Ford Crown Victoria Police Interceptor Hits The Dyno! 

Check out our Texas DPS SSP Mustang Dyno Video! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q4zUEYXOMZc.html

The 4.6 is easily one of the greatest V8s ever produced

That Vic is clean love the tires and rims.

I could listen to that V8 all day and never get tired of it 😍

CROWN VIC NATION!!!!!! WOOOOO PROUD OWNER OF A 05 P71 WITH 132K ON IT BRAND NEW SUSPENSION.

The black P71 looks hot. Needs a Coyote swap.

Wheels and tires look so sweet.

I would love to see the dyno on this Vic prior to the SCT tune to see what difference the tune made.

Wild! I love me CVPI and the only thing I love more than owning one is seeing others love theirs. Keep on keeping on fellas.

That thing is clean af. Love the crown vics

That thing is just gorgeous with those Steelies. Gives it that beefy look 😍😮‍💨

275’s out back! That man had the wheel widening service done? 😎

I hope LMR could do more parts for panther platform cars

These are very underrated fords.great sleeper cars.

Absolutely gorgeous Vic 💯🙌✌

I dont care that they’re slow. They just fucking look amazing and drives so well

I love this car like crazy

Damn....you caught me off guard with the liter of cola reference.

That car is sooooo cool!!!!

I like the 4.6 in it for highway driving but hell with that just try to coyote swap it .

That Dyno is some piece of equipment and Eric has a bad A$$ ride too. All black, beefy tires, probably the Mustang chin spoiler, the blackout side markers and I notice it has the fog lights. The reason I don't have them on mine is because I could never find someone who would throughly go over the materials and show the instal on assembling the fog lights. I mean I've seen some but not to the satisfactory where I can go do it myself. In fact it sure would be nice if Eric can show what brand, products and materials were used to install the foglight. Where Eric has his place is exactly where I would like for mine to be. That would be a real treat for me. Not asking for Eric to do a complete demonstration; just lift the car, point, show and explain. Hypothetically what he might do differently or why he may use something else vs what he has already. Keep up the vids and Thanks a million!

Sweet sound

Cool car!

Such a great platform, can't wait to see some 7.3 low riser intakes swapped vics around...

Nice looking vic for sure...

I had an '07, thing moved pretty good for a big heavy car.

Love your build Eric 🤘🏼 Sunshine made sure no one said “ I know what’s wrong with it it don’t got no gas in it” 😂

It's actually rated at 297ft.lbs torque. He just mixed up the 9 and 7. Im guessing this was a mistake. 250hp is correct though.

I have two 09 cvpi there my favorite 😍

I've got Crown Vicks too and I always thought that they were the duck's guts but after the dyno run I guess they're closer to chicken fu*%ers. Of course mine is just an 'Altered State Trooper'🚓💨

That's a Bad Boy Victor ,

Good Dyno Landon!💯👊🏾 How about getting a Ford Mustang SSP on the Dyno?

I’m diggin the low stance she got

Where can we see more of his car? I want to know suspension mods and that chin spoiler. Widened Steelies?

I just bought a Canadian police Interceptor. Holy hell this car is awesome. I'm new to learning about cars, and I think I'm going to beef this car up.

Bad ass looking vic

My 09 P71 made 222rwhp completely stock a few years ago, with longtubes n open cutouts it made 240rwhp, 83k miles.. Gonna post the video maybe tomorrow, meow..

I had one of these doing 220klm’s on a shitty road one time. They are tough

Even though its only got 198 hp it sounds so much faster lol

Not sure what shocked me most. The sound of that thing when you unleashed it, or seeing a young man who doesn't have two full arms of trashy ink. 🤣

Dyno day is the greatest day of the week. As far as a list, I would say just put every employees car, that wants to participate, on the dyno!

I would like to know more about the fog lights. Maybe a video on the install, wiring, switches and all that. Please and thank you

I second the idea of a Coyote swap!

Great Car , ❤❤

The 4r70/75 isn’t a slush box with the Jmod and a good tune! All my vics chirp 3rd gear

I have a northstar in my caddie that runs so good but I also have a 08 mercury grand marquis and honestly I enjoy it more and even though not same horse power the mercury to me is more fun

Meow that's a pretty clean ride!

Damn and my 3.8 V6 full bolt-on and tune made 198rwhp and 244rwtq😮!

I want this car 🚗 😍

Tough looking CV! Sounds awesome too!

Would like to see 1995 ford lightning on the dyno

Since this came on a mercury marauder would be damn cool.

I’d love to see more of this car particularly on the highway to see what rpm ranges he’s at. Hardly any videos on these cars with 4.10’s and a tune to fix the speedo

3rd gen Coyote swap with a 10 speed auto would be an excellent plan.

Yea, those are ADTR widened steel wheels, stock PI wheels don't hold 275s lol. Looks good tho, mod list is solid so far. Next on his list should be boost, or a Coyote swap

Yesssssssss

yall going to let the nice cowboy have it once your done... right? Come on, you know a cowboy like me sure would love that car! (I had a Nice 2011 but it was rear ended by a truck doing 50mph and she is in that parking lot in the sky now)

Alright meow. I almost passed out. That was funny

Was he saying meow

What is your wheel setup?

Dyno any year of Ford Thunderbird supercoupe sc 3.8 or v8 1989-1997 5.0 or 4.6. auto or 5 spd 89-95 sc. Or even mercury cougar same setup and years or Lincoln mark 8?

What size tires are on that Crown?

I like 4.6's but could you imagine if ford stuck with pushrod engines? Imagine getting a crown vic with a modern 351 or "old" 302. G dang that would be sweet just for the torque alone lol

Definately a car that was built more for endurance rather than raw power. A car they were chasing may out run them but will probably fall apart during the chase, while the cv can take them out and drive away.

damn i love crown vics i love mines to death but i wish they coulda gave us a bit more power...

can you guys do a 2011-2017 v6 mustang?

are those aftermarket fender flares and front lip? id love to know what they are

Have youll done anymore with the vic? im looking to do cams in mine

A 1990 Ford f150 extended cab with the 300 inline 6 is what I would like to see dynoed

When you gonna do a stock gen 2 ⚡? Also, can we please get some more repo parts made for our trucks 🙏

Is that a staggered setup? It looks like the rear wheels have been widened an inch or so.

Can y’all do a 1998 2v f150

where did he get fog lights to fit the Crown Vic ?????????????

How did he lower his crown vic? There’s not many options and I don’t have the budget for the 800$ coil overs for the front only.

That’s one clean vic 👌🏽 What’s his insta?

Time for yote swap r80 TT if there is any cash left 😄

Come on meow, throw a 6.2 Raptor on the rollers. We have one on hand if you ever want it. Sunshine - that is a sweet Vic.

Were the rear rims widened?

How do I find the yellow bulbs inside the headlight

Please do 2001 bullitt

I thought these CVPI vehicles from 2006-2011 had the 4R75E transmission ("E" standing for electronic controls to work with the newly introduced drive by wire engine starting for the 2006 model year) from the factory. Was this a replacement trans, or am I incorrect about this?

Mercury Marauder perhaps

Nice car, but I don't get why it only produced 198 horsepower on the dyno if it is rated at 250 from the factory. Why the lower number?

Are the back rims stock, how’d he get 275 tires on there???

94-96 Ford thunderbird v8.

what size is that wheel that the car has

Is it lowered? Looks like the tires tuck in nicely

God damn she's beautiful 😍

Ford galaxie with a BBF

Anyone able to get their hands on a Mustang Mach-E to dyno?

Вот он. Самый быстрый автомобиль в мире

275 50 /17 tires on back??

I'm Curious of the results, could you please dyno a 1980-1981 foxbody with the 255 cubic inch / 4.2L v8

Do da 2 valve boogie..............

Please I need some help do y'all do help with tuning

Try a 09 Chrysler 300c 5.7 hemi

That's only about 14 less than the GT mustang. With a simple tune (marty) and more open exhaust it would easily pass that

So is this car exactly how it was when it was a cop car or did he modify it I would like to see what a real cop police package crown Vic made stock from factory for police crown Vic's the mods they did to make them faster for cops and not modded cuse of they made some good power then they make a good budget sleeper base for a build. My 2015 Camaro RS made 296 rear wheel horsepower to rear wheels stock besides a CD air intake and throttle body spacer and a down pipes cuse you can't put headers on the v6s cuse the exhaust manifold is molded into the heads but for a V6 Camaro the RS package is amazingly beautiful interior and exterior has exact same body package as the SS except it has RS in the head rests which was a package to add to the RS was embroidered head rests and embroidered carpet rs floor mats and the glove box had RS stiched into it and paint matched plastic engine cover with RS on it. Has same wheels and tires stock as the SS came with same Cowell induction hood and all it's fast for a V6 car makes more HP to the crank then a V6 lotus does so it's got V6 super car power at a budget price making 390 to the crank when I had the old motor out to replace with a brand new stock V6 motor we dynoed the old one and new one and new one made 390 to crank all stock and the old one made 379 a little HP lose from age but still made more then what GM advertised it at which is cool for insurance reasons but they under sold the horsepower which normaly they over sell the horsepower number by 10-100 HP more then they actually have sometimes but in this case they under sold it I loved my RS Camaro until it got rear ended by a 18 wheeler only had it for a year and a half which sucks I never did any burnouts or hot roded it which now I regret not having fun it cuse i deprived my self of the sports cars fun by running it fast around curvy roads racing at stop lights drifting it and sliding and doing burnouts cuse I didn't wanna tear it up

Suspension mods?

20% drive train loss from 250hp? And it's got a tune? So it's probably more like 25%. I didn't think it would lose that much.