Fixing One of Ford 7.3 Powerstrokes Biggest Problems: Fuel Bowl Rebuild Part 2

Подписаться 25 тыс.

Просмотров 16 тыс.

50% 1

Fuel bow rebuild for my ford 7.3 Powerstroke. Also using a billet fuel pressure regulator.
Oring Kit: www.riffraffdiesel.com/comple...
Billet Regulator: amzn.to/2WSP8cy
Fuel bowl Heater: www.riffraffdiesel.com/fuel-b...
Parts:
S&B Intake: amzn.to/2PdVb63
Headlight Assemblys: amzn.to/2B9E2no
Projector kit: www.theretrofitsource.com/bi-...
Hostile Sprocket: amzn.to/2Z9SHMH
Goodyear Duratracs: amzn.to/2KLtcIk
Emblems: amzn.to/31eZi68
Polisher: amzn.to/33iUP4e
CNC Lines: cncfab.us/i-30497598-cnc-fabr...
AIH Delete Plug: www.riffraffdiesel.com/aih-de...
Waterless Wash: amzn.to/2M5GtiT
6637 filter: amzn.to/2EtuhSO
Air filter tube: amzn.to/2VXXtfB
4" Exhaust: amzn.to/2VItdjR
CNC 4 line kit: cncfab.us/i-30497599-cnc-fabr...
CNC Oil Crossover: cncfab.us/i-30497596-cnc-fabr...
CNC Fuel bowl delete block: cncfab.us/i-30497604-cnc-fabr...
Airdog 165: amzn.to/2M41RoY
Fuel Tank Sump: amzn.to/2M7JjnE
Stage 1 Injectors: www.riffraffdiesel.com/allian...
Edge CTS Insight: amzn.to/2ErkHQl
EGT probe: amzn.to/2EsHF9O
Window Mount: amzn.to/2EqiLHO
Pressure Sensor: amzn.to/2wd472h
Sensor dongle:amzn.to/2WoEees
Hydra Chip: 1023diesel.com/php-hydra-cust...
17+ Tow Mirrors:
1) amzn.to/2xkXJcV
2) amzn.to/3aiBWBC
Rigid Fog Lights: amzn.to/2M1ar7I
Smoked Tail Lights: amzn.to/2Es7PcS
LED Brake Lights: amzn.to/2YJv21L
LED Reverse Lights: amzn.to/2W3gVrz
Smoked Headlights: amzn.to/30GMKFh
Music:
Tobu - Nostalgia
/ tobuofficial

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@chemsrus4914 4 года назад

If I could buy you a beer I would. Awesome video. I bought the riffraff fuel bowl re-seal kit and used your video to assemble the whole project. Went in like a charm with no problems. I was working remote in Alaska and next thing I know I started leaking diesel from the back end of my fuel bowl right at the drain valve. Patched it up with the tightening of a screw which fixed the problem but I knew it needed some love. Your videos really helped my through the process exponentially. Clear explanations, with visual perspective made the job a cake walk. Riffraff is always my go to when it comes to my 7.3, and people like you really keep things going with a simple run down of the basics. There are a lot of how to, DIY videos out there but the quality and detailing of your videos really makes the difference. Thank you, and cheers!

@LivingOnWheels 4 года назад

I really appreciate it man! Super glad to hear it helped out!

@AlphaZuluPhotography 8 месяцев назад

A tip for the heating element is to leave it connected and remove the water / heater sensor and pull it out slowly. There’s enough wire to disconnect it outside the bowl. And when putting it back together put the wire through the hole and connect it to the sensor outside the bowl. Then pull the wire in as you install the sensor back.

@wordsofhis1799 4 года назад

I look at A LOT of 7.3 diesel vids, as I'm learning myself, I'm saving this one in my favorites, as I know I'll refer to it someday> Thanks for your work on this!

@LivingOnWheels 4 года назад

Glad its helpful!

@edburns8124 3 года назад

Great vids - Thanks man I appreciate it. First time I've tackled this job and you made it seem very straightforward. Everything clearly pointed out on the videos and great descriptions too.

@tylerwerner6413 3 года назад

You are awesome! Going to be putting an Adrenaline HPOP in my truck and figured while I have the fuel bowl out I might as well reseal it. I couldn't ask for a better video on how to rebuild it!

@LivingOnWheels 3 года назад

Glad to hear it man!

@toddb930 Год назад

Man, dude, these two videos were excellent! I have a 7.3L diesel that has bern leaking fuel for a long time. I was thinking I would need a mechanic to fix it but with your video i think i can do it. Thank YOU Sir!! 👍😁👍

@LivingOnWheels Год назад

Glad the video helped!

@user-rx5tn8dv7y 6 месяцев назад

Thank you for the excellent tutorial!

@BrandonC610 2 года назад

Thank you very much for the thorough video! Well done, detailed and clear. Appreciate you showing things and taking your time.

@bobdurhan3429 3 года назад

Love my first 7.3! And you make it just that much easier to own. I wouldnt go back to my 6.8 gas hog for nothing. Thanks Living on wheels from Bob D here in omaha neb!!!

@davidgallegos5323 2 года назад

DUDE YOU ROCK WITHOUT THIS VIDEO I MIGHT NOT HAVE GOT THUR DOING IT KEEP ON ROLLING BROTHER

@LivingOnWheels 2 года назад

Glad it helped 👍🏻

@craigcricket7932 Год назад

Thank you. I'll be doing the drain valve only. It's a tight fit. I'm thinking, put the screw in, flush with the inside surface. Dab some gasket sealer on the out side thread. Let it set up. Then when positioning it the screws won't fall out. Once they are threaded I can peel off the gasket sealer for a snug fit. Pulling the bowl off like you did, makes more sense. I'm hoping to cut a corner which usually doesn't go well.

@markfalcon5949 Год назад

Just completed watching both videos. Kudos for taking the time on your rebuild and who to buy items from. Now if I can get the parts quickly and R&R the fuel bowl I will be good to go. Thank you for the quick reply, very, very much appreciated!!!!

@davidmanderson8337 3 года назад

Thank you for the video. I appreciated the name of the company for obtaining the seals. I’ll be calling tomorrow.

@samandbritt224 4 года назад

Just for anyone's curiosity, the stem in the middle CAN be gutted with no negative repercussions as long as you don't run your truck without a bowl filter. The guts in that stem only serve to block fuel flow if there is no filter present, and I noticed a bit of a fuel flow gain in my system after removing the plunger, base and rod. Not to take away from your video because I realize this is not a mod video it's a rebuild video but anyone who is interested, that is a mod you can do during a bowl rebuild, or if you just happen to have the time when you change the filter.

@LivingOnWheels 4 года назад

Good info!

@peteflores7031 Год назад

Great job, I have been wanting to rebuild mine. I think I will watch this a few times then I will tackle it. Loved your video.

@LivingOnWheels Год назад

Glad it was helpful! This was my first time on it and it wasnt bad at all.

@redcloud870 2 года назад

Enjoy your videos Kid. Keep them coming!

@samlaymon7160 2 года назад

Great video just rebuilt my fuel bowl using this video thanks.

@traderryan713 2 года назад

Good video for a newb learning. Thanks for the info.

@user-vi4cb4gh9u 10 месяцев назад

Great video! Thanks!

@markfalcon5949 Год назад

Straightforward explanation. I was trying to hurry due to sun setting, and after rewatching your video again, I placed the spring for the fuel inlet valve in the wrong position. So tomorrow hopefully I can remove the filter, the heater and that tower where I put the spring in the wrong position. My spring was kind of bent up, so I slowly and carefully straightened it out as best I could. How it got so bent, I’ll never know. I am starting to go through it weather permitting. My first diesel,so it’s all a learning curve. Keep ya posted on how it turns out😊😊

@davidpowell3614 3 года назад

Nice work. Thanks

@richardlormand4156 Год назад

Great video, thanks

@frankvacanti5277 Год назад

Another nice video extremely helpful. You need to get a teaching certificate. I just did one of these fuel bowl reseal. I left the check valve out of the center standpipe I think I'll be putting a fuel filter in they don't think I would ever not put a fuel filter in every little bit of flow helps. Thanks for the help keep it up.👍

@LivingOnWheels Год назад

Glad it was helpful!

@paulpugh2480 Год назад

Good job.

@javiermarante5344 4 года назад

Will definitely be doing this bc my fuel bowl is leaking like crazy, and I have some diesel on my engine valley!! Thank you for the video

@LivingOnWheels 4 года назад

Glad the video will be useful!

@stevenkelble5248 3 года назад

very well done thanks

@craiglowe2049 3 года назад

good video sir very helpful. my first ford truck dont know jack about them

@fredtew4162 4 года назад

Thanks great video .very helpful

@LivingOnWheels 4 года назад

Fred Tew thanks for watching!

@joshuascritchfield4397 Год назад

Joe your the man

@tiffanybrown7882 2 года назад

Thanks alot preciatte ya

@MotoGPatrick 3 года назад

Compatible oil is the right way to lube fuel o-rings. In aviation, an oil system oil ring gets lubed with oil, Hydraulic with hydraulic fluid but fuel system o-rings get petroleum jelly or an oil typically.

@josephcirelli9642 4 года назад

I know you didn’t have to do it but content, content, content! Lol. I have a 6.0L so this didn’t help me but of course, I watched all the way to the end. I’m sure this video will help a lot of 7.3L out there! Definitely sounds like something to do as preventative maintenance as our trucks age. I’m looking at possibly frame to body mounts. Oh fun times! Have you ever thought of giving away your not needed parts as a way as getting more subscribers? I’ve seen other channels do it as milestones. It’s just a thought. As always, I’ve learned something new & possibly will look at my fuel bowl. Although, last year I did the blue spring kit with great success. Thanks again for all you do making your videos and look forward to seeing your next video!

@LivingOnWheels 4 года назад

I have thought about doing it and I do plan on doing give aways as the channel grows.

@RX7GSLSEowner 4 года назад

Are you ever gonna make that detailed fuel system video? :D

@jeffread3388 2 года назад

Hi. Good video. Suggestion. Make sure you have your volume up when recording. I have volume up 100%, but you have a soft voice, so it was hard to hear you and I'm watching inside my rig with the engine running. Also, need video on how to access and remove the fuel bowl. Let me know if you have that or suggest a good one. And, I guess you did the fuel bowl delete, so I can use a good video on doing that. After seeing all the work involved to rebuild the fuel bowl, I think I rather do the delete and get rid of the whole dang thing. Good job. Thanks. JR

@frankvacanti5277 Год назад

Is it necessary to put something in place of the yellow stuff that they use? Or just rely on the O-rings

@PocketsIRL 6 месяцев назад

The o rings on the fuel inlets and outlets do you just stuck them in the brass and then put the lines in after and smash them down or do u put them on the flared lines and thread them in?

@LivingOnWheels 6 месяцев назад

They go on the flared lines and the nut threads over them.

@oggarage3459 3 года назад

Hey bro I started doing this on my 7.3 fuel bowl yesterday and I stop when I came across the 2 fuel fittings where you used loctite 545,I can't for the life of me find it at the local stores , is there any other sealant I can use ? Thanks

@LivingOnWheels 3 года назад

I don’t even remember if the directions even call for sealant on those. You could check Riffraffs website. You might have better luck finding an oil or fuel rated Teflon Tape. Just be very careful to not have it overhang the threads. You don’t want any getting into your fuel rails.

@frankvacanti5277 2 года назад

I would have just removed the whole check valve on the fuel filter I don't think anybody would run or not run a fuel filter. I don't know I've seen a couple different videos on removing that what do you think?

@LivingOnWheels 2 года назад

I’ve heard of people doing it but I don’t think it’s much of a restriction.

@kensouthard7325 4 года назад

Are you offering to sell the rebuilt bowl? How Much? Nice video. The Voice over worked well.

@LivingOnWheels 4 года назад

I am selling it. Have had a couple people reach out to me already. I will let you know if it doesn’t go their way.

@kensouthard7325 4 года назад

@@LivingOnWheels Thanks. Your videos are helpful. I recently got a 2000 F350 with 46k miles and am trying to enhance its reliability by doing some maintenance before they become breakdowns.

@JakePearce226 3 года назад

Just replaced my entire bowl and water separator on my 98 E350. But now getting tons of white smoke. Could it just be air in the system ?

@LivingOnWheels 3 года назад

No, that does not sound like air. Sounds like and injector issue. I'd say either bad O-ring, stuck injector or broken tip.

@JakePearce226 3 года назад

@@LivingOnWheels I’ve never had this issue until I replaced the bowl assembly

@LivingOnWheels 3 года назад

@@JakePearce226 Perhaps you got some junk in one of the lines?

@JakePearce226 3 года назад

@@LivingOnWheels I’m thinking so. Let it run for about 20/30 mins and it’s 99% cleared up.

@LivingOnWheels 3 года назад

@@JakePearce226 Good to hear that. Probably wouldnt hurt to run some nice fuel system cleaner through it too. Like some hotshots or Archoil. amzn.to/36eAZtL amzn.to/39knpar