Тёмный

F100 Crown Vic Front End Swap - Step by Step 

330_Garage
Подписаться 21 тыс.
Просмотров 540 тыс.
50% 1

I pull a crown vic front end out of the local pick n pull and swap it under the old 1969 F100. Use a Back Yard Customz kit to box the front frame and weld it all in place.
Front suspension can be used from the following vehicles: 2003-09 Crown Vic, Grand Marquis, or Lincoln town car. OR a 2003 -2011 crown vic police interceptor.
Links:
Back Yard Customz front swap kit:
www.ebay.com/itm/153877466834...
Eastwood Rust Encapsulator (Quart)
amzn.to/3bNKClV
Eastwood Rust Encapsulator (Rattle can)
amzn.to/3vi7Loo

Авто/Мото

Опубликовано:

 

4 апр 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 509   
@nathanhawkins4108
@nathanhawkins4108 2 месяца назад
We do this relieving in our shop, but not a lot of the crown Vic swaps. This has been one of the best videos I have found on the Internet for a little bit of instruction. Good job man.
@Pedroisanickname
@Pedroisanickname 4 года назад
New sub. I like your content for a reason you might not expect... NO LOUD MUSIC! Thank you for that. Cheers!
@fml5910
@fml5910 3 года назад
You mean no loud,stupid,annoying music?
@philliphutson7903
@philliphutson7903 Год назад
Even when the music is playing it's tolerable choices including the volume. Not to mention it's in the correct places.
@yamahaxs6501
@yamahaxs6501 3 года назад
being a c10 guy, all the Ford guys talk about the Crown Victoria swap, but I've never watched one till now. great content
@330_garage3
@330_garage3 3 года назад
Thanks! the nice part about the C10 now, is the aftermarket options for it. Parts are becoming available for the F100, but the crownvic is hard to beat for the low cost.
@dh2360
@dh2360 3 года назад
Amazing how versatile the Crown Vic platform has become in the hot rod market. From this truck mod to the entire drivetrain sitting under a 1969 General Lee or racing Vics at Freedom Factory race track. Pretty cool to see how creative hotrodders can be which makes this hobby that much more fun and interesting.
@johnk2126
@johnk2126 4 года назад
Man. Mine was way more than a weekend lol. Finally getting my engine back together and ready to run after 2 years
@RIPbiker13
@RIPbiker13 4 года назад
I was shocked when you said a weekend and thought I was just a slacker. Looks good, and to be honest, makes me feel better it took you a little longer haha.
@travisgreenhagen4657
@travisgreenhagen4657 4 года назад
Enjoying watching this build. You do a great job of explaining the issues and how you overcome them. Been a great learning resource. A pleasure to watch and thanks for sharing. Can’t wait to see how this truck finishes.
@bux49
@bux49 4 года назад
Old Fords Rock ! My first was a 46'. Now driving a 96'. I used to do everything by myself. 6 hernias later. Nice shop I had a 1 car garage to do everything.
@justinturner7502
@justinturner7502 4 года назад
Jesusdelivers.com demonbuster.com theministryofsalvation.com the full gospel is deliverance healing and salvation that's smart is a prayer Jude 1 and 2 Revelations 1 and 2. psalms 35 83 109... Please pray this out loud. It will make a HUGE difference in the world we live in. It would mean so much to me if you would pray this out loud today. If you have any questions about it, please feel free to comment and/or message me, and I’ll be happy to explain more. Thank you! 😁👍🙏 Spiritual Warfare Prayer Against Illuminati / New World Order (Ephesians 6:12) Scriptures referenced can be read at the bottom. BINDING THE STRONGMAN Father, in the Name of the Lord Jesus Christ, and the authority You have given us (Matt 16:19; Luke 10:19; Matt 18:18), we now bind the strongman (Luke 11:20-22) over all evil spirit powers working in and through the following: The Illuminati; Council of 13; The Rothchilds; The Rockefellers; The Bilderberg Group; Trilateral Commission; Council on Foreign Relations; Federal Reserve System; Internal Revenue Service; United Nations; Socialism; Humanism; Liberalism; Communism; Atheism; The Kremlin; Peking; Church of WICCA; All Satanist Churches; The Roman Catholic Church; The Vatican; Babylon; The Pope; Beast and False Prophet; Antichrist; Hospitals; Prisons; One World Government; International Monetary Fund; Witchcrafts and Zodiac Powers; World Council of Churches; Body of Christ; All True Churches; All Believers; Israel; and Jerusalem. And we break all the curses, vexes, hexes and spells over these people, places and institutions in the Name of Jesus Christ: The President, the Vice President, The Cabinet, All Senators & Representatives, Supreme Court, All Federal Judges, Family, Business, The Pentagon, State Department, All the States, Governors, State Legislatures, Counties, Cities, Home and Possessions. We bind all these evil spirit powers and loose the spirits of Burning, Destruction, Judgment and Confusion on them and loose Warrior Angels to attack and destroy them. We loose the ministering spirits of God on our loved ones, friends, country, business, etc. We loose the spirits of Adoption, Grace and Supplication, Truth, Peace, Love, Joy, Sound Mind, Praise, Worship, Prayer, Holiness, Obedience, Grace, Mercy, Conviction, Repentance, Deliverance and the Seven Spirits of God (Wisdom, Counsel, Might, Understanding, Knowledge, Fear of the Lord, Spirit of the Lord). Thank you, Father and Praise You, Father, in Jesus' mighty Name! Annihilating The Hosts of Hell Book II PG. pg 29 CIVIL WAR IN SATAN'S KINGDOM (Matt 12:22-32; Mark 3:20-30; Luke 11:14-23). In the Name of Jesus Christ, we command Satan's demons to fight against and destroy each other. Specifically, we command all marriage and family hindering, delaying, preventing, destroying and breaking demons to attack spirits of Ahab and Jezebel. We command the spirits of power and control to attack the spirits of pornography and Eros; the spirits of violence and torture to attack the spirits of human subjection, degradation and submission. Loose the spirits of riches and wealth by greed to attack the spirits of lust for one world rulership, currency, and total control of the world system; the spirits of anti-capitalism, rebellion against free enterprise, strike and work stoppage to attack the spirits of poverty, hatred for believers, anti- Americanism and human bondage. Let the spirits of war between the nations, destruction, hatred and anger attack the spirits of political and spiritual blindness, rage, mockery, vengeance, evil political science and influence, Illuminati and Communism. Let the spirits of antichrist, 666, and false religions attack the spirits of Roman Catholicism and Masonry, the spirits of infirmities, sicknesses, weaknesses, deformities, and accidents. Let them attack the spirits of alcohol, drugs nicotine, bad nutrition and abortion. Let them destroy the spirits of mind control and darkness and attack the spirits of Leviathan and pride. Father, we ask You to loose burning, judgment and destruction upon all disobedient and reluctant spirits that fail to follow these commands. Scriptures referenced: Ephesians 6:12, “For we are not fighting against flesh-and-blood enemies, but against evil rulers and authorities of the unseen world, against mighty powers in this dark world, and against evil spirits in the heavenly places.”Matthew 16:18-19, “Now I say to you that you are Peter (which means ‘rock’), and upon this rock I will build my church, and all the powers of hell will not conquer it. And I will give you the keys of the Kingdom of Heaven. Whatever you forbid on earth will be forbidden in heaven, and whatever you permit on earth will be permitted in heaven.” Luke 10:19, “I have given you the power to trample on snakes and scorpions and to defeat the power of your enemy Satan. Nothing can harm you.” Matthew 18:18 "Truly I tell you, whatever you bind on earth will be bound in heaven, and whatever you loose on earth will be loosed in heaven.” Luke 11:20-22, “But if I am casting out demons by the power of, it proves the kingdom of God has come near to you. When a strong man with all his weapons guards his home, all his belongings are safe: but when someone stronger than him attacks and overpowers, he strips him of his weapons and carries off his belongings.” Matthew 12:25-26, “Jesus knew their thoughts and replied, “Any kingdom divided by civil war is doomed. A town or family splintered by feuding will fall apart. And if Satan is casting out Satan, he is divided and fighting against himself. His own kingdom will not survive.” (These prayers are taken from a booklet which can be read online, called, “Win Worley Warfare Prayers,” which I included a link to below. In this booklet, even more scriptures are referenced, providing a scriptural basis for each warfare tactic used in the above prayers.) LISTEN DAILY PRAYERS THAT ROUT DEMONS & BREAK CURSES BY JOHN ECKHARDT NEW EDIT ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PIWKS0b_grk.html
@CuzznRickH14
@CuzznRickH14 3 года назад
I really like what you've done. Never seen that setup before. Very nice. Can't wait to see the finish.
@jamest4409
@jamest4409 4 года назад
Cool! Been waiting for you to upload something new lol. I’ve been working on my 72 and been using this channel for ideas. Good work!
@herbbennett2580
@herbbennett2580 4 года назад
Best I’ve seen. This took me two months!
@LarsonFamilyFarm-LLC
@LarsonFamilyFarm-LLC 4 года назад
That's a big project modification...looking good.
@brianhuffaker5811
@brianhuffaker5811 4 года назад
Hell yeah I just threw in the front end last weekend on a 71 still need to make the bushing mount and will be done!! Then on to installing the motor
@MrBigdee183
@MrBigdee183 4 года назад
This looks awesome! I wish this would have been around when I built my '72 thirty years ago. One thing I would have done different would have been to weld up the holes in the outside of the original frame rails were the old suspension rivets was. With them open, I would be afraid of water getting in between the frame rail and the BYC box and causing it to rust and creating a failure point. Great work though! I like it.
@courtneyhall7140
@courtneyhall7140 4 года назад
beautiful job, actually stronger than stock.clean,neat and highly though out.
@OnlyTheClark
@OnlyTheClark 4 года назад
Hey man, really enjoying the series. Great work, and thanks for sharing!
@danlabelle6210
@danlabelle6210 4 года назад
Can not wait to see the rest of the project awesome job man
@alfonsosalgado6352
@alfonsosalgado6352 4 года назад
that BYC makes the project alot easier. i did a crwn vic for my 56 f1 and i cut the frame square with tubes from the crown vic with ifs and did something similar to the frame on the 56. i just got the explorer rear end , like what u did in the last vid with that rear end. because of funds i will also have to bolt on the rear end till i can afford a 4 link. great vids keep them coming
4 года назад
Nice work on her, bro. I'll stay tuned for more.
@henrykiefer8316
@henrykiefer8316 3 года назад
The original front ends on these trucks are just fine !!
@330_garage3
@330_garage3 3 года назад
You must not have driven one in a while.. this truck drove horribly and was hard to keep on the road, even after replacing bushings etc.
@xmo552
@xmo552 3 года назад
My 56 f100 came a farmer's field. Everything was seized solid. The springs had been heated in the 70s to drop it. They were inverted and they weren't even from side to side and if you viewed from above they weren't parallel. I did this swap over 5 years ago. I agree The original suspension is fine. I wanted to keep it.
@michaelcanto6175
@michaelcanto6175 4 года назад
Going to be an interesting ride, Can't wait!
@carlwhite8225
@carlwhite8225 3 года назад
I have done 13 of these conversions on 67/68 Trucks and the first 2 I made my own Boxes but this BYC Kit is a time saver for sure
@lukecullett9044
@lukecullett9044 Год назад
Is it tho? Didn't look like they came welded at all. Just tacked
@4pezheads
@4pezheads 2 года назад
Hey! I’m an old guy just telling you how important eye protection is versus an eye patch! I was using my grinder like you, and have a melted, chipped and cracked area in my glasses! I bought them as safety RX glasses, but wow! Be careful! I want to see more of your work!
@yarkie1
@yarkie1 4 года назад
Great job! Having the right tools is half the battle!
@richardherbst8081
@richardherbst8081 4 года назад
So good to have you back!
@330_garage3
@330_garage3 4 года назад
Thanks!!
@markwoten6679
@markwoten6679 Год назад
I’d say you really surprised me. Great Job. I got my 79 F150 Styleside Custom down to the frame. Seen various videos with this crown Victoria suspension install.
@fazfinisher5598
@fazfinisher5598 4 года назад
Great stuff,look forward to the next update.
@ghostvenomgarage8793
@ghostvenomgarage8793 4 года назад
Man you do everything so clean and precise. Your videos are very educational and thorough!
@330_garage3
@330_garage3 3 года назад
Thanks! thats what I shoot for, something that I can share and you guys find helpful.
@m.o.m.manofmaranatha1584
@m.o.m.manofmaranatha1584 Год назад
@@330_garage3 what is it registered as? Crown vic or truc
@edwardpoff575
@edwardpoff575 4 года назад
So I have done 2 of these truck but never bought a kit. Didn’t know they were out there! Turned out nice man! Keep up the good work!
@makingsensewithsteve3620
@makingsensewithsteve3620 Год назад
I did mine with no kit. It was before kits were available. Finished it in a weekend. One thing I fail to understand is why everyone now seem to think the alignment pin is so important to keep. It is for the robot that loads the suspension in the car. Not to mention if you want to alter the wheelbase (I did) using this logic of the original holes in the frame does not work.
@edwardpoff575
@edwardpoff575 Год назад
@@makingsensewithsteve3620 yeah I agree.
@makingsensewithsteve3620
@makingsensewithsteve3620 Год назад
@@edwardpoff575 old school vs. new. Nothing wrong with new but it was us that made these kits available. We pioneered this swap. I also did the IRS swap using the kit from truckirs. I did my swaps in 2011. Generally speaking ford people build. GM people buy parts to make it happen. I do like seeing kits being made available. They can be used in trucks other than fords. Like I said. We are old school. The reason these kits exist. We showed them it could be done. I personally don't care for this particular kit. There are others out there that are better in my opinion but I tip my hat to him for documenting the process
@edwardpoff575
@edwardpoff575 Год назад
@@makingsensewithsteve3620 I agree 💯 %
@FIXR7
@FIXR7 4 года назад
Apart from the good job you do and the Ford FE subject, you've got my subscription simply because you haven't started every video with "What is going on guys???" not to mention the total lack of "Real quicks" and "Go aheads"
@iamrichrocker
@iamrichrocker 4 года назад
glad to see you active again..hope all is well with you and yours..stay healthy and pump out the videos..you are far from a backyard mechanic..peace..
@ervingoertzen7233
@ervingoertzen7233 4 года назад
I can’t wait to do exactly this . I really like the bumpside fords , but like the idea of making it a better driver, with better handling. I also want the Mustang irs setup too .
@nealpurdy1202
@nealpurdy1202 4 года назад
They sell a kit to swap the t-bird cougar mark viii irs into the f100s much more affordable to find than the mustang irs but alot of parts from new edge irs interchange!
@makingsensewithsteve3620
@makingsensewithsteve3620 Год назад
@@nealpurdy1202 The kit is from TruckIRS. I used it for my MN12 (Thunderbird) IRS swap. Be careful when shopping for the IRS. They came with 2 different center sections. You want the 8.8. When I did mine there was a bunch of people saying it would leave the rear sitting way lower than the CV front. I did my own homework and decided they were wrong. They indeed were wrong. I took 1/2 coil out of the rear springs to get geometry correct for the IRS and was still roughly 2" higher than the front. In fairness I put 1 1/2" drop springs in the front.
@danielkustra9071
@danielkustra9071 4 года назад
i knew people have done the Vic and Mustang front end swap i have an 83 i'd love to do a newer F150 front end swap. Good work dude
@endall6783
@endall6783 4 года назад
I've watched a lot of the swap vids and I have got to say yours is in the top 3 very nice job. The BYC kit does it have everything needed mount wise I've never heard of them it didn't look bad at all.
@waterheaterservices
@waterheaterservices 4 года назад
Hard working man. Respect.
@maxhammontree3169
@maxhammontree3169 2 года назад
Dude! This video just mad me decide to swap my from end. Great work!!
@AnthonySmith-uz3sf
@AnthonySmith-uz3sf 4 года назад
Saw this done on a 65. Used the whole frame from the copmobile. Nice & low.
@callmenortnortin467
@callmenortnortin467 4 года назад
Very nice project. Informative. Well done
@b.s.adventures9421
@b.s.adventures9421 2 года назад
So cool all the different styles of builds. Crown Vic clip to lower your truck. I want to mount my Lincoln mark vii on a twin beam truck frame to make a lifted desert runner car. Good work guys.
@johnneedy3164
@johnneedy3164 4 года назад
Interesting ,wish was still at it would do these, think they would sell ,glad to see there are still mechanic s out there not parts replacer
@michelboisvert5684
@michelboisvert5684 4 года назад
nice job you know what y're doing, beautiful
@ericjennings5041
@ericjennings5041 4 года назад
Nice clean work!
@slow5oh89
@slow5oh89 4 года назад
I was gonna buy a plasma cutter to cut out the crossmember as you did but I cheaped out and used 12” sawzall blades. Glad I did after seeing how long it took with the plasma cutter. Sawzall blades went through like a hot knife!
@Beandiptheredneck
@Beandiptheredneck 4 года назад
slow5oh89 sometimes I’ve found that a simple approach with basic tools is just as easy If not easier than using fancy stuff. Bet you didn’t need a 10 pound sledge hammer once your cut was done
@slow5oh89
@slow5oh89 4 года назад
OntarioRedneXXX That’s right, it just fell out
@UNITEDBYTRUCKS
@UNITEDBYTRUCKS 4 года назад
Digging the content, man! Keep it coming.
@connerhockey2540
@connerhockey2540 3 года назад
Dude I love your videos!
@morganleblanc730
@morganleblanc730 4 года назад
I really like your channel. You are doing an awesome job!
@330_garage3
@330_garage3 4 года назад
Glad you enjoy it!
@eduardojimenez7595
@eduardojimenez7595 5 месяцев назад
Great work man ❤
@DannyWalker1949
@DannyWalker1949 4 года назад
I Like this Kit❕ I used to cut out the old Mustang II front-ends and put them under old thirty model car's and truck's to make street rods out of them. This unit mounts quit-a-bit different then the Mustang II front-ends did. This is simpler. And, with the Steel Box was pre-made was Nice. Great Job also on this being installed, Buddy.👍🏽👍🏽
@chrisminter7776
@chrisminter7776 4 года назад
wow, great job!!
@francfurian8215
@francfurian8215 3 года назад
Love your work, nice & clear explanation Cheers😊
@330_garage3
@330_garage3 3 года назад
Thanks! glad its helpful!
@angelaracino6236
@angelaracino6236 4 года назад
Nice job my friend.
@kennethbrown5784
@kennethbrown5784 4 года назад
Crazy how easy the swap is
@gilliland426
@gilliland426 4 года назад
looks good... job well done.
@thomascorvin9032
@thomascorvin9032 2 месяца назад
Very nice welds by the way
@magnoliastreetproductions3076
@magnoliastreetproductions3076 3 года назад
Clear and Well done. Please do not skip the goggles, and safety equipment when called for.
@marianoandazola7142
@marianoandazola7142 10 месяцев назад
You did a great job 👌👌👌
@ezie911
@ezie911 4 года назад
My 79 f100 custom made me subscribe.
@davidjrcruzado93
@davidjrcruzado93 3 года назад
Awesome build! Subscribed! 🤘🏽🥃
@330_garage3
@330_garage3 3 года назад
Awesome! Thank you! - glad to see you guys enjoying it!
@mohsenpourghasem399
@mohsenpourghasem399 3 года назад
Great job man
@chrishunter8114
@chrishunter8114 4 года назад
Nice work!
@alopez3568
@alopez3568 4 года назад
Nice work 👍🏼
@robertcampbell9205
@robertcampbell9205 3 года назад
Great video. 👍
@markjeffels3327
@markjeffels3327 4 года назад
Thank you so much for posting! I plan on doing the same to my 58'!
@timesthree5757
@timesthree5757 3 года назад
Why? You destroying a beautiful piece of art. It's like painting a 747 onto the Mona Lisa. Stop buying these classics just to put modern crap on them.
@markjeffels3327
@markjeffels3327 3 года назад
@@timesthree5757 I see you're a purist, but putting in the Crown Vic Front End makes it safer on the roads.
@timesthree5757
@timesthree5757 3 года назад
@@markjeffels3327 oh I'm sorry I forgot about the fact than every f100 owners all of them just died driving f100 including my uncle. Oh, yea never happened. The f100 front ends are not dangerous. Its a myth that crown vic front end is safer on f100. What would be safer is to do a whole body swap.
@markjeffels3327
@markjeffels3327 3 года назад
@@timesthree5757 I understand your point of view, but I guess it's the softer ride and power steering then people are after.
@timesthree5757
@timesthree5757 3 года назад
@@markjeffels3327 ok well their is after market parts made for the f100's. Lastly it's a pickup truck not a crown vic. It's not supposed to be a smooth ride.
@davidrobinson5943
@davidrobinson5943 4 года назад
Awesome front end swap I'm pretty sure it's going ride like a new truck thanks for sharing your content
@pppaybackkk
@pppaybackkk 4 года назад
About those rear control arm bushings. I know that on the Town Cars (limousines, same Panther platform as the CV) we have in the fleet at my work, they wear out fairly quickly. They do almost nothing until you're braking. I cringed at re-clocking the bearings because of how often I replace them. I would have hoped the kit would have allowed for the mounts to be at the stock angle. I hate having to modify wear parts. The wear comes a lot from drying out and cracking, rather than physical damage. I've never found a polyurethane replacement, otherwise I'd use it.
@trentmazzotta2356
@trentmazzotta2356 4 года назад
9:51 the way mechanics work on their own cars.
@330_garage3
@330_garage3 4 года назад
LOL!! Get out the big hammer
@eliseorafaelmataramirez5021
@eliseorafaelmataramirez5021 4 года назад
Excelente trabajo Gracias por compartir. Adelante
@robertappleyard7053
@robertappleyard7053 4 года назад
Excellent work. Should've subscribed earlier, have been watching since the beginning.
@330_garage3
@330_garage3 4 года назад
Thanks
@scottharvey3054
@scottharvey3054 4 года назад
Nice job!
@musclecustoms1967
@musclecustoms1967 3 года назад
Man this is Badass!
@Dancing_Alone_wRentals
@Dancing_Alone_wRentals 3 года назад
Fun to see how far along this truck is a year after it was in the woods.
@automotiveaddiction428
@automotiveaddiction428 3 года назад
Picked up a 77 f150..hopefully I can do the swap with the crown vic...will be watching all your videos to see how your build goes
@330_garage3
@330_garage3 3 года назад
Nice! its a great improvement to these trucks! Hopefully this video gets you started in the right direction!
@UncleRobsGarage
@UncleRobsGarage 4 года назад
Great job!
@kenswitzer4133
@kenswitzer4133 4 года назад
Looking good!👍🇺🇸🤙😃
@johnsmith-qz4bv
@johnsmith-qz4bv 4 года назад
great work
@jimbinger
@jimbinger 4 года назад
Amazing! Would you recommend something similar for my '48?
@59vaughn
@59vaughn 4 года назад
Super build....
@mattsgarage6670
@mattsgarage6670 3 года назад
You sure are good with that welder
@timw6596
@timw6596 3 года назад
I see some major rust in the frame coming your way ! inside that boxed area is going to go fast !
@330_garage3
@330_garage3 3 года назад
It hasn't rusted through in 50 years... I figure it will make it another 50
@bme6949
@bme6949 4 года назад
Looking nice .
@Beandiptheredneck
@Beandiptheredneck 4 года назад
Dude glasses!! They are cheap, easily installed and much easier and less painful to replace than an eyeball!
@330_garage3
@330_garage3 4 года назад
LOL easily installed!
@georgef1176
@georgef1176 4 года назад
You don’t need to build the boxes to mount the clip. Get tube You drill holes in the frame and mount tubes as mount slugs. It’s cleaner and more efficient. That’s how I always did it.
@danwoodliff7287
@danwoodliff7287 3 года назад
Thanks for post... Really good job.. Danny
@330_garage3
@330_garage3 3 года назад
Glad you guys are finding this content helpful!
@Ikillintel1
@Ikillintel1 3 года назад
I like what you're doing, its gonna look good...myself when I get around to it, going with QA1 front and rear kit.
@330_garage3
@330_garage3 3 года назад
QA1 makes really nice stuff, they were just a little more $ than I wanted to spend
@Ikillintel1
@Ikillintel1 3 года назад
@@330_garage3 Oh, I hear ya...definitely not the cheapest route. I've watched you build the truck from the beginning...I'm still watching. Don't worry about the subscribers, they come and go & come again.
@dc7837
@dc7837 4 года назад
I've been wanting to do this swap, my concern was the width of the Crown Vic. I see you used the CV wheels which are offset to the outside edge of the wheel. Would there be a problem with an aftermarket set of wheels? At a 0 offset that would add 3" I'm guessing. I'm thinking they would rub the fenders.
@talesofanasphaltjockey
@talesofanasphaltjockey 4 года назад
Awesome videos man , learning a lot from your experience
@anomamos9095
@anomamos9095 4 года назад
Everyone lowers their trucks but you can get about an inch of height if you fit those boxes from the bottom instead of the top.
@nathanrittenhouse3589
@nathanrittenhouse3589 4 года назад
Thanks
@antarcticmoongiant2691
@antarcticmoongiant2691 4 года назад
Nice cab mounts, good time to clean the 50years of dirt out of them! Hows it drive with a fe or a 460/29 setting on it? Drop spindles on 76+79 disk beams & ps box would keep it all truck parts
@maxpain1947
@maxpain1947 3 года назад
Nice dude your hired..
@330_garage3
@330_garage3 3 года назад
LOL! I hope you pay well
@nakedgoblin4090
@nakedgoblin4090 4 года назад
Measure twice cuts once brother good job 👍
@330_garage3
@330_garage3 4 года назад
Its always harder to put the metal back on, if you cut too much off!
@joss9481
@joss9481 4 года назад
Hi i really enjoyed the video but I wanted to know what you did with the old spindle? Mine recently broke and i've been looking for some.
@strdieselservicellc
@strdieselservicellc 4 года назад
Awesome content! I have watched all the videos over the last two days! New sub for sure! If you don’t mind do you have any kinks to the recording equipment you are using? Mic, camera, etc... Thanks! Keep it up!
@330_garage3
@330_garage3 4 года назад
nice! Thanks
@markconley9279
@markconley9279 4 года назад
Ever thought about moving the front centerline forward an inch or two? I think the wheels would ‘fit’ better in the wheel arch.
@pvawaterops1962
@pvawaterops1962 3 года назад
So I have seen videos where other guys measure the holes differently. I have a 72 and I believe it has the same holes yours does for the line up pin on the crown vic. I just want to make sure my wheels are centered in the fenders. You way looks the easiest that I have seen. Any advice would be appreciated. Thanks for all the videos as well.
@chrishurlocker9360
@chrishurlocker9360 4 года назад
What were your measurements on the dial pins once you got the suspension installed
@kimkramer5773
@kimkramer5773 4 года назад
Heeeey, come back, come back!!
@mikeilikeit9685
@mikeilikeit9685 3 года назад
very good
@scottharvey3054
@scottharvey3054 4 года назад
Been waiting.......
@300whiteout9
@300whiteout9 3 года назад
I love the crown Vic swap but I hate the 4.6L engine inside them but I am going to attempt this build once I find a good Vic I can drive for a bit while I strip the truck down
@jesus6798
@jesus6798 2 года назад
i just did tho whole swap watching your videos man, i couldnt of done it with out it. when you were welding the boxes. did you weld the inside too, or just the top and bottom?
@tommiebyrne8720
@tommiebyrne8720 2 года назад
nice work, what size wheels are you going to run
Далее
F100 Crown Vic Swap II
24:40
Просмотров 133 тыс.
F100 Outcast Autoworks 4 link Installation
43:11
Просмотров 285 тыс.
F WORD: a coyote-powered, protouring patina '69 F100
17:20
F100 -  Relocating Fuel Tank to Rear
26:11
Просмотров 120 тыс.
The Sidi Rex Boots🔥 #motorcycle #racing #shorts
0:14