Garmin VNAV/VCALC on GTN, G3X and 2-inch Navigators

Подписаться 5 тыс.

Просмотров 5 тыс.

50% 1

In this video Adam explains Garmin VNAV on the GTN vs the G3X as well as the V-CALC that is on the 2" Navigators.
0:00 Intro
0:12 VNAV Explained
1:31 GTN VNAV
2:28 G3X VNAV
3:00 V-CALC Mention
3:23 GTN VNAV Demo with Multiple Waypoints
7:43 G3X VNAV Demo Single Waypoint
11:36 Few More Things About VNAV
12:27 V-CALC Explained
13:46 Wrap Up

Наука

Опубликовано:

28 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@stevegibson4703 7 месяцев назад

Loving your videos. One video I would love to see is a minimalist IFR setup using a g3x and an autopilot. In other words, what is the cheapest setup using the g3x without bells and whistles that would be ifr compliant with an auto pilot, for someone who doesn't mind doing a few things manually. There's nothing like that on RU-vid that I can find and builders on a budget would find that useful. Maybe even a comments section, describing how this setup could be updated as funds become available, and what to prioritise first (based on your experience)

@robertomachado2465 3 месяца назад

Porque não postar um vídeo mostrando o passo a passo dos procedimento para configurar o Rnaves no G3X ?

@jimmiebeavers6240 7 месяцев назад

Another great video Adam, fantastic company!

@aladincarpetcleaning6416 7 месяцев назад

A lot of information, however could go a little slower for everyone to take in on technical setups. Great content!

@MidwestPanels 7 месяцев назад

Thanks for the feedback!

@tnflygirl 7 месяцев назад

I can’t get enough info about the G3x as I’m trying to decide to upgrade. Thanks for the videos!

@robertomachado2465 3 месяца назад

Gostaria de receber o passo a passo da configuração do RNAV do G3X.

@kevinphillips9408 7 месяцев назад

Thank you for this information

@chrishudson747 7 месяцев назад

Excellent. Thanks.

@CraigMaiman 7 месяцев назад

When using the GTN for VNAV, when setting an altitude target at a waypoint, is the VNAV Direct selection an essential step? I've usually just done Save at that step. Though, more than 50% of the time, the VNAV fails to properly engage, so I wonder if this is the reason. Awesome video, as always!

@MidwestPanels 7 месяцев назад

The VNAV Direct-To is technically intended for use on a later waypoint (think of it in the same way as if you got cleared to a certain waypoint in your flightplan that was 2 or 3 ahead of your current waypoint), but I found that if I just do it at the first waypoint with an altitude constraint, it allows for 100% reliability in picking up and tracking the vertical course - especially when you're starting off-course laterally.

@MidwestPanels 7 месяцев назад

One thing you can do is verify that a TOD point is shown on the G3X and/or GTN map page. If this is missing, then VNAV will not work, then you can do the VNAV direct-to in order to force it.

@CraigMaiman 7 месяцев назад

@@MidwestPanels There's always a TOD point displayed when I set a waypoint with an altitude constraint (and it even seems queued up in the AP), but it usually just flies right past it. The bug is set to the lower altitude, so I feel like I'm doing everything right, but no joy...