GUIDE TO TRACTOR PALLET FORKS. WHAT SIZE PALLET FORKS? 🚜

Подписаться 211 тыс.

Просмотров 45 тыс.

50% 1

There are a lot of uses for pallet forks, which makes them one of the top sellers for us year after year. But before you just go and buy any old set, you need to consider a few things like: tractor size, tractor lift capacity, fork capacity, and fork length. We'll walk you through the factors you need to consider and give you recommendations for what we run on our tractors.
Products in video:
HLA Ultralight Forks: bit.ly/3LxkMlw
HLA Standard Duty Forks: bit.ly/38E2QYU
HLA 4200lb Forks: bit.ly/39F9EFE
HLA 5500 Forks: bit.ly/3lwHjV0
GWT Versabracket: bit.ly/3yOWMaF
GWT Hitch Hangers: bit.ly/3PtxcOx
5% OFF WITH CODE GWT ON HOSE END CHAMBER! www.hoseendchamer.com
We have a Tractor Pallet Fork Guide as well if you didn't catch everything in the video! www.goodworkstractors.com/blo...
Good Works Tractors is proudly sponsored by BORA Wheel Spacers! If you're looking for a quality solution to add stability to your machine, then BORA is the place to go! With solutions for tractors, ATV's, trucks and more, they're sure to have a solution to fit your needs. Plus, they're Made in the USA! www.motorsport-tech.com
Buy Hydraulic Kits! summit-hydraulics.com/?ref=go...
BUY One Large 7" x 12" Mirror! amzn.to/2Uit8ox
BUY One Large 7" x 12" Mirror w/Bracket! amzn.to/2yMGvpV
BUY Two Large 7" x 12" Mirrors w/Brackets! amzn.to/2wZCQUF
John Deere 1025r/New Style 2025r Seat Cover: amzn.to/2OyxBkY
BUY A GREEN BALLAST BOX HERE! www.anrdoezrs.net/links/90005...
Watch this video to convert your tractor lights to LED! • CHEAP LED LIGHT UPGRAD...
SHOP: www.goodworkstractors.com
AMAZON: www.amazon.com/shop/goodworkst...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win!
5% OFF WITH CODE GWT AT 247PARTS.COM www.247parts.com
5% OFF WITH CODE GWT AT ITC QUICK ATTACH! itcquickattach.com
5% OFF WITH CODE GWT AT JU FAB WORKS! www.jufabworks.com
5% OFF WITH CODE GWT AT 511 DESIGNS (CUSTOM GRILLS): www.5elevendesignz.com
5% OFF WITH CODE GWT AT TRACTOR PTO LINK! tractorptolink.com
5% OFF WITH CODE GWT AT YARD GLIDER! www.yardglider.com
5% OFF WITH CODE GWT AT MUDD'S CUSTOMS! www.muddscustoms.com
5% OFF WITH CODE GWT ON TRACTOR FLOORMATS! www.tractormat.com
10% OFF WITH CODE GWT AT OUTBACK WRAP! www.outbackwrap.com
5% OFF WITH CODE GWT ON HYDRAULIC SAFETY! www.hoseendchamer.com
5% OFF WITH CODE GWT ON SELECT PRODUCTS AT SUMMIT HYDRAULICS! www.summit-hydraulics.com
5% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us/store
5% OFF WITH CODE GWT ON PROTERO DUMP SYSTEMS! www.proteroinc.com
5% OFF WITH CODE GWT ON SWEEP-ALL SWEEPERS! www.sweep-all.com
5% OFF WITH CODE GWT AT MILLER TIRE! www.millertire.com
5% OFF WITH CODE GWT AT BIG TOOL RACK! http:www.bigtoolrack.com
5% OFF WITH CODE GWT AT HEAVY HITCH! www.heavyhitch.com
5% OFF WITH CODE GWT AT KBC TOOLS! www.kbctools.com
5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.
#PALLETFORKS #TRACTORS #JOHNDEERE

Опубликовано:

20 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@dalcassian56 2 года назад

I love how you don't try to hide the mistakes, it's one of the reasons I enjoy watching (and learning!) I can relate sooo well to those moments🙄. Keep up the great work!

@GoodWorksTractors 2 года назад

I'd like to think I don't repeat so many of them anymore, haha! It's been quite a few years since I whacked something with the ROPS...I guess I was due!

@dalcassian56 2 года назад

@@GoodWorksTractors there are days when it feels like life is a blooper reel, but you gotta keep on tractorin'!👍

@d.a.ballou9740 2 года назад

Sorry you had one of "those" days, but I must admit, it's nice to know it doesn't just happen to me! 😁👨‍🚒

@gregbakke8296 2 года назад

Excellent info as usual! I just bought 42" forks for my 3E series JD, I love em. So many uses. Keep the great videos coming 🙂

@montidell7227 2 года назад

When it comes to loaders, i love our MX loader attacher on our kubota. You pull out a spring loaded double pin, and then take off the forks/bucket, and then when you put on something else, the pins automatically snap back in, so you can put on the bucket or forks without ever leaving the seat. It’s amazing! We’ve also had an old deere (my profile pic) which had a similar system on the loader, and then we also have a EURO 8 bracket on our new holland, its a good system we have over here in England.

@MarkJohnson-pm6cx 2 года назад

I have found that if you tilt the forks down towards the ground you can slide them very easily, the weight transfer of them is a lot less.... give it a try!

@GoodWorksTractors 2 года назад

Nice, will do!!

@SteveMac. 2 года назад

Agreed!

@dfarmer_ 2 года назад

Yes, that makes it easier. I want to get second set that is used for all non-pallet work so I don't have to move them.

@dalevonthun5257 2 года назад

Thanks again for a great presentation.

@Noah_E 2 года назад

We drilled holes in the ends of the forks for our New Holland. They are great for attaching D rings and chains to and if we need to move a trailer you just attach a ball like you would any ball mount. We use off the shelf 1-7/8 and 2 balls and had a local machine shop cut the shank down on a 2-5/16 so all three can be mounted to either the forks or drawbar using the same nuts and the smaller wrench vs the large one you need to tighten or loosen a standard 2-5/16 ball. After nearly a decade of use it doesn't appear to have done any harm to the forks.

@jimmcknight3021 2 года назад

A couple of more uses. I think I saw our Canadian friend, Gord, move his picnic table around. One thing that I picked up is a accessory that can be put on forks when you have the forks together and pull trailers around. Up to 6500 pounds. When your trailer challenged like me, its good to have plan B. 😆 lol

@timsawyer7443 2 года назад

I have a set of 48" HLAs for my JD 3038E that I bought from... uh... oh yeah -- Good Works Tractors!!! I've often been glad I had the extra length, but a shorter set and those extensions MIGHT have worked fine for those times. I still probably have my bucket on most of the time, but I have been surprised at how often the forks stay on, and how many uses I've found for them. Definitely a sound and wise purchase on my part -- both the product and the vendor!

@danielmacdonald16 2 года назад

Just learned of some who broke his back when a hay bale he was lifting rolled back off his loader across his hood and plowed into him while seated. I just bought a set of forks with an extended "headache rack". I think the increased lift capacity of the ultra light forks is not worth the risk. Buy a frame with extended height or weld one on. A higher rail also helps protect your tractors grill when using forks as a poor man's grapple to move brush. Thanks for a great channel!

@urdad1984 2 года назад

Perfect timing! My B2301 is going into the dealer next week for loader install & pallet forks! Just going Land Pride 2k lb forks

@GoodWorksTractors 2 года назад

Awesome, enjoy!

@GoodWorksTractors 2 года назад

Hope you enjoyed the video! Want to see where you can buy these forks? Click the links below! We ship right to you all around the country! HLA Ultralight Forks: bit.ly/3LxkMlw HLA Standard Duty Forks: bit.ly/38E2QYU HLA 4200lb Forks: bit.ly/39F9EFE HLA 5500 Forks: bit.ly/3lwHjV0 GWT Versabracket: bit.ly/3yOWMaF GWT Hitch Hangers: bit.ly/3PtxcOx 5% OFF WITH CODE GWT ON HOSE END CHAMBER! www.hoseendchamer.com We have a Tractor Pallet Fork Guide as well if you didn't catch everything in the video! www.goodworkstractors.com/blog/general/a-guide-to-pallet-forks-for-tractors/ WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! 5% OFF WITH CODE GWT AT 247PARTS.COM www.247parts.com 5% OFF WITH CODE GWT AT ITC QUICK ATTACH! itcquickattach.com 5% OFF WITH CODE GWT AT JU FAB WORKS! www.jufabworks.com 5% OFF WITH CODE GWT AT 511 DESIGNS (CUSTOM GRILLS): www.5elevendesignz.com 5% OFF WITH CODE GWT AT TRACTOR PTO LINK! tractorptolink.com 5% OFF WITH CODE GWT AT YARD GLIDER! www.yardglider.com 5% OFF WITH CODE GWT AT MUDD'S CUSTOMS! www.muddscustoms.com 5% OFF WITH CODE GWT ON TRACTOR FLOORMATS! www.tractormat.com 10% OFF WITH CODE GWT AT OUTBACK WRAP! www.outbackwrap.com 5% OFF WITH CODE GWT ON HYDRAULIC SAFETY! www.hoseendchamer.com 5% OFF WITH CODE GWT ON SELECT PRODUCTS AT SUMMIT HYDRAULICS! www.summit-hydraulics.com 5% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us/store 5% OFF WITH CODE GWT ON PROTERO DUMP SYSTEMS! www.proteroinc.com 5% OFF WITH CODE GWT ON SWEEP-ALL SWEEPERS! www.sweep-all.com 5% OFF WITH CODE GWT AT MILLER TIRE! www.millertire.com 5% OFF WITH CODE GWT AT BIG TOOL RACK! http:www.bigtoolrack.com 5% OFF WITH CODE GWT AT HEAVY HITCH! www.heavyhitch.com 5% OFF WITH CODE GWT AT KBC TOOLS! www.kbctools.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

@Classifiedreality 2 года назад

Thank you sir....always informative....and entertaining....👨‍🌾🚜🚜👨‍🌾👍👍

@GoodWorksTractors 2 года назад

Haha, thank you!!! Have a great weekend :)

@keithrayeski3147 2 года назад

Great video! Hey, Bora wheel spacers…there’s a video topic I could learn a lot from!!😁

@mrmichaeltscott 2 года назад

My contribution. For my little 26hp I ordered overbuilt 4k lb cap BEEFY SS forks to grow into or have better resale. (Has removeable center backstop) plus I use them as Grapple even though I have a grapple forks do better at some stuff. And one fork makes a good bail lift at 48 inches. I also choose 48 inch because sitting in the seat that's what I need to see the end of the forks. 36 is too short. Of course got to be adjustable. 100% all my implements are on pallets now and I go get what I need with the forks. This video is 100% right on info. What else can we ask for? You even mentioned Kioti. 🤣🤣🤣🤣

@combinedlegacy 2 года назад

Forks are useful for everything.

@GoodWorksTractors 2 года назад

haha, agreed!

@SteveMac. 2 года назад

I bought 48” forks for my 1026. Not for more weight capacity, but for length. I’m often carrying large footprint, lightweight loads and I wouldn’t be without them. If you carry only one length, I’d recommend the 42. The longer forks look a little goofy on the subcompact, but work well if you stay within weight capacities.

@tonygreen1067 2 года назад

Love my pallet forks.😍

@danielmoore6507 2 года назад

Pallet forks are the first thing I got when I bought my 1025r. Got 42" tines on mine.

@redneckmini14 2 года назад

Love my Bobcat forks.

@dfarmer_ 2 года назад

We put 4 tines on to clean up bed pack (cattle manure) and a single tine to trench!

@ragcell 2 года назад

There is a way to make the pallet fork attachment more useful: have 3-point adapters welded on / built into the pallet fork attachment frame - a couple manufacturers offer this option. Hauling stuff on the back of the tractor is really handy for hauling cinder blocks on a pallet or backing up to a big rock, object or whatever where one’s vision of what is going on, i.e., exactly where are the tines, is safer and easier: no more standing up while on the tractor or using other contortions to see where the tines are being placed in the front of a tractor. Bottom line is no good reason for the quick-attach pallet fork frame to a front-only means to attach pallet forks to a tractor. Keeping heavy loads closer to the ground, behind, the tractor, is a better option instead of lifting large (and heavy) objects high enough to see where one is driving.

@jaysss6842 2 года назад

A couple thoughts / tips on those hydraulic forks: When you uncouple the two hoses you have a male and a female quick coupling at the end of each hose. Try to couple them together when not in use. Keeps your coupler faces cleaner and equalizes the pressure on both side of the cylinders. Also on the skid steer / compact track loader, that is a “connect under pressure” manifold. Grab a wooden block, scrap piece of 2x4 etc and push hard on both male and female couplers on the machine. They will move in a quarter inch or so and vent any hydraulic pressure into the center case drain line. That should make life a little easier.

@jaysss6842 2 года назад

I meant to say: use the block of wood on the couplers rather than your hand. I am paranoid about hydraulic oil injection injuries so if you put the block o’ wood on the coupler and push on the block you should be safe.

@macdawg6403 2 года назад

Love my pallet forks

@stevo4535 2 года назад

I fly FPV drones and get stuck all the time. Try taking a bow and secure the heaviest fishing line to an arrow to lob it just over where the drone is stuck so you can shake it down. It looks like it is really high up there otherwise a rock on a para cord works or multiple extension poles to get close enough to poke it.

@Harry-zz2oh 2 года назад

Getting stuck up a tree must be just as bad as being up a crick without a paddle.

@MattN03 2 года назад

Hate to see the trailer damage as i can relate. I had just had new garage doors and aluminum trim placed on our house. We didn't have the shop built yet, so I was keeping the tractor in the garage with 7' doors. I ran the ROPS into the brand new door trim. I wanted to cry :( My shop has 11' tall doors so no worries even with the tractor on the trailer :)

@earlyriser8998 2 года назад

Love my 48" forks on a large Kubota. Use them to move stuff all the time.And have used them like a stump bucket to remove a few buried items.

@GoodWorksTractors 2 года назад

Handy as can be!

@urbanstd1 2 года назад

I wish RU-vid allowed me to send pictures of my mangled SSQA plate after using 48" forks to move brush. Under load, attachments under a side load, can jump off the top rail of the SSQA plate and do considerable damage to the SSQA plate. It was a $1400 mistake and it happens often according to my Kubota dealer. Better to trash the SSQA plate than bend the loader, I guess. I would not recommend Forks over a Grapple. A tip for the hydraulic skid steer forks, prior to disconnect make sure the forks are not at the full width position. Disconnect hydraulic lines and connect them together. Any hydraulic fluid expansion due to heat will be dissipated by the forks trying to move apart from each other. I have used this technique for several years and it works for me.

@GoodWorksTractors 2 года назад

Thanks for the tip about the hydraulics Tim! Oddly enough, I used to do that and somewhere along the way I totally forgot about doing so. Funny how that works! I've never heard of an attachment coming off the SSQA. Strange that your Kubota dealer has it happen all the time. How is a side load being applied to the attachment? That seems like a hard thing to do...or is it an uneven load, more on one side vs the other?

@BitCounter 2 года назад

2020 Year 3 sucks. Just like 1 and 2... It will take a group effort to get past it. You presented great information as always.

@GoodWorksTractors 2 года назад

Haha, yep, this too shall pass!

@Harry-zz2oh 2 года назад

From everything I've read lately, the economy for North America won't recover until 2024 unless we go into a recession. If a recession shows up, it might be late 2026 or later to recover. The recovery from 2008 didn't really show up until 2015.

@Ron-ds2ob 2 года назад

I have the bucket slip on forks right now, that I use on my BX. They waste a lot of capacity as they stick out about 24" from the arms. I just bought a set of 42" forks at an auction and a quick attach backing plate from Amazon, and with a little bit of bar stock, I will have a set for less than half of what these things cost now a days. They don't need to be super strong, as the tractor it limited to about 1000 pounds lifting at best. Ya got to save money wherever you can these days.

@GoodWorksTractors 2 года назад

Nice find Ron!

@brianhillis3701 2 года назад

If possible try the forks lengths on your tractor or a dealers similar model. Get forks long enough to easily see the tips. Makes using them much easier. Or get the extenders if you want. You don't want to spend a long time getting the forks where you want them and certainly don't want to damage what you are picking up.

@GoodWorksTractors 2 года назад

Good point, extra length can help with visibility!

@randyhill4549 2 года назад

Brian, Courtney did a video where he painted the tips of his pallet forks. I do this too now. High viz yellow for mine. Really helps w/ visibility.

@gregritter377 2 года назад

Bolt On Hooks has a tool for releasing the pop it on the mail and of your hydraulics it’s about 70 bucks by the time you get it to the door

@javabean215 2 года назад

A problem with a ball hitch on the 3-point....gravity is your only downforce. If your trailer and tractor go over a bump, the trailer can lift the ball and 3-point, which can then slam down pretty hard. If this is hard enough, it can upset your control; and if it's often enough it can cause equipment damage. Best bet is to use a tow bar on the back. On the other hand, a ball hitch on the FEL has hydraulic force to keep it at the set height, so you don't have to worry about that sort of shock load.

@acmelvin6360 2 года назад

Good information! Hey, when are you going to review and compare Yanmar tractors? They seem like good tractors especially since John Deere uses their engines.

@charleslynch908 2 года назад

Irwin makes a clamp to help the hoses attach and is really cheap

@merrilljohn1619 2 года назад

This is off topic, but you know tractor attachments better than anyone. Can you tell me anything about a water well drilling rig for the pto ? I saw a listing for a BoreMaster 3 point hydraulic drill for $7k. I'd love to know if you have an opinion. Thanks for your channel.

@dalevonthun5257 2 года назад

I have 36 in forks for my 1025. I think they are the Swiss army knife of attachments.

@rmurphy3435 2 года назад

Would love one of these workhorses but unfortunately just can’t afford to buy or feed one.

@oakironwork4331 Год назад

The work load limits are actually 1/4 of what they actually yield at so if it’s rated for 1,000 lbs it’ll actually take 4,000 lbs of force to make them bend or break

@simpleman4196 2 года назад

Best thing I have ever used was 6' forks they are so nice to have. That was on a skid steer. I personally have 42" forks and don't like them I wish I had longer ones.

@simd510 2 месяца назад

why do you like longer better?

@simpleman4196 2 месяца назад

@@simd510 easier to see plus you can carry more. Say you want to carry logs if your forks are longer you can carry more as long as you can handle the weight. Say you want to pick up a piece of plywood long ways you can't do it with shorter forks but if you have longer forks you can. Lately I have been using 8' forks on a machine that can pick 12,000lbs they are great. I can pick up two pallets at once or four if they are stacked

@ChrisCraftWow 2 года назад

So I have a TC33 with around 2000 hrs on it (bought with 1600hrs in 15) I've always been disappointed that it doesn't have a quick attach bucket and I would like a backhoe for it. Do you think it's smarter to go for that stuff after market or should I just trade in for what I want? Looking for thoughts?

@michaelwilson9764 2 года назад

Call your local arborist (tree lopper). He can climb almost to the top of even a skinny tree safely and quickly to recover any weird thing from a tree. I have even recovered a parachutist from a tree.

@jamesyates5191 2 года назад

I can’t imagine having a tractor without forks. Though I don’t recommend it people put a man cage on them to work at heights. It takes a very steady hand at the controls.

@LukesJohnDeereGarage 2 года назад

I wish there was a way to convert my 45 loader to quick attach so I could use pallet forks instead of bucket forks. There's a lot of wasted capacity there- especially with the heavy logs I move.

@bj.roberts6410 2 года назад

Sorta New Guy...here...I have a 1025R...I have the HLA pallet forks. They work fantastic moving trees. fluffing up brush piles to shed. Lifting,holding a board for temporary work table. I use them the most. I wish there was an attachment to clamp stuff your moving around, ether electric or third function

@jimmcknight3021 2 года назад

There is a clamp from Precision mfg and Courtney is a dealer for them. It's called the Add a Grapple. You can put an optional clamp on the Grapple to steady your load.

@bj.roberts6410 2 года назад

@@jimmcknight3021 hi 👋 thanks for the information I’ll check them out. The only issue is shipping to Canada 🇨🇦 I’m right next door to Michigan such a pain this shipping and to the wallet (ouch)

@justinwhitworth1887 2 года назад

All ways had good luck with some silicone spray to make them slide easier. Less messy then slapping grease on it

@GoodWorksTractors 2 года назад

Good idea!

@spudgamer6049 2 года назад

But do they make them for the 3pt hitch? I don't have a FEL.. lol

@spudgamer6049 2 года назад

On the subject of safety and that list of uses, be very careful when using the forks to hang something you're working on. Don't get under the load unless it is supported by more than the loader, as you don't want to be under the load if the hydraulics fail.

@Rumblestrip 2 года назад

Kinda surprised you dont carry them for 3 point attach as well honestly. Not everybody has a loader. 🙂

@rickkatz4692 2 года назад

See how your necking around the front. It would be nice to have a camera set up for the front and back with an app for the cell phone.

@GoodWorksTractors 2 года назад

Yeah, have considered it, but I'm tall enough where I can see if I stretch far enough, haha!

@jackbaskin371 Год назад

Liked the video but am wondering why, if the fluid had warmed up and expanded, just push the center of the connector against something solid, that will open the valve just enough to release the pressure and you can connect them.

@GoodWorksTractors Год назад

Believe me, I tried.

@dalevonthun5257 2 года назад

Sorry about all the unfortunate mishaps Brother. We can learn from this also right? Days like this I need to remind myself that, " smooth seas do not make good sailors".

@markschmaus5580 2 года назад

Good Morning!

@GoodWorksTractors 2 года назад

Good Morning Mark!

@markschmaus5580 2 года назад

@@GoodWorksTractors crazy weather

@GoodWorksTractors 2 года назад

Yeah, really is all over the map! See that tornado in Gaylord? Rare!

@whitebirchacres 2 года назад

Any tips from people on how to see the forks better when trying to grab something like a pallet? My visibility is pretty bad for the end of the tines in my L250!

@DrgnRebrn 2 года назад

Paint the tips blaze orange

@Harry-zz2oh 2 года назад

Install a small camera on the bucket so you can see the end of the forks. If your display unit is mounted to the dash area just in front of the steering wheel, it should work okay. (If you don't have a camera yet, this will give you a reason to buy one. GoPro is one brand which can be used for a lot of different things.

@kdegraa 2 года назад

The loader on my tractor is rated to lift 854 kg. So I guess getting forks rated to lift around 1000 kg should be fine.

@GuillotineStare 2 года назад

moving boulders

@schroed 2 года назад

A video just to sell hose end chambers.

@rodbagley1686 2 года назад

Most pallets are 40 by 48. Not all pallets are created equal. If you don't support the full length of the pallet quit often the pallet will break just past the end of the forks. Don't ask me how I know!

@GoodWorksTractors 2 года назад

Agreed, we buy hundreds of pallets every month. It’s amazing the difference an operator can make too! 😂

@lesreed8803 4 месяца назад

I would bet there is a good old boy that will bring that bucket truck from the fire department down and if they will rescue a old elderly ladies cat I know they will get you are a real great business man I could tell it the way you talk your comfortable oh man you're comfortable you're Hired Man

@KaylorTruckingLLC 2 года назад

Someone needs to make forks that attach individually to the SSQA, no back frame or whatever. The assembly where the locking levers are would serve as a back, but then you would have more lifting capacity with no frame, know what I mean? What do you think about that idea Courtney? I think they'd sell!

@brianhillis3701 2 года назад

The back frame is practically the majority of the value. It allows you to secure items to the forks. A drum won't stay on unless it is level and doesn't bounce much. Same with logs. Unless you are always on flat ground or have extremely quick reflexes and hydraulics it is easy for some load to be lost. Without the back, curling it back to keep it on may result in a load on the hood or your lap. I went the other way and got a taller heavy duty frame that I can rely on to help secure the load.

@GoodWorksTractors 2 года назад

Hmm, might be onto something there!

@GoodWorksTractors 2 года назад

Yeah, would really be meant for light duty and small capacity loaders I think...

@KaylorTruckingLLC 2 года назад

@@brianhillis3701 see I feel like you could secure the load directly to the loader frame at the front and achieve almost the same result, but with a real tall load I can see what you're saying. It would be subjective to only certain applications of course, and hopefully come with some warnings but I see what you're saying for sure. They would be perfect for me, I just need to move a few smaller things around the house

@KaylorTruckingLLC 2 года назад

@@GoodWorksTractors exactly. Would really help a lot with the sub compacts. I just have a BX2380 myself, not a whole lot of lifting capacity, but also I feel like the cost of what I'm suggesting would be significantly less than one with a full back setup since it's a lot less material to build

@lamontpowell6235 2 года назад

Unfortunately I have a pin on bucket. I use clamp on forks, but they are not as good. Too much $$ for me to change over to quick attach.

@Harry-zz2oh 2 года назад

LaMont, I have the same problem. My neighbor had two forklifts so he would always come over and help. I have needed the forks a few times but not so much now. Just like my tractor, I don't have much of a use at the moment. I need to think of some uses or I'll just try to sell it.

@chrishunt5291 2 года назад

I have the 30 in clamp on with the stabilizer bar attached. And a 2ft headache rack that keeps the forks together. It can lift what I need. And I can take them off and on in seconds. It makes me use them more. I have the quick attach system too.

@randyanderson9077 2 года назад

And it’s not even Monday!

@daveb5540 2 года назад

That's why I like chinese tractors, no break in fit period, everything is nice and loose right from the factory...ha ha ha :)

@marcbuxton 2 года назад

This homemade solution from Tractor Mike may solve this pressure problem also (I think?): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4u9XRsW9T28.html