Full LED Glory - Master Grade Dom 1.5 Customized Build 

Gloss clear - panel line - decals - matte clear

@@comradegunpla thank you so much

Zeon all the way for me, but tbh as long as it's memorable I'm down for any suit

It all depends, acrylics should be somewhere around 4:1 (paint to thinner) and lacquer is somewhere around 1:3, but the best thing to do is just testing as you go. You can always adjust pressure on the compressor too. Basically, the stronger the pressure, the “wetter” the paint will come out as, so just play around until you get something good. If the paint doesn’t flow out smoothly and evenly at your desired pressure (I usually go about 15-20 psi for a flat coat) then you need to thin a bit more, or turn up the pressure. If the paint is too wet and is pooling, you need to add more paint or drop the pressure. It all comes with experiences, just practice on a couple of spoons first.

@@comradegunpla ty

GP01 and GP02, Guncannon, Kampfer

@@comradegunpla what grade?

@@decisive_battle3565 master grade, which is why I’m super excited for the new Naoki Kampfer. Definitely gonna grab that