FrSky X-Lite OpenTX Install/Upgrade How-To (Taranis X9D QX7 same procedure)

Подписаться 335 тыс.

Просмотров 87 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
If you bought the FrSky X-Lite, you might want to upgrade the version of OpenTX that's on it. Especially if you fly FrSky R9 system, the new version of OpenTX will make the X-Lite compatible with the latest R9 firmware. I'll show you how to install the latest version of OpenTX to your FrSky X-Lite. This procedure is exactly the same for other radios like Taranis X9D and QX7 too. I'll also show how to download and install the Amber sound pack and Betaflight Lua Scripts.
Download OpenTX 2.2.2 and SD card contents at:
www.open-tx.org/2018/07/28/op...
PREFERRED: Download STM32 VCP drivers from my web site at:
1drv.ms/u/s!Al4b3QGPtgasnKBKe...
ALTERNATE: Download STM32 VCP drivers from the official site at:
www.st.com/en/development-too...
Amber sound pack for 2.2 is:
hmvc.eu/Amber22.rar
Betaflight Lua scripts are:
github.com/betaflight/betafli...
ImmersionRC Driver Fixer can be downloaded from:
impulserc.com/pages/downloads
-- PRODUCT LINKS --
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Purchase the FrSky X-Lite at:
* GetFPV - bit.ly/2MucFYX
* Banggood - bit.ly/2vSSsFt
* RaceDayQuads - bit.ly/2vKi7jm
* ReadyMadeRC - bit.ly/2vLeTfE
* Amazon - amzn.to/2vskTdD
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Most or all links above are affiliate links, and I will receive compensation if you use them.

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 349

@whitmeade4834 2 года назад

Even 3 years after the release of this video, it's still the best choice for a recap or reminder of how to update these FrSky radios. You're the man JB, and a treasure for the entire FPV community

@Jayswaychannel1 5 лет назад

It is greatly appreciated when you get very specific about the button presses and stick direction. It really helps us new guys out! I truly enjoy your content and style !! Thank you for your time and effort.

@Themflames 5 лет назад

Thank you so friggin much, your tutorials and reviews have helped me get flying! Today was my first day flying after a bunch of hours on a simulator.

@Andrew_O 5 лет назад

I just followed this video's instructions yesterday with the X-Lite I received as part of my first foray into FPV. What a process! With great power comes ... great unintelligibility and prerequisites! Huge credit though that the video was done in a purely linear fashion and with secondary hosting to make people's lives easier when going through this for the first (or 100th) time. Just following along got 2.2.3 installed on mine and it's in that from unboxed to ready-to-start-with condition in only a little more time than the video's run-time. Thank you so much for putting it all in one place!

@lucassage8820 2 года назад

Instablaster.

@grenaditfpv4217 5 лет назад

Hey Bardwell great work I know how much stress u go through to get to here thanks for this vid I already new how to do this cause I have a QX7 but great job!!!!

@hunchodav3484 4 года назад

Bardwell is so incredible man this guy has taught me so much about this hobby anytime I have problem I can always figure it out from his videos

@mcpxv2529 4 года назад

Er ist wirklich ein sehr guter Lehrer 😂😍 liebe seine videos

@mathieuf.2788 5 лет назад

I totally needed this video, just bought an X-Lite to replace my FlySky radio and there is lots to learn before I can get going with it.

@VSUPARHAM 5 лет назад

I learned something today. Thanks. You walked me step by step through setting up my new x-lite. kudos.

@paulgiusti6779 5 лет назад

Thank you for this video Joshua, I actually used it to update my Xlite, Q7 and Q7S all at the same sitting! Your videos are so easy to follow and just plain make sense. Well for me anyway.... :-)

@sebastienjurkowski 5 лет назад

That was a breeze to do, as a first user big thank you for making the files accessible and create this very detailed tutorial.

@diggy2107 5 лет назад

Joshua this is my first taranis I ever had and I did everything on this video, thank you so much for the video because this is all new to me, I am so happy thank you

@Herbflyinghigh 5 лет назад

I know I'm late to the party but I just followed your video to set up my x-lite and I just wanted to say thanks, you always make it easy, you see I'm not a computer person so I need step by step instructions, so thank you J.B.👍😎👍

@JoshuaBardwell 5 лет назад

Glad it was helpful :-)

@fabkuzko283 5 лет назад

Hi mate, I was stuck there for a bit trying to get my radio up and running and thanks to you I was able to fix all that. You are doing a great job there, and thanks.

@ElmersFPV 5 лет назад

The way how you explain things is so awesome!!! English is not my motherlanguage but it´s so easy to understand you + follow your instrictions :D Many many thanks and greets from germany ;)

@mikeystokes9403 5 лет назад

Appreciate the knowledge Joshua Bardwell without you and Blue Falcon I don't know what I'd be doing now probably going crazy keep up the good work definitely learned something today

@cfrankfly 5 лет назад

You are Easy to listen to, concise and cover everything I need! Thanks Jason! (I'm a geek too, watching a Master geek lol )

@JoshuaBardwell 5 лет назад

First time anybody ever called me concise, but hey I'll take a compliment if it's offered.

@RedCapJuice 5 лет назад

This was kind of like a fun little treasure hunt, gathering all of the files. Thanks for the video! Now I have a radio with a bunch of stuff I don't know how to use!

@rave5636 5 лет назад

Hi JB, many thanks for this - like your style to explain - great job!

@haroldland4620 5 лет назад

Thanks for the careful handholding :) Process completed successfully

@17kHz 5 лет назад

Thank You very much. This is So Helpful video. Whole process completed successfully on my new, just arrived, X-Lite

@jaydicenso 5 лет назад

Thanks Bardwell! I'd be so hesitant to upgrade my stuff if it wasn't for your comprehensive videos!

@goosesyoutubechannel7388 5 лет назад

Excellent and thank you. Incidentally, the only SD card I had was a 64GB one and it couldn't be read... possibly too big. Smaller card worked. Thanks again.

@michaelheltz8867 5 лет назад

I just ordered mine. Now I'm ahead of the game. Thank you.

@mattreyes79 3 года назад

I just purchased this radio. This video is very informative.

@LucianFNGFlaitz 3 года назад

Still relevant to this day for me. Thanks bardwell

@DanielBrassard 5 лет назад

Great video again, JB. Thanks. I did a whole thing with putting it in bootliader mode by pressing all 4 d-pad buttons and whatnot. Also, my SD card contents came with a very nice voice pack. I added Amber to my QX7, but it never worked. I think I used an 8-character version rather than 6-character. My X-lite set up easy and clean, and my QX7 was a bastard... but I’m a lot better at it now. :)

@gqp3215 5 лет назад

ive had a dozen computers throughout my lifetime and never learned basic computer use. with this vid i downloaded your stm file and got the CLI dump on my new tinyhawk. now to figure out the new qx7. i have a lot to learn, have several 5 inchers built and several other frames i got cheap, ebay.this hobby is about 10 times or more complicated as racing rc cars on road asphalt and ozite carpet. look up vids of twelth scale carpet nationals. look forward to racing drones @61 if i can figure the computer part out. being very specific with instruction is usually best. hope to hit a kwad camp at your house. i live due east other side of sams gap on 26, after i learn a little more. you the man

@waynesrcspin4827 5 лет назад

Awesome this is the first time I have ever installed firmware on a controller and it works perfect, thanks so much Josh. I have no idea how to use and adjust PID settings on my controller but I will watch the video you suggested and see how I go. Thanks again mate.

@collinallen5356 5 лет назад

Wayne's RC spin what video was suggested? I need to learn all of this as well

@waynesrcspin4827 5 лет назад

Yes good question Collin Allen... in the video Joshua said he would link the video on how to use Lua Scrips but he didn't...(Bad Joshua) If you just type Lua script in the search on Joshua's page it will bring up part 1 & 2 on how to use Lua Scrips. hope this helps

@waynesrcspin4827 5 лет назад

If your looking to set up the xlite to the Freerider simulator check out "Painless 360"video on it. I followed it on the xlite even thought it is for the X9D+ and it works great. Sorry Josh promoting someone else's channel on yours, but life is about helping all. My xlite is working fine for everything now, got all of my models set up. For anyone interested no you cannot put your sim card in from your X9D+ and transfer your models across. I know it sucks ass. But you'll know your way around your xlite real fast binding them all over...lol

@rohansully584 5 лет назад

Champion 'How-to' JB. Many thanks

@alrozanski8352 3 года назад

Superb video Joshua.

@rmcmillegm 5 лет назад

Thanks Joshua! I hate doing these upgrades and you walked me through it. Amber doesn't have that edge on her voice, which is nice. Now I have to figure out how the BG Lua Scripts will be helpful to me!

@alanjones3514 5 лет назад

Nice video, can’t wait for your review

@ming00n 4 года назад

Thanks heaps for the tutorial, saved me a ton of time!

@JaredWhittle 5 лет назад

Thank you for adding the driver section, even though it's something everyone should know by now. I just reinstalled Windows and needed that link and this video reminded me I need to do that.

@Man-Time 4 года назад

Thanks so much for this and all your informational videos. I would have sold all my new stuff without you!

@gattenmattie3080 4 года назад

thank you so much!!!!!!!!!!! now i can fly with my d8 drone!

@pewwbz9647 5 лет назад

Thank you so much for this tut!

@edrone_ 5 лет назад

13:36 hmmm?... I wonder why bardwell goes incognito? Lol just giving you a hard time great explanation as always!

@thenatedog 5 лет назад

looking forward to the r9 range test!

@Bondo3232 4 года назад

Thank you...........I’m fairly new.......started to build my own quads.....I was having trouble installing downloads on the radio.....I was using a 64 g sad card........I copied and transferred to a 32 g sd card......installed it in radio and it worked.......!

@konradhryniewicki7956 4 года назад

who uses 32 or 64gb card for radio xd

@thaANGRYape 5 лет назад

Thanks for the video, helped out a lot

@LocoBeeFPV 5 лет назад

Joshua you are my superhero!

@geeznogoodname 5 лет назад

Yeah, instead of upgrading the firmware by just plugging the xlite into the pc, I just did it "the old fashion way" by going into the radio bootloader. On the xlite you hold down the "D-Pad" and press the on button. Then just connect it to the pc and flash... easy peasy! Maybe because I've done this with other Frsky radios it works without having to mess with Windows drivers or ImpulseRC? Anyway, THEN I came to this video which was good because I forgot all about the BF LUA which would have been a nightmare not to have it out in the field!! Thanks Mr. Bardwell!

@hakonmoeberg1997 3 года назад

Thank you, this really helped☺️

@rdubs1705 3 года назад

Hey Josh, I'm excited to fly my new collective pitch heli with my X-Lite :P

@mikeknight4337 Год назад

bf folder wasn't in the 1.7(current) but went back n got it from the 1.2 still working such great info still in 23'

@MrMrluo 5 лет назад

great video !very helpful !!!

@liamchisholm 4 года назад

Had issues with Betaflight TX Lua Scripts 1.5.0 here on the X-Lite where the pid screen would not load after following your steps and holding down on the joystick (Got some weird message instead). Loaded version 1.4.1 onto the sd card and got it to work. Thanks for the tutorial!

@PeterDenTV 5 лет назад

Lol! Amber.. If only it was.. Oh well I went too far already! Man that radio is sexy, I got a white Q X7 and now I wanna change for the X-Lite... 🤔 I'm patiently waiting for your review Joshua 👍

@KaossFPV 5 лет назад

i just got a x-lite yesterday.. i'm thankful to have you JB, because this thing confuses the sh$^*$ out of me :p so many options compared to my old fs-i6x. i spend an hour yesterday trying to bind it to my hawk5 and setting up a arm switch XD

@sneeakysteve 5 лет назад

Kaoss I did the same when I got mine haha

@KaossFPV 5 лет назад

my old flysky just had a bind button and that was that :p but besides it being a lot more complicated i really love the x-lite :D been rippin for 4 days straight and not 1 cramp in my hands and the amount of control i gained is bizar :D

@sneeakysteve 5 лет назад

Kaoss that does sound nice and easy haha, I came from a bugs 3 controller and those little tiny ones that come with the e011, the difference in accuracy and feel was night and day! At first I was so confused why my switches wouldnt register on betaflight and then I learned about mixer finally, lol I felt so dumb

@sirstretchyboy69 5 лет назад

Yeyyyyyy ive been waiting to see you with the x lite 😁 hopefully i can see myself with one somtime

@jorgeo2970 4 года назад

thanks... great video and all set

@ascensiongodoffleetcommand7930 5 лет назад

thanks! this was helpful!

@aarontest7152 5 лет назад

Do I need to set anything different in companion for LBT version? So happy you posted this video. My X-lite is arriving tomorrow with some r-xsr's 😃 Josh, I know you are a busy man but could you attach the links to the description please...

@uwtab6898 3 года назад

I was so confused when you suddenly didn't mention anything about inserting the SD card in the X-Lite. But I luckily figured out that I had to put the SD card inside and it automatically updated the X-Lite. Maybe something to mention in the video? Since I had the SD in the computer to put all the files on there.... like you said is quicker.

@george1gall 5 лет назад

Props! Thank you, all the work was done by you, now I (and Amber) can go play... ...gimbal springs feel kinda loose, wished my sticks were stiffer...

@marcmc9304 5 лет назад

Thank you so much for your help Bardwell. I was able to update the firmware however the audio was not working and I then discovered that I was using an SD 64g card but that size was not compatible so I ended up using a SD 16g which worked. Keep up the great videos. Do you have coupons to help support you when making purchases on line?

@enricsoh 4 года назад

Thanks for the great video. I am new to the hobby and just updated my Taranis X Lite firmware. Now it will not bind to my Modular 6 - any ideas? Thanks for your help. Cheers

@AdrianoCasemiro 5 лет назад

I love the design of the Xlite. Feature packed and very small. I think I'll wait your tests with R9 module before I bite the bullet on this one. Getting it to tun Open Tx is nice, but I really would like to know your thoughts on how's life with it and 900 mhz module (range, battery life, the whole nine yards). As always, I learnt something today. As a Linux user and a fellow weirdo, I understand you need some quality time with Amber. Get a room, or a ticket to the Mile high club. Thank you.

@b00bsFPV 5 лет назад

the emax-satomi sound pack is pretty cool.

@williamstewart5635 5 лет назад

I have been on the fence about buying a FrSky radio so now I have the definitive set up guide should I get the Lite or the 9 w/ Hall effect gimbals? Hurry up, I have the money, need to learn asap.......as usual, inquiring minds need to know. Great that you have taken the time to update the constant changes that influence the hobby.

@MrMkeup66 5 лет назад

William Stewart why would you ever be on the fence buying a Frsky...

@williamstewart5635 5 лет назад

Mike K - I have a couple of high end JR radios, I can program in a matter of minutes, they work for everything other than telemetry, etc. The programming for FrSky is complex in order to get anything to work for someone who has never done it. Still on the fence.........I know those who have them love them, thinking.........still

@nev5238 4 года назад

Thanks so much for this video!! So I gather that the SD card that you use has to STAY in the Transmitter and is not just used to transfer the files over. That was unclear at first but I guess it stays..

@mcpxv2529 4 года назад

Wirklich heftig👍💯

@Zedorek 5 лет назад

i fly with x-lite for a while now and i'm not returning to my taranis x9d. The only downside I had was i had to use the channel mixer to have my AETR or whatever match with the betaflight ones. not that it is a big deal but i had to do that.

@cesarprieto652 4 года назад

Fantastic!

@osker26g83 5 лет назад

Please do a great freestyle build video

@daddy_loves_quads135 3 года назад

watched this a few times. Ha always need to refresh my memory because its like 6 to 9 months between flashing for me. But someone really needs to make a JB sound pack. Take sound clips from all his videos and we ought to have enough to get most of the sounds we need.

@My_Alchemical_Romance 3 года назад

THANKS BARDWELL!!! -N00b

@michaelclark5757 5 лет назад

Thank you!!!

@Pilesofplenty 5 лет назад

Had to put the folder contents in its proper place on Win7. It didn't ask to merge, only overwrite.

@gregorytesoriero6581 Год назад

We were all noobs once...its my turn. Can ya help me get my Taranis X-Lite and my Tiny Hawk Freestyle on the same firmware. They used to work fine together until I pulled them out after a year or so and decided to update firmware on the TX and RX to freshen things up. I can't bind anymore with any of them. Not sure how to match firmware on both tx and rx. I used the latest of both I believe ... I used Betaflight and Open TX companion... Even a link to the right RU-vid video would be great. Preferably by JB Thanks for all you do Joshua, You are the easiest guy to follow. ⚠

@marcfauve6971 3 года назад

Mega Merci !!!! un bisou a amber de ma part

@pellejonsson4413 4 года назад

awesome job! but can i tick the same boxes if i want to have my crossfire lua scrips?

@mike216ism 3 года назад

Hello JB, loving your 51477. I updated every radio I have to 2.3.10. After reading BF tuning notes I'm attempting to have smoother RC signal for feed forward. Have you noticed any improvements from radio updates?

@potkill 3 года назад

I forgot how so for anyone who was like me who was scouring the internet and searching comments for "x-lite s", you gotta hold the trim (plus pad) in the center to hold all 4 down at the same time as you power on the tx to get into bootloader or whatever mode

@xxxkahunaxxx 5 лет назад

i had to power on tx in dfu mode...without powering on i got error "cant extract RADIO/radio.bin" and it would not flash

@rolandburrows4859 5 лет назад

Thanks for this. Can you take the SD card from the X9D and plug it into this one and use the x-lite? Will be traveling and plan to take a quad, not the X9D and collecting the x-lite when i arrive.

@brandonwoodford579 5 лет назад

perfect, seamless upgrade to 2.2.2 in 15 min! Hahah and now to 2.2.3stable in 3 min.

@paulm1606 4 года назад

Josh, can you add a link to the video for setting up the lua scripts which comes after this video ? i hear you say at the end of this vid that you will put a link in the description but i could not see it so if you can link it for us to follow this video that would be great thanks again.

@Duncan268 5 лет назад

helpful !

@checkeredflagfilms 4 года назад

oh boy, happy to be a mac user.

@stoempie73 5 лет назад

is the problem with the lua script fixed in the 2.2.2 and do i need to upgrade if i have 2.2.1 of XD9 SE?

@jasonford9500 5 лет назад

Great videos. I learn something every time. Do you think you could do a video about binding the X-Lite? When I bind I only get 8 channels option. Am I suppose to choose 1-16 in the radio? Doesn't RSSI need a channel? What if I need more then 8 channels. Betaflight tuning notes say if using 16 channels to change the filter Hrz. Im confused. Thanks, keep up the great videos.

@JoshuaBardwell 5 лет назад

I think you mean the dialog box that asks 1-8 Telemetry On / 1-8 Telemetry Off etc. That option is only really relevant if you are using a receiver with PWM outputs, which you probably aren't. For a mini quad using SBUS or FPort always just select 1-8 and telemetry on or off depending on if you want telemetry (and if your receiver supports it).

@jasonford9500 5 лет назад

Yes, that is what I was referring to. And if I select 1-8 channels on the radio. One of those channels need to be used for RSSI to OSD?

@alessandrocalabro9807 3 года назад

what if I have a Taranis qx7 with access+accst D16 and LBT? i'm trying to bind my emax tinyhawk 1s and I can't figure out how to do it properly. Any suggestions? thanks for the video man!

@jochen970 5 лет назад

Make sure to check the Multimodule option if you use the IRX4 module.

@phillipescalante1254 2 года назад

hello, So for the first time I was trying to update my Firmware on my frsky xlite S and bricked the controller. then I was able to flash it back to life. then I wanted to try and still update it with the correct firmware. but now my D Pad may be stuck and I can't access the boot loader mode. I was wondering if you had any tricks or videos to help me with the D pad repair? or if I just lost my boot loader and my controller is toast? thank you!

@jonathanpalaisy608 3 года назад

Was playing a Sim and forgot to unplug the X lite afterwards and bricked it... after doing everything you said to do in one of your videos my remote was fixed! HOWEVER the Aileron(roll) part of my right gimbal reads that it is stuck left even when the stick is centered.. I tried factory resetting it, re-flashing and calibrating the remote without any success... any advice on what to do before buying a new radio @Joshuad Bardwell?????????

@davidharris5045 5 лет назад

Love your videos, very informative. So, I followed all these directions, and I flashed new firmware to my FC (SPracingevo 3), and bound the XM+ receiver in D16 mode..... motors spin up in Betaflight using sliders, receiver tab shows the 4 channels of the receiver are talking with the XLite controller. None of the switches work on the mode tab, and the radio won't move any of the motors, either in Betaflight, or disconnected from the computer. I even rolled the FC back to older firmware.... what gives?

@JoshuaBardwell 5 лет назад

You need to set up the Arming Mode to one of the aux channels. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xs8tySubJ74.html

@DRTOLLZ 4 года назад

I have the jumper t12 and the current version is 2.2.2. Right now I don't see any sound packs or sd card content on the opentx site to download for that version. I'm hesitant to upgrade to a new version for fear of losing my models. I really only wanted the voice commands. Is there a way to get those without upgrading firmware?

@andrzejkwiatkowski5453 4 года назад

I have a question about the Eachine Novice III model. I have a question. Can you restore the factory settings in the ER8 transmitter again? Just like it came out of the factory. I mixed up a bit on the ER8 menu and now the drone does not respond to its arming (SWA Arm / Disarm)

@blalien777 5 лет назад

Hi Josh, I'm in need of your help with the 3 position switches they both work from 1000-1500, but not 2000. I've looked all over the internet for information on why this is so with no good explanation. Please help.

@MCsCreations 5 лет назад

Hey JB, to flash the X9D do I need those drivers and driver fixer? What about the models and so on of the X9D, what should I do?

@JoshuaBardwell 5 лет назад

X9D flash is identical except you choose a different radio type in OpenTX and download a different SD card contents. If you are on 2.X then the models should not be affected when you upgrade.

@MCsCreations 5 лет назад

Joshua Bardwell Thanks a lot, JB! 😊

@brandonwoodford579 4 года назад

Hey Joshua, ive been on opentx 2.2.4 with a x9d SE, pre2019. Is it ok for me to upgrade my transmitter to 2.3.x? Will I have to rebind any of my frsky receivers?

@fpvarborist7436 5 лет назад

Sweet

@66g66g66g66g 4 года назад

mac users, i did a thing, i did a whole thing by myself... well i followed the 67 steps of this video but i did 1 thing by myself, when chucking the file onto the sd card, the transmitter wont recognise it unless you expand it so youve got a few files and bits, then you need to copy/ move these and only these onto the sd card. if you close it then open the sd card the first thing you should see is folders named "script" "models" ect, hope this helps

@kako1775 5 лет назад

opentx 2.2.2 stable is available

@khoirudinelektronika1870 3 года назад

hello joshua bardwale, my name is khoirudin, fpv pilot from indonesia, i have taranis xlite with r9m lite module and slim r9 plus receiver immortal T TBS ANTENNA, firmware fcc, horizontal antenna position, front and back in quad. having flight distance problem, RSSI drop at 40m distance so easy is failsafe, is there something wrong with the wiring? Or the settings? If you have experienced this, please explain to me, thank you🙏

@paulm1606 4 года назад

Hi Joshua, great channel always use your channel to LEARN SOMETHING NEW!! lol but just watching your set up for x lite on open tx companion profile page ticking lua,luac, noheli etc i noticed at the bottom were it says default channel order a lot of other streamers change this from the default RETA to AETR or TAER saying it will save time when binding micro quads etc, i noticed you left yours as default RETA does this make any difference ? many thanks Paul from UK

@JoshuaBardwell 4 года назад

The bottom line is, it must match what's on the quad. You can change the default to match Betaflight or you can change Betaflight to match the radio.

@paulm1606 4 года назад

Joshua is it possible you could cover how to flash and update the irangex irx4 lite module using the github website, there are no other streamers who have covered this but i always see people asking the same question . Thanks

@HansWurst-ed5xs 2 года назад

Can anybody help me please. I don't know witch SD Card content is the right for the x-lite pro. I see only for x-lite and x-lite s.

@HomoHereticus 5 лет назад

Hi Josh, hi everyone, I am very excited to get into this hobby. I have just got myself this radio and a tinyhawk. I have followed your instructions to the letter, I also followed the binding process but it won't bind with the tinyhawk... I don't know why. The receiver is good cause I got the hawk from a guy who installed mockingbird on it and had no issues with binding. I would very much appreciate some advice. Thanks for all the great work!

@JoshuaBardwell 5 лет назад

You need to bind in D8 mode.

@HomoHereticus 5 лет назад

@@JoshuaBardwell I got it! Thanks a bunch, let's get this hobby on the way!