Drilling & Tapping 1/64 Scale Cars | The Tools Needed | EASY DIY 

Thank You. You did answer my question about drill and tap. And the Cool thing is You were short, Precise and Informative ! 💀🏴‍☠️🏴‍☠️🏴‍☠️🏴‍☠️ Rrrrrrrrrrr !! R !

Cool video bro! Thanks. Learned the essentials for sure!

Thank you sir. 😊

I'm with ya. I like the button heads too!

Thanks for sharing this.

Very Informative, Thanks

Very good refreshment course.....Keep up the good work.

i would highly recommend staying away from the cheaper 3 and 4 flute taps , they break much too easy ,,, 2 flute plug taps are ideal, much stronger and push the chips up thru the flutes much better as well.

Great video.... Thank you 👍🏻

I've used button heads and standards, I like both. I am still have the occasional problem getting screws to start after tapping. I use a #50 bit for the pilot hole and 2-56 tap but its been hit or miss with screws..I need to clean the holes better I guess and see if thats the problem. The tap i use is for starting threads. I didn't know there were 3 different types of taps. One for starting, one for through holes and one thats not tapered on the end..Im gonna check out that tap you are using if I can't get the screws to start doing what they are supposed to do, everytime..Thanks for sharing

Nice and Thx ☺

Hey Royce, do you have an E-bay links for these? taps and screws? Thanks for your vids!

Do you have a link for the button head screws? Can’t seem to find them online. Thanks!

Just subscribed....thought I had already done so. Apparently not lol

In test fitting a screw, the hex head stripped out. Any way to remove it aside from trying to find a micro screw extractor?

Can you give me a link to buu the screws??

Is there any reason why use the eighth inch screw instead of the 3/16

How you doing bud. M thg old phone died so now with this new one I lost all of my accounts. I resubscribed to ya!

Update : The 1/8 are Good for the Bed of Pickups . Or Buy 1/4 and Cut .

ok I have a similar set of taps and drill bits but I'm always snapping them off in cars what am I doing wrong?

Question - What size is that Allen wrench?

I see other restorer's use a lubricant, either a light oil or beeswax, is there a reason you do not?

I Think the 1/8" long are too small, ordered them and they won't work on all Cars . I'm Ordering 3/16" ! So If You're going to Order one Size Get 3/16" long ! You'll be Happy You Did !

Suggest hot wheels Mattel to change its policy, to use newly easy-could be-opened screw-out method, so we fans could easily screw out the nails, instead of using too many dangerous drilling s and related methods to repair a car or clean something! 30 % of my whole hot wheels now was invaded by bed bugs, many of cars the windscreen and the cabin was disguising bed bugs inside, bad smells and ugly corpse. Since I travelled by the way backpacker to Langkawi n Kuala L bumper in 2009 2010. I got unconsciously the bed bugs attached to my whole backpack. Disaster!!!

Interested in doing some wheelswaps for me?