Focusrite Scarlett 4i4 (3rd gen) Review & Loopback Setup

Подписаться 125 тыс.

Просмотров 61 тыс.

50% 1

In this video, I will be doing an honest review and unboxing of the Focusrite Scarlett 4i4 third-generation USB-C audio interface. The Focusrite Scarlett 4i4 is a USB-C-powered audio interface with 4 inputs and 4 outputs.
I will show you how to set up this audio interface, and go through all its functions, as well as the software functions, including loopback setup. I'm using FL Studio in this video, but this works in other DAWs too.
The Focusrite Scarlett 4i4 3rd gen brings some new and useful features over the previous model. Here are some of the key features:
The Scarlett 4i4 (3rd gen) brings a new feature to the Scarlett lineup and that's Loopback. This is a software/digital input that allows you to bring in any software on your computer (ex: Skype for podcast interviews) and record that input onto its own separated channel in your DAW.
The third generation Scarlett 4i4 now comes with USB-C as standard.
The preamps of the 4i4 have also been improved and provide more gain compared to previous models.
The air and pad feature is still there, although it has been moved into the software instead. The physical buttons are no longer found on the front of the audio interface.
This is going to be an honest review after using the Scarlett 4i4 audio interface for more than 6 months. I made sure to shoot the unboxing when I first got it, so I've included that in the video as well. I'll cover all the pros and cons of this audio interface, based on my experience with it over the past 6 months.
Scarlett 4i4 key features:
Connection: USB-C
Input/Output: 4x4
A/D-resolution: 24-bit/192 kHz
Preamps: 2
Phantom power: Yes
Instrument inputs: 2
Line inputs: 2
Analog outputs: 4
Headphone output: 1
Bus-powered: Yes
Loopback: Yes
Midi I/O: Yes
Dimensions: 47,5 X 185 X 119,7 mm
Buy the Focusrite Scarlett 4i4 here:
(Amazon link)
☑️ Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4
If you don't need a lot of inputs and outputs, you might want to check out the cheaper Scarlett Solo instead:
☑️ Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen
------------------------------------------------------------------
RECOMMENDED STUDIO GEAR:
(Amazon links below)
REFERENCE HEADPHONES:
☑️ AKG 612 PRO: geni.us/akg-k612pro
☑️ Beyerdynamic DT 990 PRO: geni.us/DT-990-pro
BUDGET MONITORS:
☑️ 5": Yamaha HS5: geni.us/Yamaha-HS5
☑️ 7": Adam Audio: geni.us/Adam-Audio-T7V
☑️ 8": Yamaha HS8: geni.us/Yamaha-HS8
PROFESSIONAL MONITORS:
☑️ 7": ADAM Audio A7V: geni.us/ADAM-A7V
SUBWOOFER:
☑️ KRK 10S2 V2: geni.us/krk-10s2v2
MICROPHONE:
☑️ Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone
☑️ Vocal recording booth/stand for microphone: geni.us/microphonebooth
XLR CABLES:
☑️ TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m
☑️ Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761
SHORTCUT KEYBOARD:
☑️ Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard
☑️Get The Complete Idiot's Guide To Music Theory Here:
geni.us/idiotsguidemusictheory
As an Amazon Associate, we earn from qualifying purchases.
------------------------------------------------------------------
✔️ VST & Effect Plugins:
pluginboutique.com/?a_aid=5d4...
✔️ Premium Loops And Sample Packs:
www.loopmasters.com/?a_aid=5d...
------------------------------------------------------------------
00:00 introduction
00:11 Focusrite Scarlett 4i4 unboxing
00:37 Scarlett solo vs Scarlett 4i4
00:58 Scarlett 4i4 key features
02:52 Scarlett 4i4 Software Setup
02:58 Focusrite Scarlett 4i4 loopback setup
04:16 Focusrite AIR function explained
04:42 Focusrite PAD function explained
05:00 Focusrite Scarlett 4i4 technical specifications
05:16 Conclusion - Scarlett 4i4 Pros / cons
#firewalkmusic #scarlett4i4 #musicproduction
Check out my mixing and mastering tutorials:
• Mixing And Mastering E...
FL Studio tutorials: • How To Sync Samples To...
FL Studio quick tips: • How To Replace Samples...
❤️ Support this channel on Patreon:
/ firewalkmusic
❤️ Support us with a one-time PayPal donation:
www.paypal.me/firewalkmusic
🎹 Do you need professional feedback on your music? Or perhaps mastering? Check out my gigs on Fiverr: www.fiverr.com/firewalk
Follow FireWalk on social media:
/ djfirewalk
/ djfirewalk
/ firewalk_music
/ firewalk_music
📧 Business inquiries:
firewalk.official@gmail.com

Видеоклипы

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 122

@FireWalkMusic 2 года назад

Buy it on Amazon: ☑️ Focusrite Scarlett 4i4 (3rd Gen): geni.us/scarlett-4i4 If you don't need a lot of inputs and outputs, you might want to check out the cheaper Scarlett Solo instead: ☑️ Focusrite Scarlett Solo: geni.us/scarlettsolo-3rd-gen ✔ VST & Effect Plugins: pluginboutique.com/?a_aid=5d496680b59cd ✔ Premium Loops And Sample Packs: www.loopmasters.com/?a_aid=5d496680b59cd 🎹 Do you need professional feedback on your music or perhaps mastering? Check out my gigs on Fiverr: www.fiverr.com/firewalk -------------------------------------------------------------------------------- RECOMMENDED STUDIO GEAR: (Amazon links below) REFERENCE HEADPHONES: AKG 612 PRO: geni.us/akg-k612pro Beyerdynamic DT 990 PRO: geni.us/DT-990-pro REFERENCE MONITORS: 5": Yamaha HS5: geni.us/Yamaha-HS5 7": Adam Audio: geni.us/Adam-Audio-T7V 8": Yamaha HS8: geni.us/Yamaha-HS8 SUBWOOFER: KRK 10S2 V2: geni.us/krk-10s2v2 MICROPHONE: Audio-Technica Cardioid Condenser Studio XLR Microphone: geni.us/at2020microphone Vocal recording booth/stand for microphone: geni.us/microphonebooth XLR CABLES: TISINO 35 ft Balanced XLR cable for mic: geni.us/xlr3ftoxlr3m Monoprice 6 ft Balanced XLR Cable for monitors: geni.us/monoprice104761 SHORTCUT KEYBOARD: Backlit FL Studio Shortcut Keyboard: geni.us/flstudio-keyboard Get The Complete Idiot's Guide To Music Theory Here: geni.us/idiotsguidemusictheory As an Amazon Associate, we earn from qualifying purchases. ❤ Support this channel on Patreon: www.patreon.com/firewalkmusic ❤ Support us with a one-time PayPal donation: www.paypal.me/firewalkmusic

@aemythjensen 2 года назад

I also have a 2i2. Actually I have 2. The loopback option for the 4i4 is a convenience but you can accomplish the same thing and much more using Voice Meeter which is free.

@FireWalkMusic 2 года назад

@@aemythjensen The loopback function is a "nice to have", but as you say, you can do the same thing with software. The main difference between the various audio interfaces is mostly the inputs and outputs. When it comes to sound quality, they're all good and there's really no noticeable difference there. :) The solo for example is very similar, except that it has fewer in and outs, and a shared circuit for headphones and monitors in order to drive down the cost. :) I've seen some people find it annoying that you can't control the headphones separately on the solo, and in that case, a 2i2 or a 4i4 for example could be an alternative. :)

@LoneTinaja Год назад

Thanks for the review. I’m considering the Focusrite 4i4 (3rd Gen) or Motu M4. Did you rule out that Motu or other Motu models for some reason? Are there reasons why you prefer the 4i4 over a Motu M4 or M6? I haven’t yet been able to find out if 1 is more reliable than the other to work properly for years without developing a major problem that pretty much makes the unit worthless. As we know, the Motu M4 & M6 have LED meters. An owner reported that right of the box some of the pixels didn’t illuminate on his M4. Do you know if that type of problem tends to get worse over time? Regarding the Focusrite knob for setting recording levels, do you know if the LED rings showing green, yellow & red tend to go out over time? Do you know what is the most common hardware problem that makes 4i4’s pretty much worthless because it would be too expensive to repair? A reason I am considering Focusrite is because the warranty is 3 years. Do you know if Focusrite has a good or bad reputation for standing behind their stated warranty? Thanks for your help.

@FireWalkMusic Год назад

@@LoneTinaja Hi! Those two are very similar in terms of specs. The two major reasons I went with the 4i4 is because I have experience with Focusrite going years back, and I know them to be reliable over time. It's also cheaper than the M4, but still has the same features, except for the LEDs. However, I've tried the M4 before and didn't really find the LEDS to be particularly useful. It's more of a gimmick. The LEDS on the 4i4 work well and gives you all the info you need, and I haven't experienced them going out over time. I can't say anything about repairs because I wouldn't know, as I've never needed to have mine repaired. I did have some problems with a Focusrite SOLO that I tested a few years ago though. Turned out I had accidentally installed the wrong driver for it, so it was my own fault. Anyways, I contacted Focusrite customer support and they were very fast to reply, and really helpful in solving the issue, so their customer support was top-notch, which is another reason why I stuck with Focusrite for my latest audio interface. :)

@LoneTinaja Год назад

@@FireWalkMusic - thank you so much for your reply. It is important for me to read that you didn’t find the M4 LEDs to be particularly useful, plus the 4i4 LEDs work well. So, I’m ruling out the M4. Thanks again.

@kickasscorm 5 месяцев назад

Literally, the perfect review! I look forward to using mine. Thank you

@MetalDetailer Год назад

I have the 1st gen 2i2. Learned about the clipping issue’s a little late. I read that since the gen 2&3 came out they rectified it. So now to expand more I’m really leaning towards the 4i4. I love the features it has. This video helped sway me towards it more. Thank you!

@FireWalkMusic Год назад

Glad you found it helpful 🙂

@it-is-I-here-2727 Год назад

great video - I JUST ordered one of these 4i4's a few days ago so learned lots already -

@FireWalkMusic Год назад

Thanks! Glad you found it helpful :)

@KE-nx2xg Год назад

Great vid! I had no idea about the loopback function. That could really change your sampling flow! Thanks for this

@FireWalkMusic Год назад

You're welcome. Glad you found it helpful 😀

@Chalisque Год назад

You can get something like Voicemeeter for capturing output no matter your audio interface.

@natearchuleta2003 6 месяцев назад

Your diction reminds me of the how it's made voiceover guy. I thoroughly enjoy it.

@jareddrogose1470 2 года назад

I have a scarlet solo. It works well for what I need, but thank you for this review as I expand with my music.

@FireWalkMusic 2 года назад

The solo is good too. It works well for most "in the box" producers, which is the typical fl studio user. The main difference is that the solo has fewer inputs and outputs compared to the 4i4, and no loopback function. The solo also has a shared circuit for the monitors and headphones, while the 4i4 has a dedicated headphones circuit and volume knob for the headphones. :)

@digimoz7788 2 года назад

Exactly what I needed, thanks!

@FireWalkMusic 2 года назад

You're welcome 🙂

@mellivebrown28 Год назад

Very informative and well explained! Excellent work! Subscription done!

@FireWalkMusic Год назад

Thanks, glad you found it helpful 😀

@johnnyanko6051 Год назад

Good review, thanks!

@FireWalkMusic Год назад

Glad you found it helpful 😀

@joinslayer 2 года назад

I have the 2i2 and i feel it's perfectly enough for my needs. I was a bit unsure if i would like to have an interface without monitors-headphones switch, but i soon realized how well it can be done by adjusting the volume knobs.

@FireWalkMusic 2 года назад

That is a good audio interface too. It gets the job done 😀👍

@JRD876 Год назад

Great Video Bro I had to subscribe

@FireWalkMusic Год назад

Glad you liked it 😀

@Eng202 9 месяцев назад

I switched from the 2i2 2nd gen to this 4i4 3rd gen because the 2i2 2nd gen has no midi connections. And YES, THERE IS A MAJOR SOUND IMPROVEMENT IN THIS AUDIO INTERFACE. I'm happy with it.

@eriknagtzaam 3 месяца назад

Thanks man

@joshbrolicwright Год назад

I have this and I like it

@FireWalkMusic Год назад

I'm using it myself now. It's a good audio interface for sure :)

@music_creator_capable 2 года назад

Nice !

@FireWalkMusic 2 года назад

Thanks 🙂

@therealwolfspidertoo Год назад

Honestly the 2i2 is enough. Also like the fact that the 2i2 allows you to switch the air setting by hardware rather than software. This is especially useful if you're a Linux user and using a third-party DAW.

@peanuttheamericanakita9485 Год назад

FYI: Everyone told me I can't hook this up to a TV, even the people at Guitar center where I purchased mines. I have a 2022 Sony tv and I got lucky and it worked and now I'm able to hook my new studio speakers to my TV.

@chazcarpenter1559 Год назад

Yeah i have a 2022 LG C2 tv and im trying to figure out how to use this with adam audio studio monitors with my xbox and TV

@afridifacebook Год назад

Thanks!

@FireWalkMusic Год назад

You're welcome :)

@Fistful0fSteel Год назад

I have a 3. Gen 2i2 + Fishman Fluence pickups + Amp Sim. These in combination will take all its headroom. Questions: 1. Should I upgrade to the Scarlett 4i4 that has a pad (or another interface with pad) 2. Should I get a DI Box to attenuate 3. Can I just turn down the Amp Sims input and output to stop clipping? Best regards!

@defeatconformity478 Год назад

Great review! My only issue with it is I get static when adjusting the volume knob. Was thinking of switching to one of the Apollo Twin/Solo

@juicyjay3338 Год назад

Sounds like you have dust in your pot

@symerproduction Год назад

Or a ground loop

@thomasfroland762 2 года назад

Thanks

@FireWalkMusic 2 года назад

You're welcome 🙂

@lukogs Год назад

Can it record all inputs individually or it'll combine it to a single track like in beginner USB mixer? My inputs would be 1 singer (1 🎤), 1 violin (1 🎤), 1 Indian percussion (2 mic - left & right side of the instrument).

@timfranklin6596 Год назад

I love the unit but I wish they added an ADAT interface. I had an old FireWire unit with similar features but had the ADAT interface. You have to got up to the 8i... to get ADAT. Kind of a bummer.

@twintornadoestravel1119 Год назад

Question. I want an interface that will allow me to insert outboard gear into the signal from FL Studio. Is that what the hardware inputs are all about? I don't need a lot of physical ins and outs, but I do need enough channels to allow for looping through my favorite hardware.

@YohhananMusic 2 года назад

Exactly I have the same audio interfaces (booth like you. :) My very big problem (but this is the only one) of the 4i4, that many times, and I don't know why, doing that, if I listening music on Winamp or RU-vid, or using FL Studio, if it finds any "ghost" frequency (I can't describe it better :D ) that it perceives to be harmful to the speaker or what, it will suddenly switch off for a few seconds and then switch back on by itself. Very annoying, especially if I'm in the flow. Do you have any solution for this?

@FireWalkMusic 2 года назад

There's no built-in circuitry for that. It's probably being caused by something else in your setyp. I've found that in most cases when people have problems with playback in windows, or find that a track sounds different after being rendered out from their DAW, it's usually being caused by some third-party application like sound enhancers, 3d sound etc. :)

@ezmirkasmala3125 Год назад

Hi! Thanks for the presentation! Can we plug two mono hardware stuff in the line inputs behind, instead of one stereo synth? Like one drum machine plugged in 3 and another synth in 4 (both being mono then). I wanna be able to record 4 audio channels at the same time Thanks!

@Edgarcoste 8 месяцев назад

I have the same question. Could you figure it out ?

@ezmirkasmala3125 8 месяцев назад

@@Edgarcoste Yes, I finally bought the 5i6 I believe (4 audio front and 6 line behind). The Focusrite software is great to manage what you plugged into the interface. So if you buy the 4i4 make sure the instrument you want to plug in line (behind) has a volume knob so that you won't be limited (compared to the audio input front where you can adjust the volume directly on the interface). Hope that helps!

@chazcarpenter1559 Год назад

Trying to figure out how to use this with my xbox, tv, and adam audio studio monitor. Not sure how to set it all up

@sirvaant 12 дней назад

Note: when I first recorded in the loop playback 1-2 and two in my DAW, I got a really loud disturbing noise I figured out you have to hit mute on that track to avoid damaging your speakers or your ears!

@funKdatFPV 5 месяцев назад

Can I run a older cassette recorder to the input 1 on the front of the unit using a dual RCA to single XLR? Im a bit confused about the front inputs.

@supastylez Год назад

can we use this with OBS Studio to live stream with the Scarlett driver on with low latency?

@krisb853 Год назад

Yes. You should be able to live stream with it. I have a 2i2 Gen 3 and I use it to livestream. It is most likely that you would be delaying the audio anyway to match the video. I do not know the delay of the interface. Sorry for the late response. Our brains automatically fix the delay of sound up to a certain point.

@opticalman6417 Год назад

you want rme or uad high end audio interface anything cheap wont cut it for decent sound that true to what your hearing

@Step91 Год назад

Does Windows recognize 2 different lines out? Output 1/2 and Output 3/4? I want to plug speakers at 1/2 and subwoofer at 3/4 so I can EQ them separately in Equalizer APO. I don't care about software routing and DAW, I need Windows itself sees all 4 outputs to work properly in Equalizer APO. Thanks.

@henryijeoma 2 года назад

I have the 2i2, but I've noticed that it doesn't drive my monitors loud enough compared to my Apollo Twin X

@FireWalkMusic 2 года назад

I've tried many audio interfaces over the years, and there are always subtle differences in the output gain, but I've never found it to be really noticeable. I have both my monitors set at 50% volume, and even when playing quite loud, I never seem to go beyond 50% on the monitor knob on the audio interface. If I were to crank up both the monitors and the audio interface knob near max, I would probably end up with permanent hearing loss, or I'd blow out the speakers :) I find it strange that you're not getting enough volume. Sounds like there must be something wrong with your audio interface, or perhaps some of the settings in the software have been changed so that the output is too quiet. What kind of monitors are you using?

@JostSchwider 2 года назад

👍 - _also_ for the YT algo! 😊

@FireWalkMusic 2 года назад

Thanks! :)

@MidWestHustle465Grind 4 месяца назад

bro how do I turn on the air on my interface? and how do I download the software that you're using in the video ??? ive been looking and you have the closest video to what im looking for but just not quite

@neovincibeats Год назад

How can I route the audio from MPc 2000 INTO MY CARLETT AND HEAR IT THROUGH my scarlett for playback

@takeflightleakz8449 5 месяцев назад

Can i use this to connect 2 pairs of studio monitors both to play simultaneously?

@nenadjovicevic3563 Год назад

Hello, does anyone have an idea how to remove the noise on my 4i4 interface when recording instruments. I don't have it on the microphone. Thank you so much.

@SilvvaOfc 4 месяца назад

I'm using Audiobox 96 presonus and honestly l can't use the interface driver because of that crackling sound regardless of the buffer size... What could be the possible issue maybe

@dMATb 2 месяца назад

Can I use this on Logic Pro with different outputs about metronome listen cause?

@GnosticXMusic Год назад

How do I record with the inputs 3 and 4? They won't show up in my DAW (audacity and Mixpad Multitrack). Only 1 + 2 show up.

@doubledown4957 Год назад

Have you find the answer to this?

@GnosticXMusic Год назад

@@doubledown4957 yes, ty

@doubledown4957 Год назад

Can you connect 2 mics and 2 instruments and record?

@claudioagmfilho 3 месяца назад

🇧🇷🇧🇷🇧🇷🇧🇷👏🏻, Awesome video!

@henryijeoma 2 года назад

Do you have any experience with the Apollo Twin X? I heard it works best with Apple computers and sucks on windows

@FireWalkMusic 2 года назад

I haven't tried it myself. It's supposed to be good but it's also quite expensive so I wouldn't expect anything less. :)

@FireWalkMusic 2 года назад

Regarding problems, I usually see people having various problems with most audio interfaces. It's usually due to some kind of conflict, using the wrong driver etc. In some cases the driver simply isn't any good, but this will usually get resolved by an update, and is usually something you risk if you buy a brand new product. If you buy something that has been on the marked for a while then at least you can rest assured that the driver is good (usually). As for the Apolli Twin X, I see some people praising it, and others talk about crackling sound. It could very well be the same thing I'm experiencing if the asio buffer is set too high. It might simply be a windows issue, because it does occur in the DAW, only in windows. Reducing it to default takes care of the problem.

@negvey 2 года назад

I have Scarlett 2i2 & still get cpu lag when recording midi, whats a better option to avoid this problem?

@FireWalkMusic 2 года назад

Make sure you are using a USB 2.0 or 3.0 port, and that you are using the provided asio driver (Focusrite usb). Set the buffer as low as you can. Don't use the fl studio asio driver as it's a kind of hybrid driver. Usually, when people experience lag it's either the settings or the computer itself is simply not fast enough. :)

@negvey 2 года назад

@@FireWalkMusic omg I figured out my problem, I never had the drivers in the first place!!!! this whole time I was recoding with 100 ms, this video helped me out so much, thank you!!!!!

@FireWalkMusic 2 года назад

@@negvey Awesome! Glad you finally got it sorted 😀👍

@pinkaverse9468 Год назад

it is possible to have 4 guitars on 4i4 ?

@jgaming4x619 4 месяца назад

how do i turn the air button on

@eddieadonis9495 Год назад

There’s no factory reset. My interface is stuck/jammed with all light lit up and cannot be fixed. Not even the suggestions on the focusrite website was of any help

@luissalazarweil9775 Год назад

Does this work on M1 Macs?

@nah7612 Год назад

do 250 ohm headphones sound good on this

@FireWalkMusic Год назад

USB-powered audio interfaces have limited power frmo the USB port and they officially support up to 200-ohm headphones. I've used higher-impedance headphones than that in the past though, so 250 ohms shouldn't be any problem. It might be slightly quieter, but it will still be plenty loud. Once you get up to 600+ ohms then I would start thinking about getting an external amp.

@nah7612 Год назад

@@FireWalkMusic do you know any dac and amp combos that come to same price as scarlet ? I jus don’t wanna buy this interface and then it has the same problem as my current behringer u phoria umc22 we’re it’s all quiet loads of popping and distortion even at low volumes

@errepeoficial 8 месяцев назад

My friends and I want to start a podcast, there is 4 of us, could I connect 4 mics to this audio interface?

@FireWalkMusic 8 месяцев назад

The Focusrite Scarlett 4i4 has only two XLR/TRS combination inputs on the front, which means you can connect two microphones simultaneously. If you need more microphone inputs, you might want to consider a larger audio interface with more input channels.

@errepeoficial 8 месяцев назад

@@FireWalkMusic thank you very much !

@FireWalkMusic 8 месяцев назад

@@errepeoficial you're welcome 🙂

@thorny7138 Год назад

I do have one question. Am I able to listen through my computer headphones if I do not have 1/4" headphones? Like bluetooth headphones. Your video is great and answered all of my questions except that one.

@jasonreales3840 Год назад

Bluetooth wouldn't be all that recommended if your using them to mix your work due to the latency. The headphone input is recommended and listen through the monitors/speakers

@thorny7138 Год назад

In my current living situation I don't really have much of a choice so... I take that as a no.

@thorny7138 Год назад

Update: I got it to work.

@jasonreales3840 Год назад

@@thorny7138 what you end up doing?

@thorny7138 Год назад

I feel really dumb. All I needed to do was set it to playback through the software I'm using (Audacity) and I can use whatever headphones I want through my computer. Slowly figuring this stuff out, emphasis on "slowly". lol Thank you for the lightbulb moment!

@szastubeats Год назад

And No direct monitoring knob

@DekhteRahiyeNa 2 года назад

Hey buy 1 for me too ..

@FireWalkMusic 2 года назад

😆

@DekhteRahiyeNa 2 года назад

@@FireWalkMusic Kidding ... Already have one 😃😃😃 but Thank you for sharing valuable information

@FireWalkMusic 2 года назад

@@DekhteRahiyeNa you're welcome 😀

@buttholesniffers Год назад

I got this thing a few months ago, I upgraded from the 2nd generation solo. I HATE THIS THING!!

@FireWalkMusic Год назад

Hi, what do you hate about it?

@buttholesniffers Год назад

@@FireWalkMusic I hate that the control panel is so limited. I'm trying to reamp and I can't seem to control what is being sent to output 3. It's sending the main audio from the daw when I want to be able to just send specific things for reamping. For instance I'm trying to reamp bass but somehow my drums are being send to my amp. Just annoying

@FireWalkMusic Год назад

@@buttholesniffers I see. there's not much in terms of physical controls. Even the air button from the solo has been removed. It's probably to keep the price down. All the routing and such has to be set up from the Focusrite control software.

@williamrivera6818 Год назад

I’m having like a shhhhhhh sound like rain

@googleboughtmee Год назад

Wait where's the Direct Monitor button

@JorgOnline1 Год назад

I was looking for that too, i don't see one.

@keychainzindigo 11 часов назад

Are you ready? Follow ✅

@undercrackers56 Год назад

So close and yet so far. If only it had four pre-amps and two headphones. That would open up it's appeal to more organic music and not just the bedroom EDM people.