Doubling The F-100's Horsepower By Improving the 351 Windsor's Bottom End - Truck Tech S5, E9

Подписаться 1,6 млн

Просмотров 103 тыс.

50% 1

The engine goes back together in the '74 Ford as the guys hope to improve power of this weak 351 Windsor. New rubber, rims and custom exhaust will wrap up Stage 1.
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
ARP: ARP Ultra Torque Fastener Assembly Lubricants
More Info: pntv.us/pn_pt_14789
ARP: When racing professionals in NHRA, IHRA, NASCAR, and Formula 1 competition need bullet-proof fasteners for their high-performance machines, they turn to one company: ARP.
More Info: pntv.us/pn_pt_14788
Edelbrock: Edelbrock Total Power Package 400 HP 351W Small Block Ford Top-End Engine Kits
More Info: pntv.us/pn_pt_14776
Holley: Push your racing performance to the next level with Holley Track Warrior carburetors. The aluminum contoured main body design weighs less and adds horsepower and torque.
More Info: pntv.us/pn_pt_14787
Pertronix: Digital HP Ignition Boxes
More Info: pntv.us/pn_pt_14781
Pertronix: Flame-Thrower Ignition Coils
More Info: pntv.us/pn_pt_14782
Pertronix: Flame-Thrower Universal MAGX2 Ceramic Boot Spark Plug Wires
More Info: pntv.us/pn_pt_14783
Pertronix: PerTronix Flame-Thrower Plug and Play Billet Distributors with Ignitor II® Module
More Info: pntv.us/pn_pt_14780
Summit Racing: Cooper Cobra G/T Tires
More Info: pntv.us/pn_pt_14786
Summit Racing: Proform Ford Racing Licensed Aluminum Valve Covers
More Info: pntv.us/pn_pt_14778
Summit Racing: Proform Ford Racing Licensed Slant-Edge Air Cleaners
More Info: pntv.us/pn_pt_14779
Summit Racing: Summit Racing® Aluminum Roller Rocker Arms
More Info: pntv.us/pn_pt_14777
Brothers Truck Parts: Interior Replacement Parts
Matco Tools: Matco Tools are the official tool supplier to Truck Tech

Авто/Мото

Опубликовано:

5 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 135

@raymondforsythe8676 2 года назад

The title says bottom end, y’all did top end.

@slowstang88 2 года назад

@@bigboreracing356 bottom end needs flattops

@BobbyOfEarth 2 месяца назад

In 2005 I bought an F100 from a guy in Texas for $7K + shipping, looks identical to your 74. Then l bought a stroked Keith Craft 421 short-block that made 618 hp and 548 ft.lb. Then added a complete 4-link system, the design of which, I was fortunate to get from Art Morrison.

@MrArrakis9 2 года назад

hey guys... incase you didn't know LT has his own channel here on the u tubes with some fresh projects. you guys should definitely check out his channel and give him some love.

@beans4269 2 года назад

channel name?

@MrArrakis9 2 года назад

@@beans4269 LawrenceLTTolman

@kevincrawford7439 Год назад

Didn’t know We-man started building engines.

@pratyushganesna6041 2 года назад

Lol, the new guy standing inside the engine bay and putting head covers.

@DBSSTEELER 2 года назад

Just adding a fresh set of bearings and flat top pistons would have made a TON of difference in power.

@gregbrightwell4682 2 года назад

This is a staged upgrade series. They are starting out like a normal entry-level wrench. This is supposed to finish up as a fabrication tutorial

@brandonbell3089 2 года назад

No it wouldn’t have. The bores are wore out. Hell a shim head gasket would bump the compression up if that’s what your meaning

@derrickirwin75 2 года назад

I think he’s explaining what he did with his f100…..

@totensiebush 2 года назад

if bearings get you any power, things are pretty damn wrong I'll say that the title is quite wrong: they aren't really modifying the bottom end at all, it's top end that they're improving.

@jondavis3582 2 года назад

factory heads on a ford choke it to death ya gotta open the exhaust valve to make'em breath thats what i did on my 460 but i eventually went with edelbroke heads and should have the 1st go around b4 spending a bunch of $$ on head work...rookie mistake haha

@marioleal4307 2 года назад

Can you do a video building a 5.3 with forged pistons from summit and a Texas speed 232-234 cam and nitrous and ported original 243 heads

@jdrods1519 2 года назад

I thought we were going to see some dyno numbers! Either way, awesome build!

@rjacosta1070 2 года назад

Yes I was waiting and did you achieve the horsepower you were looking for

@joefergerson5243 2 года назад

My first engine build was 351W back in the early 80s. 👍👍

@robertbelote5273 Год назад

Cool episode. I like it. With that being said , modern media is most chevy or dodge as far as domestic goes . He'll we can't even get a dedicated ford episode without something else popping up. This episode had that 08 Silverado, I know you guys do adds to pay bills but damn man . Ford guys/gals are often disappointed.

@jc3745 2 года назад

I think I would have done a better job cleaning the timing cover and the old fuel pump. The inside of the cover looked pretty bad and the pump was still grimy

@VinceGuzman 2 года назад

This is a awesome how to stage 1 truck

@danmallery9142 2 года назад

Absolutely love what you have done with the truck. One thing I was trying to remember on a 351, wasn't a couple of the head bolts actually going into water jackets and need to have sealant applied to them?

@michaeltaylor5451 Год назад

Yeah, pulled the lower intake off my '95 F250 with the 5.8 and the fore-most bolts stayed in the heads as I loosened them. Don't know what Ford engineers were thinking with that design. The option was to have the heads redrilled and heli-coiled or go aftermarket. Those bolts rust-welded themselves in place, there was no saving them. I have a feeling the water pump cover is going to give me the same type of grief.

@wingman5985 2 года назад

It would be nice to see how the ports match up on that Edelbrock equipment before you installed them. Most gearheads are going to sleep with these parts for a few days before they send them out to the garage you know. I like Edelbrock stuff.

@KingJT80 2 года назад

It won't matter on a street pickup but I get what you're saying

@nothsim 2 года назад

I love old trucks. You need to get right in there to do anything.

@ryanlee9945 2 года назад

Good to see LT back!

@gernblanston4956 2 года назад

He's not back , this is an old episode

@75novaguy73 2 года назад

I had an 86 F150 with the 351w in high school. It made what I considered good power with the "new" reman engine we put in it, with those sort of upgrades id have never had any tires and would probably have been in trouble lol

@rjacosta1070 2 года назад

I agree with some comment pistons and cleaning old parts. Don't know, would an electric fuel pump be better than stock? Can someone answer plz

@glenndavis6212 9 месяцев назад

Why use a flat tappet when a hydraulic roller give a lot more power

@sargepent9815 Год назад

Why not go full roller cam? They make a retro mod kit that ditches the flat tappet lifters for rollers. Seen serious issues with after market flat tappet lifters lately and for not that much difference in cost, you can eliminate that problem as well as be able to run a much more aggressive cam

@jamesunderdal8976 2 года назад

Was a nice build I would have added a good quality stroker kit to say 393 or 408 and bumped to the compression a bit to finish it off would make a stout little windsor.

@shawnboy4368 2 года назад

Yea I agree but that build was so they can run 89 or 87 octane and the truck will be very streetable ! And it's not worth the extra 50-90hp . Iv had and built so many engines from 14:1- 11.:1 compression with 650+ lift and hated the street ability and running race fuel or 93 octane only joy I had was when I put my foot in it it made me smile

@jamesunderdal8976 2 года назад

@@shawnboy4368 for sure man if your like me you always want a little more lol I'm fortunate we have a local pump with 100 octane unleaded for the same price as 91 premium.

@sdvten 2 года назад

They could have at least freshened up the bottom end.

@DBSSTEELER 2 года назад

That would have blown their budget. But you are correct.

@shawnboy4368 2 года назад

@@jamesunderdal8976 yea , we have a e85 stations they could do a e85 build and stressed things like the different types of carburetors who's not all carburetors or E85 compliant just as well as not all the fuel systems so that would be something cool if they could do as well

@florianfischer3127 Год назад

Does this also Work in a Marine aplication wir a 351 w

@deanduthie9014 2 года назад

if u know u know ..heads = power

@matthewbarton9011 2 года назад

would keeping a points style distributor in combo with these edelbrock heads be bad for the engine? I already acquired a stock points distributor but now Im considering these performer heads...

@mattcurtis9980 2 года назад

At 4000 rpm...no. at 6500 rpm...kinda yeah.

@jeffreychristianson9134 2 года назад

This LS Chevy is a good motor in any Chevy Vehicle.That is why Ford had to create the 5.0 Coyote. If you are going to engine swap out that in there and you will have a beast 380 to 500 hp. All depends on how you set up the ECU programming. Plus it's way lighter than in old iron block.

@SavageDimensions 4 месяца назад

2 bolt or 4 bolt main?

@ResurrectDecoys 2 года назад

Wish a company would start making the gt-40 lowers for these again. Can pick an explorer upper all day at the wrecking yard

@rickdemorgan8951 2 года назад

Use studs to install intake manifold.

@magdump7380 2 года назад

Agreed.

@44hawk28 2 года назад

It's been awhile since this video came out where in the world did you get the idea to point the number one cylinder to the back of the engine. The number one cylinder is on the back of the engine. Even though Ford doesn't know how to number their cylinders, you'll always point the rotor towards the number one cylinder. But I've only been working on cars since 1964. I've never seen anybody fail to do that. The only time that changes is on a Chrysler product where they are smart enough to actually design the distributor to only go either in Phase or out of phase by 180°. I have never watched any of these people on RU-vid, nobody, show how to phase a distributor that slightly out of phase. And there is a procedure for that. And everybody makes too big a deal out of a little bit of dry rot on tires. Pray some 303 protectant on it, even on the tread let it dry overnight and leave it the hell alone. If you think they're a bit dry do a second application.

@webefree3125 2 года назад

Wow, an F-100, and you could put a snow plow on it, now Ya need a F-350 piece of JUNK!!

@THROTTLEPOWER 2 года назад

👍👍👍

@ferdinandcuevas8457 2 года назад

What would a Trick flow top end kit be worth on power over the Edelbrock top end kit ? And would You use it ? Thank You for any information that You could give Me . 🇺🇲🇵🇷🦊👍

@KingJT80 2 года назад

Which kit? The 170 kit is meant for 302s like mine that's a small ass head for a 351 the Edelbrock rpm 351 are 190s

@ferdinandcuevas8457 2 года назад

@@KingJT80 the 190 kit

@johnmyers9960 8 месяцев назад

Hold up wait a minute....I just did what you did but mines is bored 40 over and not elder but equivalent...and I'm running a 600 elder and you read forms and they say 700- 750 to much 650 perfect...some one pls ?? Help me understand... because I was thinking a 700 would wake it up a little

@MichaelWilliams-wo7yw 2 года назад

Where have been good if you cranked the engine so we can see how it runs and sounds.

@v8felon 2 года назад

What no new fuel pump!

@AndyFromm 2 года назад

Nice build

@travishall67 2 года назад

I've only watched the first half of the video so far but I'm confused by the title saying they are improving the BOTTOM end.

@rrmike19 2 года назад

I saw that too. That has to be a mistake

@travishall67 2 года назад

@@bigboreracing356 hahaha! No.

@travishall67 2 года назад

@@bigboreracing356 hahaha! Wrong again, Batman.

@markmccarty9793 7 месяцев назад

A 106° centerline isnt a cam for a heavy vehicle like a truck!!

@scoutsapp5624 2 года назад

AH YEAH! Another 351w!

@markmccarty9793 9 месяцев назад

Na, you can get 400hp out of a 351w with bolt on parts, at the crank! Heads, cam, and intake, just like any other engine! Start with heads and intake. Then cam and carb! Ran cheap Windsors for years! You cam get 400hp at the crank with a 306, for a while!😂😂

@christopherflynn5359 2 года назад

They ain't all there are they.

@imranabbasi7871 2 года назад

Good luck 👍

@txnetcop 2 года назад

Funny dumbass I owned a 351 Cleveland in a 72 Cougar that made 404 Horsepower dyno'd and I didn't have to spend a fortune.

@KingJT80 2 года назад

Cool story bro

@txnetcop 2 года назад

@@KingJT80 Thank you...don't why the guy ar power nation said that. I have several friends that love the surprising power output of the 351C!

@KingJT80 2 года назад

@@txnetcop well this is a Windsor So you know that Windsor and your Cleveland are different animals. 351Cs are baddass

@txnetcop 2 года назад

@@KingJT80 True but Windsor can easily be converted to produce 400 hp, the torque won't be as high but HP will reach it

@brandonbell3089 2 года назад

They all can make power. A engine is a air pump

@robertjones6971 2 года назад

Title of video is " improving bottom end ". Guess they don't know which end is up or down. 😜😜😜😜😜

@OzarksWildman 2 года назад

What’s the point of degreeing a cam when using non-adjustable cam drive? You’re going to tune for max power regardless of the timing location right?

@rileyk99 2 года назад

Verifying the specs I'd imagine.

@KingJT80 2 года назад

You should still know where its at and yes that chain can be adjusted some are pretty adjustable For education my guess

@ronniejohnson317 10 месяцев назад

They paid for advertising.

@cgarris8674 2 года назад

That short-block is worn out! A lot of work to just have to go in and do it again. The stock pistons are also 8.5 to 8.8 compression.

@brandonbell3089 2 года назад

I’ve ran wore the hell out blocks all of my life. It isn’t going to hurt a thing. A shim head gasket would bump the compression up

@cgarris8674 2 года назад

@@brandonbell3089 I've done the same before. The only thing it hurts is power :) - still runs fine though if you're on a budget; but you will sacrifice power, sometimes a lot!

@brandonbell3089 2 года назад

@@cgarris8674 no you won’t sacrifice a whole lot

@cgarris8674 2 года назад

@@brandonbell3089 On the dyno they only made 245rwhp LOL. That kit makes 412 to 420 crank on a fresh short-block which would be around 320rwhp. So they ONLY sacrificed 70hp by not rebuilding LOL.

@tonytate2964 Год назад

60cc chambers not 76cc

@robertjones6971 2 года назад

An "LS" is just as bad as a Ford.🤘

@brentwinkelman1990 2 года назад

Soooo they doing the top or bottom end lol

@supersportimpalass 2 года назад

You didn’t even check the pushrod lengths wtf???

@abefroman4953 2 года назад

Not every company would take a chance by hiring a dwarf. Hats off to PowerNation for giving Jeremy a shot!

@gregbrightwell4682 2 года назад

Good God, Man!

@abefroman4953 2 года назад

@@gregbrightwell4682 What? I'm ecstatic that he's gainfully employed.

@gregbrightwell4682 2 года назад

@@abefroman4953 🤣🤣

@joefreeman9733 2 года назад

I would be surprised if you got 400hp at the crank with that compression ratio those parts and that particular Ford engine. Which may be why we didn't see any dyno numbers. The 351 Windsor is a reliable enough light truck or base car engine in it's day. Getting one to make a bunch of hp is difficult BECAUSE among other things the bottom end. And the top end. What your bujld may have accomplished is possibly 325 hp at the crank and around 250 260 at the wheels. Almost ANY other small block engine in this displacement range makes more power easier than the 351Windsor . Frankly I'd rather start with a 300 Cid inclined 6 Ford . Or a stroker 302 Windsor . Or a 351 Cleveland 2 or 4 bbl engine. Or a SBC OR a 360 Chrysler. Or a 360 FE OR 352 FE.

@danmallery9142 2 года назад

You must have had some bad experiences with 351s. I think 375-400 is a reasonable goal with setup. They aren't going for max hp here anyway. Seems like they are going for something more streetable. Also, you haven't seen dyno runs because they haven't gotten to that point in the series yet. Making power with a 351 is easy because the stock heads are so bad a top end with a reasonable cam makes a ton more power than stock. Heck, check out Richard Holdner's junk yard dyno runs. He pulled a junkyard 351 and put on heads, cam, intake and made over 450. His cam was a lot wilder and I think it might have been a roller but probably wasn't worth 50 HP. Funny you mentioned you would rather do a stroked 302. A 302 is essentially a higher deck height 351 with a much weaker block so whatever shortcomings a 351 has, a 302 has them and the bottom end can handle about 250 less HP.

@jamesmedina2062 8 месяцев назад

@@danmallery9142302 is lower deck not higher deck

@blakebusbee9699 2 года назад

WaYa Say Power nation ( BEER CHUG WATCHING NASCAR ON FOX )

@markgaspar8390 2 года назад

Mfs never had a 351 cleveland🤣

@brandonbell3089 2 года назад

😂😂. The clevland is a good engine but it’s not all that 😂. The truck had a Windsor so they built it 🤷

@paladin0654 2 года назад

I'm done.

@blackbutmild1 2 года назад

$12k...?

@youngblood2 9 месяцев назад

I predict that it's going to start burning oil, after you bolt on fresh heads.

@brianclifford5881 Год назад

Yeah I never throw a Chevy engine in a Ford

@ascaniboy 2 года назад

Dyno?

@josephshehan4969 3 месяца назад

You can make power with fords . no need to go to that chevy Ls stuff!:)))😮 i had a 351 W in a car i had and it had. CJ HEADS AND MANIFOLD i guess you guys don't know about fords power mixtures they did in the 70s??😊

@JoedolfShitler 2 года назад

polishing a turd

@montgomery6104 2 года назад

👍👍🇺🇲

@garytarpley3771 2 года назад

You start out with simple goal- then produce a moon- shot expensive product.Expenses May be not an issue for your production company; the real world operates on a budget. This is pure fantasy/ with a misleading introduction.

@KingJT80 2 года назад

A top end isn't that much comparatively. Just buy it piece by piece if you're strapped for cash

@aroundlinemen 2 года назад

Ford🏁🇺🇸

@joefergerson5243 2 года назад

Stop the blasphemy! Ford rocks! 🤣🤣🤣🤣🤟🤟🤟

@brandonbell3089 2 года назад

Only built tuff with Chevrolet stuff 😉

@98grand5point9 2 года назад

I'd rather have a pedal car than an "loser solution" engine.

@justintaylor9458 2 года назад

Quickest I ever replied.

@scootering_for_life7282 2 года назад

3rd hear

@dewightkey6975 2 года назад

No that's not a good idea you can make all the power you need if you are a ford man if you are Chevrolet man stay away you have no idea how to make a ford run boys rebuild that engine all the way don't half ass it l.d.k.

@Johnshaft1970 2 года назад

Truth !!!!!!!!!!!!

@brandonbell3089 2 года назад

Not everyone likes to spend more money on a Windsor to make less power 😂😂

@brandonbell3089 2 года назад

A engine is a air pump. Obviously they all can make power 😅🤣. You don’t have a be a Ford guy to make power with one. But you do have to spend more money on a ford engine