Тёмный

Harley Touring M8 Rekluse Auto Clutch Install and Review - Game Changer 

RealRonTV
Подписаться 11 тыс.
Просмотров 10 тыс.
50% 1

If you haven't heard about the Rekluse Auto Clutch, you don't know what you're missing! Easy install and one of the best upgrades out there for your Harley Davidson Touring M8.
As always... Any questions, just ask in the comments below!
Ride Safe!

Опубликовано:

 

7 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@southsoundrider5428
@southsoundrider5428 Год назад
Thanks for sharing. I'm a disabled veteran and I was recently diagnosed with arthritis in both of my hands. I could not ride my Road Glide for a few months because I cannot use my clutch in traffic anymore. I'm very motivated to install a Rekluse on my bike to help me with traffic!
@RealRonTV
@RealRonTV Год назад
Thank you for your service brother! This will be life changing for you! Highly recommended for your situation. Ride safe!
@mikeborscheid9842
@mikeborscheid9842 Год назад
I have had it for 3 years on my RG. I have hand tremors and this was a game changer for me. love it
@hoseclampehhh
@hoseclampehhh Год назад
Been contemplating this one myself. Did the AIM V3, don’t like it vibrates and increases lever pressure as rpm goes up. Running stock clutch with heavier HD SE springs, did 350 miles of traffic and highway on last week Sunday, clutch hand was killing me. Carpal surgeries helped but slow recovery on grip strength. Will look into this one. Side note, I ceramic coated the header pipe, and added DEI heat shield inserts, this 122 stg4 should be warmer than the previous 114 and 117 builds but it is not.
@Bill-ck3lo
@Bill-ck3lo Год назад
@hoseclampehhh That sucks on the AIM and still vibrating pressure. I had upgraded my 2019 Ultra M8 to a 122 ci kit and I have the reduced reach soft brake clutch with a rekluse slave cylinder, and I love the smoothness and light lever pull. I am also contemplating this clutch, but we shall see.
@easyglider1307
@easyglider1307 Год назад
Good to see you again Ron. The bike sounds mean after that cam swap. Keep the videos coming.
@MerrittW
@MerrittW 9 месяцев назад
Hi Ron, had the ReKluse on my TC Ultra since 2016 I wouldn't be without it.
@RealRonTV
@RealRonTV 9 месяцев назад
I don’t know why more riders don’t do this? The best upgrade out there.
@davidchamberlin9273
@davidchamberlin9273 Год назад
Hey Ron, glad to see you back. The bike sounds fantastic!!! Have you ever gotten a chance to run numbers on that beast? Nice upgrade. I'm definitely going to look into that. Thanks for sharing with us. As always, much appreciated and ride safe.
@RealRonTV
@RealRonTV Год назад
Hey David! Glad to be back lol. I was able to get 116 HP and 138 Torque out of the upgrade.
@trikemike7291
@trikemike7291 Год назад
That is why I pay for the second one and if I get another bike that is the first thing that’s going on there man I am enjoying your videos. Keep them coming.
@RealRonTV
@RealRonTV Год назад
Thanks Mike!
@2147crew
@2147crew Год назад
Great clutch!!
@RealRonTV
@RealRonTV Год назад
You have it?
@2147crew
@2147crew Год назад
@@RealRonTV no sir. But o know it works
@rickswindell1964
@rickswindell1964 11 месяцев назад
If you install a bigger cam you will have to change the springs on the exp disc to white like I had to do!!
@BIGDOGPGHPA
@BIGDOGPGHPA Год назад
if its cold it should pull pretty good till it warms up
@michaelpowers4452
@michaelpowers4452 Год назад
I desperately need this mod I have to navigate a dangerous hill with a blind bend at the top, when leaving my home, I need to use the friction zone to keep a slower speed for safeties sake . would this help me maintain a slower speed on a steep hill? I might have to invest in this. Thanks Ron.
@RealRonTV
@RealRonTV Год назад
Mike put it this way… you let go of the clutch and it just idles. It won’t stall at all so you can go as slow as possible without having to worry about that.
@michaelpowers4452
@michaelpowers4452 Год назад
Had my dealer install my Rekluse and it is amazing , glad I made the move. Also got Ohlin SE shocks installed , they are a must have also. thanks for your help.
@RealRonTV
@RealRonTV Год назад
@@michaelpowers4452 I’m surprised your dealer installed it. What did that set you back?
@michaelpowers4452
@michaelpowers4452 Год назад
I am in at about 4K for shocks,clutch and a fan cooled oil cooler. I have a steel blue 22 SG CVO.@@RealRonTV
@RealRonTV
@RealRonTV Год назад
@@michaelpowers4452 keep going! 😆
@trikemike7291
@trikemike7291 Год назад
Every so often you have to rev the engine to 5000 RPM to adjust the clutch and I did none of that
@RealRonTV
@RealRonTV Год назад
Is that right? I didn’t even know that.
@trikemike7291
@trikemike7291 Год назад
But can I tell you not having to pull in the clutch when I’m in traffic I can just throttle and go I love it
@RealRonTV
@RealRonTV Год назад
I’m spoiled now. No way can I go back to a bike without this.
@trikemike7291
@trikemike7291 Год назад
This is my second recklus the first one I burned up
@RealRonTV
@RealRonTV Год назад
How did you manage that? :-)
@MilkMan608
@MilkMan608 5 месяцев назад
Happened to me too on a 2020 TriGlide. Only 1600 miles on it. Previous owner had it installed for his wife. I traded for it last October and a month later it was shot!
@mkingviehland
@mkingviehland 4 месяца назад
Hi. I had this a Rekluse Clutch installed on my H-D RG3 when I bought it. And it has failed twice now in about 1,000+ miles. I was told when I got it that I had to shift like I would normally, so have been. But wondering if maybe that was the problem. Yours seems to be working properly. I am so frustrated that I'm considering selling the bike altogether. Any recommendations on what may be wrong? Should I just let it shift completely on it's own and not use the clutch?
@RealRonTV
@RealRonTV 4 месяца назад
How did it fail?
@mkingviehland
@mkingviehland 4 месяца назад
@@RealRonTV, burned out. Twice. I initially thought it was installed improperly the first time, but let the H-D dealer install the replacement again since they offered to do it as no cost. Got on the phone with Rekluse afterwards and the free play gain was non-existent. They walked my husband and I through how to adjust it and we did. I thought I was all good. Followed their guide to the letter. Took it in for a 1,000 mile service (different dealer) and the new H-D dealer (where my husband got his bike from) said it was burned out again. They initially said it was installed improperly, but then backed away from it (probably trying to avoid getting in the middle of a potential suit). So now, Rekluse, to their credit, is replacing the clutch a second time at no cost but I have to pay the new dealer to install it and I am wondering if maybe I just suck at shifting?!?! LOL. No, but seriously, it is really frustrating and I am not sure what is happening.
@RealRonTV
@RealRonTV 4 месяца назад
@@mkingviehland if you don’t have enough free play it will burn out the clutch. Have you tried making adjustments and checking the free play every so often? How much torque is this bike pushing?
@mkingviehland
@mkingviehland 4 месяца назад
@@RealRonTV, yes, we check the free play gain monthly, though maybe we should be testing it weekly. I hate to admit I have no idea about the torque.
@RealRonTV
@RealRonTV 4 месяца назад
@@mkingviehland I’m having problems with mine right now and I’m close to abandoning it myself.
@richardrussell500
@richardrussell500 Год назад
I am confused... I will have to research how this works. No more clutch pull, just using the shift lever?
@RealRonTV
@RealRonTV Год назад
No the clutch still works the same way and you need it to shift gears. Just not first. While in first it will only move if you give it some throttle.
@richardrussell500
@richardrussell500 Год назад
@@RealRonTV got it... so, the idea is that you can sit at idle in 1st gear without pulling the clutch lever. that is nifty. definitely a game changer for people who have hand issues and ride in stop and go traffic. you may have mentioned it, and I may have missed it, how much did the kit cost? thanks : - )
@RealRonTV
@RealRonTV Год назад
@@richardrussell500 and you can do slow speed turns without having to be in the friction zone. The cost depends on your bike. Check their website for the price.
@richardrussell500
@richardrussell500 Год назад
@@RealRonTV thanks : - )
@richardrussell500
@richardrussell500 Год назад
@@RealRonTV do you know if your kit had the upgraded basket clips? apparently the original clips had a tendency to break. thanks : - )
@brucespencer7567
@brucespencer7567 Год назад
Hey how much was the kit?
@RealRonTV
@RealRonTV Год назад
The link is in the description. Definitely worth it if you ask me 😛
Далее
Rekluse Motorcycle Auto Clutch Lineup
9:37
Просмотров 138 тыс.
Harley M8 Softail (FXBB) needs a new clutch
26:33
Просмотров 1,9 тыс.
How to make any bike an AUTOMATIC
8:21
Просмотров 283 тыс.
Rekluse Slave Cylinder and Harley Clutch Service
20:31
APEX™ Harley Clutch Complete Breakdown
6:49