Starting On My YZ250 Engine Build! Part 6

Подписаться 88 тыс.

Просмотров 35 тыс.

50% 1

In today's video, I begin on my YZ250 Two-stroke engine build. I will start off with Cerakoting the cases in an awesome satin aluminum color and then I install brand new bearings from Wrench Rabbit. After this, the Rocky Mountain transmission kit is installed and a new brand Hot Rods crank is pulled into the cases. The plan for the engine is to be extremely powerful with an enduro/ desert racing twist on the build. (Hopefully, it looks amazing as well.)
Help support the channel and shop my favorite tools at The D Zone- thed.zone/product-tag/tool-co...
My favorite Engine Tools- thed.zone/product-tag/engine-...
Links to Products-
Cerakote- www.cerakote.com/finishes/H-1...
Wrench Rabbit Rebuild Kit- www.wrenchrabbit.com
Oven- amzn.to/33nL3ge
Instagram- @adampaganelli
Business Email- paganelliadam@gmail.com
Music:
Song: Nekzlo - Palm Shadows (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Nekzlo - Palm Shadows ...
Song: SKANDR - Summer Booty (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • SKANDR - Summer Booty ...
Song: LiQWYD - Flow (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • LiQWYD - Flow (Vlog No...
Song: LiQWYD - Glow (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • LiQWYD - Glow (Vlog No...

Хобби

Опубликовано:

13 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@jakan756 4 года назад

this is a very professionel video that alot of people will find helpful for many years forward. A big thanx from Sweden.

@jordanpanich 4 года назад

Sweet video as always! Can't wait to see how this build turns out!

@tomatoknuckles 4 года назад

Coming along nicely man. Gonna be sweet when it's finished 👌

@FULLTHROTTLEFILMZ 4 года назад

Awesome work bro it looks amazing you’re always getting better 🤘🏻

@UlisesGlez26 4 года назад

It's coming along so sweet!!

@phgv2499 4 года назад

Looks great I can't wait till it's done

@robheathcote8561 4 года назад

Looking good so far mate, keep it up

@epicst0rm330 4 года назад

Amazing video. Great work , can´t wait to see the final result xD

@darrenarnold7361 4 года назад

Love it don’t take so long todo the next vid 👍🏻

@dlockel25 4 года назад

Another great video. Thank you!

@aaronrmz2502 4 года назад

Nice!! I love your videos!

@soderholm3805 4 года назад

Tbh you are probably the best ”bike build” channel because you uppland often and have awesome quality vids(: Keep up the great work

@graemebarrett7406 4 года назад

The cases look sick!! Seriously tidy work!!

@adampaganelli4891 4 года назад

Thank you!

@erichildreth7562 4 года назад

Man that motor is going to look incredible when you are done putting it all back together!! That Tusk crank puller/installer is worth every penny, I'm glad that I bought one! You do some incredible work and you have some mad mechanical skills to boot!! Can't wait to see the next video! :)

@adampaganelli4891 4 года назад

Thanks Erik!

@nicholasott6268 4 года назад

loved the video man!!

@adampaganelli4891 4 года назад

Thanks Nick

@sideast 4 года назад

Brill!!

@shanemeyer129 4 года назад

That looks super sick. You should do the water pump cover burnt bronze or something like that. Or black

@adampaganelli4891 4 года назад

Thanks Shane!

@shanemeyer129 4 года назад

@@adampaganelli4891 no problem. When you're done with your current builds, you should look into Honda Odysseys. I have one right now that I'm building and there super sick and simple

@adampaganelli4891 4 года назад

I have been watching a build on one by another RU-vid channel and they are killing it. Looks like a ton of fun.

@jimmadonna1436 4 года назад

Shane, I think that the Burnt Bronze would look the best.

@UlisesGlez26 4 года назад

Congratulations on the 40k mark bro!!!

@adampaganelli4891 4 года назад

Thank you 🤯 you’ve been one of my top supporters for a while! I appreciate the Love man

@UlisesGlez26 4 года назад

@@adampaganelli4891 absolutely bro, thank you for noting that, I'll always be there Adam🤙🏻

@01AceAlpha 4 года назад

Looks better than polished out cases! And I’d bet will be much easier to clean and maintain the look.

@01AceAlpha 4 года назад

One tip for removing old seals, tape an entire sheet of sand paper to a piece of glass, marble, or a mirror and move the piece you want to sand on top of it. It will keep your surfaces more “true and even”.

@disfordiesel9301 4 года назад

9:29 yo someone who lays stuff out like a parts diagram, I’m not the only one.

@BrendanMX 4 года назад

Couple tips coming from someone who’s been building engines for a long time. Hot rods bearings are not very good. It looks like you didn’t add line to the bearings, and NEVER put the seals in before you put the shaft through unless you have to but on yzs you can get the crank cases together before you install any seals

@KoltFin 4 года назад

Most youtubers use hotrods because they get the parts for free aka a sponsorship. And they are just going to sell the bike so long term durability isn't at the top of their list.

@jimmadonna1436 4 года назад

Love the color and results. Did you make the engine stand or but it. I like the CAM STRONG sticker on it!.

@adampaganelli4891 4 года назад

Thanks Jim! I made the stand I have a video up on my channel about it

@jimmadonna1436 4 года назад

@@adampaganelli4891 cool thanks. I'll check it out. I need to make one. Thanks for answering my question. I'm really enjoying your channel.

@kieranmann9761 4 года назад

Looking excellent!! How about a Boyesen water pump cover?

@adampaganelli4891 4 года назад

That would be nice! Probably not in the budget for this build unfortunately.

@aaronodguy967 4 года назад

Did you consider putting the wr426f transmission in it?

@rileymoulton9595 4 года назад

Hey man great videos really enjoy the detail you go into, would you think that a 07 yz250 engine is pretty similar?

@adampaganelli4891 4 года назад

Thanks for the support👍🏼 the 07 is the exact same!

@VasilyBuilds 4 года назад

Sick color! how much do those ovens run for?

@adampaganelli4891 4 года назад

Thanks, they're around 60 at Walmart.

@BTR2018 4 года назад

Coming together NICELY:) Soon you’ll let’er rip tater chip. ☄️⚡️🔥💥

@adampaganelli4891 4 года назад

Yessir!

@ewanduplessis9682 4 года назад

Adam Paganelli Does the Wrench Rabbit kit include ALL the bearings for the engine needed for a rebuilt? Nice work man

@nicholasmorris617 4 года назад

Did you skip the Acetone step in the cerokoting process?

@andyb7766 4 года назад

Could I ask what letter oven do you use thanks

@elvitrueno 4 года назад

what rotor are you going to use that motorcycle

@christianperez671 4 года назад

Do you think I could do this for a first timer or is difficult?

@keithwells384 4 года назад

Wheres part 7 been dieing to watch it

@adampaganelli4891 4 года назад

Sorry Keith! It’s coming here soon I had to get my wisdom teeth pulled

@GregHitchko 4 года назад

Yo Adam! When you cerekoted the cases, you didn’t have to heat tape off the bolt holes?

@adampaganelli4891 4 года назад

The Cerakote isn’t thick enough to clog the threads!

@GregHitchko 4 года назад

Oh right on! That makes life way easier haha

@tierandonnelly1420 4 года назад

dude im hanging out for part 7 of this build

@adampaganelli4891 4 года назад

Part 7 has been out for a while!

@jamierobinson5394 4 года назад

Hi mate when are u making part 7

@adampaganelli4891 4 года назад

Working on it this week! Things got pushed back as I had to get my wisdom teeth pulled.

@nicholasott6268 4 года назад

what's the best advice for someone to learn how to work on dirt bikes?

@adampaganelli4891 4 года назад

Make sure to have a service manual and do your research. The better you understand how the different mechanical systems work the easier it's to diagnose issues with a bike.

@nicholasott6268 4 года назад

@@adampaganelli4891 thanks.