Just got a mk3 supra but didnt want to pay over 400$s to get sequential turning signals for the front corners. I definitely use this vid as an example and make my own with these. thank you very much!
When ordering the panels of Corso Motion led boards I see that they come in a few different configurations (7x2 7x6 etc) can these be snapped apart to make your own sizes? Like taking a 7x6 and making it into multiple 4x2? And do they have resistors pre wired? Thanks for your time, Chris.
Isn't there color diffuser required for rgb leds? But that will reduce efficiency and visibility in sunlight due to insufficient intensity (should be at least 3500mcd), so the only option is to put up with green and red color fringing effect which will confuse other road users since flashing green is reserved for voluntary ambulance.
Isn't there color diffuser required for rgb leds? But that will reduce efficiency and visibility in sunlight due to insufficient intensity (should be at least 3500mcd), so the only option is to put up with green and red color fringing effect which will confuse other road users since flashing green is reserved for voluntary ambulance.
Hi, can I ask you a question. I'm thiking to upgrade a taillight LED for lexus RX350L 2018. But in America, the taillight flash only.. so is there anyway to bake it then adjust to make it sequential ( lexus in Asia or Europe they all make sequential for their taillight, except America).
So what products did you end up using for these? Looking to do something almost identical to my miata turn signals. Just simple “pew pew” lights with thicker leds to fill the lens.
Hi so you use the power from the turn signal to power the sequential module? As the power from the turn signal is always on/off repeatedly until turned off I can't see how the module stays powered up.
@FlyRide I actually wrote contRact (easily mistaken with the wors contact 😃 ). It is in the description of that video. The link is: www.flyryde.com/pages/contract
I think it’s safe to say that when I updated to my new site a few months ago, a ton of my description info was broken 😂. It’ll all be updated hopefully soon 👌 Here you go: www.flyryde.com/pl/85904
Nice video, question tho. To me the high beam seems to be a reflector bowl (I could be wrong, but judging by video) I was always told Led in reflector housings are bad. Is this true, or not?
You heard half of the info. If you have reflector LOW BEAMS, it’s not good to upgrade to LED or HID bulbs because light will scatter into undesirable locations, which can be dangerous to you and other drivers blinded by the glare. High beams just need to be brightAF, period. So if your high beams are reflector and you add LED, that’s totally fine. As long as it produces more light than stock (many LED bulbs DO NOT). There’s no worry about other drivers, since they are highbeam, but I will say that HID high beams suck because they’re not instantly at full power, which means you cannot “flash your brights” unless you have halogen or LED bulbs, which are instant.
Hi so I have a 1967 shelby mustang the long taillights . What do you think would be the best option for sequential leds that are cheaper? I can do it my self the led kit is almost 300$ which is ridiculous for just a 3 step . Problem is the break light running light and turn signals are the same any help would be appreciated
Saleian02 can you possibly ask the same question a different way? Thermal paste is generally used to create a non permanent bond between a component and a heat sink. You said “thermal paste heat method” as though it’s some sort of known technique? As far as thermal paste and LEDs, again, not really something that comes into play on LEDs that are soldered to circuit boards with no need for a heat sink. Some crazy LEDs though do definitely need help cooling, so I’m sure there are much less practical applications that would possibly benefit from thermal paste? Not really my lane to be honest.
2 trips to San Diego in 1 week compared to maybe 2 trips in one year is a big difference. When you aren’t paying a ton of money for a shop and overhead I guess you can just pick up and go film fun stuff!
Question: do you know of a way to use led bulbs for drl/high beams? I have my drl fuse pulled bc the led bulbs flicker and don't look right. Stock was halogen
mazdaspeed 3s are usually in bad shape. either they look like shit and barely run or you find one over 100k miles and the timing chain and turbo seals are done. ):