DW One Touch Clutch 

Thanks man, I miss that room at times.

It’s a freaking killer kit.

It's just awesome isn't it.

Great drum and your tuning is spot on which makes it sound so good.

I AM DRUMMER You’ve got sick time!!

@@IAMDRUMMER It is killer! Maybe do a vid on the Black Iron?

They are simply delicious.

Thanks brother, always appreciate your feedback.

Glad you like them!

Anytime, hope I helped a little.

Steal away, it's one of the most overlooked piece of gear that every drummer owns.

What I love about DW is I never lose an of the felts.

The Remo/Gibraltar is even Quicker. Love mine.

@@musiqsoundsproductions I have the Remo too. It's great.

The kick is a 22x20 maple olive ash burl over exotic lacquer and the snare is the black iron.

Are you asking why you can just add or decrease foot pressure, one of the main reasons for using a clutch like this is to change the amount of tension on the top cymbal on the fly. The loser it is the more the top cymbal will move adding more wash and air movement between the hats.

This comment wins the internet. Thanks man.

Thank you, that snare is a the original DW collectors 14x5 bell brass (bronze actually).

@@IAMDRUMMER thank you!!!

This one has a little rubber sleeve that helps prevent key holing, I feel your pain though.

The hole isn't big enough, have you contacted the store or DW about the issue?

@@IAMDRUMMER No, lol. Day off Monday so that’s 1st on my list. Haven’t had time to practice other than a pad. I’m very happy with my new hat stand!!!!

Nice!

Did it fit?

Even I would like to know if it did.

You still need to take a hand off the stick so to speak to adjust any clutch but this one is a lot easier to do and control.

It has nothing to do with how tightly the two cymbals are held together. It's about how much space there is between the felts that hold the top cymbal. If the top cymbal is too loose in the clutch, there's a tactile click when you close/open it with your foot, caused by the delay between the top cymbal contacting the bottom cymbal, and the top felt pushing the top cymbal down tightly (backwards for open). If the top cymbal is too tight in the clutch, the cymbal is unable to move, which may affect the sound of the hi-hat in an undesirable way. In either scenario, foot pressure is useless to alleviate the problem. The first problem is most common, because the two nuts used to adjust how tightly the top cymbal is held can loosen over time. You don't really notice they're loose until you feel the click I described, and it can be very annoying to have to finish a song while the hi-hat is clicking like that. The second problem only happens because someone else messed with your clutch setting.

Sorry to disappoint Macgyver can’t please everybody.

Ummmmm....hmmmmm.

Sounds like most clutches could give you some form of issues if you have arthritis in the hands, it can be a real pain in the ass. Can you tell me how it's locking up at the top and bottom of the clutch?

Had the same issue with mine, it's so difficult to do anything with it. Once I managed to get the bottom screw off, I could not put it back on, and I can't to this day. In short unusable

Not overlay, pretty well balanced.

Turn it to loosen……and turn it to tighten.

@@IAMDRUMMER I found out why I couldn’t get it There was debris in the threads Take the o-ring off, remove the pins, clean the threads

BIG BAZZA How do you mean?

Haven't tried the REMO but this thing is pretty sweet, have you tried it?

You should go and try one, very very light.

I did eventually.

I AM DRUMMER I'm sorry man, I didn't mean to be a fuck like that. I just had an attitude and I can see obviously that you put effort into your videos. Please excuse me man.

No stress brother I know I waffle on a bit and get carried away talking to myself on camera :) Always need feedback, keeps the channel improving.

+I AM DRUMMER the solution is common sense and simple and not enough people do it. Write down what you want to say and stick to it! Don’t wing it and waste your audience’s time. Too many people do it and it’s really frustrating and it probably costs subscribers. What happened to being a professional. Concision. Learn it. Love it. Be awesome.

It’s a hi hat clutch, just like any other clutch you remove the bottom place the clutch on the cymbal the replace the threaded bottom. Wasn’t aware this would needed a tutorial.