Fix Wheel End Rattling Noise | Clunking noise over rough roads | Easy brake service 

Thanks for demo'ing a Hyundai brake caliper. I'm having this problem with my '18 Santa Fe, and it's really LOUD going down the road. Never would have though such a simple thing can make such a racket.

Very helpful, did it on my Toyota Runx TRD, worked well knocking noise is gone

R50 Mini and in traffic today I heard that very sound. Thank you will have a look at the brakes. Been watching a lot of sound videos to id it.

1st time visit this page. Thanks for for your kind reply to your viewers doubt. Keep rocking

This is crazy solution but if something is stupid but it works - it is not so stupid! :) Did it myself to my Toyota Avensis - front calipers, now its time for 500 km test drive :)

This guy has separate fan base 👌🏼👌🏼

Thanks for the video , I have been done in a 03 ford ranger xlt and works perfectly

Frikin Genius my friend, I've changed struts c/arms stab/links, of course pads& rotors, here I am 6 months later, using your method again thank you!!

Just helped me figure out my problem!

Thanks for this! Just what I needed to help me find the problem. However, you only need more grease in the slider pin hole to stop the shaking.

MAN, I LOVE YOU!!!!!! YOU GUIDED ME STRAIGHT TO MY PROBLEM

Wow. Never thought those bolts might go bad. Thanks

After a long time a video from u bro...

This actually works pretty well especially if you don't have the funds for new calipers.

Thanks very much I use an red bull tin and the noise stop

Many thanks

OMG, I can't believe that so many people think that this is a good solution! First of all, the only thing that should be on these caliper slide pins Is brake grease. Whichever component/s that's responsible for the noise which might be a bad rotor, bald tires, loose caliper bolts, Xtra thin brake pads dancing around in the caliper; just fix the faulty component of replace when fixing is not an option. This is total madness particularly when dealing with one of the most critical systems on your automobile.

It worked. Except I wrapped a cut piece of flashing most of the way around the pin to fill in more of the gap. Never would have figured this out without your video, good job. However, its probably better just to buy a new caliper set anyhow.

Replace the caliper bracket and pins with new ones.

Big up you 👍 was looking for this tempory solution till i order my new set of sliding pins👍big up urself very helpful

👍👍 great job bro 👏

Bro, you should be the next "Chrisfix"!

My ford ikon gave same problem. The garage told me it would cost me 1000 rs to get it fixed. For how long this solution will last. And do we need to use aluminum paper used for wraping chapati ?

welcome back i dunno if you remeber me from a post is commented on before about MAF sensor having issues with power , well all along it wasnt my engine or anything like that its was the left side of my car the break binding on i only noticed this even more when i pulled away from the traffic lights and it felt like the hand break was on when it wasnt got it home the left side tire was hot and the break disk was boiling so amsuming somthing up with the caliper has the right side is fine but iv took wheel off hammered it a couple a times put some stuff on and it seems to pull away alot beter and maintain speed and also noticed who ever had the car before me when they changed the pads they didnt put a clip on the ouside break to hold it in place think its a retaining clip but thanks for vids welcome back

Im having a rattling and clunking noise every time im breaking l do changed the swaybar links already and it’s still there

I have a sound in the rear wheel only when I drive on a bumpy road . When I drive on a bumpy road, the sound appears,When I press the brakes, the sound disappears. Does what is in the video apply to my case?

Hey brother I have a 2021 honda accord I am getting that noise on 1 side after changing brakes and rotors. I have replaced everything. I can't move it by hand much I can rock it a little side to side is that normal

Welcome back mate, long time. As always right video at the right time...so this is basically tinfoil right? :)

I have this sound on a honda. I changed my brakes a few weeks ago and now the noise has came. Is jt safe to drive like this?

I'm pretty sure this is what I'm experiencing on my subaru forester. I recently had the front brakes inspected at a mechanic shop, but they said everything was fine. Is this sound a reason to be concerned?

Hello bro i have checked in my swift diezel the first 2 glow plugs are not giving spark and last two are giving just mild sparks while connecting the other end of wire to positive terminal of battery. That means first two are faulty ? I encountered white smoke for 10 seconds during cold startup in mountains please help and advice

Thanks, great video and that noise seems to be the same noise I recently started hearing on my front end driver's side on bumpy roads. Since the container aluminum foil is inserted to take up excess space from wear and tear, do you have any idea how long this type of repair might last??? I guess the other option is.... installing new front brake calipers... right if this in indeed my problem??? Thanks again!!!

Did it on my Chrysler 200, i want to keep it like that cause its quiet now. But im worried it could start a fire ?

My car's noise sounds exactly like that, but it only does it on bumpy roads, in a nice well paved road doesn't do it. Could this be the problem?

Hello sir. Im driving a 2014 Hyundai i30, it runs smooth on a highway, the problem is that after driving it for about 20-30km, when i stop on a stop sign or traffic lights, theres a knocking sound on the left rear of the car, please help me figure out what could that be👏🏻👏🏻

i hear the rattling sound sometimes when i break like it’s rare why is that ?

Hi, my mazda 3 2008 has clunking noise too in puchy road but when you hit the break the noise is gone. Is it the brake caliper problem too ??? Pls help thanks

I LOVE this video. New brake pads, rotors, calipers, ETC.....ALL NEW, then paid 2 reliable brake service companies of a total of over $500 to completely go through the brake system and both did a complete re-bleed and they both could not find out how to fix this problem. So sad I had to spend so much money to brake companies who don't know everything about your brakes and that I had to spend weeks searching because I finally typed in search engine with the right words to find your video in order to solve myself.

I used sheem brass on mine.

Bro, How to lift engine from car without Hoist? Please share your thoughts..

bro may I know what is the sound when u heard it in your car. I have a tik tik tik sound, I wonder if this is caliper sound. Hmmm Appreciate if you reply my message e!

This should work great... For about 40 miles

Was that an ordinary paper or what material is that that you wrapped around the bolt?

What thickness is the metal shim?

Caliper ko silver paper konsa he?

You are leaving that foil in are you?

Permanent solution please

Bro is that aluminum foil?

Im all for creativity, but this is not it:(. I am facing the same issue on front left wheel, i just went to the junkyard and got a healthy carrier and pins…..cost me like 10 eur.

DANGEROUS REPAIR! GET NEW PINS!

Just replace worn out parts do not shove junk in where the pins go this is a horrible idea and awful practice.

The pins are $5 each just buy new ones.

why not just use new pins they not very expensive.

Total bodge, that metal foil will only last a short while before it fails. Not an endorsable practice.

Staffing kitchen aluminum foil inside brake calipers. What can possibly go wrong?!? This must be one of worst DIY on RU-vid.