Тёмный
No video :(

Full Service: Tecumseh Engine on Older Craftsman Mower 

The Lawnmower Lady
Подписаться 21 тыс.
Просмотров 12 тыс.
50% 1

Learn how to service this older Craftsman mower, with a Tecumseh engine; including a few unexpected surprises. These Tecumseh engines were popular on many older brands like Murray, Toro, Sears, Troy-Bilt, MTD and others.
Self leveling cross hair laser: amzn.to/3TtDP5I
Champion RJ19LM spark plug: amzn.to/3yUvAWE
Tecumseh no. 35066 air filter: amzn.to/3yUvAWE
SAE 30W Small Engine Oil: amzn.to/40gSi7h
Tri-FLow Superior lubricant: amzn.to/3lawVW0
00:00 I'm not Norm
00:58 Drain oil
01:59 Pull spark plug and check blade
02:57 Check for bent crankshaft
03:42 Pull shroud to check flywheel key
05:03 Inspect and lubricate recoil starter pawls
05:58 Inspect flywheel and key
08:13 Refill engine oil and replace RJ19LM spark plug
10:03 Remove and replace blade and blade adapter
10:25 Check oil level
11:18 Replace air filter
12:53 Check fuel and carburettor main jet
15:04 How to determine correct carb bowl orientation
15:53 Lubricate cables and wheels
16:38 The Money shot
The tools I like and use most often:
Magnetic spark plug socket set: amzn.to/3CzmpvO
Tachometer: amzn.to/3sHibiH
Vessel Megadora JIS screwdriver set: amzn.to/363RFqO
Channellock Bent Needle-nose pliers: amzn.to/3I5DbnA
Long 1/4 Quick-connect Torx Driver Bits: amzn.to/3HUNgnm
Spark Tester: amzn.to/3CxW2qi
OTC Leak-down Test Kit: amzn.to/3CyUhJn
Compression Tester: amzn.to/3IWd6sp
Wear your safety glasses, or you'll shoot your eye out. Try on some gloves. Take off that spark plug boot. Clean your room. Open the windows, those fumes are nasty. Just 'cause I do it, don't think it's the end all, be all solution. There's plenty more ideas out there, I can't take responsibility if you slice off a few fingers after watching my videos. And don't just pour that toxic stuff down the sewer or in the ditch, dispose of waste responsibly. Just be safe, OK?
Follow along with me elsewhere:
/ thelawnmowerlady
the-lawnmower-lady.blogspot.com/
Titles, opening graphics, and music by AbleVFX.
Any links to products are likely affiliate links, and I may earn a small commission from qualifying purchases (Thank You!), with no additional costs to you.
Disclaimer: The content of this video is purely for my entertainment, and is available to you for informational and educational purposes only. It's not substitute advice from small engine mechanics with professional training and certifications, nor does it create any kind of relationship between the The Lawnmower Lady and you. Your situation may be different, and the The Lawnmower Lady makes no warranties, express or implied, as to the fit, accuracy, or applicability of the information shown in this video, and implies no guarantee of results. The Lawnmower Lady and any sponsors of this video are not liable for any damages of personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any parts and procedures represented in this video. You are using the information presented in this video solely at your own risk.
#lawnmower #smallenginerepair #DIY

Опубликовано:

 

5 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 151   
@TheLawnmowerLady
@TheLawnmowerLady Год назад
If this video helped you, please consider clicking the "Thanks" button above. 🙌 Watch this video next for more info on that cross hair laser: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NLRlfH5kXH4.html
@TecumsehRulesbcserk
@TecumsehRulesbcserk Год назад
These Tecumseh vertical shaft L heads are some of the best mower engines I’ve ever owned.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
When taken care of, they do last. Thanks for watching!
@garygary8645
@garygary8645 Год назад
I'm also a Tecumseh fan. When you give them a bit of maintenance, they run great. Thanks for the video, Stella
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Yes they are! I appreciate you watching.Cheers!
@BrucesShop
@BrucesShop Год назад
All the tecumseh motors I have worked on and did not know about the F on the bowl. Thanks
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Hola Mr Bruce! I kind of figured that out on my own. I've scoured many a service manual, and never saw mention of that. I can't figure what else it would mean? On the older brass floats, you could see a witness mark from that divot to determine the orientation, not on the plastic floats. Cheers.
@biggaspirit1
@biggaspirit1 Год назад
Good video, thank you Mrs Lawn Mower Lady.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Cheers! I appreciate you watching.
@henrymurawskibigdogrepair
@henrymurawskibigdogrepair Год назад
Stella I like the laser great work
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Cheers Mr Hank! That little laser is great. I almost didn't link to that video. It was my first published, LOL. Lots of changes since then.
@mickhardie7806
@mickhardie7806 Год назад
Great Vid Stella, I learned something from you today
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Gee, thanks! Cheers!
@robcole332
@robcole332 Месяц назад
What a difference. Great find lady.
@jimbrewer2893
@jimbrewer2893 Год назад
Good find on the loose blade. Good to see you Stella.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks Mr Jim. Cheers!
@JohnnieBravo1
@JohnnieBravo1 Год назад
You just earned MAJOR kudo's!! You are the third person in the world I ever saw uses TriFlow! There's ME, a bicycle mechanic that turned me on to that stuff years ago, and now YOU! Pricey, but it works where others fail. I recommend it to anyone who'll listen to me.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Ha! Thanks, I use it cause the bicycle guys use it. A small can lasts me several seasons. I appreciate you watching. Cheers!
@dfields9511
@dfields9511 Год назад
Great job there . The first mower I fixed was that exact model of Tecumseh Engine.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Cool, thanks for watching. Cheers!
@Big_Johns
@Big_Johns Год назад
Nice work Ms Mower Lady, sounds like its running great now. 🙂👍
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks 👍 Mr John. Cheers!
@haneyoakie14
@haneyoakie14 Год назад
1:40 that painters tape idea is a great tip. I will start doing that. Thank you!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Deliver a mower back to a customer once without oil, and I swear you never will again. (Ask me how I know, LOL)
@haneyoakie14
@haneyoakie14 Год назад
@@TheLawnmowerLady oops.
@dirtyberniesgarage1194
@dirtyberniesgarage1194 Год назад
Great job on the fix! It’s to bad that Tecumseh gets such a bad rap, I think they are great engines
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I think most of the Tecumseh hate is from Europe, those were made in Italy, and unlike the pinnacle of scooter manufacturers in the 60s (think Vespa and Lambretta), everyday was Monday at the Italian Tecumseh factory. Heh!
@ClassicTVMan1981X
@ClassicTVMan1981X Год назад
My 1984 Toro with its TNT100 is still going strong!
@TLMD
@TLMD Год назад
Great job as always Stella! Keep up the awesome work young lady!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you Sgt! Will do!
@wallacetom1
@wallacetom1 Год назад
As usual professional video. Keep up the good work. thank you Lawnmower Lady.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you! Will do!
@jcondon1
@jcondon1 Год назад
Good catch with the blade. I thought it was going to be an internal engine issue.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Yep, I cringe when they say "I think I hit something" Thanks for watching. Cheers!
@KensSmallEngineRepair
@KensSmallEngineRepair Год назад
Love the laser trick Norm!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
It’s a time saver for sure!
@JustHereToWreck
@JustHereToWreck Год назад
Lawnmower lady, you are awesome! 👏
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Wow, thank you!
@patthesoundguy
@patthesoundguy Год назад
I love those old Tecumseh engines, I love the carbs because I can usually just drop in a 631021B kit in them and maybe a new primer and they are good to go. I absolutely love your laser rig and your large tray for under the mower while you change the oil. Two great ideas!!!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Cheers Pat! Those get a bad rap, but I honestly don't have that big of a problem. I appreciate you watching!
@ChubbyButcher
@ChubbyButcher Год назад
GREAT JOB STELLA.. I myself like these old craftsman.. with regular maintenance they run forever and forever. They are beast. CB
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks!!! I agree 100%
@nashguy207
@nashguy207 Год назад
Good job as always Stella!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you! 😄
@thebeardedstork432
@thebeardedstork432 Год назад
Nice thorough job! Thanks
@TheLawnmowerLady
@TheLawnmowerLady Год назад
My pleasure!
@almclean4835
@almclean4835 Год назад
When you first started it, i thought the blade was hitting something. You did a thorough investigation, Mr Klem will be impressed😁 Great to see you back posting videos
@TheLawnmowerLady
@TheLawnmowerLady Год назад
LOL, Thanks Mr Al.
@crisprtalk6963
@crisprtalk6963 11 месяцев назад
I worked on a 24 year old craftsman today with 6hp TEcumseh. Runs well.
@TheLawnmowerLady
@TheLawnmowerLady 11 месяцев назад
I don't get all the Tecumseh hate, but they are reliable if taken care of. I appreciate you watching. Cheers!
@philliphall5198
@philliphall5198 Год назад
Older is me and I’m slowly getting it done. Thank You’ll for information and advice
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Glad to help. Cheers!
@riceburner4747
@riceburner4747 3 месяца назад
Right there with u. I'm 71yrs old, getting harder, but as long as the Lord lets me, I'll keep chugging away. I still get under my car in my driveway. I move like molasses on a winter's day, but it's done & done right.👍✊️🖖
@andersforrad
@andersforrad Год назад
Nice one Stella - you rock! Cheers!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you Anders! I appreciate you watching.
@randi740
@randi740 Год назад
Great Job!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks for the visit. Cheers!
@jonlambshead5115
@jonlambshead5115 Год назад
Hi Stella I Really Enjoy Watching You At Work, You Are Very Thorough In What You Do. Unlike Some Mechanics. You Will Take The Time To Lubricate Things And Clean Things Properly. I Can't Stand Working On Dirty Equipment. I Will Always Clean Things Before And After Working On Mowers
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate you watching. Cheers!
@tinkeringtaylor3053
@tinkeringtaylor3053 Год назад
Great video Stella, sound perfect now well done👍
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks Nev! 😊 Cheers!
@barryewalt3250
@barryewalt3250 Год назад
Nice work Stella👍
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thank you! Cheers!
@HobbyMotorDK
@HobbyMotorDK Год назад
Super nice trick with the laser Stella 👍👍
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks 😁
@hollis3853
@hollis3853 6 месяцев назад
Well done presentation. Appreciate the tips.
@TheLawnmowerLady
@TheLawnmowerLady 6 месяцев назад
Glad it was helpful! I appreciate you watching. Cheers!
@waynestefinashen239
@waynestefinashen239 Год назад
Stella glad you put down the Guinness and decided to get back to work doing videos. Thought i was watching Bruce Pender for a while there when i saw that oil spill. Hope you enjoyed these comments and got a little laugh out of them but not enough pee your drawers eh? Will drop another comment when i watch the entire video.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Bwahahahahaha!
@waynestefinashen239
@waynestefinashen239 Год назад
@@TheLawnmowerLady Thought you would like that one!
@mike.4277
@mike.4277 Год назад
Great video 😎👍
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I appreciate you watching. Cheers!
@bbtg
@bbtg Месяц назад
Thank you 😊
@TheLawnmowerLady
@TheLawnmowerLady 29 дней назад
Cheers!
@TheNovaJohn
@TheNovaJohn Год назад
Nizeee Just got another nice one in yesterday on trade,,Needs a bunch, crank seal it bulging,, wheels shot,,adjuster very loose BUT its super clean,,,paint has like no scratches or ROT on the deck! Nice job,,,, I clean all my machines, the pull starters do get jammed up, these get cleaned as well when pressure washing, Oil or chain lube on most, also up into the spring area as well. NO oil on briggs, the plastic palls wont grab,, chain lube or chain wax combo. and these get wiped well after.. I do charge more for this but the machines that I do look like new.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I usually clean in a desperate attempt to keep the shop and my hands a tiny bit cleaner, 😂 I do squirt some WD-40 on those plastic Briggs pawls. Never seen a problem, I see so e of the same mowers year after year. Thanks for watching. Cheers!
@INSIDEHOUSEGARAGE
@INSIDEHOUSEGARAGE Год назад
very nice work!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks a lot! I appreciate you watching. Cheers!
@mc2whls
@mc2whls Год назад
Stella, thank you for doing a video about a Craftsman with a Tecumish Engine [Taryl Fixes All pro-noun-ce-ation]. Have a great week!
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks, you too!
@mikehrdlicka8635
@mikehrdlicka8635 Год назад
I got that same mower along curb last fall. Someone replaced carb with a foreign one. Cleaned it ran lean. A original bottom jet fit it. Lots better drilled upper one runs great
@TheLawnmowerLady
@TheLawnmowerLady Год назад
These older mowers are better machines than almost anything you can purchase new today. Thanks for watching.
@BADD400
@BADD400 Год назад
Good video
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks for the visit
@tonywampler217
@tonywampler217 10 месяцев назад
Very very good
@TheLawnmowerLady
@TheLawnmowerLady 10 месяцев назад
I appreciate you watching and supporting my channel.
@Pete.Ty1
@Pete.Ty1 Год назад
👍👍👍Thank you
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Thanks for watching. Cheers!
@andysaunders3708
@andysaunders3708 10 месяцев назад
Nice. Have always loved the Tecumseh engine, as it had an actual oil-pump, as opposed to the BS splash rotor, so you could use them on quite extreme slopes. They made them under license in Australia years ago as the "Kirby-Lauson, and also, the Spanish government "nationalised" the 2 stroke version, moved a few bolt-holes around so genuine parts wouldn't fit anymore, and renamed them "Aspera". They were still good.
@TheLawnmowerLady
@TheLawnmowerLady 10 месяцев назад
I appreciate the history insights. I have some old parts and literature that mentions Lauson. The Kirby connection was news to me. I guess they were trying to compete with Electrolux. Thanks for watching. Cheers!
@chrisssmallengines7163
@chrisssmallengines7163 Год назад
Nice mowers , I like them good mowers they love to have clean oil in the crank case . You have to make sure you dump junk into the gas tank , because the main jet pick up is so low in the float bowl . I use one for my personal mower .
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Yep. Those Tecumseh mowers, despite all the hate are good machines. Thanks for watching.
@mrodriguez5259
@mrodriguez5259 10 месяцев назад
Te felicito 😊
@TheLawnmowerLady
@TheLawnmowerLady 10 месяцев назад
Te agradezco que veas mi video. ¡Salud!
@grasscutterpalmer3746
@grasscutterpalmer3746 Год назад
good fix Stella he was lucky he did not bend the crank and could of been a costly repair
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I know, right? Thanks for watching. Cheers!
@michaelreynolds1892
@michaelreynolds1892 Год назад
Had one do the same blade a little loose, sounded real bad, tightened and ok.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I'd suspect many a lawnmower went to the dump for nothing more than a loose blade!
@LJSJIUJITSU
@LJSJIUJITSU Год назад
The more I learn about lawnmowers the more I realize the products of the past were just more durable and simple to work on. In terms of durability what is your opinion on the Tecumseh vs Briggs and Stratton motor?
@Rein_Ciarfella
@Rein_Ciarfella Год назад
Not just lawnmowers! Just about anything you care to mention with few exceptions.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I think this later model Tecumseh is right up there with the flathead Briggs, often referred to as the Quantum engine. Even the older 3.5 Tecumseh engines, I think is just a bullet-proof as the older 3.5 Briggs pulsa prime engines. I think the Tecumseh engines get such a bad rap across the pond is they were made in Italy. Not unlike licensed manufacturers of antique Vespa and Lambretta scooters in the 60's, made in Asia, South America, and other parts of Europe. Just enough difference to make them not as desirable as the originals. I really appreciate you watching. Cheers!
@jimyeske8498
@jimyeske8498 Год назад
I’ve heard that noise before. I was thinking, take the blade off, reseat and tighten. Glad it worked out.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I probably should have, but it seemed awfully secure on first impression. Besides, it would have been a far less interesting video... Cheers!
@riceburner4747
@riceburner4747 3 месяца назад
I wished u gave us a little history on how u got into working on small engines. Self-taught? Or schooling? Your dad? U are very knowledgeable, impressive. Already sub'd & gave u a 👍
@TheLawnmowerLady
@TheLawnmowerLady 3 месяца назад
Thank you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HAbYv_zSEZ4.html is a little channel trailer that explains a lot. I think I got my chops from my Grandpa. I didn't want that little video to drag on too long, so I cut out some bits: I'm into antique motor scooters, and my neighbors asked for my help with their small engine stuff, and one thing led to another... I appreciate you watching. Cheers!
@waynestefinashen239
@waynestefinashen239 Год назад
Good video Stella the Techumseh engines are pretty tough the only think i do not like is how the primer bulb stiffens up but it still works.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Surprisingly, this one even with its advanced age, still worked. Some versions were black rubber, shaped more like the Briggs 9nes. Never figured if they were interchangeable. Cheers!
@waynestefinashen239
@waynestefinashen239 Год назад
@@TheLawnmowerLady Interesting thought never tried to swap one out ie: black for red may look through my spare scrap parts carbs and take a look at that.
@haneyoakie14
@haneyoakie14 Год назад
I love the Tecumseh TVS engines. As you mentioned, they were better made than the 2023 engines are. Obviously, that one is at least 15 years old, Tecumseh went belly up in 2008, and that one actually looks like a late 1990’s model to me, maybe 1998, so 25 years old. If cared for, that has 25 more years in it.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I usually take a pic , or write down the model/serial info. I failed to do both on this one. Oops!
@haneyoakie14
@haneyoakie14 Год назад
@@TheLawnmowerLady I decided it is a 2004.
@JungleBobRepair
@JungleBobRepair Год назад
Good job Stella,you the man,oh I mean the Woman!😂
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Haha! Thanks JB. Cheers!
@robertmailhos8159
@robertmailhos8159 Год назад
It definitely has a sheared key either the top or bottom one
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I'm pretty sure that one time it yanked out of my hand was an anomaly. Never happened again. If it comes back, I'll replace the key at no charger. Cheers!
@berardia4
@berardia4 Год назад
Briggs engines can run ok with a partly sheared keyway but even a hair off on the Tecumseh you'll get a kickback. That one may be very slightly off.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I thought it might be, but it only yanked out of my hand once. Thanks for watching.
@Rein_Ciarfella
@Rein_Ciarfella Год назад
Stella, I’m looking for a specialized source for seals. I came across a reference to one a while back but can’t find it now. This source would have low minimum orders, good pricing and normally sell to small engine shops. I want to order by seal dimensions rather than OEM part numbers. This would be for things like small 2T (string trimmers) up to 4T (lawn tractors). Any help?
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I used to google the dimensional numbers, and got good hits for suppliers. That said, I never felt the need to stock much more than common spark plugs and air cleaners. I usually just ordered them one at at time. Yes, I paid more, but I pass that cost onto the client. I appreciate you watching. Cheers!
@carlcannedy2669
@carlcannedy2669 3 месяца назад
Nice video you made. How ever do you sell tecumseh carburetors are parts? Thanks Carl
@TheLawnmowerLady
@TheLawnmowerLady 3 месяца назад
Thanks! I don't sell parts as such, only those needed to complete a repair. I'm merely a hobbyist, working in my backyard. I appreciate you watching. Cheers!
@dougsorensen7594
@dougsorensen7594 Год назад
I've learned so much from you. Question - I have a silver and black craftsman 20in with the 3.5 Tucumseh engine. I maintain it well. Use only ethanol free gas and stay-lube. The engine runs fine up steep hills and down steep hills, but on steep sidehills it dies and then is hard to restart. I checked the carb, cleaned it etc. But it still stalls on steep sidehills. Do you have a suggestion that I don't know of? Thanks for considering my question.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
On those side hills, you are fighting gravity. The float in the carb bowl can't regulate the fuel flow on those side slopes. Depending on which side, once you get back to level ground, you are either drowning in fuel, or starving. I suggest mowing those slopes on a diagonal. Thanks for watching.
@dougsorensen7594
@dougsorensen7594 Год назад
@@TheLawnmowerLady Thank you for your thoughtful suggestion.
@xuchao9098
@xuchao9098 6 дней назад
remove the carb float ,and install a Fuel Shutoff from outside. manually shutoff the fuel when you stopped the engine .
@regrangihuna7319
@regrangihuna7319 Год назад
Mower starts and cuts out....when I hold primer button in, pressed in it runs good, I just replaced primer button...if its not seated and sealed, could this be my problem, it's the older Tecumseh
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Could be. That would allow more air in, and you holding the bulb in seals it tight.
@partsdave8943
@partsdave8943 Год назад
I’m surprised that you didn’t take the carburetor bowl off and inspect the contents at 14:38. Sure thought you were about to but you didn’t…..
@TheLawnmowerLady
@TheLawnmowerLady Год назад
No real reason to IMHO. Fuel was flowing freely, no debris in the catch bowl, the bowl nut/main jet was almost pristine. Probably not even necessary to probe the ports, just a demonstration on how to. I appreciate you watching.
@francislang5075
@francislang5075 Год назад
how many foot pounds would it be to torqe the blade?
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Pretty much 45 ft/lbs on push mowers. Riders are often 100+ Thanks for watching. Cheers!
@Ray_ray11
@Ray_ray11 Год назад
Hi Stella. Why don't you buy yourself a vacuum oil changer. It will save you a lot of mess.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I did, and was planning on an unboxing video. But in all honesty, I think my channel focus is better served to the average homeowner, and I don't suspect they would be too keen on seeing how to do jobs with a slew of specialized tools. I appreciate you watching, and commenting. Cheers!
@RedArmor24
@RedArmor24 Год назад
What years mower?
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Looks like 2004. 16:15 shows the engine DOM sticker. Thanks for watching.
@CarlosGonzalez-mr5qz
@CarlosGonzalez-mr5qz Год назад
Is a thicker heavy deck better? I think a lighter mower will be easier to maneuver.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I agree a lighter deck is easier, but also rusts out sooner.
@justincovington4401
@justincovington4401 Год назад
WD40 is a cleaner. Might as well be anyway. I use pb blaster or kroil. Good video tho. I've come across mowers where the blades are tight to the max and blades were still loose
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Maybe the bolts, or alignment pins on the adapter was worn? Thanks for watching. Cheers!
@RaysLaughsAndLyrics
@RaysLaughsAndLyrics Год назад
With a bit of help from Norm, The mower be now reborn. The Rays of Ruby Red light. Now proves shaft is alright. A keyway shift not the error, Not cause of vibrating terror. The pull start lubed and fine Starts on one pull each time? Air filter an' spark plug are due, Says the lady dressed in blue. Oil is drained from the crank. Some was spilled, let's be frank. Oil now added to proper depth; Starting Tecumseh is all that's left. Start Noise remains off camera. It's such a perplexing dilemma. Sometimes a simple screw loose Will surely, now, cook your goose. Tighten the bolt for mover blade, The vibration now did finally fade. Stella stayed the difficult course. And fixed the three an' half horse. Twenty-five years it did cut grass, Twenty-five years more it will last.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
You are awesome! Thank you!
@RaysLaughsAndLyrics
@RaysLaughsAndLyrics Год назад
@@TheLawnmowerLady You are too generous. This is the least I can do for the time and resources you invest in your subscribers. Best to you and yours Stella.
@bbtg
@bbtg Месяц назад
Craftsman 4.0 model 143.974008 Tecumseh carburetor. I need help ordering carb parts. And rebuild
@TheLawnmowerLady
@TheLawnmowerLady Месяц назад
Any major parts house will have good exploded diagrams to find your parts: partstree, jackssmallengines, repairclinic, etc. I prefer partstree as they show real time stock onhand on their website. You want to be looking up the engine model #, not the mower model # stamped on the deck.
@eliinthewolverinestate6729
@eliinthewolverinestate6729 Год назад
Te cum see Tecumseh. Which moved from Tecumseh, Mi to Saline, MI and is now Kohler.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
Huh? That's news to me. Thanks for watching. Cheers!
@brianking1138
@brianking1138 Год назад
They are good machines but I don't like the way the carb is mounted or that it has rubber o rings in it.
@TheLawnmowerLady
@TheLawnmowerLady Год назад
I agree about the O-rings, and the plastic emulsion tube almost always gets damaged. There's like 6 different ones, each a separate color. Thanks for watching.
@Jroo-tb7zw
@Jroo-tb7zw Год назад
Hello cutie. " well take a look under her skirt" I like you.
@buddylove4882
@buddylove4882 Год назад
Hi.Where can I buy the tool used to unclog those grimy carb jet holes?
@TheLawnmowerLady
@TheLawnmowerLady Год назад
These MIG welder tip cleaners I use all the time: amzn.to/3npp1tr Thanks for watching.
Далее
Neglected Honda Harmony HRS216: Complete Service
44:31
Proper Way To Tip A Lawn Mower Over
8:50
Просмотров 4,2 млн
(Part 2) Tecumseh Small Engine Total Rebuild
1:07:34
Просмотров 291 тыс.