Тёмный

ETHOS: A quick tour and look at how it works.. 

Painless360
Подписаться 172 тыс.
Просмотров 13 тыс.
50% 1

ethos.frsky-rc.com/
Link to the series: • ETHOS and FrSky X18S: ...
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingiverse.com/painless360
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/painless360.
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#ETHOS #FrSky #Overvew

Опубликовано:

 

1 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 54   
@kirbywilson5737
@kirbywilson5737 Год назад
i just bought the x18 I am loving it so far.i have had a few problems.thank for your vido on ethos
@baggszilla
@baggszilla Год назад
Looks good so far. Thanks
@MCsCreations
@MCsCreations Год назад
Pretty interesting system indeed, Lee! Great video! 😃 Stay safe there with your family! 🖖😊
@MrGirwin1123
@MrGirwin1123 Год назад
I got the xjt lite for my tandem x18. I was able to bind to my jumper receivers and ver1 frsky receivers. Yahoooooo
@UncleFesterUK
@UncleFesterUK Год назад
Great vid as usual :) throttle cut is there and simple to add, go to mixer tab, click and hold throttle tab, click edit, scroll to throttle cut tab and press it, choose active condition, normally i click SF switch once and move it back, then click return, until out of the menu and that's it set .
@Painless360
@Painless360 Год назад
My point is that they should be in the wizards. Videos showing setups of these ,missing pieces coming soon...
@Brian-om2hh
@Brian-om2hh Год назад
This looks like a good package. I may well look into one of these if a change radio brand next year. I'm not too far from T9 Hobbysport in Bradford, so I may go and take a look.....
@philiplewis957
@philiplewis957 Год назад
Now (as of mid August) the latest Ethos is .3.0 which did address a number of the points raised in this video (such as a pre programmed throttle cut), it was released last month so hopefully even more on the way shortly.
@Painless360
@Painless360 Год назад
Indeed, see notes in video and video description. I'm feeding back all of my findings and, so far, they appear to be listening...
@gerryherman7420
@gerryherman7420 Год назад
Thanks!
@joshmellon390
@joshmellon390 Год назад
Could you do a video about how to set up ELRS on this thing? I'm having a hard time figuring it out myself.
@trcjr4030
@trcjr4030 Год назад
Can u show how to setup voice call outs when changing a switch like low med and high rates
@Petriefied0246
@Petriefied0246 Год назад
I'd like to see one of these come with a "surface mode" because I also drive my RC cars with my x-lite.
@joethestack3894
@joethestack3894 Год назад
Looks nice. Does FrSky provide a user manual? Or do you have to learn it by watching youtube videos?
@Painless360
@Painless360 Год назад
No manual as such... Happy flying
@johnfaustus1
@johnfaustus1 Год назад
What would you say is the main benefit for ETHOS vs EdgeTX?
@Painless360
@Painless360 Год назад
Simplicity.
@malte9999
@malte9999 Год назад
The Ethos way of setting up models should be added to EdgeTX, as an option, when creating a model. Like a simple mode, that is similar to the Ethos workflow and an advanced mode where you get more or less what you have now. Then new users would have a much easier learning curve.
@Painless360
@Painless360 Год назад
That is what EdgeTX is looking at. See my video on it... happy flying!
@alwaysflying6540
@alwaysflying6540 6 месяцев назад
Do prefer this radio or the Radiomaster tx16s
@Painless360
@Painless360 6 месяцев назад
For me, I prefer the openness of the RadioMaster. But, ETHOS is very good at complex fixed wing setups.. Happy flying
@jeffatkins8103
@jeffatkins8103 Год назад
Being a new operating system, would this support INAV?
@Painless360
@Painless360 Год назад
Yes. Nothing special about an INAV radio setup.
@KramesTV
@KramesTV Год назад
hello, I just bought an x20s and on throttle I don’t have the weight / rate function… and I can’t setup the servo for my glow rc plane… what I am doing wrong???
@Painless360
@Painless360 Год назад
Probably nothing. ETHOS is still an evolving operating system. What is it that you need specifically? Using trims or curves may be the annswer...
@MrMartinRome
@MrMartinRome Год назад
Hi Lee, so this radio does not support FrSky's old protocols?
@Painless360
@Painless360 Год назад
No ACCST v1 support Internally. You can add an XJT module in the back. I struggle to understand why 3rd parties like the multiprotocol modules can offer this ability but Frsky themselves will not...
@MrMartinRome
@MrMartinRome Год назад
@@Painless360 If this radio had CRSF and ACCST compatibility I would consider it. No interest in its current configuration. Something you can feedback to FrSky. I do like their hardware, but not like this.
@Painless360
@Painless360 Год назад
Both are coming... I'll cover how soon. Stay tuned!
@VladTepes44
@VladTepes44 Год назад
Arming / motor disable switch should be standard on any RC build, Multi or Fixed wing. 🤔
@Painless360
@Painless360 Год назад
Agreed, so should questions for expo and some other stuff too. I hope they improve soon...
@enriquekramer4590
@enriquekramer4590 Год назад
Is there an easy way to set rates?
@Painless360
@Painless360 Год назад
That is a great idea for a quick video!
@winstonsmith7801
@winstonsmith7801 Год назад
How visible is the screen in sunlight ?
@Painless360
@Painless360 Год назад
Pretty good...
@winstonsmith7801
@winstonsmith7801 Год назад
@@Painless360 Nice to know , Thanks.
@blackbarett6632
@blackbarett6632 Год назад
Seems like a capable OS indeed! Sure hardcore OpenTX users won’t be impressed, but there are others as well..
@Painless360
@Painless360 Год назад
As most pilots that I know only use about 5-10% of OpenTX and EdgeTX (with quad pilots using a lot less) then most of the stuff the majority of pilots use is already here. For those who use more (LUA scripts, advanced setups, glider fixed wing mixes and nore) they are not here yet..
@blackbarett6632
@blackbarett6632 Год назад
@@Painless360 agreed! I only used OpenTX because it’s „the way to go“… Only thing I would miss is my INav LUA script 😅
@sarahdaviscc
@sarahdaviscc Год назад
Almost like early iOS vs early Android.
@4.094
@4.094 Год назад
If these model can display the flight will be perfect cause I don't like to where goggle.
@Painless360
@Painless360 Год назад
Can you explain a little more? It is not clear what you are asking...
@4.094
@4.094 Год назад
@@Painless360 i mean if it can be like dji smart controller with display
@Painless360
@Painless360 Год назад
Time will tell as at the moment it cant run the INAV LUA Script or show a live FPV feed.
@robertrouleau1000
@robertrouleau1000 Год назад
@@Painless360 the HD version can...
@jwtfpv8957
@jwtfpv8957 Год назад
I know it's heresy to say but EdgeTX/OpenTX is not for everyone.
@Painless360
@Painless360 Год назад
I have lots of pilot's (including a few Patreons) who couldn't get to grips with OpenTX or EdgeTX. No good if you cant use you new powerful radio. EdgeTX is working on making the interface easier to use but some just want to fly, not spend hours trying to setup a radio model. Happy flying!
@robertrouleau1000
@robertrouleau1000 Год назад
@@Painless360 Amen!!!
@nandakoryaaa
@nandakoryaaa Год назад
Making such screen is a total waste without having FPV monitor on it. I'm still waiting for something like TBS Tango to show up.
@Painless360
@Painless360 Год назад
Stay tuned... ;)
@philiplewis957
@philiplewis957 Год назад
Then you need to look at the X20S HD which has what you want.
@nandakoryaaa
@nandakoryaaa Год назад
@@philiplewis957 is it HD only?
@Painless360
@Painless360 Год назад
HDZero - www.frsky-rc.com/product/tandem-x20-hd/
Далее