8000 lb, 29ft camper. Nothing strained my truck at all. Not a long road, not a slight grade and absolutely no hill around challenged my truck!. I pulled that camper with the greatest of ease. Anytime shifting needed to take place the cascade transmission parts were right there to perform exactly as designed and stated. If the previous owner would have installed this kit, he would have never sold this truck. Most people are frightened to fix this own vehicle, I on the other hand enjoy it. If I could go back to when I bought this used truck, this would have been my very first repair. Cascade you have unlocked the potential that the Dodge manufactures dropped the ball on. In fact Cascade truly has hit the ball out of the park! I recommend this kit to every dodge owner on this planet who thinks he has an ok truck, buy this kit and your truck will become top shelf, without question, without a shadow of a doubt. All Dodge/Jeep forums should be made known of just how crucial this kit is for what an automatic transmission should be built like. “Simply The Best”...

@TCF2148 the harness can be swaped/replaced leaving the valve body in the truck ; simply drop the 3-4 accumulator housing down to access the connector - i welcome further questions if you email me directly from our site

@CascadeTransParts I was watching one of your other videos when you did an RE master solenoid kit. You removed the valve body to replace the OD and lock up solenoids. You mentioned not being able to get to the connector for them without the valve body coming down. I must've mistaken the transducer for the solenoids. Not surprising since this is my first automatic repair. Well, the book says OD solenoid harrness, so I'll do a bit more research before I start chucking parts.

no , if phone was published we couldn't handle the call volumes we are located in Oregon , Just outside of Salem

@TCF2148 Hello , the kit can be installed without removing the valve body which saves about 30 minutes ; simply drop the 3-4 accumulator housing to access the connector , and replace - we are working on a supplemental video to show more information

Love the video, My 2004 Jeep Grand Cherokee has only 70000 and has had 2 trans filter changes. The trans now when I I step on the gas when at a stop and it down shifts it makes a clunk sound it does not do this when gradually accelerating . Can anyone help me to know what this is and if this kit will help?

That's a decent kit. I've heard others praise the B&W solenoid on RU-vid as well. My shift problem I'm having with my "01 Ram 47RE is that it shifts through 3rd in about a second under all speed and throttle conditions. The shop manual for the truck says it's a short in the OD harness and since the valve body has to come out for that, I'm just going to give it a full kit and hopefully avoid opening it up again any time soon. I'll still install a drain plug anyway, though.

Nvm found it, might do this next summer when its warmer.

I ordered this kit hope it works for me

I just got mine in.

Hi, really like your videos my questions are what are the torque specs on everything that would be removed to install this kit? i am in the process of buying this kit and i am concern about the torque specs thank you.

Nice kit....

@TCF2148 Those are actually the solenoids in the upper left corner of the frame as I thought. I'm pretty sure this does cover all the parts I'll need, and it probably will be very easy. Next question: Since the 3,4 accumulator piston cushions the engagement of those gears, does the new spring make it noticeably more harsh? (I should know this already)

How do you unplug / replug the end of that wiring harness?! Everybody says this is such a "simple" job, but what else do I have to take apart to get to that plug?

Is that a Input Sensor ? I cant find the dang thing I have some whack diagram that says the input sensor is where the neutral saftey sensor ? It must be inside this is gonna kill me! I have took that 42RE pan off like ten times To have rebuilt then fixed leaky pan bolts one agonizing bolt at a time too see if fixed due too bugetarian regiments. I had a master rebuild kit installed which is pretty much clutch bands O rings springs etc Installed Feels Tight and Stiff! Now So where Im at I need this kit and ....My problem is that It stalls but when I give gas does not die kinda sputters then goes ok then shifts to second then down shifts seemingly slippy without losing speed then after that shifts fine solidly through too 3rd and other gears and does not really slip most the time I mean some times it feels perfect Lets see how long it takes me too figure out

I just bought this kit over two weeks ago and still haven't received an email saying the kit shipped. I tried emailing you guys with no response. Tried calling the number found on Google and it sounds like a scam call. This is last resort reaching you on your RU-vid channel. Please get back to me asap.

most of the liberty's contain a solenoid block please see our website under 42RLE

Will I have to remove the Valve body to replace TCC and OD solenoids in a 1994 dodge ram 1500? I have a chatter at 40mph which stops when I hit the brake peddle. No Engine light codes. Some concern about Torque Converter, Folks telling me that this problem could be caused by either or. Before I spend the money which is the most likely. THx Dave

a 1998 has the canister solenoid and wont come out. this shows the newer style. Im trying to understand why this comes up on a 1998 search

What is different on my 93 zj 42re? The so called Tcc I ordered at napa is different

I need this for my 46RH PLEASE HELP. Where can I find this kit The CORRECT 1

you say this upgrade the 3 to a 4 pin sensor. what modifications are required to the harness to make this upgrade?

BE SURE TO FILL THESE TRANSMISSIONS WHILE RUNNING IN NEUTRAL ON LEVEL GROUND THIS WILL EXHAUST ANY AIR THAT's IN THE SYSTEM. www.cascadetransmissionparts.com/

yes if you email me through the contact us page i can send address info. We accept money orders , cashiers check , and personal checks - pers checks have a slight shipment delay

I hope I can get an answer.. I have a 2007 dodge nitro and suddenly my transmission wont shift into reverse gear. I took it to a dealer and they don't find anything wrong I've read the report where it says the transmission have to be open to see what's the problem. dodge 2007, 95,000 thousand miles, 3.7 lit, automatic trans, . what's your opinion ?...please

I have a 99 Jeep Grand Cherokee shifts in OD ,an jeep worms up an comes out of OD ,let rpm drop an then exselorat slow an will shift back in OD ,then go's for awile an repeats the same over agen , can you help.

I'd like to order this kit. But I do not use a credit card nor do I use my paypa any more. Do you take a money order or cashiers check? You provide no physical address on your site. Thanks

i have a 2002 dakota r/t it has a 5.9 dont know what size transmission it has how much does the master solenoid kit cost thank

How much for the kit

Why are r45rfe so different than all the rest

I got a 2002 jeep grand cherokee overland AWD and my transmission have a shifting problem when i need to go over 100 km/hr will a solenoid kit help me out.

IS this kit available for 1994 Model Jeep Grand Cherokee, V8, 4x4 models?

Hi I live in the UK how can I get this product, I have a Jeep liberty KJ 2003, Im coming up with code that got to do with the soloniod.the car in Africa and I want to do it myself when I get back there, so how do I order it to the UK?

Was just on your website and I was unable to locate the 22420BK Kit. Is this kit no longer available from your business? Thanks

hello i have a 2001 dodge ram 1500 3.9 v6 how much it would be for this hall kit thanks

i would like to order one of these kits for my 1994 grand cherokee 42re i emailed you on the web site

Hello - please feel free to visit our site , all pricing is current

hey how can I get in touch. with you guys

Hello , i can't say for sure without more info - you are welcome to email us through our website

Hi Cascade transmission parts my trans isn't always shifting into drive and when it does it only does it for a couple minutes then stops moving. Have you herd of this before? Also wines somewhere in trans when it does shift but no whining when it won't shift into drive. Its a 98 grand Cherokee with a 4.0l 4x4 with a 42re. Would you think this kit would help maby? What are y'all opinions.

You say "the Sonnex spring is 126 thousands and nearly twice as big"...the original spring is 63 thousands...63 times 2 is 126...so that is twice as thick....not nearly...just saying...

koja je cena ovog kompleta i gde mogu naruciti sve ovo

How much? Thanks

Does the kit come with remanufactured , rebuilt , or new , sensors?

I've sent you E-mail and have not heard back from you. I would like to buy the kit for my 97 Jeep Grand Cherokee. Can I just come by and pick it up from you since i live not to far?

Wouldn't it be easier to have the address on your site with phone number? Thanks

Are there tests or things to check to see if you need a trans rebuild or just selinoids ?

i would like to order one of these kits for my 1994 grand cherokee 42re i emailed you on the web site i found the kit on your site i would like to ask a couple questions

Hfe 1995

do you have a Canadian phone number because i can't phone out of Canada,,I'm trying to order this kit,,,can i give you an e-mail or I really need this kit