First Rip in the Epic Banshee Powered Shifter Kart! Part 6

Подписаться 88 тыс.

Просмотров 205 тыс.

50% 1

It took longer than expected to engine swap the two-stroke engine from the Yamaha Banshee into the Shifter Kart. However, in today's video, we finally get to test out the kart and see how it performs around the driveway. I hope you all enjoy the video as much I enjoyed testing out the kart, and stay tuned for more fabrication work and improvements to come!
Help support the channel and shop my favorite tools at The D Zone- thed.zone/product-tag/tool-co...
My Favorite Engine Building Tools- thed.zone/product-tag/engine-...
Instagram: adampaganelli
Business email: pagsli34@gmail.com
Music:
Song: Niwel - Zdarmania (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Niwel - Zdarmania (Vlo...
Song: SKANDR - Summer Booty (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • SKANDR - Summer Booty ...

Авто/Мото

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 309

@adampaganelli4891 4 года назад

Thanks for watching! If you are looking for a way to support the channel consider shopping for your Powersports parts at The D Zone. I also put together a list of my most commonly used tools for you guys to reference- thed.zone/product-tag/tool-collection/?count=36&orderby=popularity&ref=AP34

@5dsunny713 4 года назад

This engine over a 420 from go power sports ! It has a lot more power potential this is probably slightly modified a port on the head would make it faster than anything from a go cart supply place .. what’s the difference in price ? Have you worked with other engines?

@JamesAnderson-ow5mj 2 года назад

What did you do with the motor you had on this

@BlakeEM 4 года назад

You need to move the chain tensioner to the bottom chain or it will bend again when you get traction. Spin the wheels in the correct direction and look at where the chain is slack, that is where you put the tensioner. Right now it's sending all the power into the tensioner causing it to bend and it will break again. Good luck with the build!

@tristanstorey1261 4 года назад

@Adam Paganelli As above - tension (or remove the excess slack) from the non-drive side of the chain. In your case underneath

@adampaganelli4891 4 года назад

Thanks for the feedback👍🏼

@jaydensdream714 4 года назад

Yes I 100% agree. A tensioner does not have to be robust. Just practical enough to keep the free slack out of the way and keep the links buried in the sprocket. Tbh I have always been impressed by your process. You seem to have always weighed options when you finally commit to a method. Great job!

@eamh2002 4 года назад

Exactly my thoughts on the tensioner, was going to comment the same :)

@brycedavis907 4 года назад

I had a shudder when I saw you putting the roller on the drive side. I doubt it will last terribly long like that. If it doesn't bend the bracket the roller will wear really quick, the load if that wheel hops is unreal!

@gt1man931 4 года назад

Tensioner goes on the slack side, not the pull side.

@2wheelhoon813 4 года назад

Its amazing how someone can have so little common sense they fuck this up..... im shure his motor mounts wont brake when he gets the engine warmed up on dry ground lol. you wanna see the biggest shitshow on youtoube. go look up MOTOMIGS and look at his motor mount on the mini nascar lmao. its amazing that kid can take a shit on his own.

@refugeinc.159 4 года назад

@@2wheelhoon813 It's also amazing that someone doesn't know how to spell the word 'sure.' I mean, we learned that in like 1st grade. Give him a break, maybe he's new to all this and still learning.

@2wheelhoon813 4 года назад

@@refugeinc.159 that's not learning it's common sense. As soon as the chain pulls tight it would bend down..... Come the fuck on now seriously. My problem is RU-vidrs need people to stop making videos beginners turn to to learn the wrong way. Because of RU-vid there's people who are new to the hobby that think ohhh I'll just put this eBay turbo kit on my car and life is good. "I did it when I was young bc I sa it on RU-vid" well they skipped the part about the aftermarket boost controller and added waste Gates and ignition cut boxes and different map sensors..... These people portray hotroding as a easy and friendly hobby when it isn't. And it's certainly not cheap. Half these videos are fairy tales that people watch bc they wish it were true. But than there is some really intelligent RU-vidrs doing cool shit and teaching good skills and being open about the cost and time involved.

@2wheelhoon813 4 года назад

@@refugeinc.159 check out grind hard plumbing company's videos

@nswiss19751 4 года назад

Chain tensioner on bottom

@VasilyBuilds 4 года назад

Awesome 👍 shee is insane. I feel you on the electric start

@WolfieBoostin20lbs 4 года назад

The tensioner needs to be on the bottom of the chain. The top will always be tight under acceleration 👍🏼

@kaizousha5531 4 года назад

I would actually avoid a tensioner all together because when you downshift or engine brake the lower side will have a ton of tension too. Just pot the engine in the right place

@mareksumguy1887 4 года назад

This clown doesn’t even understand basic mechanics. Just another RU-vid hack job.

@mpmcnicnacs2917 3 года назад

Marek Sumguy you couldn’t do better

@scorpioslab 3 года назад

Never a tensioner on a drive chain. You need a slide bracket.

@Les__Mack 4 года назад

Good work! Thanks for a great video. I really needed this after a long day at work.

@roberttaylor8261 Год назад

I built a shifter cart in “78” . It’s was a Yamaha race cart that had a 100 cc motor blown when I bought it. I bought a Suzuki 370 RM 2-stroke with kick start. Put motor behind seat over the axle the kick start worked good with enough room to kick it. The exhaust I cut 3-4 times an twisted it so fit nice. The shift rod was just straight rod motor shifter turned up and and loop welded to it so just 1 forward and 4 back. The clutch was just the regular handle with pc handle bar welded to frame an really only used to take off an come to stop. Was very fast about 70? Really loud when brought out the people in neighborhood all came out.

@JMKGarage Год назад

Oh man that’s gotta be so much fun! My cbr125 shifter kart that I just build is plenty of fun, and I could only imagine if it had a banshee motor (really regret ever selling my banshee… it was a blast!).

@TheRSGarage 4 года назад

Test drive in the wet with slicks... brilliant! Now I want a banshee engine for my kart builds!!

@ryanverster4750 4 года назад

Adam very nice. Kart has lots of power and sounds amazing. Put the chain tensioner on the bottom of the chain. Upper side is the the power side thats why its bent... other than that very nice

@Danicloud100 4 года назад

Yes put it in the bottom 👍👍

@paullakamp8775 4 года назад

Forget the track, a wet Walmart parking lot would be great! But can’t wait for the next video though

@laloutre3180 4 года назад

Congrat for your top project Adam it's a real challenge & you succeed ! 💪💪💪👍👍👍

@kieranmann9761 4 года назад

Awesome!! That kart looks like a handful!! Good luck with the chain tensioner.

@Psy6o Год назад

You got a hell of a nice yard

@camyota 4 года назад

You're really gonna want that roller/tensioner on the bottom of the chain.

@robheathcote8561 4 года назад

thats awesome mate, when i saw it i had to think "good thing your not bigger than you are otherwise ya wouldnt fit". verry very cool my friend.

@UlisesGlez26 4 года назад

That thing is crazy!!! Haha just a few little things to fix up and it's track ready, proud of you Adam, the fact that you're doing this all by yourself is just amazing, keep learning and growing bro💪🏻

@adampaganelli4891 4 года назад

Thanks for the support man👍🏼

@josephcamacho8940 4 года назад

I love the Build though keep up with the great content

@billallen4793 4 года назад

Great project and thank you for your hard work!! ...from Wyoming USA 🔫🤠

@rodgercostello9814 3 года назад

Terrific job, looks and sounds awesome, dont think id have tried it in the wet with slicks lol but awesome bit of work, 10/10 looks just great. You had me when you rope pulled to start and it worked , sounds awesome. That engine was made for it

@GODOY97GT 3 года назад

What a widowmaker Adam, congrats. Regards from Spain

@baby-sharkgto4902 4 года назад

I just found this channel and I like it! Subbed

@florisheuperman5048 4 года назад

Congrats you have created a monster😎

@MateuszMateusz-cg8ll 4 года назад

Good work:)

@davidlarson6032 4 года назад

That is one sweet ride

@adampaganelli4891 4 года назад

Thanks👍🏼

@sparowship 4 года назад

This kart is looking realy like badass! You now need a race track.

@MrThunderCunt 2 года назад

This thing is awsome bro

@CRIFLIFE 4 года назад

Badass! Now take it out on the road

@Tyresong 4 года назад

good on ya putting the tensioner on the tight side

@RAWRMotorsports 3 года назад

This thing is 💥🔥🔥

@pbpaulieb 4 года назад

Motor sounds very rich.

@danshealthylifestyle8443 4 года назад

Damn that thing is a monster be careful man

@oscarchamberlain4167 4 года назад

Just love your vids man I gave this vid a like as well you deserve more subscribers then you have keep on the grind

@adampaganelli4891 4 года назад

Thanks Oscar🙏

@glenpiro313 4 года назад

Very cool! Looks like a beast man, great build!! A couple hints, youve got plenty on the chain tensioner and starting, but definitely invest in a pair of Milbar lock/safety wire pliers and a spool of lockwire, no more hardware vibrating off. Use lots of springs and rubber mounts on your exhausts, theyll be much happier. Well done man.

@drujames272 4 года назад

Well done mate , i put a CR500 engine in mine lol , looks like yours is just as insane as mine 👍

@rabbyredpath3598 4 года назад

Woooow!! What an awesome build, so much power beneath your feet too, only one thing though, the chain tensioner needs to be on the bottom or it will keep bending ☺ keep grinding dude, mad respect from Scotland 🇬🇧

@bighomieJ5X 4 года назад

Thanks so much Adam for the awesome content ,b4 Xmas we will be watching a track vid 😁😁 #1000likes

@atwaass 4 года назад

I was going to mention the tensioner position but everyone beat me to it lol

@erichildreth7562 4 года назад

Man that is an awesome build and yes I gave this a thumbs up!! If the steering was moved to the left a little more then it looks like it would be a lot easier to drive it!

@kristianwhiskin1070 3 года назад

These engines sound fucking awesome!! Gotta love a proper 2 stroke

@jimmadonna1436 4 года назад

Adam, It looks really tricked out. The fabrication work that you did is a reflection of how TALENTED you are. Love the coil piece you made. When the engine cleared its throat, she ran like a bat out of HELL. I'm looking forward to seeing you run her when it's dry.

@adampaganelli4891 4 года назад

Really appreciate it Jim👍🏼 I need to continue to get better for sure!

@jimmadonna1436 4 года назад

@@adampaganelli4891 That's awesome!

@stevendunn405 3 года назад

nice build. very nice my banchee 4 wheeler would do over 105 mph by adding tumi ss pipes, jetting carbs,and port n polish heads,plus 40over and high compression pistons

@Snugglez187 4 года назад

That thing is VIOLENT! 😂

@raptornation9891 4 года назад

You should get one of those 360 cameras for sick footage

@jacksonwheel1464 Год назад

I have a frame and I’m contemplating acquiring with these motors. How did you mount it?

@mqshortyshort7478 4 года назад

That thing looks like an awesome adrenaline rush machine love it. Is it a stock banshee motor? That thing has a lot of talk

@justinalexander6951 4 года назад

Use cordless impact to start it

@dirteaters-wg8pj 4 года назад

I would put the kick starter back on.

@Geo-xj8ti 4 года назад

The chain tensioner should work just fine as long as you just go backwards all the time.

@SgtPickledic 4 года назад

nice go kart whats it held together with? 793 zipties

@lukecombs5659 4 года назад

Yes put the chain roller on the bottom side of the chain cause when you get on the gas the top side of the chain has tension on it on it and the bottom is slacked I believe that will fix that problem sweet build bro

@BarkBarkBunnyRabbit 4 года назад

(idle adjustment is on the carb's.... thats just cable slack adjustment)

@Gadget-Tree 4 года назад

Maybe but more likely it has a screw that lifts the slide when you thread it in . Its not common to run thottle cable tight between the carb and the twist grip . Slack is actually recomended and standard on motorcycles .

@BarkBarkBunnyRabbit 4 года назад

@@Gadget-Tree i know, i just said that dude lol

@keithheiskell2389 4 года назад

Chain tensioner goes on the bottom of the chain not the top, but it'll work for a little while

@roberttaylor8261 Год назад

The tension on top when engine pulls straightens chain so slack will be under the bottom so the old school had a heavy spring and a roller on it.

@thedude7726 4 года назад

Do you not have room for the kick starter? Even if you hand crank it , it would be better then the rope n tire .

@christianbuczko1481 3 года назад

Im curious how you plan on moving the steering to the side. I dont think thats an easy job.

@rpmjunky2795 4 года назад

Sounds like it’s running lean, sucking air somewhere. With that 2 into 1 setup you have to use 2 intake gaskets. Did you do that?

@ronzogo 4 года назад

Make a kart stand and use third gear to strap start it that's how we do it at WKA road races and events. We can even start with just turning the wheel with our hands once after it is warmed up.

@dirtrider2853 4 года назад

Try to place the chain support on the other side of the chain, because when you start to drive, your chain will tense up on the side where the sprocket of the engine is"pulling" on the chain. This will force the chain support to bend upwards. I think you can try to weld it underneath the chain, on the other side of the chain. But otherwise when you do this, your supporter breaks when you force it in die other direction (enginestart or enginebreak)

@josephcamacho8940 4 года назад

Yes absolutely right Adam spin the wheels to see which way to slack is but you definitely have to put it on the bottom side not the side that the motor Torx the chain

@tingel1985 3 года назад

Will you make a update video or is this project end ? I have a Rotax 2 cylinder inside my Kart but with Skidoo CVT :-)

@tylernewsome217 4 года назад

Tensioner would work a lot better on the other side, awesome build though!

@billywaynehuggins8567 4 года назад

Great job I like the way you started it but one little thing the chain tensioner should be on the bottom of the chain the chain pulled tight at the top but your slack always comes in the bottom side the chain pulls the rear sprocket the slack is always on the bottom but you've got one hell of a kart built I bet it will fly

@eddiegilson5201 4 года назад

Hi. Chain tensioner needs to be at the bottom of chain, providing there is room. If still bending brackets, spring load tensioner. The seat is somewhat to the left as to equalise weight distribution with engines mounted to the right.

@5dsunny713 4 года назад

Ok I have a couple questions where did you get a banshee engine from how much was it .. what was the difficulty of the install I want to do this engine but on a cross kart style but a cheaper manco go kart type if you get what I’m saying just something with a good supension that I can do road and dirt depending on tires .. PLEASE ANY HELP or DIRECTION would be greatly appreciated 💪💯

@rajakhan-lr1yx 4 года назад

Badass

@benjamindavidson632 4 года назад

I think I'd put on some cut down bars and use dirt bike controls and have a cup shifter for your foot.

@apexpredator1192 3 года назад

wow you had to move seat way over great job with this build

@theravedaddy 4 года назад

From waveblaster experience those water hoses have a big kink in them where they go around the engine, they could fold flatter when they heat up and restrict coolant flow. Id put metal 90 degree elbows in there which i did after losing a blaster motor from coolant starvation. Im sure you're aware of the chain tensioner already :)

@adampaganelli4891 4 года назад

Thanks for the tip! I think the hose you’re referring to already has a 90 degree bend on it. Maybe I will look for a 180!

@theravedaddy 4 года назад

@@adampaganelli4891 i was typing fast but yeah, its the bends on the head and the pump outlet, once a hose goes over 90 degrees it will try to fold flat on its self when it gets hot. It is possible to route them down low? Im liking your work tho, its like watching me.... 40 years ago!

@idiot-983 3 года назад

Your pull handle looks like the old linkage off my CR500 suspension.

@isaiahfitzgerald1713 4 года назад

I feel bad for your neighbors😂💯

@seankaine2411 4 года назад

You see his driveway I dont think his neighbors are close enough too complain.

@pvanb291 4 года назад

Nice work! By now, I'm sure you will have changed that chain tensioner and hopefully offset the seat on a slight angle so you can get in better. You won't be in line with the frame, but after many years of racing my grass kart (Suzuki RM250) you don't notice it. Have a look at your pilot jet size as it could be running a bit lean, making it idle too fast. Enjoy the kart and take it to a track where you can legally and safely see what it will do ;)

@driver694 2 года назад

How fast is it compared to a KZ2 Shifter Kart?

@linedidier1799 4 года назад

WoW good job man you’re very inspiring

@mrmrjones7519 3 года назад

Sprocket guides and a spring tensioner on the underside chap will help the slap I wouldn’t put the hot and cold cooling pipes together, otherwise nice kart

@jamescarpenter1095 4 года назад

Get a couple supertrap exhaust cans and you will quite enjoy the sound of that banshee engine.

@edgardoccruz1349 4 года назад

Make another video on dry pavement!!👍👍💪💪

@13conair 4 года назад

get the chain tensioner under the bottom of the chain where its slack even on the power.

@darkone1685 4 года назад

Prbly idles fast on the choke ! Wait till she warms up first !

@johnry888 4 года назад

Dont know if you solved it but a vacuum leak will make it idle high also make sure everything is sealed around the carb. Can cause a burn down if you dont catch it.

@elvingarcia3770 4 года назад

You can bump start it with you on it and someone pushing you

@JamesAnderson-ow5mj 2 года назад

Well now that I know what was on this for sure I own this cart now was gonna put a smaller motor for my son on it but mite have to put another banshee motor on it

@user-sz6zu4qq4j Месяц назад

I don't think you needed suit up with all that gear just for that little spin bro.. lol.. cool cart..

@jwallace2913 3 года назад

Ditch the tensioner and remove some links to get the proper length you need.

@dustinenos2934 3 года назад

No you half to mount the chain tenchiner on the bottom return side of the chain or every time you hit the throttle you will be putting major force on it

@stateofemergency4966 4 года назад

@12:03 is that water you sit in?

@nathanielchavez3419 Год назад

Does it use a fuel pump?

@2yrcrosskartbuild 3 года назад

if i was you i be pushin startin it

@sketchyoperations9181 4 года назад

Dude you got to put the tensioner on the bottom

@zachbredeson7976 3 года назад

Use the old kickstart piece that slides onto the shaft weld a plate on to that with a Groove in it use a steel cable so it's less likely to break and make a bracket that holds like a T handle so you pull that and it's like a cantilever wheel on a compound bow and it turns the shaft for the kickstarter and starts it that way my dad put a RD 400 motor in a dune buggy and devised a pulley system so you could sit inside in the seat pull a rope and it would start the motor it was actually pretty neat I wish I would have had pictures before he took it apart

@kdcustoms1272 4 года назад

Need some rubber mounts for the exhaust

@JasonStaleyFitness 4 года назад

No one realises that chain tensioners need to go on the bottom of the chain because that is the slack side when you are driving and it will break/bend the tensioner if you gas it or really get on it when it is on the top of the chain. Anyways love the build lol

@user-lm8fx6kc1b 3 года назад

We want to see you do some 3rd gear donuts

@Acestrex 3 года назад

No wet road tests!!

@xibidit 4 года назад

Vasily and Rob dahm had a baby!

@tylerneil9749 4 года назад

Do you live in Washington? I’m from Puyallup!

@matthewanderson7766 4 года назад

wrong side of the chain you don't put it on the torq side put it on the sagging side witch is the bottom of the chain

@jacobrodriguez3296 4 года назад

What gear are you pulling it in ? If you put it in 5th gear it will spin the engine faster and easier!!

@motoblast3574 4 года назад

maybe go up one size pilot jet and set the idle on the carb screw first.

@colbywelch2574 4 года назад

The coolant line off the head looks pinched, radius the line out further to make sure you’re getting proper flow. It might get hot as it currently is set up