Ep 173 Replacing Our Rotten Planks On Our Old Wooden Boat

Подписаться 87 тыс.

Просмотров 71 тыс.

50% 1

Join RU-vid Members for early access to our videos, our next Episode is out NOW!
/ @shiphappensuk
Visit & Subscribe our 2nd channel - ‎ / @shiphappensadventures
You Me Mental Health - www.just-me-mental-health.com/
HOW TO SUPPORT US -
** Make a Donation - ko-fi.com/shiphappens
**Patreon - / shiphappens
**Our Merch Store - ship-happens-4.creator-spring...
** Amazon Wish List - www.amazon.co.uk/hz/wishlist/...
WHERE TO FOLLOW US -
**Facebook Group groups/27496...
** Facebook Page - / shiphappens1392
**Twitter - / shiphappens1392
**Instagram - / shiphappensuk
**Tiktok - @shiphappensUK
About Sarinda - ML1392
Wartime Activities
6/44 Operation Neptune Invasion of Normandy
149th ML Flotilla
ML1295, ML1309, ML1383, ML1387, ML1389, ML1391, ML1392, ML1393, ML1407, ML1409, ML1421. ML1422
6/6/44 Channel Marker at Gold Beach on D-Day
Distributing instructions in the assault anchorage after the first landings in Normandy (Gazette Date - 19/12/44)
6/3/45 Captured a German Biber Type midget submarine off Breskens in the Scheldt Estuary. Eleven Bibers had sortied that day. Four were found abandoned along the coast at North Beveland, Knocke, Domberg and Zeebrugge.
One was sunk by gunfire off Westkapelle on 8 March and five vanished.
Post War Fate
1946 Fast Despatch Boat = FDB73
10/47 HM Customs & Excise = Valiant
1967 Sold = Frol - Pejo
1974 =Sarinda (Charter work on Crinan Canal)
1980-91 Extensive conversion to luxury motor yacht
11/95 Base ported at Liverpool
#boatrestoration #offgrid #boatproject #woodenboatbuilding #boatproject #boatlife
#woodenboatbuilding #boat #ship #asmr #mentalhealth #tools #boatfails #ww2

Опубликовано:

2 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 263

@garyphillips7993 Месяц назад

It’s really interesting to note the way you’ve evolved your process in replacing the planks and frames. You’re getting very slick and efficient these days 👍

@churchofthegreenflipflop2436 Месяц назад

I love the introduction - it is great to hear an overview of what you are currently working on. Makes the viewing experience so much more understandable. Brilliant!

@davidholloway6938 Месяц назад

I consider you a professional painter. You take more pride in in “paint you boat time”, and do a better job than any professional painter I have ever seen.

@graemeatkinson8411 Месяц назад

That 6pm Friday feeling, watching this dynamic duo work their magic❤

@RobertBlake-zd4cs Месяц назад

This episode brings it home what a back breaking never ending task this is. You both deserve recognition for your dedication and never say die attitude. Well done indeed. 👍🤔

@TheMrbazooka 29 дней назад

Top Job 🤘 It would be cool to see you melting down all the scrap copper nails and making something from it. Maybe something like a medal or little statue for the wheel house

@loki7441 27 дней назад

Gemma, If the phone rings and somebody asks for me. Just tell 'em I'm busy watching Ship Happens. 😄 You can sharpen the bolt cutters and adjust them to bring the jaws together real easy with the two bolts on the end of the jaws. It was a lovely day and poor Geema left looking out the window .🙁

@mikebills9343 Месяц назад

Your both getting quick now 👍🏻 Shipwright Simon and Gaffer Gemma 😂😂

@tmack1 Месяц назад

Always enjoy the three of you and your videos. Next, Holly's water intrusion issue, you allude that's it's rain water from the bow area. A cover would change the look of Holly which currently is inviting. So, another possible solution might be to isolate the bow bilge from the rest of the boat with some kind of small sealed bulkhead and put a bilge pump in the lower bow area to pump out the water.

@moreybandel5560 Месяц назад

Gemma, I love how you blurred out Simons crack! Lol! Making great progress! Thanks for the wonderful video! See you next week! Love from southeast Minnesota!

@user-cg2wy8gr4i Месяц назад

You two are amazing, when I see more rot, my hearts sinks, but you just get on with the job!!!!!

@TradeWithShawn Месяц назад

That jigsaw is a beast. My Ryobi 18V is older, and there is no way that it would go through 30mm of hard wood, not to mention single handed. Then add in holding up a ladder, pointing a camera and balancing over a mud bath. That's some next level skills.

@johnrobbo69 Месяц назад

Amazing work you 2, sorry if I left a bad smell in the cupboard when Si opened the door 🤷🏻

@ShipHappensUK Месяц назад

😅😅😅

@jamesa7506 Месяц назад

💩 🪰

@NUTTER8291 Месяц назад

I wonder how many people were expecting to find you back in there fella lol

@johnrimmer5955 Месяц назад

Robbo when did you escape ?

@terrybull1043 Месяц назад

Robbo didn’t they got him under the floor 😂

@bearbon2 Месяц назад

My stomach did a little flip when Simon got the nail in the knee. Ouch!

@Shintaro99 Месяц назад

I hope someday you will have charter rides on Sarinda, a 3 hour tour would be great! Thank you!

@dylanwebb9584 26 дней назад

Exceptional progress yet again - one plank at a time.

@rosschamberlain1823 Месяц назад

If I weren't unemployed, I'd definitely contribute to your efforts. You're both doing such a great job. I'm really glad I found this channel.

@superblackbirdrider Месяц назад

@@MevRB19yer here you are watching and commenting on their channel, contributing to their income.😂😂😂. What a knobjocky

@KennyP88 Месяц назад

Love the drone shot of Simon working.

@jeremytoms5163 Месяц назад

Silicone grease or spray in the glass channels should make them easier to open . Brilliant job so far, wish I had have your energy😅

@stevecam724 Месяц назад

Get the pations to sponsor Dry Ice Blasting all the windows, they will look brand new and you can seal the aluminium so it doesn't oxidise. Any company tha repairs aluminum car rims could do this for you and they would look and act like new.

@brianwinters4991 Месяц назад

I like how you blurred Simons bike rack .😀😀👏👏

@Davidcallard Месяц назад

You're doing an awesome job with what you started with, which was a rotten and rotting old boat. I thought Yaba and Tally Ho were over ambitious projects but on balance I think you two have had the biggest challenge. The aforementioned people, esp Yaba, took one horrified look at what they had, cried Oh Shit, and wisely I think, decided that all they had were templates for a total rebuild. Given your budget constraints that was never a practical way option for the Sarinda Project and instead you took the only option open to you which has been to make the most of what you started with, and I commend you both for your admirable fortitude and courage in your decision to commit to Sarinda. I wish you only fair winds and calm seas for the journey ahead.

@WimvdBrink Месяц назад

Great episode again, totally waiting for the deck beams and deck progress .. first everything looked rotten and bad, now its just looking up making me scared of the work that has to be done, but you two just continue and take on every step that needs to be done, and have a lot of fun also while doing it. Who said a couple shouldn't work together, you are the proof it can be done.

@buffplums Месяц назад

I think many would baulk at the scope of the task but you both just get on with it … amazing

@1BIGFROGGY Месяц назад

Can I suggest that you guys errect some scaffolding along side the boat (in the mud) which should make the job a lot easier particularly around the cabin areas.

@KennyP88 Месяц назад

I have so thoroughly enjoyed watching you both learn about boats, as you mentioned at the end of this video. You have passed the grade of newbees, into full on historic boat restoration crew on a budget. ❤

@stevejohnstonbaugh9171 Месяц назад

Ask Simon to build you a two legged scaffold that is just the right height for you to work comfortable on the beam shelf Gemma. I'm thinking along the lines of the tidal flat mud one legged table, One side has legs' and the outboard side has hooks that wrap over the appropriate stringer. One adjustable leg should do it but two would be better as the planes are always changing. Your poor legs must ache after hanging onto the side of the "cage" all day. :). What do you think? I'm certain the front handle can be removed from your belt sander so you can reach right up to the top of the beam shelf. Seems the handle is often stopping you short of a clean seep :)

@kevinlance1813 Месяц назад

It is a real pleasure to watch the restoration of this boat. I can't wait to see her headed down that creek and into open water under her own power. It really is quite a beauty.

@DEmma1972 Месяц назад

Good job on the boat. Seeing the boat spring open a couple of mm when you cut the beam shelf was a surprise but then seeing it ping back was more surprising lol

@nick.caffrey Месяц назад

What was that piece of music "Falling into you"? Who the singer? Beautiful music. (Oh, and tasty boat-building as well!) Lovely episode.

@planecrazy9208 Месяц назад

I just LOVE the enthusiasm and competence that shines through in every episode. I envy your skills and energy, and wish I had had the courage to do the same thing when I was young (old father time here ...) Good luck and Just Keep Going :)

@bengtkorswing5279 Месяц назад

I don´t write much but I am enjoying your videos. I love following your renovation work. I really look forward to the day Sirinda goes on her own power on a trip. Take care and God bless.

@ShipHappensUK Месяц назад

Thank you very much!

@vivanasperen3339 Месяц назад

Can’t wait for the deck to be done and interior living space to be started!!!!! You guys are so cute together.

@ShipHappensUK Месяц назад

Thank you! 🤗

@user-rn8ej6jh3k Месяц назад

My god you two are patient, really unbelivable. By now, most of us would've quit.

@karlpredmore1096 Месяц назад

You guys are a work in progress. Love laughing while watching you. Thanks a bunch.

@noelbowerman1562 Месяц назад

Great progress ,I'm thinking ,turpentine ,should take ,the sikaflex off ,so a damp rag when applying the sikaflex ,might make clean up and sanding a lot easier.

@dexterhawkins Месяц назад

At 1:22 and 1:29 when Simon cuts the beam shelf the boat springs to the right, its like the boat has "hogged" a little by loss of strength.

@phenogen8125 Месяц назад

Indeed; that tension release needs to be mitigated by inserting the correct original length of beam shelf and maybe ballast sagging to compensate when afloat otherwise will build in a twist and or hog. Ideally the tension should have been retained by temporary steel bracing being fitted and maintaining all the tension prior cutting so we only see a kerf cut and no additional widening of the cut. Hoping Simon duly notes this and resolves it. (connect all removed beam shelf and measure adding kerf widths to define original tensioned length of replacement)

@steveward60 Месяц назад

Always great videos I can sit back and watch you work and get dusty and covered in glue all day so interesting

@jeffreyoldham55 Месяц назад

Great transition shot from Simon, outside, to you, inside, Gemma! Twenty planks is a good solid days work on Sarinda, as well. 🤜💥🤛

@mikeskelly2356 Месяц назад

The Bolt Cutters can be made to close tighter by grinding down the 'Stopper' tangs located about 5cm below the lower hinges...Nice progress, looks even faster when several hours of grunt work are condensed down to half hour... 😲

@020Dutchy Месяц назад

You should have made a ladder you can hang outside from the deck, you know, the ones with the rounded (hook) tops and supports at the bottom to keep it spaced from the hull

@KennyP88 Месяц назад

I sometimes think you both are having WAY TOO MUCH FUN on this Sarinda project.❤❤❤

@EdSmith-wb6lx Месяц назад

Fantastic progress you guys are making, the template worked perfect Gema. You both have such a happy attitude you are an inspirational pair of happy people always smiling and upbeat. Sarinda is going to be as good as new when you finish and it looks as if you will meet you time deadline i bet the weather helped today, i wish i could send some of my sunshine to help you along. Stay safe. Ed 40 S of Vegas

@ussdrewstewart Месяц назад

re: Simon sticking his head in thru the portal window (@ 33:30)... with his hoodie on, he looks a bit like the Marty Feldman character in Young Frankenstein!

@MittenpunKt Месяц назад

Over the last 6 months or so it feels like you've gotten into a proper rhythm and made some amazing progress. Must be such a good feeling for you both 😊

@darlingms Месяц назад

Fantastic progress on this week's video. Well done 👏

@davidswain5687 Месяц назад

These are great videos❤. The content is repetitive, that's just the nature of the work, but it's the comic repartee between the two of you that keeps me coming back every week. (Listen to me with the big words 😂). Any hooooo, brill videos, keep em coming and I'll keep watching. All the best Dave Swain and family xx😊❤

@scottjones5221 Месяц назад

❤ Beautiful ❤

@KEIFabrication 29 дней назад

33:39 "Here's Johnny!"

@simonkelly2339 Месяц назад

There must be so many times where you say 'arr for F.. S…! 😂

@jamesfoulger2098 Месяц назад

Robbo has escaped the engine room cupboard 😲

@HYUKLDER1 Месяц назад

Bolt cutter’s gap. There is a screw bolt on the side usually with which you can adjust the amount of jaw gap with.

@martynbuzzing3327 Месяц назад

You guys are amazing. The work you are doing and the achievements you are gaining are truly eye-opening, and most times, with a smile. Well done.😊

@martinevans5587 Месяц назад

Please make yourself a push stick for the table saw! 😂 you need all your fingers

@user-ed3pg4wo3h 14 дней назад

great nicely you get a job in a boat yard now ty fab work . keep it up job you both it coming a long realty

@terrywilkins5266 Месяц назад

I admire your enthusiasm and energy.

@lawrencekaplan2755 Месяц назад

I am surprised your numbers are not higher. I have been watching you for several years now and find it always charming. What steps have you taken to boost watchers?

@TrapShooter68 Месяц назад

Finally, you use the belt sander! Now, all you need is a small, battery chainsaw for removing the beam shelf. Love this channel!!

@nigelwomersley403 Месяц назад

Amazing persistence, commitment and project management. Immense respect to you two for this work, I am sure people watching love the videos but have no idea how hard it all is to complete and stay focused and committed for so long

@nickcwizardscx Месяц назад

If you are still leaning, you should use your stabalisers😉

@philrogers1758 Месяц назад

I know 291 is called adhesive sealant but instead of using an actual wood glue like epoxy, PVA or PU expanding wood glue on bare timber is intriguing, I guess you've discussed this in a previous episode !

@Peter.w Месяц назад

The more progress you make, the less water ingress is happening great job!!

@susankimbal4304 Месяц назад

just a quick thought. as you cut each rotten plank, if you lay out the line with your bevel gauge/protractor, then every cut would end up the same angle, and so now you would only have to cut to length and width... less measuring and fiddling in the end...

@knutarneaakra6013 Месяц назад

You guys are totally bonkers and I just love it! Wish my wife was well ,not sick 😢 and we could do some of the tings you are doing .love this vlog been a follower from day one. Wish you all the best😊

@tracynichols7206 Месяц назад

Way to go ! You kicked ass this episode

@jenesisjones6706 Месяц назад

What a beautiful song!

@RobertLake-mf2qt Месяц назад

With what you are doing with lamination, the result is probably stronger than full size lumber. You are doing a fantastic job and you are wonderful to watch. All the best!

@davidelliott5843 Месяц назад

The boats were built with a layer of calico cloth between the two layers of planks. I can’t find any mention of the glues used, but the Sikaflex these guys are using will be resilient to movement and extremely strong

@RobertLake-mf2qt Месяц назад

@@MevRB19 I agree with you if that is all there is, an end butted joint. In this case, they are using adhesive that is stronger than wood AND the joint is overlapped AND the sides of the fitted piece is also given adhesive. In overall consideration, adhesives are used where original wood had none. For what they are doing and what they intend the boat to be, their work is acceptable and appropriate.

@johnmurphy3682 Месяц назад

amazing, how in gods name you stay so cheerful is beyond me.

@brian.7966 Месяц назад

I think its because they have each other, It cheers me to see it.

@keithchessun5085 Месяц назад

If screw holes are worn, you can fill the hole with glue covered toothpicks then you'll have fresh timber ti screw into.

@rhodaborrocks1654 Месяц назад

Great job you two, I love sitting back watching other people do the work !! Seriously though, you're amazing 🙂

@AndrewJackson-mf5qp Месяц назад

It's all coming together. What an epic build. That ship is going to stay together for a very long time with the amount of glue, that is going into it. I like that as I over engineer my projects too.

@chox2001 Месяц назад

It looks like a beutiful day there, I envy you guys. 18:22

@ehofman7636 29 дней назад

You to are incredible wonderful working together 👍👍

@robinday2392 Месяц назад

Fantastic episode as always and my god look.how far you've come recently with the build. Gemma and Simon you are honestly brilliant. X

@shelleyregnier6671 Месяц назад

Another fab Friday watching my Sarinda superheroes! Life is good.😃

@denniswray470 Месяц назад

Absolutely great to see the progress you are making you are getting so adept at replacing the rot on Serinda and smiling all the while

@redsteadyon Месяц назад

You two are ACE...🏴‍☠

@ricksmith4736 Месяц назад

A small air powered die grinder with a cutting wheel would cut those nails alot cleaner and quicker..

@dframeIII Месяц назад

I wonder if the two operable windows in the engine room were meant for heat management.

@phensriwood2093 Месяц назад

Just finished the fourth coat of paint on my boat”s hull. Two pack paint is excellent and expensive. S&S 34

@rolandtb3 Месяц назад

The repairs continue. Better weather some days. But the wind, cold, brr! A labor of love.

@lawrencejneuser8801 Месяц назад

I would have that nail puncture looked at because I had one grow to a giant mole, and it hurt twice as much after it healed up. You have a double layer of skin around your joints and your knees, and it's easy to puncture through which is actually worse then just cutting yourself.

@joeglenn1480 Месяц назад

Amazing steadfast professional work, truly inspiring what your accomplishing.

@tcin10asee2 Месяц назад

Thank you for always bringing a positive vibe with you. Helps my issues seem so much smaller. Love the channel!

@dadedubbledee Месяц назад

Yall did an amazing amount of progress. Great job

@philipjones9458 Месяц назад

Just watched your first vid didn't know you are campervan builders, wondered where you acquired your skills.

@tompena7487 Месяц назад

Thanks for marvelous vlog . Love watching

@tmack1 Месяц назад

The bulkhead moved when you cut the beam shelf!!! Is there some way you can check to see how much the boat is "hogging"???? Wooden boat tend to hog more than steel boats.

@charlescorris3469 Месяц назад

I enjoy watching the woodworking the most. You can really cut some good angles….

@adwood201 Месяц назад

Regarding the bolt cutters that have a gap, they are adjustable......

@stigrunetefke2157 Месяц назад

You 2 are doing a Awesome job, i love it :)

@nickviner1225 Месяц назад

If you rub a candle (wax) on your planer base and saw blades life will get very much easier.

@voneschenbachmusic Месяц назад

Beautiful worrk! It's been amazing to see the progress over the past few months!

@anoukWallenburg Месяц назад

Amazing how you guys keep on going.- I saw at section 17 there is a hole.. you can look outside.

@notwocdivad Месяц назад

I'm a sort of Silent Watcher, Watch a lot say very little! However after watching you both using electric tools so much I was a bit concerned about you getting VWF (Vibration White Finger) I used to rivet mining cages together and now suffer from VWF and it is no fun!! So May I suggest you both wear Anti vibration gloves? Thanks. Right you are both doing an amazing job on Sarinda and she is such a worthwhile candidate for rescuing!

@seansimpson7245 29 дней назад

Another great vlog guys , looking forward to the next 😀

@davidbrooker4613 Месяц назад

You two are doing great! Pink gloves and all😜

@SlowlySailing-lc1cs Месяц назад

And to think I've been whining about having a few worm-eaten planks and bits of rotten ply and one frame to deal with... I like your channel for a lot of reasons, but it really puts the scope of my project in perspective. But you two are an unbeatable team!!