Тёмный

fpv Apex* 5 inch Frame build is it a good fpv frame for freestyle 

Datfpv
Подписаться 10 тыс.
Просмотров 17 тыс.
50% 1

Support DATfpv for all his hard work:
www.buymeacoffee.com/datfpv
www.paypal.com/donate?hosted_...
paypal.me/datfpv
instagram: / datfpv
facebook: / datfpv
twitter: / datfpv
Join my Channel: / @datfpv
Apex 5 inch frame build... *this is actually a clone frame, lets build it and compare to the original ImpulseRC Apex 5 inch frame.
APEX 5 inch 225mm Carbon Fiber Quadcopter Frame Kit with 5.5mm arm For FPV.
This is a very good quality frame kit, and good quality carbion fiber.
Secifications:
Name: HSKRC-APEX-5
Propeller: 5 inch
Weight about: 138g
Wheelbase: 225MM
Size: 130*183MM
Arms plate: 5.5MM
Top plate: 2.0MM
Bottom plate: 2.5MM
Side plate: 2.0MM
Recommended configuration: (Not included)
Flight Controller: RF/Kiss/F3/F4/F7
Motors: 2205/2206/2207/2305/2306
ESC: 30A-50A
Propeller: 5 inch
Battery: 4S 1500mAh-6s 1150mAh
FPV: Runcam Swift Mini
Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we're back with one of the most popular requests: a compact full-size remote! The TBS Mambo follows in the footsteps, but focuses on all of the things the Tango 2 tries not to have: a larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons!
The TBS Tracer (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of latency and performance without any of the clutter of choosing RF modes, link profiles. It just works. Two-way communications includes telemetry functionality and support for 3rd party autopilots.
The DJI FPV Goggles V2 with DJI O3 image transmission features high definition, low latency, long-distance transmission, and strong anti-interference capabilities. The DJI FPV Goggles Battery in the box supports up to 110 minutes of flight when fully charged.
High definition, low latency, long-distance transmission, and strong anti-interference. Battery in the box supports 110 minutes of flight when fully charged.
FPV
FPV, has revolutionized the radio control hobby. By definition, it is a method used to control an unmanned aerial vehicle (UAV) or radio-controlled vehicle from the driver or pilot's perspective. ... A live FPV system makes precise aerial photography and videography possible.#TBS #TBSmambo #TBStango2 #fpv #derbyfpv #impulseRC

Опубликовано:

 

2 июл 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 52   
@bigtastyfpv6343
@bigtastyfpv6343 Год назад
Saved my ass this video! Spent 40 mins tryna put it together 😂😂😂
@saviofpv8047
@saviofpv8047 2 года назад
I've just received it and it seems is not as easy as I thought it. Thank you for this video! Really helpful! Cheers
@Datfpv
@Datfpv 2 года назад
Glad it helped!
@Atlas_FPV
@Atlas_FPV 3 года назад
Just bought one, it looks legit and for £30 you cant go wrong
@nelsonwesterhout2588
@nelsonwesterhout2588 Месяц назад
would the old air unit fit in the new frame?
@bossanova
@bossanova 2 года назад
I have one since 18 months or so.... Very sturdy, it is mostly same size - just the back. It is a bit smaller to install a 20x20 vtx. It's possible in the Original. Workaround: higher aluminium stackpoles. Careful: 2 different sizes.
@rubenvaneupen7327
@rubenvaneupen7327 11 месяцев назад
How is the carbon quality? Did you do any crash tests?
@KonstantinFPV
@KonstantinFPV 3 года назад
I'll buy the clone when ill be building 5incher. But first i want to move my electronic to 4 inch apex to make a proper sub 250 gr. quad. (Now im using romaL4 frame).
@UNLOCKEDANDOVERCLOCK
@UNLOCKEDANDOVERCLOCK 8 месяцев назад
At $28....ill give it a whirl 😂
@k1ortia
@k1ortia 3 года назад
Thank god for cloned frames, more money to spend on decent electronics..
@Datfpv
@Datfpv 3 года назад
glad you like, thanks
@afpv2225
@afpv2225 3 года назад
Can you check if clone parts are compatible with original = is it 100% clone? For example top plate and arms. Thanks.
@Datfpv
@Datfpv 3 года назад
Hi, I can't completely compare each part and tell you if it is a perfect / perfect match hole for hole against the proper apex, the frame is a 'clone' and probably not made as spares for the original.
@kintoyajing
@kintoyajing 3 года назад
Can you put a dji air unit or cadxx vistao on the clone? Tnx
@Datfpv
@Datfpv 3 года назад
Hi - you can but its tricky... as there isn't much room in it and you need to adjust some things, see my vid here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CAmrQogEzoY.html
@xiconet
@xiconet 3 года назад
caddx vista it's easy, I have one with the caddx vista, air unit I don't know, don't have one test
@DenizhanHaznedar
@DenizhanHaznedar 2 года назад
i was gonna ask the same question:)
@semrukburkutfpv
@semrukburkutfpv 3 года назад
hey, can i use Runcam Swift with this frame ?
@Datfpv
@Datfpv 3 года назад
Hi - I have the predator mini / standard v4 in it at and that is Size: 21.8 x 21.8mm - that fits perfectly with no extra mounts - I don't know what size the swift is, but that should help you out.
@catmanfpv9213
@catmanfpv9213 2 года назад
Can motor with mounting 12x12 fit on this frame?
@Datfpv
@Datfpv 2 года назад
no mate :(
@lutfikh2337
@lutfikh2337 3 года назад
What size mounting hole fc and esc...
@Datfpv
@Datfpv 3 года назад
Hi Mate, they are Mounting Holes: 30.5mm/M3
@sochineze
@sochineze 2 года назад
is this a 1:1 clone? can i use the same 3d printed designs on this clone?
@Datfpv
@Datfpv 2 года назад
yes it is, 3d parts will fit
@sochineze
@sochineze 2 года назад
@@Datfpv okay thanks
@flowrfpv
@flowrfpv 3 года назад
Do you know the weight without 3d printed parts ?
@Datfpv
@Datfpv 3 года назад
Hi - roughly frame only: 138g
@flowrfpv
@flowrfpv 3 года назад
@@Datfpv that's with 3d parts, or is it even more with 3d printed parts ?
@Datfpv
@Datfpv 3 года назад
@@flowrfpv as far as I know that’s without I can’t weigh it again as it’s all made up!!!
@DangerDavefpv
@DangerDavefpv 3 года назад
How well has clone held up...I have a real apex but 100$ ouch
@Datfpv
@Datfpv 3 года назад
Hi, I'm doing the clone build this week, as soon as built will review it a bit more and have to do a follow up of its performance etc - the apex in my other vids is a proper 'apex'
@air21511
@air21511 3 года назад
@@Datfpv would love to hear a feed back too :) can you weigth it!?
@air21511
@air21511 3 года назад
because it says 138g in manual for it, but oem apex is 115-125g I think!
@Datfpv
@Datfpv 3 года назад
Hi all I have is the 138g weight now.. its all built up :(
@afifathnin
@afifathnin 3 года назад
hows the clone compared to the original frame
@afifathnin
@afifathnin 3 года назад
how the quality of the carbon?
@Datfpv
@Datfpv 3 года назад
Its really good, I can't fault it, you don't notice any difference when flying it at all, and the carbon is very good as well 5***** its well worth it.
@arnobvlogs2862
@arnobvlogs2862 3 года назад
Link 😬😀
@Datfpv
@Datfpv 3 года назад
www.aliexpress.com/item/4000631138091.html?spm=a2g0o.productlist.0.0.34b22355DwnfkK&algo_pvid=f67f0d89-76e5-460d-8852-11641b943d4c&algo_expid=f67f0d89-76e5-460d-8852-11641b943d4c-0&btsid=0b0a050116041448271365013edef1&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
@Datfpv
@Datfpv 3 года назад
thats where I got mine from - remember it is a clone!
@arnobvlogs2862
@arnobvlogs2862 3 года назад
@@Datfpv yeah bro.. Tnx for the link🔥🔥🔥
@BombowaKunaFPV
@BombowaKunaFPV 3 года назад
Have two of those chinese apex clones. For the eye it looks good. But on both in betaflight blackbox I have a massive frame resonance spike (about 200Hz) and the D gains go up like crazy (D amplifies the noise). FC is vibro isolated and its a fresh build and still, resonance on both...DON'T BUY that clone...
@Datfpv
@Datfpv 3 года назад
Hi - I don't believe that the frame will be the issue of the vibration, its more than likely going to be a mounting issue more than any frame issue.
@BombowaKunaFPV
@BombowaKunaFPV 3 года назад
@@Datfpv What can I tell you, Two different frames,- one has an Mamba F4 stack, 4S new motors, Rush Tank mini VTX. On the second one there is the Mamba f7 stack, 6S t-motor new motors and again Rush Tank minii stack. Both softmounted on gummies. I even screw the stack screws with metal screws, not nylon. I looked everywhere for loose wires, and that kind of stuff, even got the battery belt wraped over the top plate in the center. Tryed to losen mounts top screws so to test if the gummies work fine. Printed softmounts from the soft tpu under the motors.. I dont have to say that i screw the frame sh.. tight. On both frames both blackbox raports showed straight ~200hz resonance - its not a thorotle curved resonanse, but a straight vertical spectrum. That builds are my 10'ish drone builds and I know how to do them. And the problem seems to be in frames in both of my cases. I think the lamination of the carbon is the problem. I will do a vid abaut it later this year when I set my ImmersionRC Apex build on the same parts.
@siccyshark88
@siccyshark88 3 года назад
@@BombowaKunaFPV thats not immersionrc. Thats impulserc
@rubenvaneupen7327
@rubenvaneupen7327 11 месяцев назад
@@BombowaKunaFPV Did move to another frame and the issue was gone?
@nerdCopter
@nerdCopter 3 года назад
+1👍 i'm interested :) 💪
@Datfpv
@Datfpv 3 года назад
its worth $30 all day long!
@densh4191
@densh4191 2 года назад
Music lower, voice higher plz. I lost my hearing
@Datfpv
@Datfpv 2 года назад
I know.. can't change the vids that are uploaded though.... I'm trying to get better with the sound thing, this is an early vid.
@KODEEFPV
@KODEEFPV Год назад
Lol
Далее
ImpulseRC Apex HD DJI FPV - Full Build Tutorial
1:23:03
Просмотров 151 тыс.
Apex Evo is too popular. How dare I review it?!
21:32
How to Build a FPV Drone / Quad the ImpulseRC Apex 5"
42:17
How I Built the FASTEST Drone on Earth
14:11
Просмотров 2,3 млн