Emax Nanohawk Review and Setup Tips 

Hi Scott, great idea and will update my description with the props I am using. Thanks! SLOG

Thanks Home Dronen FPV!! Wishing you and family the best for this coming year!!!

Hi Me Drone, Thank you for your kind words of encouragement! It does keep me motivated. Cheers, SLOG

Greatly appreciate the feedback! SLOG

Hi Victor, The theory behind this is going to the higher channels in a band provides more distance from WiFI 5GHz interference. For example, RaceBand channel 8 is 5.917 GHz. Nick Burns suggested this (IT Engineer) so I tried it and it seemed to help clean up the video with these little whoop class quads.

@@slogfpv5679 Thanks, thats interesting

@Kukuba008, Thanks for the feedback! On your list you might want to check out Joshua Bardwell's list: www.fpvknowitall.com/ultimate-fpv-shopping-list/ I would avoid the FrSKy ACCST Taranis QX7 as they have broken backward compatibility with D8 mode. A much better choice would be the Radiomaster TX16S which has a multi protocol module that binds with a lot of different protocols. The Jumper T-Lite is good if your on a budget. Lastly, if you plan on staying in the hobby you might want to go with a mid-tier set of googles like the EV200Ds. SLOG

​@@slogfpv5679 Thanks a lot. I will definitely change my ratio and goggles to TX16 and EV200D. But im still not sure, if i can connect any drone with any goggles ? Sorry i couldnt find much stuff about it and im now to this. Thanks.

@@kukuba0087, Narrowing your question to FPV drones (first person view), there are 3 main protocols, Analog, Digital (DJI) and Digital (Shark Byte). The thing that is nice about Analog is any Analog FPV goggles will be compatible with Analog FPV drones. However, they will not be compatible with the DJI Digital FPV System or Shark Byte. With Shark Byte, you can attach a Shark Byte Adapter to your analog goggles. If you want to use DJI, your best option (expensive), is to get the DJI goggles and add an analog adapter. With Digital you get a better HD video feed. See my review of the BDI Digidapter: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-u36wZWvdADU.html

@@slogfpv5679 Ohh like that. Thanks a lot.

Hi William, I appreciate the feedback and agree with your comments. I think next I am going to load Emu Flight on this little guy with the "Project Mockingbird" tune.

@@slogfpv5679 ohhhhh. I would LOVE to here how that goes for you. I've been thinking about the same thing, but wasn't sure if the difference was going to be worth the effort. I have some three blade props from beta fpv coming in the mail tomorrow morning. I'll let you know how those go.

Hi Game Of Drones, Great idea. The edges on the connector are sharp and you don’t want to apply too much pressure on the side as it just makes it harder to separate the battery. Shrink tubing should help. Thanks, SLOG

Hi Slow Entropy, Since you are going for a heavier battery and connector, I would recommend NewBeeDrone AZI Quad or Tri-blade props. They are well balanced, have a lighter hub and are durable. As far as tune, the PIDs were already a little high so I would try the stock tune. Cheers, SLOG

Seems like you need to unlock your VTX if there is a channel you cannot get to. I show how to do this at 10:00 into the video. Here is a help link from Oscar Liang on VTX bands and channels:oscarliang.com/fpv-channels

@@slogfpv5679 oh I see i must have misunderstood that step i will do so right now and scan with my goggles! Thanks

New sub!

Hi FlyerTuck, Greatly appreciate the feedback and sub! SLOG