Easy Install Tailgate Pillar Lights for 4Runner

Подписаться 4,3 тыс.

Просмотров 7 тыс.

50% 1

Welcome to our step-by-step guide on installing a rear tailgate pillar light on your Toyota 4Runner! In this tutorial, we'll walk you through the process to enhance visibility and style. From gathering the necessary tools to wiring and mounting, we've got you covered. Subscribe for more automotive DIY tips and tricks!
USE “PL7P” for 7% off and Free Shipping
4Runner Tailgate Pillar Light
cartrimhome.com/Tailgate-Pill...
Toyota 4Runner Build List:
IRONMAN RAID FRONT WINCH BUMPER KIT
ironman4x4america.com/raid-fr...
IRONMAN 9500LB WINCH
ironman4x4america.com/monster...
GTR CARBIDE LED HEADLIGHTS
amzn.to/3syaJbY
3M SUNFLOWER YELLOW GLOSSY WRAP 2080
amzn.to/44wHWC0
PRINSU ROOF RACK
prinsu.com/product/t4r5-prins...
NITTO RIDGE GRAPPLERS
amzn.to/47SOVI9
ADVAN RACING WHEELS
www.kamispeed.com/products/ad...
KINGS 2.5 ADJUSTABLE SHOCKS
caliraisedoffroad.com/product...
TOTAL CHAOS UPPER CONTROL ARMS
www.chaosfab.com/product/2010...
TOTAL CHAOS LOWER CONTROL ARMS
www.chaosfab.com/product/2010...
C4 FULL SKID KIT
OUTGEAR SOLUTIONS SLIDERS
runnin4tacos.com/products/out...
DR KDSS BUSHING AND BILLET CLAMP
drkdss.com/products/kdss-fron...
SUMO BUMPSTOPS
amzn.to/3R2BDTm
DR KDSS REAR SPACER
drkdss.com/products/kdss-drop...
ACANII LED REAR TAILLIGHTS
amzn.to/47TiLfJ
CARTRIMHOME TAILGATE PILLAR LIGHTS
USE “PL7P” for 7% off and Free Shipping
cartrimhome.com/Tailgate-Pill...
ARK SPLASH MUD GUARD
arksplashguards.com/products/...
ARB DUAL COMPRESSOR
amzn.to/3PjNJWZ
RAM PHONE MOUNT
amzn.to/3PkU2d3
S-PODS SWITCH
amzn.to/3Pledra
These are Amazon Links for products that I have personally used. I am an affiliate and will earn commission on your purchase if you decide to purchase from Amazon. It will not affect your price in any way. Thanks for the support.

Авто/Мото

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@fezgon72 10 месяцев назад

This is way better than those other videos where they're drilling holes into the pillar, bunch of amateurs trying to cut corners, you guys are pros at it

@OtzleeExplains 10 месяцев назад

Appreciate you watching!

@rachaelpreston8976 22 дня назад

I agree. I started watching another install video, and cringed at their 'style' of drilling a bunch of holes so I came back here to save this video for future reference.

@seanmoran4385 7 месяцев назад

I have a 2019 SR5 and there was only 1 difference. I had to remove all 4 bolts from the spoiler, other than that the hardest part was running the wires through the rubber grommet inside the door. Great video!!! Helped out immensely and no drilling needed! Thank you!!

@OtzleeExplains 7 месяцев назад

Great! Glad this video helped you out! Appreciate you watching the video

@rhino4602 9 месяцев назад

Great tutorial video. I like how you guys fished the wire through the grommet and wire boot. Way cleaner and no drilling like the other install videos I’ve watched. I know there had to be a better install video out there.

@OtzleeExplains 9 месяцев назад

Thank you!

@dibari22 10 месяцев назад

So much better than all the other tutorials I've seen where they drill into the rear door. It's a little more work, but who wants to drill into their truck's body if you can avoid it?

@OtzleeExplains 10 месяцев назад

Thank you! I totally agree! Appreciate you checking out the channel

@Atlanta_Cyclist 11 месяцев назад

Okay, this has to be the coolest mod I’ve seen this year.

@OtzleeExplains 11 месяцев назад

Thanks bro!

@stevenwheat 7 месяцев назад

Yellow is so good on the 4runner😮

@OtzleeExplains 7 месяцев назад

Thanks bud!

@FightingNavyman 3 месяца назад

I wish it had a line of amber light for turn signals and then the red alone works as brake light but oh well can’t complain, still looks awesome I’m getting a pair for my 2022 4Runner 😄

@OtzleeExplains 3 месяца назад

That would be a cool idea. Hopefully someone does it

@spud6603 7 месяцев назад

Okay so update, I received my Tailgate pillar lights today. Honestly it is a great addition to my Limited and it took me 45 minutes to install "very simple." however I did end up breaking 2 of my clips because the bottom clip is reversed on the Limiteds so you have to pop it out with the housing then slide the plastic piece up and out Or order new ones incase one breaks. I do wish the passenger right light's cord was longer. Other than that it's a great look.

@OtzleeExplains 7 месяцев назад

I agree. The passenger barely made it to the taillight. Sorry about your clips breaking but glad you got it done so quickly.

@playdixie 7 месяцев назад

I've had this video saved for a few months now. I had ordered this lights and installed with the wiring being a bit "unprofessional." Finally had a free day to redo it, and thank guys! It took a little while to redo the wiring, but got done. It's now nicely hidden. My only issues was running the wires through the grommet. PITA!!! I also had to remove the bolts from the spoiler, but it's not so bad. :)

@OtzleeExplains 7 месяцев назад

Glad you were able to find our video helpful! Merry Christmas!

@yourdailyblockchain 7 месяцев назад

Super cool - awesome install

@OtzleeExplains 7 месяцев назад

Thank you!

@joelmercado8248 10 месяцев назад

Awesome job, thank you!

@OtzleeExplains 10 месяцев назад

Thank you!

@armando1983ful 19 дней назад

I just got my pillars thank's for the video i going to do it.

@OtzleeExplains 18 дней назад

Awesome bud! Goodluck!

@armando1983ful 18 дней назад

Thank's for the video@@OtzleeExplains

@watdaheck808 3 месяца назад

Nice video. Did you have to extend the wiring at any point?

@OtzleeExplains 3 месяца назад

It was a tight run to the rear passenger taillight but I didn’t have to extend

@myevilninja1 8 месяцев назад

How did you disconnect the 4 small wires after testing to allow for easier wire routing afterwards?

@OtzleeExplains 8 месяцев назад

You can remove the wire afterwards from the plug to fish it through

@PapiChulo-yb6iu 11 месяцев назад

Now it looks like a Honda crv 😂😂😂😂

@UltraAtomic1 3 месяца назад

Where did you get the taillights I’ve been trying to look for some but a lot come with smoke lens and I don’t want a ticket

@OtzleeExplains 3 месяца назад

These were from Amazon. I believe there’s a link in description

@spud6603 7 месяцев назад

How did you disconnect the 4 small wires after testing to allow for easier wire routing afterwards and what tool did you use?

@OtzleeExplains 7 месяцев назад

I used a flathead and was able to disconnect

@spud6603 7 месяцев назад

@@OtzleeExplains Thank you.

@dmendence1 7 месяцев назад

Did you guys use a relay? I tried these with the stealth taillights, and it fried my diode in my brakes and killed my battery. The pillar lights are drawing too much power, so I can't use them anymore now that I got the diode and battery fixed.

@OtzleeExplains 7 месяцев назад

That’s weird. We had no issues and used no relays. Maybe the draw on the aftermarket diodes may be too much

@robertorivera8296 2 месяца назад

Did you have an extra long harness on the kit?

@OtzleeExplains 2 месяца назад

Nope, I used the wires that were included. It was definitely a tight run so make sure you run it the same way we did in the video, it barely made it to the rear passenger taillight

@danielbarsody9843 2 месяца назад

What year is this 4 runner. It looks like the fasteners to the pillar panels may be different unless I am seeing it wrong. I may have to take a look at mine and see if they are the same. Mine is a 2017 limited. I see people popping the panels off which I dont like. If all models slide then I am totally following this model

@OtzleeExplains 2 месяца назад

This 4runner is a 2015 Trail Edition. I'm not sure if there's a difference in the limited version, I believe they should be the same.

@danielbarsody9843 2 месяца назад

Do you by chance know the oem clip number? Or even a replacement clip just in case some snap?

@mackenziepappas2975 Месяц назад

Can it be done without taking off the spoiler?

@OtzleeExplains Месяц назад

It does need to be removed

@lvvelili 10 месяцев назад

Hello. Do you have interest in testing our Toyota 4 Runner product? If so, please reply to me.

@lalok9912 8 месяцев назад

where did you buy ypur taillights?

@OtzleeExplains 8 месяцев назад

It was from Amazon but it’s no longer available.

@xwhoopax 6 месяцев назад

LOL at the other videos of this where they're drilling holes into their hatch... wtf!?

@OtzleeExplains 6 месяцев назад

That’s what I’ve been told..

@rand0mGT 11 месяцев назад

Is this the simpsons 4Runner?

@OtzleeExplains 11 месяцев назад

Haha it could be. Or a taxi

@OSAbsolam 5 месяцев назад

Nice job. But I dont care for this look.

@OtzleeExplains 5 месяцев назад

Fair enough!

@MurphysLawSD 2 месяца назад

This wasn't very helpful. You have to take off all 4 bolts! You don't have to use a coat hanger to fish through either. As a woman I found my way better and simpler. I've worked on my own car for years now. Should also be noted that every year of the 4runner is a little different.

@OtzleeExplains 2 месяца назад

That’s great, you should make a tutorial for others. Folks would love to see a women’s perspective in this.

@armando1983ful 19 дней назад

😮