GoPro Labs | A Complete Beginners Guide

Подписаться 35 тыс.

Просмотров 8 тыс.

50% 1

GoPro Labs is a beta program that enables you to extend the capabilities of your GoPro action camera beyond its stock features. In this video I will show you how to download, install, and apply GoPro Labs features to your GoPro.
GoPro Labs home page: gopro.com/en/us/info/gopro-labs
Table of Contents:
0:00 - What is GoPro Labs?
1:07 - Downloading the firmware
2:16 - Installing the firmware
3:52 - Two options for creating QR codes
4:51 - Installing the QRControl App
5:20 - Options in the QRControl App
9:45 - 5 QR Codes I Use Most Often & How I Set Them Up
18:26 - How to Undo Some Codes
19:00 - How to Reset All QR Codes
19:50 - Which QR codes are your favorites?
_________________________________________________________________________________________________
Some of the following links are affiliate links. If you click on an affiliate link and make a purchase, I may receive a small commission. This does not result in any additional cost to you, and the affiliate commission I earn helps contribute toward the costs to keep this channel up and running. Thank you for your support!
MUSIC TRACKS FOR MY VIDEOS:
🎶 Track Club is a great source for high-quality music for RU-vid videos. I get all of my music from Track Club. Get a FREE, FULL-ACCESS 1 Month Trial of Track Club using my link: bit.ly/3t28y0I
CAMERA GEAR I USE:
- GoPro Hero 12 Black: amzn.to/48hHWc4
- GoPro Hero 11 Black: amzn.to/3SuQipa
- Sony a7S III Full-Frame Mirrorless Camera: amzn.to/41jTrw2
- DJI Osmo Action 4: amzn.to/3sYRusk
- Insta360 One RS 4K Edition: bit.ly/3HCo0UJ
- Insta360 X3: bit.ly/3e9Uhbd
- DJI Wireless Mic: amzn.to/3rqymmt
- Freewell ND filters. I get all of my ND filters from Freewell: amzn.to/3Zok7eo
- SanDisk 256GB Extreme MicroSDXC UHS-I Memory Card with Adapter: amzn.to/2Cu9dhc
- ANKER USB-C Charger I USE: amzn.to/3O6ce7u
MY FAVORITE GOPRO ACCESSORIES:
- Media Mod (Hero 9, 10, 11): amzn.to/3qaBjEx
- Dual Battery Charger + Battery (Hero 9 and 10): amzn.to/3jmy5c6
- Dual Battery Charger + Battery (Hero 5,6,7,8 Black): amzn.to/3jcpBV6
- Protective Housing (Hero 9 and 10): amzn.to/3jlCgoG
- Protective Housing (Hero 8 Black): amzn.to/3xgwwla
- Shorty Mini Extension Tripod: amzn.to/34EYPhe
- Suction Cup Mount: amzn.to/2WSOei7
- USB Pass-Through Door (Hero 9 and 10): amzn.to/3nn5fLN
- Anker External Power Bank: amzn.to/3s3ODKh
- Anker USB-C Wall Charger: amzn.to/37fCnN9
HIKING GEAR WE USE:
- Black Diamond Trail Ergo Cork Trek Poles: amzn.to/2OCkA9r
- Osprey Poco Plus Child Carrier: amzn.to/32vU8Gy
- Salomon Men's X Ultra Mid 3 Aero Hiking Shoes: amzn.to/2Ch9u7p
- Salomon Women's X Ultra Mid 3 Aero Hiking Shoes: amzn.to/3ji2iIK
Not looking for any of this sweet gear right now, but still want to support my channel? If you use this link to start your Amazon search it will benefit my channel with a small commission from some of your purchases on Amazon: amzn.to/2WAgbbt Thank you for your support!

Хобби

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@kevinkocher737 4 месяца назад

Thanks for the video :) I've been using labs for a few months now and I absolutely love it

@GreatDayForAHike 4 месяца назад

Absolutely. Yes, I do as well. Labs is such a powerful feature and really helps to get the very best out of the GoPro.

@benjamin11. 2 месяца назад

Amazing informative material ,thanks !

@GreatDayForAHike 2 месяца назад

You’re welcome!

@gilean6179 4 месяца назад

wonderful video. thank you for this.

@GreatDayForAHike 4 месяца назад

You’re welcome and I appreciate it.

@paulillsley 3 месяца назад

Thank you, great explanation!

@GreatDayForAHike 2 месяца назад

You’re welcome!

@nathanmontanez7227 2 месяца назад

Epic - going to try these!

@GreatDayForAHike 2 месяца назад

They really do unlock a lot of extra potential from the GoPro.

@xXxTDKxXx 2 месяца назад

SUPER HELPFUL! Thanks a lot

@GreatDayForAHike 2 месяца назад

You’re welcome!

@peteabdu9179 Месяц назад

The most helpful video I've found for this, thanks for making this! Only confusing part for me was understanding I don't need to scan the QR code under each tab in the app, the QR code reflects the settings in all the tabs with exception to the advanced ones.

@GreatDayForAHike Месяц назад

You’re welcome! Yes, that part is a bit confusing.

@richardruda267 Месяц назад

Great video. ISO and shutter speed invaluable.

@GreatDayForAHike Месяц назад

Thanks and agreed!

@RabiiHayani 4 месяца назад

Whaiting for it long time thx ❤❤

@GreatDayForAHike 4 месяца назад

You’re welcome!

@djstephennicholls 2 месяца назад

Great informative video thank you

@GreatDayForAHike 2 месяца назад

I’m glad you found it useful. Thanks.

@nemindakarunaratne2291 10 дней назад

Thanks Mate Very helpful.

@GreatDayForAHike 10 дней назад

You’re welcome.

@MarioLorenzo 4 месяца назад

I've been using GoPro Labs for only a short while, thanks to one of your previous videos. I use the Overlay/Burn-In lab to place a date and time stamp in the video, and the Large Chapter lab so the recordings are in fewer 12GB files which I find are simpler to manage and edit than the default 4GB files. I plan to test more of the other features after watching this video, especially the EXPS and FAST labs

@GreatDayForAHike 4 месяца назад

Those are both great QR codes as well. The overlay/burn-in is neat for specific use cases and I know a lot of GoPro users that love the Large Chapter feature.

@forced4ph 4 месяца назад

That qr when you put in the time (7:11) looks like a space invader 😂 Thanks for doing these videos. Always helpful.

@GreatDayForAHike 4 месяца назад

You’re right, it does 😂 Thank you, I appreciate it.

@dugsbugs1 2 месяца назад

Thanks for this.Even the forums gave the wrong info to disable a single preset. I only use my gopro 12 for streaming so I am playing with the rtmp and join presets so by rights, I will only need to scan the code without using the phone app. I also like the tusb so I can use a powerbank without the low power error and the clean hdmi is also great. Like you, I don't need camera settings. I do that with the camera however, being able to change ev comp while streaming is a bonus. Hopefully gopro will keep adding codes as we go along.

@GreatDayForAHike 2 месяца назад

Thank you for your feedback. Yes, I hope GoPro continues to innovate. The GoPro Labs is one of my favorite features GoPro offers.

@Mike_Oscar 19 дней назад

I have been testen this out a lot, and i noticed that when your color profile is on Natural it has quite some grain/noise but on Flat it looks way better.

@jaco_oosthuizen 4 месяца назад

Thank you.

@GreatDayForAHike 4 месяца назад

You’re welcome.

@trueview3127 3 месяца назад

Hey - great video. I use GoPro labs and never knew about the extras drop down menu. I am not sure how I missed that! Question for you - I use the custom exposure lock settings on the website. Is this available on the QR control Ap too or is it just the nine locations? Do I need to rescan the code every time the GoPro reboots or is there a way to keep the exposure lock location fixed where it was upon restart?

@theobviouschicken 4 месяца назад

I use TUSB to trust all power supply s when plugged in because sometimes you gotta use what you can get. I also tried GAIN with a negative 20db as that's what is needed on the motorbike but it is only gain not reduction unfortunately. thanks for the headsup on FAST , that's GOLD 😅

@GreatDayForAHike 4 месяца назад

Just checked out TUSB and yes, TUSB is definitely also a great one. I need to apply that one to my GoPro as well as I can’t always count on having my trusty Anker power bank. Thanks for your feedback!

@Bert_and_Sons 2 месяца назад

Thanks 👍 BTW You have a great English pronunciation. My old English teacher would say Royal English.

@GreatDayForAHike 2 месяца назад

I appreciate your feedback! Thank you.

@FOOTBALL_CPT Месяц назад

Hi there. This is super cool. I have an complex question. Please help. So I am currently filming football on a pitch that has flood lights. This is after sun set. The camera is set up on a pole in the corner. What would you advise would be best settings? I've got a GoPro Hero 12.

@xXadambXx Месяц назад

my favorite settings: NR01=1-25 , EXPX=100 (for Pal, 120for ntsc) (the lowest shutter speed with good working EIS, and no flickering). Pretty good is also WIDE (more control red color in grading for me) 😁

@GreatDayForAHike Месяц назад

Those are all great choices.

@johnloop 2 месяца назад

Hi, use my GoPro 11 without any gimbals and i want to film at 100fps in 4k linear mode with hypersmooth on. I usually control the exposure on spot by longpress and lock on the display. What value should I choose in EXPN? 😶what about EXPT? I am trying to shoot a Music Video for myself with my GoPro. So I am planning to use DaVinci Resolve after.

@martineudall 4 месяца назад

I have installed Fast on my gopro 10 but seems to have no effect on startup with both fast info and gopro labs info sticking on the screen for a few seconds Any suggestions.

@drpunithkumar 4 месяца назад

Does it void warranty or chances of bricking the GoPro?

@SSpin360 2 месяца назад

i want to set photo mode to capture at 1280*720 resolution in gopro 10 can we do this

@kenestra123 Месяц назад

Will this update allow me to use my GoPro 11 without the battery and just use a outboard 12volt battery such as my Noqua via a 12volt USB hub?

@jvanwees 2 месяца назад

I have installed GoPro Labs on my naked GoPro 12. However, when I show a QR code, the settings do not change on the front screen and in the Quik app, is this correct or is something going wrong?

@TunaSoda 4 месяца назад

I wish I could do this with my Alpha cameras!

@GreatDayForAHike 4 месяца назад

I know, right? I wish more camera manufacturers offered experimental firmware with advanced features.

@kennebagomuddler 2 месяца назад

Where is glossary for all of the various options??

@fantasybbplyr11 2 месяца назад

Thank you for this! I’m a VERY new GoPro user. I’m using it to livestream my kids baseball games through an app called GameChanger so family who live far away can stream in. Can one of these QR codes silence the onboard mics so there’s no sound streaming in to those watching?

@GreatDayForAHike 2 месяца назад

You’re welcome! Unfortunately, I don’t believe there is a QR code that makes this possible. There is code DAUD that disable audio in video captures but I believe this only applies to recording and not live-streaming. One potential work around for this would be to plug in a mic adapter to the GoPro but not connect any mic to it. I believe this would accomplish the end goal.

@gutembergrocha6078 2 месяца назад

I tried to download but the link on go pro labs doesn't respond, does it still work? I have a hero 10

@adamkrauss303 12 дней назад

Thanks for this. Just got a GP 12. Maybe I missed it, but once you have updated your GP with the Labs firmware, will it remain if you swap SD cards or re-format your card?

@GreatDayForAHike 11 дней назад

Great question and yes, it will remain.

@gregoh8087 Месяц назад

Hi, I just want to add a date time stamp on every video that I take, I tried and not working, would you please do one QRCode so I can scan or do a video to show how? Thanks.

@matthewwright4684 4 месяца назад

Thanks 🙏

@GreatDayForAHike 4 месяца назад

Absolutely

@Actioncamflix Месяц назад

At 08:30 does this feature unlock some sort of hidden GPS feature in GoPro 12? It's titled GPS enabled Camera Speed Triggers. Just wondering since I have a GP11.

@militaryarchive4840 Месяц назад

no, it doesn't.,works only for gopro 11, etc.

@RabiiHayani 4 месяца назад

The option in qr code app in extrats .... input how its work ?????

@GreatDayForAHike 4 месяца назад

The Input field for each is where you need to enter in the parameters you want for a specific QR code. The input options will be a bit different depending upon the QR code being configured. Some are a simple enable or disable and others have a range of parameters.

@ivlog3663 4 месяца назад

N ICE video!🎉 Do you know if there’s a QR code for NOT splitting files in appr. 4GB chunks anymore?? 😅

@GreatDayForAHike 4 месяца назад

Thank you. Yes, there sure is. 64BT should be the code you want for 12GB chapters.

@ivlog3663 4 месяца назад

@@GreatDayForAHike whaaaaaat for real?!?! Omg that saves my life ( not literally) I’ll keep you updated, should be done in couple weeks, you’re wonderful! Thanks so much for the video!!!! 😍😍😍😍😍

@0dan0 4 месяца назад

!M64BT=1 works for 64GB cards or larger, for cameras HERO8 and newer it will reproduce 12GB chapters. HERO11 and newer, it was extended to support any size chapter up to 64GB, !M64BT=64000

@GreatDayForAHike 4 месяца назад

@@0dan0 Thanks for this additional input and specifics!

@martineudall 4 месяца назад

Note the warning on larger chapters. Unfortunate that the warning cuts off at “but are compatible with” compatible with what.?

@jdzamora97 3 месяца назад

GoPro rookie user here. Will I be able to format my SD card once I already installed the Labs firmware in my SD card? I worry that the "UPDATE" folder would be deleted as well. What I usually do whenever I finish transferring my files to my computer is to format my SD card instead of simply deleting them. So a follow up question is, is formatting my SD card every time I want to delete my existing files good practice?

@GreatDayForAHike 3 месяца назад

Both great questions. Yes, as soon as you have installed the firmware it is okay to delete the UPDATE folder or format the card. The firmware does not need the folder to be present on the microSD card to work properly. Yes, I consider it a good practice to format your microSD card at least once a month. I, like you, almost always format my microSD card after I have copies all files from it to my computer. This helps ensure my microSD card has maximum storage available before my next adventure and also helps prevent corruption of the contents of the card.

@ravenshaw1514 3 месяца назад

how does the gopro handle conflictiing settings? LIke if you set somthing to perminant then on the gopro itself change a setting within a camera mode which one is now applied?

@GreatDayForAHike 3 месяца назад

Great question. The permanent QR code will still over ride the setting on the GoPro until the QR code is removed or the camera is reset.

@ravenshaw1514 3 месяца назад

@@GreatDayForAHike 🤙

@RabiiHayani 4 месяца назад

What about a bunch of qr codes If i went to select noise reduction + bitrate + wide gamut + log400 A diffrent qr code in the same time how they can all to gether be scanned in one scan ??.?

@GreatDayForAHike 4 месяца назад

Yes, you can do this. If you create several in the app but then wait to scan the QR code until you’ve input all of the codes you want you should then be able to scan them all at once via a single QR code.

@RabiiHayani 4 месяца назад

@@GreatDayForAHike thx for confirmation 😊😊👍👍

@GreatDayForAHike 4 месяца назад

@RabiiHayani You’re welcome.

@BITM2528 4 месяца назад

Hi, it's me again. Quick question. Is it possible to put permanent qr codes at the same time? I mean, like the iso display, at the same time, you'll have a fast boot feature, etc.?

@GreatDayForAHike 4 месяца назад

Yes it is. You can apply as many QR codes as you want to, technically. Of course some settings could conflict with other settings but as long as they are non-conflicting QR codes they should work.

@GreatDayForAHike 4 месяца назад

I typically run about 7 different codes at a time.

@BITM2528 4 месяца назад

@@GreatDayForAHike oh i see. if i put those qr extras on permanent and if i scan the QR presets that i made like the bitrate, iso min/max, shutter speed, etc does it affect or rewrite the permanent settings that i have put on? Sorry for this questions i really want to understand what's the dont's about this, i'm new to photography/film and gopro is my first camera.

@BITM2528 4 месяца назад

@@GreatDayForAHike thank you sir. ☺️ This is very helpful. U respond so quick. It's 12 midnight here but still watching ur vids. Ur awesome 🤙

@GreatDayForAHike 4 месяца назад

QR codes will not overwrite other QR codes already scanned unless you do a different variation of the same code you’ve already scanned. Example: You originally did BITR = 200 but then you decide to change that to BITR = 150. When you scan it, this will update the BITR setting to 150.

@martineudall 23 дня назад

I have bitr set at 150 does the higher rate impact on battery usage and reduced time?

@GreatDayForAHike 23 дня назад

Technically yes, but probably very minimal. Maybe a few less minutes per battery charge.

@martineudall 23 дня назад

@@GreatDayForAHike Thanks feel battery life is slightly less but benefits of gopro labs outweigh this plus always have 2 reserve batteries. Like others i find fast is not all that fast!! From leicestershire uk by the way

@GreatDayForAHike 23 дня назад

@martineudall Nice, greetings from the US.

@BITM2528 4 месяца назад

Is it fine to download the firmware and put it to sd card using android?

@GreatDayForAHike 4 месяца назад

Yes, this should be fine as long as you can copy the entire unzipped Update folder to the microSD card.

@BITM2528 4 месяца назад

@@GreatDayForAHike thank you. I've been trying a couple of minutes now, but sadly, it doesn't work 😔

@BITM2528 4 месяца назад

@@GreatDayForAHike there are other folders that showed up when i paste the UPDATE folder on the root directory of my sd card like "Alarms", "DCIM", etc. where you will not find when you open the sd card directory on desktop. I use zarchiver to extract the file.

@Vladstff Месяц назад

I followed the steps exactly how you said,but it still doesnt work

@GreatDayForAHike Месяц назад

Which part of the process doesn’t work for you?

@Vladstff Месяц назад

@@GreatDayForAHike Well im puting the sd with that program in my camera and it doesnt show me anything

@GreatDayForAHike Месяц назад

@Vladstff Oh, for the Labs firmware update. Make you copy the entire unzipped “UPDATE” folder to the microSD card. Then powering on your GoPro with this on the microSD card should trigger the GoPro to start installing the firmware.