EF Civic B-Series swap, Engine is ready to go in!

Подписаться 1,5 тыс.

Просмотров 2,7 тыс.

50% 1

Please feel free to drop a like, comment on the video and hit that subscribe button! Thanks for watching!
Please check out my other channel:
/ helpinghandautorepair
#efcivic #efsedan #b18 #vtec #civic #swap #engineswap #integra #crx #bseries #hondacivic

Опубликовано:

23 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@AaronStrong Год назад

We need a swap masterclass please 👏

@Knownworldwide Год назад

Lol. Maybe in the future. Hey thanks for checking me out bro. Really appreciate the support!

@thefearonshop 5 месяцев назад

Soooo Booooom Sedan gang 💪🏽👊🏽

@Knownworldwide 5 месяцев назад

💪🏾

@dionicioortiz6788 Год назад

Looks solid !

@Knownworldwide Год назад

Thanks man!

@civicstar982 Год назад

Take that front torsion bar off they make an after market one with no bracket will Give you hella space

@Knownworldwide Год назад

Yeah I plan on running an Innovative front traction bar in the future. For now it clears just fine.

@juancastillo111 Год назад

Get it and. Don’t forget front torque mount they make also

@Knownworldwide Год назад

@@juancastillo111 thanks!

@kenlee8176 Год назад

Keep us posted on the progress

@Knownworldwide Год назад

I have posted other videos. Definitely check them out when you get a chance. Thanks for your support!

@frias2287 Год назад

Nice one bro👍💯🤝💪

@LoganDidItYT Год назад

Great… now I want a Honda.

@Knownworldwide Год назад

Do it!

@dimlight85 9 месяцев назад

What size bolts did you get for the rear bracket? This is actually one of the first b-swap videos I've found that shows how this thing goes in and what it actually bolts to, so thanks for that! I have the correct bracket and the Innovation motor mounts, just don't know the correct bolt sizes.

@Knownworldwide 9 месяцев назад

The two bigger 19mm bolts I believe are M14x1.5mm As far as the length to get, you would need to just try and measure what might fit. I tossed the packages awhile ago so I don’t remember how long that bolt was. The one 17mm bolt that goes up top should be a M12x1.25mm Again don’t remember the length but hopefully this helps you some. Thanks for watching the video bro. Hope you decide to stick around.

@marcozuniga8163 Год назад

Is the jack you used a 1ton or 2ton jack. I just tried dropping in my engine but my harbor freight 1ton maxed out way lower than it needs to be.i just redid all the front suspension so the car is on jack stands

@Knownworldwide Год назад

Honestly it’s my neighbors engine hoist. Assume you’re referring to that. I think his is a 1-1/2 ton hoist. Worked great. I have used it with his LS (chevy) engine as well.

@marcozuniga8163 Год назад

@@Knownworldwide I see, thanks. I might have to rent one or just buy a bigger one. I tried dropping my b16 about 30min ago. It was about 8in short from clearing the front t-bracket. I had the hoist set for 1ton. Did you have it any different?

@Knownworldwide Год назад

@@marcozuniga8163 I think it’s set the same. Just unbolt the t bar. That should give you the clearance (assuming height you need) you need to get it in there. Or just lower the car down some on the jackstands and try it again.

@marcozuniga8163 Год назад

@@Knownworldwide option 1 it is, I already had the front end assembled minus the bumper so I was hoping there was something I was missing so I wouldn't have disassemble all that. I'm going to remove the tbar and latch wire out the way and get it in that way hopefully. Appreciate the response.

@marcozuniga8163 Год назад

@@Knownworldwide what's up bro, after the 4th attempt I got the b16 in. I used a d series alternator pulley and got it lathe to fit the b16 alternator so I didn't have to bang my frame rail and I have about 1/2in between pulley and frame after install. Thanks for the help bro!