Dyson Internal Hose Assembly Replacement - Easy Method

Подписаться 8 тыс.

Просмотров 9 тыс.

50% 1

Replacing the internal hose on the Dyson vacuum is actually fairly fast and easy. No significant tools are needed other than some Torx screw drivers and possibly something like needle nose pliers.
Tools and Equipment used:
Internal hose - amzn.to/3EdTgIh
Torx screw drivers - amzn.to/3qQVhXV
Needle nose pliers - amzn.to/3qLt4le
As an Amazon Associate I earn from qualifying purchases.
Disclaimer:
Due to factors beyond the control of DIYNorth, DIYNorth cannot guarantee against improper use or unauthorized modifications of this information. DIYNorth assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. DIYNorth recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of DIYNorth, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not DIYNorth.

Опубликовано:

19 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@tomscotttheolderone364 Месяц назад

Thanks! Your shortcut worked like a dream! It sure beats the heck out of the disassembly everyone else demonstrated. Like you said, pulling the old hose and installing the new one required some wiggling and pulling, but I was able to swap them pretty quickly.

@DIYNorth Месяц назад

Thanks for checking it out. Glad it helped.

@joelloeffler1218 10 месяцев назад

By far the best video on inner hose replacement. Took me less than 15 minutes put a new hose in. Thanks

@DIYNorth 10 месяцев назад

thanks for the feedback and for checking the video out.

@michaeldamico5152 28 дней назад

Thanks for doing whatever experimenting you did to figure out that the hose could be replaced much more easily. Like the other comments, I must have seen five or six videos that did the heart transplant method.

@DIYNorth 27 дней назад

If there is a lazier way to do something I'll find it

@ChrisGifford-md5zn 3 месяца назад

Best "how to" video ever! Simple to follow and all steps covered. Worked perfectly and done in less than 15 min. Not sure why Dyson won't supply this part in Canada, however had it shipped from the UK without any issues.

@DIYNorth 3 месяца назад

Glad you got it done. Thanks for checking out the video.

@arahn1047 9 месяцев назад

Wow thank you so much for making this video. Your method is so much easier than all the others I've watched. The first time I tried replacing this part, I did it the hard way and after getting the new piece in and reassembling it, the stupid little red tab broke before I even finished putting it all back together. I was beyond annoyed that I had to waste money ordering another part, ugh but I did. This time though I followed your method and it was a breeze getting it installed and back together! Thanks again

@DIYNorth 9 месяцев назад

Thanks for checking it out and for the feedback

@rizvisa1 20 дней назад

thank you for making it so sumple.. Was able to fix my DC41. Hardest part was finding the screw driver at home tjat would fit the star screw size 10

@DIYNorth 20 дней назад

Thanks for checking it out

@Spicysun604 8 месяцев назад

Thank you so much!!! Mine broke in the exact place and I just received my replacement hose today. Such easy instructions without having to remove a million screws and parts! Yay!!! (Loved hearing the familiar accent from a fellow Canadian too 🇨🇦)

@DIYNorth 8 месяцев назад

Thanks for checking it out. Glad it went well

@aliboojax6527 12 дней назад

worked for me, screws on the dc65 are a bit different but mostly the same. thanks

@DIYNorth 11 дней назад

Thanks for watching

@michaeldamico5152 26 дней назад

You may want to add what size and type of Torx Screwdrivers a person would need to do the disassembly. I saw in the first portion of your video that you showed the same Torx set I have, which starts at a size 9, but after experimenting with my vacuum, I discovered that a person really needs to go to a small size T8 for some of the screws. AND, it can't be a T8 Bit; it has to be a T8 screwdriver so it can reach down into those recessed holes. You later switched to using a Torx Screwdriver that has a shaft long enough to reach down into the countersunk screws.

@DIYNorth 25 дней назад

Yeah you need some abnormal sized screw drivers to pull the vacuum apart. I actually find a lot of appliances use odd size or proprietary hardware that makes life hard.

@garyfunderburk1281 9 месяцев назад

Omg so much easier than the other videos. You are the man.

@DIYNorth 9 месяцев назад

Thanks for checking it out

@cal-native 8 месяцев назад

What a useful video! I had also seen some of the other videos and it was a bit intimidating. Your method was straightforward and took less than 30 minutes! Thanks for saving me a lot of time and anxiety 👍😉.

@DIYNorth 8 месяцев назад

Thanks for checking it out. Hopefully your Dyson sucks in a good way

@AlexanderRodriguez-ni4kt 3 месяца назад

Yes, it works

@DIYNorth 3 месяца назад

Sweet

@robin073412 3 месяца назад

Best video on this topic!!

@DIYNorth 3 месяца назад

Thanks for checking it out.

@bookey27 5 месяцев назад

Thanks, because I was trying to figure out a way. How not to remove all of that other stuff.

@DIYNorth 5 месяцев назад

No problem thanks for watching

@tinawilson7189 7 месяцев назад

What size is that first screw that you took off (inside the red tab?)

@DIYNorth 7 месяцев назад

Sorry, i have no idea. It's tiny.

@certifiable3992 10 месяцев назад

Nice alternate way to install this piece without so much disassembly. Does your way have any chance of snagging, cutting or abrading the new hose as you wrangle it into place? At 5:35 in your video, think of adding a zip tie in a vertically oriented loop to reinforce the snap in connection so that it doesn't rely so much on the red tab and tiny screw to hold it in place. I have had my DC65 Animal Complete since 2014.

@DIYNorth 10 месяцев назад

I think the hose should be fine. you would really have to be aggressive with it to damage it putting it in this way.

@MaximumDIYGarage Год назад

Great DIY project as always! Thank you for sharing my friend!!! How is Dyson reliability overall? How long have you had it? Do you recommend to invest into is vs one time use dirt devils and shark brand vacuums?

@DIYNorth Год назад

I think that I've had it for 8 years now. I'd buy another one. This little piece of plastic is the only thing that has broken.