Don’t swap Blazer rear disc brakes on ya Gbody until you watch this. SMH 🤦🏾‍♂️

Подписаться 3,2 тыс.

Просмотров 5 тыс.

50% 1

If you swap Blazer rear brakes to your GBody, you might need to do this.
I went to the Pick-n-Pull and got the rear disc brakes off a 2002 S10 Blazer. Installed on my 1986 LS1 Swapped Monte Carlo SS. If I can do it you can do it.
HOW MUCH DOES IT COST TO LS SWAP YOUR VEHICLE?
• 86 MONTE CARLOS SS: Ho...
KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED GBODY)
• KORE 3 BIG BRAKE UPGRA...
Parts list: 1998-2005 Chevy S10 Blazer 2WD
1. Rear calipers w/abutment brackets (used from salvage yard)
2. Rear parking brake assy (used from salvage yard)
3. Rotors and Pads (New)
4. Rear coilover relocation bracket (only needed if running coilovers in the rear)
5. Longer wheel studs. (my car is 12mmx1.5 studs, I used ARP part 100-7708)
6. Custom rear brake lines. ( you will have to adapt the rear hard line to a pair of rear soft brake lines running to the calipers. PENDING, I HAVEN'T DONE THIS YET
7. Adapter the G-Body Parking cable to work with the Blazer parking lever. (I purchased new Blazer rear parking cables, Haven't installed yet. I will make a video when I get them to work)
BMR Suspension COIL OVER CONV WITHOUT CA
Part Number: 142-CCK461H
www.jegs.com/i/BMR-Suspension...
ARP .509" Knurl Wheel Studs Most late GM (F-body, Vette)
Part Number: 070-100-7708
www.jegs.com/i/ARP/070/100-77...
Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035R
www.jegs.com/i/Dynamic-Fricti...
Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035L
www.jegs.com/i/Dynamic-Fricti...
R1 Concepts Optimum OE Brake Pads, 1997-2005 GM, Position: Rear
Part Number: 820-2551-0729-00
www.jegs.com/i/R1-Concepts/82...
Irish Marcelle Productions
Equipment used for production
iPhone 15 Pro Max (A Camera)
Rode Videomicro(shotgun mic)
Movo Edge RXD (wireless mic)
Movo wireless mini-up duo
iPad Pro 11inch
Blackmagic Cam (Camera App)
Lumafusion
Beats by: Crank Lucas

Авто/Мото

Опубликовано:

18 ноя 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@87SSBOI 7 месяцев назад

Awwww man…I’m tuned in👀👀👀

@87SSBOI 7 месяцев назад

Great video man…we appreciate the heads up!! This is good to know before I get started on mine

@WarrenGBody 7 месяцев назад

Yeasir! Skip GTS Designs is my club brother. I believe I was there the day he recorded the vid. Peeps would ask how to do it and he said man imma make a real time vid from start to finish…He brought all the LS swaps, f body brake swaps and all that to the front. Before his vids, nothing was available. Clean ass work fammo!!🏆🤩🏆🤩🏆

@adammcdowell8620 6 дней назад

I have put 98 up blazer rear discs on g-bodies, chevelles, various other 10 and 12 bolt vehicles. I normally have to space the caliper bracket out a little bit on a few I've had to machine .020-.030" off the caliper bracket to get it centered just right..

@acollins9277 7 месяцев назад

MC is coming along well….👍🏾✊🏾

@lucky-Tx7 7 месяцев назад

Man LS! It's coming along really good!

@drprick7432 6 месяцев назад

Very educational. Thanks!

@Mr73cheyenne 6 месяцев назад

Very good and detailed information 👌🏾. I def sub'd

@willierebuildz9182 7 месяцев назад

Nice work 👍🏿👌🏿

@South_Georgia_Cargo 7 месяцев назад

I tell you this one time, changing that proportioning valve is one of the worst things I've ever experienced.😅 That is all.

@PENNYLS1 7 месяцев назад

That part 👈🏾. Damn fasho

@perrystaggs4726 Месяц назад

Hello sir I just subscribed to your channel. I'm also doing a blazer disc break conversion on my mc ss and Im wondering where did you get the dust shield with the caliper bracket attached to it. I really can use your help

@PENNYLS1 Месяц назад

I got them from my local pick n pull

@sherrodnelson3755 7 месяцев назад

😂😂😂 Milwaukee gloves and a green RYOBI impact. All good brother. Information will be used thanks.

@PENNYLS1 7 месяцев назад

Brand Names huh

@sherrodnelson3755 7 месяцев назад

😂😂😂 j/lk

@Powered_by_Genetics 6 месяцев назад

I'm glad I watched this. For my 87' Buick Regal-T, do I need to Buy/Install a Proportioning Valve for this Rear Disc Brake Upgrade? ✊🏽💯🤔👀

@PENNYLS1 6 месяцев назад

Yes, you will definitely need a disc to disc prop valve.

@Bball128 7 месяцев назад

Bro do you think that some c6 z06 4 pistons calipers would fit on these brackets

@PENNYLS1 7 месяцев назад

I’m not sure but I doubt it. I’m sure someone makes a bracket for that though

@coreyglen1992 16 часов назад

Where did you place the washers behind the dust cover between the bracket or behind the bracket housing

@PENNYLS1 16 часов назад

@@coreyglen1992 between the rear end flange and the brake backing plate (not the dust shield)

@coreyglen1992 16 часов назад

@@PENNYLS1thanks

@coreyglen1992 16 часов назад

Thanks bro.... you're super helpful and you make it simple 😅

@coreyglen1992 16 часов назад

Keep doing what you're doing 💪🏾💯🙌🏾👍🏾🤜🏾🤛🏾✊🏾

@mr.404atl2 7 месяцев назад

Can you run stock montecarlo rims with the blazer swap?

@PENNYLS1 7 месяцев назад

Yes The blazer brakes will clear the Monte Carlo 15” wheels.

@marcosponce4422 3 месяца назад

Are these the camaro backing plates?

@PENNYLS1 3 месяца назад

Blazer

@joraybeast2460 7 месяцев назад

Where did you get the proportioning valve from?

@PENNYLS1 7 месяцев назад

Amazon but you can get it from Summit Racing

@joraybeast2460 7 месяцев назад

U got a part number for it

@PENNYLS1 7 месяцев назад

@@joraybeast2460 labwork Performance Aluminum... www.amazon.com/dp/B0865SVHR4?ref=ppx_pop_mob_ap_share

@JF-sv7qo 5 месяцев назад

Part numbers on what you did not get at junk yard

@PENNYLS1 5 месяцев назад

Links are in the video description

@kingkennotv1973 7 месяцев назад

Did you have to add spacers to give the caliper and rim clearance?

@PENNYLS1 7 месяцев назад

No spacing was needed for wheel clearance.

@kingkennotv1973 7 месяцев назад

@@PENNYLS1 bro what!!! My original rims are touching the calipers. I also seen another video where someone used a spacer plate.

@kingkennotv1973 7 месяцев назад

@@PENNYLS1 what size are the rotors?

@PENNYLS1 7 месяцев назад

@@kingkennotv1973 the front brakes cleared my stock 15inch wheels. I have 17inch wheels. Not sure why the rear is rubbing if the front cleared.

@kingkennotv1973 7 месяцев назад

@@PENNYLS1 yeah it’s actually the front that’s rubbing. Idk why I tried to do 2x already. Idk but thanks though