Fix your CZ527 action! No more binding!

Подписаться 59 тыс.

Просмотров 58 тыс.

50% 1

Ive gotten a lot of requests for more detail on how to fix your CZ527 binding action issues, so here ya go boys and girls. Please like and share to help the video. Thank you.
Want to help our channel? Buy great stuff from these businesses who support our channel and help keep us going!!
V V V V V V V V V V V V V V V V V V V V V V V V V
Paypal Support Funds : Throw us a couple bucks to help buy stuff for the channel
paypal.me/ZRUS
Affiliate Links:
Gunadapters:
www.gunadapters.com/
Code "ZRUS" for 10% off your purchase
Major Sponsor of our channel!
-----------------------------------------------------------------------------------------------------------
OpticsPlanet: bit.ly/2eUd4Cm
5% off your entire purchase with coupon code "ZRUS" at optics planet.
-----------------------------------------------------------------------------------------------------
LA Police Gear:
la-police-gear.pxf.io/c/26694...
------------------------------------------------------------------------------------------------------
Matthews Fabrication adjustable cheek rests:
matthewsfabrication.com/
Use coupon code ZRUS10 for 10% off your purchase!
----------------------------------------------------------------------------------------------------------
Like our facebook page for updates and future content !!
/ zombiesruspage
Follow us on Instagram!
/ zrusoutdoors

Развлечения

Опубликовано:

28 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 186

@chapelhill6556 Год назад

I realize this is a year old video but I just picked a CZ 527 223 and had problems with my bolt. You’ve gained a loyal follower.. Thanks

@ZRUSOutdoorsChannel Год назад

Right on man, glad I could help! Thanks for the follow!

@guhcdn 2 года назад

Thank you for the tip! Didn't end up needing a screw driver and ended up just bending it with my hands. Was a bit difficult to slide it on afterwards but it once assembled worked like a dream with little to no slack.

@exred1000 2 года назад

Thanks for a great video, recently got myself 527 in 7.62x39, it has the smoothest bolt ever no binding no slap. Then bought 527 in .223 the bolt a bit sloppy and binding too, I did your procedure it did helped with the slap, but it feels as binding got worse. I may going to take it to gunsmith to take care of it, rifle is 18 years old. My 7.62x39 bolt smooth as butter just like on CZ Bren. Also got a couple of tactical bolt handles from Glades armory to clear my scope, it worked great on .223, but won't go into 7.62x39 bolt.

@MRRizwan8074 2 года назад

Thank you so much…my 527 was binding and now it is buttery smooth

@user-pw1fr9rf8t 7 месяцев назад

Had the same issues with my CZ. Followed your instructions and solved my issues. Dissappointed that CZ quality control allowed their guns to leave their factory with these issues issues...bolt and magazines.

@bbbb1989ful 2 года назад

Thanks for this video, improved my 527 tremendously! To anyone struggling to replace the extractor after removing - stand the bolt vertically on your bench. With the right technique I can reassemble in 15 seconds.

@ZRUSOutdoorsChannel 2 года назад

Glad it helped! thanks for watching!

@harrydick3300 2 года назад

Rifle is shit, had mine for 7 years the stock broke (common issue.) No wonder cz is constantly discontinuing their rifles

@ratagris21 3 года назад

Great video. You can pretty much do this to any rifle with this type of bolt set up as well.

@Bert2368 2 года назад

My CZ527 7.62x39 carbine bound at first. I didn't modify the extractor. I DID apply a little bit of "bore paste" (very fine abrasive in heavy grease, sometimes used on new rifle barrels to smooth/de burr bores or clean stubborn deposits from used barrels) on all the bolt surfaces which showed a wear pattern from cycling, then cycled the bolt a couple of hundred times. I was very careful to keep any of this bore paste OUT of the trigger mechanism- I ran the rifle upside down and did NOT pull the trigger while working bolt. Then I VERY thoroughly cleaned any bore paste from bolt and bolt way/lug engagement surfaces & re oiled. I cleaned up and smoothed magazine feed lips. Didn't do anything to magazine spring, just cleaned, oiled & reinstalled. No more binding issues. I've got a new CZ527 .223 synthetic stocked "American", the version with a 3 round magazine and the magazine well extension reduced to give a flush fitting magazine. It is a jam-o-matic out of the box, going to look at the extractor & probably do some work on bolt & feed lips as above.

@Fehrman21114 2 года назад

Same problem with my CZ527. I love some of today's firearms. You have to play amateur gunsmith to get a brand new gun to work the way it is supposed to. On the off chance that CZ reads this, I 'd be willing to pay more if necessary for you to actually finish the gun completely before it leaves the factory. Beware when people say, "it's a good gun for the money."

@richcollins3490 2 года назад

That extractor is tough to get in for sure and that for me took the most time. All your tips did make a big difference in making this work better. Seems like the cz bolt tolerance guy fell asleep on the job. My other bolt action rifles have very tight tolerances which helps the bolt to glide effortlessly with just a small film of oil. The cz rifle could be so much better with that one little tweak, that being said it's still fun to shoot.

@TheProHunting 2 года назад

Ive had 4 CZs, always amazing, however, I had accepted that this level of play, or the not 100 % perfect tolerance level, as part and parcel of CZ. It never bothered me really, but because ive seen this video it reawakened what id already known, and im definitely going to try it out. Currentoy i have a 550 .30-06 and a 455 .22LR. Both 9fvthem will definitely benefit from this little tweak

@michelpoivre6665 2 года назад

Thank you from Belgium for this wonderful video

@jbsports3422 3 года назад

Compressing the magazine spring helped my two in 17Hornet. I also polished the outside of the bolt body, to stop it jamming against the receiver. They're a clunky piece of kit out of the box.

@theAbstruseJuice 2 года назад

Thanks so much for sharing your knowledge and experience. I have a 527 that has some binding issues and I plan on trying out this solution as soon as possible.

@ZRUSOutdoorsChannel 2 года назад

No problem! Hopefully that fixes your problem, thanks for watching!

@hetzerluo 2 года назад

I don't know why CZ only pillar bedded the rear action screw. If anyone wants to add a pillar to the front I found this tube works as a charm: McMaster-Carr, 89895K617, Smooth-Bore Seamless 304 Stainless Steel Tubing 9/32" OD, 0.028" Wall Thickness You just need to cut a piece and slowly grind it to the proper length. Also to torque the action, I would suggest replacing the factory action screw using J&P Custom Products' hex-head ones. CZ uses M5 screws but the common ones we could find in McMaster-Carr are with 8.5mm or 9mm dia head. CZ's are 8mm and the head is only 3mm thick. So you have to get customized ones.

@RichieValentine 2 года назад

Dude thanks for this tip, I just did these little mods to my CZ 527. But good lord was it a challenge to get that metal piece back on track after bending it!~

@ZRUSOutdoorsChannel 2 года назад

Glad I could help

@bobcat9314 Год назад

Great tutorial..thank you for all your time and efforts....looking forward to taking my rifle apart again

@Hiddencomment007 12 часов назад

That's the sickest ammo saddle or whatever you call it

@TheBowhunterinNB 6 месяцев назад

My 527 5.56 has always run slick but I watched and liked anyway. Thanks

@mikeperry4109 Год назад

I found your videos very informative. I just bought a .223 used, and I'm having some issues. I look forward to your videos for help. Thanx, Mike P.

@ZRUSOutdoorsChannel Год назад

Hey, Mike, what kind of issues are you having?

@JorgeGarcia-lw7vc 3 года назад

Very resourceful and pragmatic! Great gun and video, thanks!

@ZRUSOutdoorsChannel 3 года назад

right on man, thanks!

@abrampl 5 месяцев назад

Thx for movie! I already got used (not so hard) cz 527 varmint .223rem with scope and specialized wood gun stock :D now I can clean this iron before I go to range!

@kingfish4488 2 года назад

Nice Good to know---so far no issues with my 527----Thanks

@paulunterweiser6763 3 года назад

Had this exact issue and your tip fixed it. Thanks!

@ZRUSOutdoorsChannel 3 года назад

Right on man!

@sebastianhabel7312 2 года назад

I don't know whether the Czech made rifles also have this issue (I guess yours is made in he US), but since I am interested in getting one of these rifles, this life hack is good to know. As always, your video has been very helpful!

@mckwilly 3 года назад

awesome tips, I've had mag lips on a couple different after market, put a decent scratch in my cases enough to catch a finger nail, lil 800 grit took care of it

@ZRUSOutdoorsChannel 3 года назад

thats sometimes all it really takes to make some of these things perform.

@MDR-hn2yz 3 года назад

Awesome video. Now if I could only find one of these rifles.

@ChromeArty 10 месяцев назад

That is some absolutely beautiful leather you have on there 🤌🏻

@user-or5he6eo7s Год назад

very good video and thanks for making it

@haroldgodwinson832 2 года назад

"this button right here": = bolt release, "the bottom piece" = bolt shroud, "this little piece right here" = the collar. 😁

@simonetofani6357 Год назад

Good job dude, usefull thanks

@Saventry Год назад

Thx for the tips. I bent the extractor and its better but the action is still catchy. using oil. will try grease.

@petermiller8634 2 года назад

I’ve got 3 CZ 527s in various calibers & find your videos really helpful, thanks for posting. Re the magazines feeding smoothly I’ve had to slightly bend the feed lips on my 22 Hornet to get the rounds feeding reliably but got there in the end.

@ZRUSOutdoorsChannel 2 года назад

good to hear! thank you for the good words!

@stephenoshea1166 Год назад

Thanks for this great video as well as trigger adjustment one!! Haven't got my 527 yet but getting the knowledge in place ready for when it comes. Looks to me, if you wanted to get the same result to the extractor on the bolt, without stripping you could push in a wedge slowly half way down where you want the arch and then squeeze the bottom end in with a grips of some sort using a cloth or bit of leather to prevent damage to the bolt? Seems feasible enough just from seeing on screen etc. Grease is king!!

@bigmountain8494 2 года назад

I also experienced some binding on a new 7.62x39 and looked for a solution. I do not like bending an extractor of the Mauser type because it will also increase the grip on the case. But I found the problem: it is the EJECTOR! Yes, that metal sheet piece pressed by a spring (too strong in my opinion) in a channel in the bolt. The bolt face (where the case rests had a VERY sharp edge where the cut meets it. That edge creates the binding when the bolt is to the rear and you start pushing it (visible if you look through the ejection port). Pushing the bolt (or jiggling) changes the angle the back of the ejector meets the sharp edge. I used a diamond file (w width of the cut) and rounded the sharp edge. I also rounded a bit all sharp edges between that cut and the lug in which it is cut. The ejector blade seem soft (I did not take it out yet, but I will polish it on the back edge that touches the bolt) and due to the very hard and sharp bolt edge it will jam. This is why some people resolve the issue by hundreds of manipulations or using abrasive paste (without knowing where it goes).

@DaDaDo661 2 года назад

Thanks, I cycled my action about 500 times with some force and it made it much better, but still existent. I might try the file/polish method

@hondasaurusrex6998 3 года назад

Great video as always. Did the mod the extractor. It was a b_tch to put it back. About 10 minutes and a ton of swear words of encouragement for the extractor to go onto the ring it finally went on. Been using a very light coat of grease on all the bolts on my rifles. Seems to stick better to the spot were you want it to work vs the gun oil were it goes everywhere. Stay safe and Well and keep those videos coming!

@ZRUSOutdoorsChannel 3 года назад

Right on, thanks! So the bend helped your action?

@Saventry Год назад

just had the same experience right now. with swear words. Better now.

@SamuraiSamoht14 3 года назад

Thank you!! I will give this a try. Currently I get around the binding by using my thumb to push directly on the center of the bolt so that it goes in smoothly.

@mosesjonathan1240 2 года назад

I dont mean to be offtopic but does someone know a trick to get back into an Instagram account? I was stupid lost my account password. I appreciate any tips you can offer me.

@jayceondean3768 2 года назад

@Moses Jonathan Instablaster :)

@mosesjonathan1240 2 года назад

@Jayceon Dean thanks for your reply. I found the site on google and im trying it out now. Seems to take quite some time so I will get back to you later when my account password hopefully is recovered.

@mosesjonathan1240 2 года назад

@Jayceon Dean It did the trick and I finally got access to my account again. Im so happy:D Thank you so much you saved my ass!

@jayceondean3768 2 года назад

@Moses Jonathan You are welcome xD

@stephenbrown5844 2 года назад

Excellent footage and thanks for the info my friend 😉👍

@ZRUSOutdoorsChannel 2 года назад

anytime! Thanks for watching!

@RickKerr 3 года назад

Took my CZ 527 Varmint 223 MTR back to the gun shop where I bought it today, and had a certified gunsmith look at it. I have done exactly what you recommended and it still a pain to put a round in the chamber. He agreed, way too much slop in the bolt. However, if you put your thumb down close to the bolt center or center axis, it seems to push the round in okay. Tim, at the Military Arms Channel, had the same problem with his 762 x 39 527. The gun shop is sending it back to CZ under warranty. I will advise whenever CZ sends it back. I bought this rifle new in 2019 and have only put 100 to 200 rounds through it.

@PhantasyKingpin 3 года назад

Any update? I’m considering sending mine back to CZ as well, the fix in this video did improve the binding issue but nowhere close to my satisfaction and frankly, I don’t think it’s acceptable for them to send out so many rifles that will not feed. The good news is it’s a damn fun and accurate little rifle when it isn’t being a pain in the ass.

@NZ-Culler Год назад

I have a CZ 527 .222 I bought when I was 17 years old and culling wild goats/deer and pigs in New Zealand, I just had to put a new barrel on recently as the original one was worn out I never ever had any issues with the actions being smooth but the gunsmith said mine being one of the original ones was built to a better standard compared to the new ones CZ are making.

@user-rw8dh3et1y 4 месяца назад

Hi From Whangarei nz would like to know who how you got a replacement barrel for cz527. My has had lots of rounds so wont be long. cheers

@krod2162 2 года назад

My 527 in 204 Ruger did the same binding I took it back to the gun shop talk to the gunsmith he tried the bolt several times and it snagged on him and he had a weird look on his face so he tried it a few more times and a snagged again he had the weird look on his face again then he hands me the rifle and says there's nothing wrong with that rifle and walks away so I went home and took all the grease and oil off the bolt and cycled it like a thousand times and after that I put grease on it and it's smooth as silk now it works perfect also my magazine wasn't cycling rounds into the chamber then it caused me to miss a bobcat I heard a click instead of a bang but I just stretched the spring on the inside of the magazine and now it's perfect also

@TheProHunting 2 года назад

Very nice Sir.

@jasonforester4572 Год назад

THANK YOU!!! I bought a CZ 527 7.62X39 about a year ago because it had the most beautiful stock I've ever seen! Seriously, you should see it! So imagine how disappointing it was when the bolt wouldn't operate correctly. Major binding. So I did some research. Found out that others had come across the same problem. Some people figured it out correctly, but their solution was to send the rifle back to CZ to get the bolt (extractor) fixed. I sure didn't want to do that. I was happy to find your video with your solution. I tried it. And it worked like a charm!!!! No binding at all anymore!!! This little carbine shoots as good as it looks! Thank you so much!!!

@ZRUSOutdoorsChannel Год назад

Right on man! Thanks for the comment! Good to hear!

@mohdhafizzudin3053 Год назад

PDRM VAT69 2

@thelongestday64 2 года назад

Great advice!!!

@ZRUSOutdoorsChannel 2 года назад

thanks for watching!

@gorancvijovic2635 3 года назад

Thx, brother. Big help.

@ZRUSOutdoorsChannel 3 года назад

anytime!

@josephsoltes1250 3 года назад

Nice job

@hawknives 3 года назад

Thanks for the Tip and Trick!

@ZRUSOutdoorsChannel 3 года назад

anytime!

@croma9000 Год назад

I did not have any binding issues and did this just to smooth up the action on my 762. Unfortunately this resulted in failure to extract in below freezing conditions and I didn’t realize this until I was taking shots at a buck and doe. Had to manually remove the casing 3 times but still got them both. I’m hoping if I bend it back it will remedy.

@eltenda 3 года назад

Interesting! Nice rifle too!

@ZRUSOutdoorsChannel 3 года назад

thanks!

@ssrc30 2 года назад

The 527 looks so much easier to work on than my Ruger. Taking the bolt apart on my American Ranch is a pain in my ass. Gonna have to pick up a 527 I think.

@peterv9492 Год назад

Why not a rifle that has no issue to begin with? lol

@ozcountryliving4751 3 года назад

Good video mate. Cheers

@ZRUSOutdoorsChannel 3 года назад

Thanks 👍

@ryanmiller327 Месяц назад

I went and got the new bolt and tried bending it. Definitely gave it more clearance on the scope however it still is not very smooth. Love the look of the 527 but that bolt is horrible. Definitely would spend the extra money and get a tikka or sako if you want flawless bolt action. Although the new cz I looked at the other day looks like they finally corrected this mess.

@ZRUSOutdoorsChannel Месяц назад

It seems to be only the 223/556 527 rifles. I havnt heard many issues with any other calibers for the 527

@thomasjohansen8152 2 года назад

What kind of pouch and sling u have there? Great vid btw : )

@anthonykhalil70 11 месяцев назад

Thx

@markr5132 Год назад

Bad advise, grease gets gunked up. take 1000 grit sand paper to knock off the high spot of the bolt and then take "Never Dull" and polish it. then wipe with cloth that has been very lightly treated with mineral spirits=no gunk and an even smoother bolt.

@tommygun6028 2 года назад

Great info 🤝👍✋

@ZRUSOutdoorsChannel 2 года назад

Thank you!

@bearly1727 3 года назад

I would love a complete bolt disassembly/reassembly video. My 527 has been binding and I've polished everything in sight but this is the first video that will take me to the next step. I would love to clean under the 'ring' that holds the extractor as well but I don't know how to remove it. Please help some more. Love your videos.

@ZRUSOutdoorsChannel 3 года назад

pretty sure you can simply pry that ring off by opening it up enough to pull from the bolt.

@bearly1727 3 года назад

@@ZRUSOutdoorsChannel Thank You . Sounds like it will be 'fun' putting it back on, lol.

@ZRUSOutdoorsChannel 3 года назад

@@bearly1727 lol you are probably right..

@bearly1727 3 года назад

@@ZRUSOutdoorsChannel Well I didn't take the ring off. With the extractor removed I realized that by rotating the ring I could really clean quite a bit with Gun Blaster and Q-Tips. I then gave it some grease and it almost spins around. Bending the 'leg' like you showed also made a huge difference. Thanks again.

@ZRUSOutdoorsChannel 3 года назад

@@bearly1727 right on man! good to hear! happy shooting!!

@terryqueen3233 3 года назад

Where did you get that rear sight that's the second time I've seen one and I have fallen in love with them I hope you can tell me have a great day and stay safe! TQ out

@ZRUSOutdoorsChannel 3 года назад

its made by NECG. Heres my video on it. : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x_0auIVKWH8.html

@drewsmith5581 3 года назад

What sling is that? Great vids on the 527 I have 2 and one of them has every problem. Bolt binding, light striking, tight mags, and the hole for the bolt handle is super tight had to polish the glades armory bolt handle ( thanks for that video as well) to fit. But I still love it.

@ZRUSOutdoorsChannel 3 года назад

Here ya go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@Clint_Girthwood Год назад

Where did you get that leather stock pouch? Thing looks sweet

@joeedwards5007 Год назад

Thanks

@ZRUSOutdoorsChannel Год назад

thanks for watching!

@sasquatchycowboy5585 2 года назад

Man CZ really grabbed mediocrity from the mouth of greatness with this rifle. Flip the damn safety around, and put some quality control in place with the action. Those two things and you have something.

@williamzuk6661 3 года назад

does anyone have data on the range/accuracy between the available barrel lengths with 7.62 version

@gregt5996 3 года назад

Love my CZ 527 MTR .223 but unhappily dealt with this issue since day one. Using the thumb push bolt closing method worked but thats a band aid if you ask me. Contacted CZ and went back and forth with them not satisfied with their answer "Thats the way the mini Mauzer action operates"... Bull crap ! 5 minutes watching your video and problem solved. Thanks !

@ZRUSOutdoorsChannel 3 года назад

That’s a BS answer for sure, my 7.62x39 runs very smooth. Glad the video helped ya!

@gregt5996 3 года назад

@@ZRUSOutdoorsChannel I may get myself the 7.62x39 527 as well, good inexpensive round. My 527 MTR .223 target version will not shoot cheap steel ammo without the case jamming in the chamber. The 7.62 ammo has a different case profile that doesn't get stuck in the chamber.

@peterv9492 Год назад

haha, sounds familiar. My gunshot said: That's what you get with a cheaper gun, followed with a couple of suggested more expensive brands...

@gregt5996 Год назад

@@peterv9492 My CZ 527 MTR cost me a bit over $800, maybe that's not an expensive rifle but I would not call it cheap. CZ makes some fine firearms. It shoots just as tight groups as more expensive rifles, and the trigger is very good right out of the box, and the Turkish walnut stock is gorgeous ! I wanted something that I could practice with that the ammo didn't cost me a fortune. I had the chance to pick up and dry fire a CZ 557 MTR chambered in .243 and the action was as smooth as glass, so I assumed the .223 version would be the same..no so. The .223 is a smaller rifle and unfortunately not as smooth as the .243 and the .308 chamberings. Oh well live and learn. Anyway after making these adjustments to the bolt and allowing break in time my .223 version shoots and cycles just fine. You can't shoot cheap steel cased ammo because of the tighter chamber tolerances of the MTR target version the casings tend to get stuck in the chamber after firing requiring a rod down the barrel to push them out. Also the tight chamber is sensitive to head space issues of the cheap Chinese and Russian ammo, but I have yet to have any problems with any brass cased ammo. The rifle is now discontinued by CZ. It gets a lot of looks and comments at the range..I fitted it with an old Brno target rifle diopter rear sight and Anschutz front globe sight. It will drive tacks at 100 yards. I really enjoy shooting it.

@peterv9492 Год назад

Can't wait to do this!!! I hate my 527 for this particular problem. Never understood why the factory never fixed it. The bolt handle is also painfully close to my scope, resulting in the bolt handle being to short to cycle it. Any ideas? Can you buy longer bolt handles separately?

@ZRUSOutdoorsChannel Год назад

here ya go! : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zwl3UZaR5y0.html

@zacharygifford1822 2 года назад

Where did you get that mosin pouch?

@USMCSDI 10 месяцев назад

I have had round feeding issues with my CZ527 7.62 since the day I got it and I cannot figure HOW to fix it. Even a gunsmith I took it to had NO IDEA. Is it the magazines? I am using stell cased Wolf ammo

@user-rp8xj2fw7v 9 месяцев назад

Where can I find the Mag Spring for this.

@spraynpray Год назад

I had my cz527 built up a couple years back and finally got some primers so I can shoot it. I took it out and fired almost 100 rounds through it and noticed the firing pin was pretty unreliable. I just got home and checked. The rear action screw is too long and hits the cocking piece or cocking shroud AKA black bit on the back. I just shortened it and am going to try this as well as take a look at the firing pin because I had 5 popped primers back when I tried to use small rifle primers instead of benchrest small rifle primers. I'll report back. Update: this did nothing.

@skeet330 3 года назад

My 762 version works perfect but my 223 has the same issues. Not horrible but definitely not the same

@ZRUSOutdoorsChannel 3 года назад

seems to be the case with the 223 version more so than the 7.62x39

@toxicslix 2 года назад

What are you running on the butt stock and do the 5 rnd mags fit?

@TheClayCoKid 2 года назад

Where can I get one of those magazine pouches on the stock? Thanks for making this video. My gun hangs up a little bit

@ZRUSOutdoorsChannel 2 года назад

Check the link in the description box of the video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@johneckhardt7834 2 года назад

Mine (new out of the box) binds feeding every round (need to pound on the bolt to get it to move forward.) Will see how your advice works. But another issue I have is with the magazines. They are so stiff it take a Herculean effort to get the 4th and 5th rounds in. I have been considering cutting a loop off one spring and see if that helps.

@ZRUSOutdoorsChannel 2 года назад

Let me know how it goes.

@jacoleroux3662 2 года назад

I have the same problem. Did you get it fixed?

@aarontharris 3 года назад

@ZRUS Outdoors Channel what is that magazine bags / cheek riser setup on your stock? I'd love to get one of those. Thanks

@ZRUSOutdoorsChannel 3 года назад

Made by steel rain provisions. Search “steel rain provisions” on RU-vid and it will bring up my video on this.

@DaDaDo661 2 года назад

Will this work on a 557 in 308?

@gapster46 3 года назад

Interesting. Tho arthritis in my neck and shoulder have kept me from shooting my CZ 527 in 7.62x39 for a while, the bolt is rough and I hate the magazines. Tough to load the 4th and 5th rounds and sometimes the bolt won’t even pick up a round from the magazine. Feed lips feel smooth except for right at the front, but that’s an easy fix.

@ZRUSOutdoorsChannel 3 года назад

hey, Gapster. did you ever end up picking up the 223/556 model ?

@davidnovakovich5583 2 года назад

I had problems with every magazine, cartridges binding, so I took a large flat bladed screw driver, and after taking the mags apart, inserted it into the mags and then twisted it to spread the sides of the mag apart. I had to move it around inside the mags to widen the right spots, but haven’t had any problems since “fine tuning” them.

@gapster46 2 года назад

@@ZRUSOutdoorsChannel Odd. I never got the notification that you replied to me 8 months ago, but I did get the notification that David Novakovich replied just now. Anyway, I never did pick up a 223/5.56 model as the arthritis in my neck and shoulder has forced me to stop shooting rifles, with the exception of my .357 Magnum lever guns, shooting mostly .38's. I haven’t shot my CZ 527 in almost two years. It sucks, but the alternative isn’t acceptable.

@gapster46 2 года назад

@@davidnovakovich5583 The mags are the only weak link to this rifle. I don’t think I’d want to try a screwdriver in a mag unless I had a video showing me. Those things aren’t cheap.

@NZ-Culler Год назад

where did you get the longer/bigger bolt handle/knob?

@rufturbo997 Год назад

I was wondering the same and found he mentioned Glades Armory as the source. BTW, I found that a Howa 1500 bolt nob ($25) fits nicely.

@LIONTAMER3D 2 года назад

the 527 was divinely ordained in 7.62x39

@solomonkane223 2 месяца назад

Where did you get the magazine holder for your stock?

@ZRUSOutdoorsChannel 2 месяца назад

Steel rain provisions

@mavifeeyakier9593 8 месяцев назад

what brand is this stock puch..? looks cool

@ZRUSOutdoorsChannel 8 месяцев назад

It’s made by steel rain provisions : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.htmlsi=68ge-AUdzlPqM8rx

@kallummaitland8158 3 года назад

Mate, where did you get that cover for the rear stock. What brand is it? The pockets in it look good.

@ZRUSOutdoorsChannel 3 года назад

here ya go, bud! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@kallummaitland8158 3 года назад

@@ZRUSOutdoorsChannel legend! Cheers mate!

@310.outdoors4 3 года назад

Steel rain is a great dude!

@sthoseph Год назад

As much as those magazines cost the whole thing should come polished lol

@dcarson 2 года назад

Any problems with the type of grease you used and very cold weather? Like -20F? 0F? -40F? I’m not quite sure what can of grease you used. I can’t find non-white lithium grease.

@ZRUSOutdoorsChannel 2 года назад

I havnt been out with this one in those temps. But I’m my semi auto shotgun, it did experience problems here and there. I wouldn’t expect a boltaction to be as susceptible.

@statmech4u Год назад

does it still throw the brass more or less the same, after bending the extractor?

@ZRUSOutdoorsChannel Год назад

I didn’t notice a difference

@hawknives 3 года назад

Greetings ZRUS , I'm behind on keepin' up.....what ammo pouch do you have on that butt stock? I got the 7.62 x 39 mini Mauser. Thank You in advance! Christ Bless! Hawk.

@ZRUSOutdoorsChannel 3 года назад

here ya go, bud! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@hawknives 3 года назад

@@ZRUSOutdoorsChannel Thank You Much, Man!

@shayanshariatirad2065 3 года назад

Which grease do you use mate?

@ZRUSOutdoorsChannel 3 года назад

any heavy lithium car grease. Can be found at an auto parts store.

@user-mx9xb4tq1t 4 месяца назад

Скажите совместимы , магазины cz 527 223 rem c 222rem и 7.62×39 ?

@CREvothegreater 2 года назад

my 7.62 is fine but my 5.56 does bind.....

@bobdoingstuff4180 Год назад

Hopefully you respond to this being that the video is 2 years old... what is that magazine bag you have on the buttstock? I would love to get one for my cz

@ZRUSOutdoorsChannel Год назад

Here you go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@garypudup2109 Год назад

Where did you get the magazine pouches? I have both a 223 and 7.39 carbine and would like to add those to mine.

@ZRUSOutdoorsChannel Год назад

Here ya go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@garypudup2109 Год назад

@@ZRUSOutdoorsChannel Thanks. I too own CZ 527s in both 223 and 7.62 with the same rear sight you have on yours. I recently had to send my 7.62 back to CZ as the lip on the magazine catch inside the mag well had broken off. I was at the range and couldn't get the mag to lock in. When I got home I disassembled the rifle to find the lip snapped off. I contacted CZ, the sent me a shipping label and they replaced the latch. It took about 6 six weeks. The rifle is only two years old so it fell under the warranty. There is a "trick" to the proper reassembly of these rifles which the manual does not address. Do you have a video on the disassembly and reassembly of the 527? Thanks for the link.

@ZRUSOutdoorsChannel Год назад

@@garypudup2109 I do! It’s located in this video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BqcwFciaVbc.html

@garypudup2109 Год назад

@@ZRUSOutdoorsChannel perfect thanks. I struggled getting mine reassembled. Knowing to have a magazine in the well makes the difference. Not something you see on a lot of rifles. Thanks.

@joeedwards5007 Год назад

where DID YOU GET THAT SADDLE ?

@ZRUSOutdoorsChannel Год назад

Here you go, steel rain provisions : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E4C67pAM-ec.html

@NCrdwlf 3 года назад

Would you recommend this over the Ruger ?

@ZRUSOutdoorsChannel 3 года назад

Im not sure which Ruger model you are referring to ?

@ZRUSOutdoorsChannel 3 года назад

If you are referring to the Ruger American Ranch models, I say go with this CZ527. The only thing that the Ruger Ranch models have going for it is magazine capacity. The CZ is a much more refined rifle, the finish is better, beautiful wood stock, amazing fully adjustable trigger and set trigger, iron sights, no plastic. light weight, accurate, and chambered to shoot steel case. its a clear win for the CZ527 over the Ruger American Ranch.

@NCrdwlf 3 года назад

@@ZRUSOutdoorsChannel yea I should have clarified that . That’s was the one I meant . Thanks for the response !

@hawkeyeinthehouse2995 Месяц назад

Thank YOU For INTERESTING and INFORMATIVE VIDEO!!! I also have a CZ527 in 7.62X39 which I LOVE, GREAT RIFLE!! I'VE GOT A QUESTION, where did you get that REAR PEEP SIGHT?!!!! WOULD GREATLY APPRECIATE, I'M 71 and my EYE (only have one) isn't as good as it used to be even though I see stuff people overlook!!! I'm very visual and consistently panning my head left and right to make up for my LIMITED FIELD OF VISION!!! My nickname is Hawkeye if that gives you an idea of my shooting prowess!! I show my shooting buddies my targets and they say "REMIND ME NOT TO PISS YOU OFF!!!🤣😂🤣😂 Don't worry it takes A LOT to PISS ME OFF!!! JUST DON'T F--K WITH MY ONLY GOOD EYE, JUST THAT SIMPLE!!!😉😁👍

@ZRUSOutdoorsChannel Месяц назад

Company called NECG ( New England custom gun)

@hafizaz-9858 Год назад

G27

@rexhavoc2982 3 года назад

While the bolt handle is off, bend it flatter for more scope clearance.

@ZRUSOutdoorsChannel 3 года назад

I actually have a Glades Armory bolt handle that has plenty of clearance for scope ;)

@the.tricky.outdoorsman 2 года назад

Hey Z, I'm still having issues with rounds feeding. It's like they are getting hung up on the top lip of the mag. I've tried filing down the inside of the mag. I've sprayed the inside with graphite lube. Rounds are still sticking. What should I do?

@ZRUSOutdoorsChannel 2 года назад

How many mags do you have? is it the same issue in all mags? and how many rounds can be in the mag before you experience a repeatable issue? I.E. can you successfully cycle 1 round loaded, then 2 rounds loaded then 3 then 4-5. the magazine spring can be stretched or compressed to change the feeding. If you are experiencing issues on a full mag, you may need to compress the mag spring and reinstall it. Also, some springs are bent upwards at the top front where the nose would be, this bend may need bent upward more to prevent nose dive. effectively angling the bullet upward.

@the.tricky.outdoorsman 2 года назад

@@ZRUSOutdoorsChannel so I can only load one round before the problem starts. If I load five once I get to the first to last round cycling starts getting easier. I only have one magazine at the moment. It's very difficult to find them. I'll definitely try what you suggested and get back to you

@the.tricky.outdoorsman 2 года назад

@@ZRUSOutdoorsChannel just tried compressing the spring and re-installing it. Not much difference, even loading the mag the rounds get stuck. The rounds get small gouge marks on the casing.

@ZRUSOutdoorsChannel 2 года назад

@@the.tricky.outdoorsman At this point i would suggest contacting CZ.. No one ever wants to, but they will take care of you..

@the.tricky.outdoorsman 2 года назад

@@ZRUSOutdoorsChannel darn, well I guess they may send me a new mag or something.

@terryqueen3233 3 года назад

Dude can you not tell me where you got that rear sight?

@ZRUSOutdoorsChannel 3 года назад

lol i replied to your question before this one already (scroll down) but heres what i replied to your last one : "its made by NECG. Heres my video on it. : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x_0auIVKWH8.html "