Ford 6.0 Liter Powerstroke Fuel Injector Installation

Подписаться 47 тыс.

Просмотров 441 тыс.

50% 1

Watch how to install a fuel injector on a Ford 6.0L application. Here's what you need to know for the job:
Level of difficulty: ADVANCED
Approximate installation time: 2 1/2 hours for driver's side; 5 1/2 hours for passenger side
Tools needed: T60, T55, T40 extended shank, T20,10 mm socket, 8 mm socket, extension, ratchet, OTC 6766 harness release tool,
Vehicle Used: 2004 Ford F250 Super Duty
Featured Part Number: FJ928
Parts for the Job: www.standardbrand.com/en/produ...
Motorist: If this job is beyond your skill level, visit your automotive service professional.This video is for general information purposes only. The provider makes no representations or warranties as to the information contained in this video or its usage, completeness, quality or accuracy. Any use of such information is at the user's sole risk, and in no event shall the provider be liable for any consequential, incidental, special, punitive or direct or indirect damages arising from such use.

Авто/Мото

Опубликовано:

29 окт 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@HTX_Metal_Head 8 лет назад

yall did a great job with this video. there no way it con be misinterpreted by a competent diesel mechanic. thumbs up.

@StandardBrand 8 лет назад

Thank you, Ryan! We're happy to hear that.

@luigiluigini9500 6 лет назад

Superb video .......bravo Need more people like you making how to videos

@kevinedward1234 6 лет назад

Great video Standard!!!

@luigiZHP 9 лет назад

Good, clear instructions. Really appreciate the bleeding tips -- those are excellent. Thanks for your time and expertise.

@ejgamez0717 7 лет назад

I have a 2004 f450 I have 4 bad injectors I'm planning in changing them all. My question is that if this is the same procedure I should follow or does it change in any way?

@EndingTheCycle 7 лет назад

very helpful. I'm attempting for the first time to replace my injectors tomorrow

@ichevtchenko 7 месяцев назад

how did it go?

@jacobramirez4586 7 лет назад

good video, details are spot on.

@StandardBrand 7 лет назад

Thanks Jacob. Glad you found it helpful!

@HTX_Metal_Head 8 лет назад

original owner though it was toast. not one puff of blow by. the white smoke and knock is juat a injector. best buy ever.

@boanumberone 6 лет назад

Thank you so much for the video

@phoenixtimber4343 5 месяцев назад

Awesome video. Thank you

@mikeodell5915 5 лет назад

Great video thank u

@frankmuhammad9660 6 лет назад

Great Video!!!!!

@StandardBrand 6 лет назад

Thank you, Frank! Glad you enjoyed it.

@BuddyGallo 4 месяца назад

Great video thanks

@irondog7024 6 лет назад

Great video

@StandardBrand 6 лет назад

Thanks for the feedback!

@campingmods496 6 лет назад

Is it required to clean the injector bore? If so what could be used? I understand ford has a brush but the price is too high. Would a copper pipe brush be ideal?

@franciscohunter4422 8 месяцев назад

Thanks 🙏 brother for showing us your knowledge 👌but I have a question do I have to reprogram the injectors after installed or not?

@HTX_Metal_Head 8 лет назад

i just bought a 06 6.0 crew cab 4x4 fully loaded,studs and egr delete. only paid 3k$. swapped turbo and now injectors it is. got 1 knockin hard and white smokin. changin all 8 while im in it. plus alot of other things.

@campingmods496 6 лет назад

Dude! fucking sweet!

@Edenssunlight 7 лет назад

or use a socket to release your injector connection on the head

@nickrios3520 8 лет назад

I own a 6.0 2005 best engine ever on a 6.4 but the 6.0 is a better engine

@leraybojangles711 8 месяцев назад

Where did you get that bent little tool to pop out the crimped plastic electrical connector of the injector?

@isaabdrahmansosa-dominguez267 7 лет назад

I have a 2003 f250 king ranch. I noticed a reduction of power. After connecting the computer I discovered that my injector #4 is misfiring. Sure I replaced all of them or just the #4 that the computer said that I have problems with?

@StandardBrand 7 лет назад

Hi, Isa. Thanks for the question. Depending on the mileage of your truck, it would be a good idea to replace them all. Regardless, it would be a good idea to replace all injectors on that bank while the valve cover is off. Hope that helps.

@ejgamez0717 7 лет назад

I have a 2004 f450 and I'm planning on replacing all 8 injector, I just wanted to know if I have to follow the same procedure as this video or does it change?

@StandardBrand 6 лет назад

The process is pretty much the same for each injector, although you don't need to remove the valve cover, high pressure rail, bleed it for each individual injector. That stuff is only done once per bank.

@LynxStarAuto 5 лет назад

It is not a T60, it's an Allen bit 10mm (old style) or 12mm (new style). If you have the old style, replace them immediately with the new version. Ford parts ONLY.

@eldiabloelbandito9550 6 лет назад

I'm gonna try this next injector that goes out. Other videos make it look difficult. You make it look really easy! Thanks! Would a scangauge 2 tell you which injector is going out?

@StandardBrand 6 лет назад

Thanks for the comment. We're not as familiar with scangauge 2. You will need a scantool to determine which cylinder is misfiring. Once you determine that, you need to verify that there's proper compression before condemning an injector. Hope that helps.

@dynocompe 6 лет назад

hmm, i havent seen a video that looked hard. lol

@dynocompe 6 лет назад

this guy doesnt show the steps to get at the valve covers, that is the hardest part. If this is advanced mechanics as the video says, wow.

@mitchellpisarzewski194 5 лет назад

What injectors are in this truck

@nombre6503 2 месяца назад

I followed this video step by step, but I still have white smoke after my swap. Can anyone help me diagnose what’s wrong or help me in the process to do it correctly ?

@joeymcpheeters5017 7 лет назад

Gotta question, I got a 2003 f250 6.0. It's got constant white smoke coming out the exhaust. I did some research. Found out it might be bad injectors, EGR valve cooler, or a cracked head gasket. Any tips or ideas on what it might be.

@StandardBrand 7 лет назад

Hi Joey, We recommend taking it to your local repair shop. We are not confident answering without being in front of the vehicle. Best of luck.

@davidferland9298 7 лет назад

Joey McPheeters head gasket

@Brenden.Riley. 4 месяца назад

Did you ever figure it out? I’m going through the same issues.

@jesuspalomo5442 6 лет назад

remove the oil rail before removing the dummy plug and save I do not know where it went I can do

@davidferland9298 7 лет назад

why is he not using new oil on o ring on injectors

@michaelhaiden6718 7 лет назад

you said num 4 that's the drivers side I thought num is on passenger side second one back

@amordeweso 6 лет назад

michael haiden all the odds are on the passenger side

@campingmods496 6 лет назад

Ford labeled the cylinders on the 6.0 beginning with the passenger front, driver front then back to the passenger side. Driver side is 2,4,6,8 and passenger side is 1,3,5,7

@wtw1973 7 лет назад

You sure that's #4??

@dwightschrute1953 7 лет назад

i know , isnt that #6 ?

@hossrod 7 лет назад

Yes, it is #4. Odd cylinders on passenger side, even numbers on drivers side. He's working on drivers side, with let side of video being front of engine. Front most cylinder is 2, then 4, then 6, then 8.