FSGT5 in the SCX24, how I set up 4ws 

I know I’m late to this video. Bu man! This answers all my questions for setting up my rear steer. Couldn’t have been explained better. Thank you!!

Ordered mine some days ago, and now I'll watch your video

This is so much easier than rear steer with the Spektrum. Thanks for showing. Helpful again

Thanks man, i didnt even think of running rear steer on the knob!

Wow! Amazing controller with the Furitek esc aws and motor. Its a dream. Thx for the review

Hell yea Matt! Thanks for all your guidance and insight. You save a heck of a lot of time for us noobies. Cheers brother!

the gt5 is awesome because of the 4ws. but the best use of gt5 is the servo knobs. so you can independently steer the rear while steering the front at the same time. not a lot of transmitters have knobs so easily accessible

I'm I'm hyped you made this video. I just got this radio system and would like to swap over my 24 as well.

Thanks for making this review. I’ll be buying one. My scx has been in pieces for over a year because I wanted 4ws but then realized the stock remote was only full left or right and how impractical it was. Also couldn’t get it perfect straight. Your videos are great

Super helpful video Matt! Been looking for a 1 stop TX and rx combo to resurrect some of my old rolling chassis (and no doubt in preparation for future crawlers and bashers now that I'm back in the hobby ) the flysky looks like just what I need !

I went with the radiolink rc6gs v2 and got the 4ch reciver. It's super customizable.

very very helpful explanation!

Got 4ws on my Scx24 just not proportional steering….but awesome works great too.. 👌🏽👍🏽🤙🏽✌🏽

Thanks for another great video Matt! I have been looking for a better receiver to replace the stock scx24 receivers in my rigs and this seems like a really great option!

Really helpful fella, much appreciated. Love the gt5 also, totally agree with your comments. A

My order is in. Thanks for the video!

Hey man, first of all love your videos. My question is what ESC do you use?

It's probably a little late but you can change the color of the lights by holding the back button and rotating the little dial

I was a complete noob to the micro crawlers so there’s still some things I have yet to learn... that said, I’m about to start the 4xsteer mod and a little confused! I have the Furitek lizard in conjunction with the stock Esc. What will need to change to use this transmitter? Do I need the Tegu? You are my go to guy for everything SCX24! Keep up the great content!

Dude, Awesome video, I just bought a Redcat Everest 10, Gonna get this radio for 4 wheel steering.

Cool, nice controler 😃👍

I use the RX6R receiver and TX16S transmitter for mine

THANK YOU!!!

How would you run 4ws using channels 1,2, and 3 but still have lights on/off?

So I purchased the micro crossover receiver and can not get it to bind to my flysky 5 and it's the flysky one

Hello sir, can i make this 4ws control with knob like yours but with different brands like dumbo BL3F (3 in 1) and Transmiter dumbo X6. ? thank you

love mine

Great info, awesome vid man! Have you tried a Cable Cuff on your transmitter wheel to assist with one handed driving?

my steering control is throttling the truck? how do you change channels ?

What cage set up are you running on the silver rig? Its pretty slick

Hey Matt, been awhile since this video was posted. Had a question about the crawler mode on this controller, is there a way to change what channels the crawl mode uses? i love the control of having it on channel 6, same as you, but sometimes it would be convenient to be able to turn on the crawl mode sometimes. so was wondering if there is any way to change the crawl mode to basically take over channel 6 instead of 3. and then once you turn off crawl mode, it goes back to the knob.

Awesome video. I just picked up this tx/rx. I want to use the channel 3 set up to use the preset crawl mode. My question is how do I set the end points for the rear servo it keeps pushing even tho the wheels are at lock. I’ve set the front end points already but confused on rear points.

Bummer so its not possible to dedicate ch6 to full 4WS setting ? What radio would you recommend for that?

I enjoyed the explanations of all the features, but I have one question: how do you use one radio on different rigs? After you set up your different profiles, do you need to bind it every time you switch to a different rig or is there a simple way around it that I am missing? Of course, I can bind all receivers to the one radio, but that would prevent me from also having another radio available for guests. Right now I use 5 different FSGT5s on my 5 rigs and every time I switch rigs I also switch radios. That means if I carry a spare truck on the trail I also have to carry the spare radio or re-bind in the field. And that is painful with some of the waterproof receiver boxes. So far the only simple way out I can see is to run the leads from the bind plug to an external switch to put the truck into "Bind Mode". I am still looking for a simpler solution, otherwise I really love the system.

Hi Matt, great tutorial. I also have the gt5 for my boat and arrma truck. I'm new to the brushed scx24, can I just remove the supplied rx and connect up the flysky rx instead? ie, do I just connect the motor / servo's etc direct to the BS6 and supply it with 5v using a dc buck? Thanks for any advice.

If you jumped the channel 3 to channel 6 could you do the best of both worlds and have the knob and control with the wheel?

Does this radio and receiver pair well with the furitek electronics?

EDIT: May have figured it out esc goes into channel 2? servo goes into channel 1? quick question sir, my tegu comes in today so im wanting to get it up and running with my GT5 and the BS6 rx receiver, eliminating the stock esc/rx combo on my jeep. What channels did you plug the TEGU and Front servo into? Thanks in advance!!!!

My fs gt3c can do it off a switch where you thumb is, left rear middle 4 wheel and right front, up on top crab mode

What channel do you plug the lizard in for that transmitter?

I'm still trying to figure out how to bind gt5 to scx24. My 1/10 seems so simple

I would just use the 3rd channel in the stock reciver

Very new to RC so bare with me. So can I replace the stock receiver/ESC on a SCX 24 with this receiver and be good to go?

Are you using the FSs bs6 receiver that comes with it?

Can this transmitter be used with the FCX24? If so how would you bind them?

Can I still bind the original scx24 controller to that esc ?

Does “crawl” mod need to be in ch3. Or could u plug it into ch4?

Can you use the 4th channel to cycle through your modes?

Can the flysky be setup be used on brushed?

I cant control my throttle on my scx 24 do I need something like a furitek lizard

are the element compatable with that controller?

Thanks for the video. I have a DX5R now. HATE it. It’s an absolute bitch to program and operate. Whoever put that stupid touch selector pad on there should be kicked in the nuts repeatedly. I was considering ordering this receiver. You sealed the deal for me. Thanks!

🤘🍻🤘

Thing is junk, I bought one, 6 channels receiver. And only two channels work. Checked the reciever all is good. Order another reciever 4 channel. Still only 2 channels work

Wow! less than 70.00 bucks now.

First viewer! 😁

Dang I just got one for $51, guess I got a deal

Nope!!!! Dumbo rc is wayyyyy better