Ford F150 Wheel Bearing Replacement 2011-2014

Подписаться 193 тыс.

Просмотров 62 тыс.

50% 1

Step-by-step 2011-2014 Ford F150 wheel bearing replacement including best practices and torque specs.
Detailed instructions including parts and tools used in the video
gotech.com/learn/how-to/repla...
How to diagnose a wheel bearing
gotech.com/learn/how-to/diagn...
0:00 Intro
1:16 Remove wheel and tire
1:40 Remove dust cap and axle nut
3:53 Remove brake caliper and rotor
6:04 Bearing bolt removal
6:53 Detach ABS wiring harness from body
8:40 Remove Bearing
8:53 Inspect IWE
9:05 Clean up and lube for reassembly
10:24 Reinstall hub assembly
12:00 Reinstall axle nut and dust cap
13:38 Re-attach ABS wiring harness
13:53 Reinstall brake rotor and caliper
14:42 Summary

Авто/Мото

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@GabrielKovacs-if9pt 2 месяца назад

Completed the job in just over an hour, great video, well explained.

@medtoolman8684 10 месяцев назад

Watched your video and replaced my left and right bearings. By no means am I a mechanic but followed you to a tee and not one issue. Thank you! Feels great doing something like that yourself!!!

@djosbun Год назад

Great tip regarding the splines, Mike! Some people may zip through this repair but if they don’t pay attention to the details it’ll be a painful learning experience. You are spot on, as always!

@GoTechTraining Год назад

Hey Dave, thanks for watching! Taking things back apart is never fun! Mike Becker, Senior Instructor

@nicknicu1787 Год назад

Great video for DIY-ers doing it in their driveway! 👍

@GoTechTraining Год назад

Hey Nick, thanks for watching! That was kinda the goal here. There's not much special to these bearings. Chances are tech's don't really need a video on how to replace them so we took the DIY approach. That's why I didn't use any power tools too. Mike Becker, Senior Instructor

@shanewark433 Год назад

Very well done and descriptive video. Thank you and great job.

@GoTechTraining Год назад

Hey Shane, Glad you enjoyed it!

@coreyc42 Год назад

You the man. Thanks for posting!!!

@GoTechTraining Год назад

Hey Corey, Thanks for watching and reaching out!! ~Ryan

@nickayivor8432 Год назад

Happy Wrenching PRODIGY Go Tech Mike Becker Tutorial great from start to finish loved it Thank you very much. Take care and have a great day Go Tech Mike Becker From Nick Ayivor from London England UK 🇬🇧

@GoTechTraining Год назад

Hey Nick, thanks for watching bud! Mike Becker, Senior Instructor

@randirlom9508 Год назад

Thanks Mike, always enjoy your videos

@GoTechTraining Год назад

Hey Randir, thanks for watching! Mike Becker, Senior Instructor

@rickrogers2649 Год назад

Great video Mike. I replaced the bolts on an old Explorer once. They were wierd narrow shank bolts and Ford got 15 bucks each for them. I think that's why Ford says you should replace them. $$$$😁

@GoTechTraining Год назад

Hey Rick, thanks for watching! Yeh, you might be right about that. Sometimes the hardware costs almost as much as the parts. Mike Becker, Senior Instructor

@dallasharris8753 9 месяцев назад

Nice job, really explained well, especially like the fact that you mentioned torque specs along with tools needed to complete the job, and safely tips. I just had mine diagnosed to confirm what I felt was wrong by a tire shop, i immediately went to parts shop, they had the two hub bearings in stock and I was able to purchase them on my friends acct., paid cash n saved half of what the tire store wanted, over $1000.00 for parts plus $300.00 labor and got them for right at $510.00 plus me doing the labor thus saving $800.00 plus any other tax’s the shop wanted to charge me. Again much thanks ! 💯👍

@OmarSanchez-mc2qu Год назад

thank u its so good video

@GoTechTraining Год назад

Thanks for watching Omar! ~Mike

@johnnyblue4799 Год назад

Nice job... the driveway setup made it look more like a DIY job, so very close to how I'd be doing it. :) Personally, I'd replace both bearings. They probably have the same lifespan, so the right side will fail soon.

@GoTechTraining Год назад

Hey Johnny, thanks for watchin'. Yeh, that's what I was kinda going for. Replacing both at the same time isn't a bad idea at all! Mike Becker, Senior Instructor

@mikelawson6934 Год назад

100 dollars and hour add up quickly having it done a mechanic shop so thanks for your demonstration.

@GoTechTraining Год назад

Yes Mike, it certainly does! This isn't too bad of a driveway job if you have some tools and some time :) ~Mike

@GoTechTraining Год назад

Hey Mike, You're welcome! Thanks for checking out the video! ~Ryan

@MrLuanDo 9 месяцев назад

Thank you!

@ululi1970 Месяц назад

Should vacuum be applied to the IWE when reinstalling the hub?

@mikechiodetti4482 Год назад

Good job Mike. Not as much rust as South Main Auto in upstate New York, but you do have to be careful not to snap off bolt heads. Hopefully the 4x4 IWE worked ok.

@GoTechTraining Год назад

Hey Mike, thanks for watching! Yeh, this one wasn't too bad considering that the truck spends it's life outside. IWE/4WD worked great following the repair. Mike Becker, Senior Instructor

@gimmetaco2037 Год назад

@@GoTechTrainingcouldn’t tell, but is this the 4x4 in the video?

@dantemagz6672 2 месяца назад

@@gimmetaco2037no is a front wheel drive truck

@danielmackey6594 Месяц назад

Tried this on my truck... didn't go well for me. I ordered a MEVOTECH TXF40302 off Rockauto. The part looks amazing and came with everything I needed. However... when I put it together, it made a grinding noise like gears barely touching each other. The old part doesn't make that sound and the 4wd engages and disengages just fine. No noise while 4wd engaged. When I pulled a vacuum on the 4wd actuator, it holds vacuum well and disengages the axle. But the gears just barely touch and make a grinding noise. Bad actuator? or bad new part (gear face too long?)?

@beluxauto5968 Год назад

I think most mechanics re-use the same bearing bolts if they don't come with the bearing. And loctite is a must.

@GoTechTraining Год назад

Hey, thanks for watching! Yeh, I think so too. Mike Becker, Senior Instructor

@BZ1340 2 месяца назад

Do you have to change out the hub assembly also.

@amrikjaswal76 Год назад

Thank you for the video....I will be changing the wheel bearing hub assembly on my 2013 Fx4. I was just wondering if you would happen to have the part number for the metal cap that seals the shaft nut.

@GoTechTraining Год назад

Hey Amrik, thanks for watching! Here's the link to our website that lists the parts we used. gotech.com/how-to/replace/replace-2011-2014-ford-f150-front-wheel-bearing ~Mike

@noahcalderon8780 Год назад

Gracias

@GoTechTraining Год назад

Thanks for watching Noah! Mike Becker, Senior Instructor

@gabrielocampo2265 7 месяцев назад

Do you have a video for the 10th generation honda Civic?

@HowToDoitright 3 месяца назад

What type grease did you use

@robmacaries695 4 месяца назад

Another tip my axil pin did not come out enough to put the 15mm nut on it. So tap and shake until the nut fits on. Then leave dust cover off and drive around < 40mph and it came out that rest of the way. tighten up nut remove tire and put dust cap on.

@nikm6548 11 месяцев назад

What happened if over tightened the axle nut? I think i broke the bearing on the axle cause my driver side axle is moving

@edwardprokopchuk3264 Год назад

No grease on the spindle and needle bearings?

@Scooterpie-oc5cd 25 дней назад

does this work for the rear also?

@donavonlacy2324 9 месяцев назад

What’s weird is my wheel bearing doesn’t have the locking nut that u have to take off in the beginning is that normal?

@carlodonnell146 Год назад

tommmmmm!!!!!! to tom-tom, tom-tommmm good intro music

@GoTechTraining Год назад

Hey Carl, glad you enjoyed it ;) Mike Becker, Senior Instructor

@Mit_Reklaw Год назад

Are 2wd & 4wd hubs interchangeable? Can’t find 2wd hubs anywhere for the 05 f150

@tjbickner3427 11 месяцев назад

No. 2wd is a hair smaller. I just spent $260 for 2wd one today.

@blockbertus Год назад

I'd like to add that the remaining wheels should be blocked off from roling away. Especially if its on a slope.

@GoTechTraining Год назад

Hey Blocki, not a bad idea at all! Mike Becker, Senior Instructor

@marvincortez6684 9 месяцев назад

I replaced the wheel hub and the abs light turned off initially but then came back on

@steve0923 11 месяцев назад

why is 2010 not included? just wondering if there was something different

@markjohnson5081 Год назад

Does Ford want those hub bolts replaced because they are "torque to yield," types? That is, they stretch when torqued properly?

@GoTechTraining Год назад

Hey Mark, thanks for watching! Usually when I see torque to yield bolts they have a ft lb torque value followed by a set amount of degrees. These did not, making me think they are not TTY. Mike Becker, Senior Instructor

@jeremyanthony9300 Год назад

Nice job Mike. Little bit of a pita in the driveway isn't it?

@GoTechTraining Год назад

Hey man, thanks for watching! I mean, sure, it's easier and faster on the hoist with power tools but in this case I wanted to show that it's a DIY friendly job. Mike Becker, Senior Instructor

@carlodonnell146 Год назад

I always say that if bolts or anything is supposed to be replaced with any repair, how come the bolts are not supplied with the part?

@GoTechTraining Год назад

That's a great point Carl! Mike Becker, Senior Instructor

@jeremyanthony9300 Год назад

Why don't you use the studio to do that job where you have a lift?

@GoTechTraining Год назад

Just setting the scene for our viewers who don't have one ;) Mike Becker, Senior Instructor

@nicknicu1787 Год назад

WOW look at those control arms, they're petrified!!! 🧐😂

@GoTechTraining Год назад

Hey hey Nick! Good ol' rust belt my friend! Mike Becker, Senior Instructor

@addisontaylor4034 Год назад

MY F150 IA NOT 4 WD. IS THE PROCESS THE SAME

@GoTechTraining Год назад

Hi Addison, The process should be similar, you just don't have to worry about the CV axle and IWE actuator Ryan Wilsing, Technical Instructor

@WHATDATTOOLDO Год назад

Mine is just spinning hard o can figure out if I need a new one or not

@GoTechTraining Год назад

Hi, when you say spinning hard, what do you mean? Like its seized up or are you trying to spin it by hand with the axle shaft installed still? ~Mike

@WHATDATTOOLDO Год назад

@@GoTechTraining so one of my front tires when the whole front is jack in the air spins a least one 360 if I spin it and let go the other spins harder but spins can't figure out if it's the caliper or hub

@hwalter5432 3 месяца назад

My local dealer wants to charge me $2000 to replace the rear end bearings on my 2013 F-150-that I have had serviced regularly every 5,000 miles since new! and not once did anyone mention they don't check rear end lube, bearing wear or that I needed to have it done! So stuck with $2,000 bill for what should have been caught years ago

@edwardb911 23 дня назад

Change it yourself. It’s so easy.

@carlodonnell146 Год назад

it's a very small nut for such a big truck

@GoTechTraining Год назад

Yeh it is...but the spline point is on the back side with the IWE. Unique set up for axle to hub. Mike Becker, Senior Instructor

@erikkirby1 Год назад

If it was always that easy up north!!! lol!!!

@GoTechTraining Год назад

Hey Erikkirby1, this is a Wisconsin truck. Sits outside everyday of its life! Seriously, they don't pop out too hard on these because it's a sealed knuckle essentially. Mike Becker, Senior Instructor

@erikkirby1 Год назад

@@GoTechTraining living in Quebec Canada with our weather we usually have to air hammer those out, ending up cracking the vaccum actuators or loosing vaccum seal between the actuators and the spindle...

@GoTechTraining Год назад

Woah for real!? How do you ever get Edge/Explorer rear bearings out?! haha! Mike Becker, Senior Instructor

@erikkirby1 Год назад

@@GoTechTraining cut a stud off of the hub an put a screw in with a nut behind... it acts like a puller ;) in pushes on the knuckle

@GoTechTraining Год назад

Eric O did a video showing that. I haven't needed to do it yet but I will try it when the need arises. It's inevitable haha! Mike Becker, Senior Instructor

@robmacaries695 4 месяца назад

This job is not a 1 hour job It takes the whole weekend: router sticks, bolts sticks, hub sticks. I had to walk to Autozone for stuff to help. If it's your only mode of travel plan plan and practice. Review this very good video and get the tool list.

@dantemagz6672 2 месяца назад

Gotta learn how to wrench better, did both sides in my driveway along with brake pads and rotors in under 2 hours. Trucks got 300,000km in the rust belt. Heat is your friend btw, wouldn’t be able to do it without it. Don’t even have the pull the tie rod end either.