Been two years of using Brother GTX Direct to Garment Printer. Me and my colleague sharing our experience together with some tips. FACEBOOK ‣ / amedion
So I purchased a used GTX and it has sat in my garage for 6 months. its completely empty with no ink. I went to plug it in and it will not power on. The temperature in my garage is maybe 40 degrees Fahrenheit. Can you help me with this problem, and where can I get a new usb card to install on the unit. Mine is damaged.
I had the same problem and I called a technician y told me to reduce that problem I had to enclose the underneath and I add a dehumidifier and in my case the temperature it was an issue as well so I added a little heather under there too and that stop the issue
Hello Idol can you share us your print setting for white and colored shirt.. settings of your Highlights and Mask saturation, Brightness, Contrast and cmyk for better resolution and detaild in printing.. thanks in advanced Idol!!
Im not getting any white to print. No white on test print. We did all cleaning of the parts. We did super clean. We did white ink circulation. Nothing.... any tips?
Hi, I'm also have that machine, did you always on that machine everyday? Sometimes I not using it on 2 weeks but I'm always running it for white ink circulation everyday, but I noticed my white ink decrease. It's seem wasted for me, eventhough I'm not using it... Any suggestions for saving white ink
No we don't switch it off cause we use them everyday. If you're not printing volume then this machine not suitable for you. It will run cleaning every 6hrs. Best is to switch it off if you're not using then but not for too long.
@@amedionteo , most of my clients and my work demand me to do silkscreen and microfiber, 😂 I already buy that dtg machine for further expand my business cause some silkscreen can't achieve dtg result. Did you using microfiber /jersey on dtg machine. Give some tips, cause my supplier not recommend me to dtg on microfiber /jersey
We dry the PT for a little over a minute with 160-170celcius.. Curing for 160celcius on 60s.. Depends on design and color of the hoodie. If red hoodie definitely need hovering.