FRS / BRZ Rocket Bunny DIY Over Fender Comprehensive Install Guide 

This seriously is one of the more legit RB install videos on youtube. I like how cleanly the rear was done & how actual sealer was used instead expanding foam.

Props to you guys, it is the best job I've seen on youtube on the rear quartel panel sealling operation. It is a really clean job. Congrats. If I had to change one thing I would have first spray painted the edge where you grinded it just to be 100% sure rust won't get there

One of the best RB install videos I have seen. Made it look easy AF. Im sure there is a lot more to it but that's the same with anything when its watching a video VS actually doing it.

1) Watching this at midnight after work probably wasn't the best idea, being the considerate bastard that I am, I kept fiddlin' with my speaker's volume as to not wake up my housemates. 2) While I like RocketBunny kits, I couldn't possibly bring myself to put my 86 under the knife! 3) I surely hope he gets wheels; and doesn't use massive spacers! 4) Brilliant video, as always!

Hands down most professional install ive seen on YT.

This makes me appreciate the high prices workshops take for this kind of work here in Germany. It does require finesse and knowledge.

Awesome! I'm 15 now and planning to get this car when I turn 20-23, it's been a dream car of mine for a long time now.

To say I am not a fan of rocket bunny stuff is an understatement, that being said good job on the video and the installation.

So happy you guys didn't do this to your Scion-"all go no show"-FRS, I hope you guys do more with that thing.

What this needed was a side, front, back and birds eye view of the finished product.

I always get nervous watching people cut up cars but another job well done by Ken!

But you didn't really cover how you extended the inner wheel wells.

This is the most detailed (bodykit)tutorial video I've ever encountered in yt

Really clean and thorough work guys....best rocket bunny install i've seen to date. Hopefully you encourage other shops to follow suit.

So cool how you guys can make an 12minute episode without met getting the urge to skip some pars, It's a bit of youtube magic we still need to learn..... Thanks for yet another cool episode Cheers TwoBeardsOneCar

Ken is the rocket bunny master! 👏

great informative video. will definitely refer to it when I install my over fenders

When you rivet in plastic, you can put a washer (same size as the rivet)on the back side to keep it from pulling through. It will pull way tighter too.I used to do it when fixing bumper covers at my old shop.

Now this is professional work

I like Ken, he talks normally rather than like he is in some kind of 80s porno. One suggestion tho, 12 minutes of that music loop could make you go funny.

I bet he cooks a mean lumpia with that apron, great vid.

Another tip you can backup rivets with washers (rivet washers) so they wont pull through the plastic

Ken you the real mvp such a tidy operator

You guys did a great job installing... I just donèt understand why people insist on this kit unless their rocking some high power.

Thanks for sharing this piece of artwork with us. I learned many things from this video. 1 day I'll do mods like this on my car.

Wheel spacers are like push-up bras, they make things look good, but when you start taking things off you realize it was all an illusion.

Once again great content and very informative.Also Ken is killing it!Thanks for the vid guys :)

Ken looks like he works at home depot

really informative compared to other videos, thank you ken for the guide!

5:28 The moment the internet unanimously went "JUST GET A GUARD!!" :P

This is a really great guide on how to install flares/overfenders on any car really. Though I'm surprised you guys didn't use some foam tape or do some caulking between the edges of the flare and where it meets the original guard.

Nice to see some addressing of the water/rust issues, but I'd be gooping that thing up with inhibitor like crazy while I still had access, assuming the edges weren't welded. Hopefully those rivets are stainless!

Nice clean install, well done, Ken.

Props on the workmanship!

Ken with the snazzy apron

i did a widebody on a porsche 10 years ago. i had some really beautiful anodized rivets. seems those would give you a nicer look. on the bumper couldn't you stick a small piece of sheet metal or aluminum behind it to give the rivet something to grab?

Solid video! one of the best. explained everything really well

omg love the channel bro...I'm 14 and this is my dream car😍now I know what all somewhat to do..keep up the good work

Quality work Ken .

It is very important to use primer under the seal!

what happened to the brz drift build?

3:27 rip headphone users

About TIME!

awesome job guys it looks bad as the rocket body kit looks fucking awesome!... Super job guys can't wait to see when it's finished finished!...

Great work except no window protection with sparks flying. All those sparks leave pit marks on glass. just an Fyi

Nice work ken !

Nice job! I wish you were located local to instal a rocket bunny kit on my car !

I want these guys to install my kit!!

You sure you guys were not minitruckers first lol. Nice job 👍🏼

very informative Ken! good vid

88332 subbers, you guys deserve much more!

No "fender welting for a Toyota"?

Hurt to watch you guys cut up the car but the final results came out amazing.

Great workmanship...

Warum befestigt er die Verbreiterungen mit Nietes. Die bekommt man im guten nicht mehr sauber raus. Why the rivets on the Body Kit. You never remove them clean, so the Body Kit is "ready for the trash can" then. Other Tuner use Rivet Nuts & screws. In my opinion the better way to tighten the Body Kit.

I spy a Miata in the background! What's the story with that?

How do you know how much of the body panel to cut off? And why do you do that in the first place? after watching a few videos I'm still confused. Great video as always guys! It's the most descriptive I've seen yet!

So the rear already comes with the clearance needed for the rear tires/wheels... I'm still confused on why when installing this kit people cut it for clearance.

Looks like Ken is losing weight and hair is nicer. Dapper-lookin. Good for you bro

I really enjoyed this ! Very good job :)

Very professional. Neat job!

Really enjoy the build

damn Ken is a pro!

You mentioned modifying the front fender liner / splash guard but didn't show the process in the video. What did you actually do?

Sheet metal body kit best or fibre glass body kit best bro 🤔

I would've personnaly used a wider head aluminum rivet like Speedway Motors sells but maybe just me. Plus they come in black so they'd blend in better.

awesome job...very neat install.

really really clean job ..awesome !!

I've been playing with the idea of a RB fender kit, but I keep coming back to the idea of just buying a whole fender that's wider, and then only worrying about installing the rear RB fender. Does that make more sense or do ya'll think it would it mess with the overall look?

The rice is strong with this one.

Would you paint the fender before applying the overfender with rust paint?

Do you NEED to weld or is there an alternative to sealing the fenders after cutting and folding.. I dont have a welder 😕

i always wondered, water doesn't enter between the quarter panel and the rocket bunny?

can somebody help i need to find that front fender to the bumper extension does any body know it name or know someone please reply

In pretty sure once he sapce the wheels, hes gonna have rubbing problems. Hes gonna forsure have to cut way more of the oem body. Trust me as a fellow frs owner

I love this installation, can you do my subaru brz please?

Idk I would've just sprayed some quality 2k epoxy primer over those welds, then Add a good automotive seam sealer over, but that's just me

top notch work

Soo how does It do during the winter and the rainy season?

What size rims went back on this? Width and total size. Or what size spacers to make the offset work?

How much does it usually cost for professionals to install it?

Hey guys way you located an is the rocket bunny kit hard plastic or fiber glass can the kit flex or if you touch something you brake the kit up? Just asking befor l Buy the rocket bunny kit

Good job guys looks mint

Once the bracket for the rear bumper is removed, is it re-installed when you're finished or is there another way to pull the bumper and fender together?

Hey guys I got a V2 Rocket bunny kit on and i need help. can you please tell me how can i still keep the front fender guard liners because mine came off and now i dont know how to exactly put it back.

How do you know how far up to cut the fender and the skin on the inside? Is it just a rule of thumb or is is based off of another measurement?

i have a question,if you have a toyota gt86 and you change its whole frame material to carbon fiber,will that change the car's identity to a new car or is it still a gt86?

awesome video, very discriptive

Hey! Great video can you please link me where you got the fenders.

I'd love to see more Ass2000 track and build videos

what types of tools are needed? can you list them, please :)... Im quite new, but I plan to install a kit by myself.

Why not put a washer on the back side of the fiber glass bumper, then the rivets can be tight!

is there anything to do about the visibility of those screws? so the body looks more uniform all around

If you leave the rear fender flare off you could roll 22’s lol

I really want a rocket bunny kit for the brz. I mean, 7,000 for the kit and shipping is kinda much though. Do you think that I should save up for the kit or buy a cheaper brand? any suggestions for cheaper brands?

Great job!

Next time please cover up the car and other cars nearby. All the metal sparks will melt into the paint because of the heat and in time you will see that they will rust and start to get visible on the paint.

What happens when you need to remove the base fenders? They are now welded to the underbody....

What did you do for the side markers in the front? Take them off and their assembly or cut it off?

Can someone plz tell me what size and spec are the tires and rims all together