HDZero goggles definitive starters guide - flashing, battery cables, antennas, menus, and more!

Подписаться 10 тыс.

Просмотров 18 тыс.

50% 1

Did you just get a set of HDZero goggles in the mail? Maybe you just got your order in, but I am going to show how to get started anyway! We will be covering things like how to power them safely, picking antennas, flashing them, set up your HDZero VTX, and all of the menu options they have. There is a whole lot to cover, so be sure to use the timestamps below to get right to what you need.
00:00 Intro
02:28 Power safety
04:48 Dont use these cables
08:08 Check your polarity
11:11 Betaflight and ELRS
12:28 Antenna selection
16:35 Flashing the goggles
22:59 Flashing your VTX
28:51 Getting OSD and VTX control
35:40 ELRS backpack isn't here yet
37:02 Menus and options
43:02 Changing HDZero channels
43:38 Final thoughts
Get your firmware here
www.hd-zero.com/document
Want to pick up a set of your own?
bit.ly/3WV8SrE
Rolling in dough and want the TrueRC antennas?
bit.ly/3Wc2knB
Moving to Betaflight 4.4?
• HDZero will never be t...
Unlocking an HDZero Freestyle VTX?
• HDZero Freestyle VTX -...
#fpv #drone #guide
Want more FPV content like this? Buy me a coffee to keep it going! bit.ly/3OJ9Owp
This channel is not monetized, brand partnerships are unpaid, and no links are affiliated to keep all of the opinions as my own. Your support is the only thing that allows me to keep making genuine videos, so your help is very much appreciated.
Come hang out in The Bacon Corner on Discord...
bit.ly/3NNr7fn
or follow me on these things...
instagram: bit.ly/3WONvZG
TikTok: bit.ly/3tdtT3R
Patreon: bit.ly/3WQeq7p
or check out my merch!
bit.ly/3O8Uhpe
My Freestyle Toothpick:
BetaFPV HX115LR Frame
DarwinFPV ELRS 2.0 AIO
HDZero Whoop Lite VTX and Camera kit
Ummagrip Super Sticky Battery Pad
FPVCycle 13mm 1S Motors
Tattu 450mah 2s LiHV
Gemfan 3018 Bi-Blade Props
The 5" Freestyle Build for this Video
GEPRC Mark5 Pro Frame
iFlight Xing 2208 1800KV Motors
SpeedyBee F7 V3 Flight Controller
SpeedyBee 50A BLheli32 ESC
HDZero 1W Freestyle VTX
RunCam HDZero Micro V2 Camera
CNHL Speedy Pizza 1200mah LiPo
Ethix Rad Berry 5135 Props
My other gear:
Radiomaster TX16S
Radiomaster AG01 Gimbals
Thumb Grippies Pinch Sticks
DJI Goggles V2
iFlight Crystal DJI patch antenna
TrueRC Singularity omni antennas
Happymodel 2.4G ELRS Pro Module

Спорт

Опубликовано:

28 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 155

@lazydubdude Год назад

It’s criminal how few subscribers this channel has given the quality of content! Here’s to 2023 behind a year of exponential growth for you 👍 Great video really excited waiting for my own HDzeros now, /me heads off to read the manual 😬

@BaconNinjaFPV Год назад

Thank you!!! I would keep making this stuff even if nobody watched it, and I continue to be surprised at just how many people actually do enjoy it. If you took nothing else from this, I am glad that it was to read the manuals, lol!

@canigetachannel 10 месяцев назад

I agree, "lazy", and thank you "Bacon"!

@Halfrightfox Год назад

Underrated guide. You're really good at teaching using simple to understand language. It makes my purchasing decisions much easier, knowing guides like yours are out there

@BaconNinjaFPV Год назад

Thank you so much :) I am just happy it helped you out!

@dcdk1525 3 месяца назад

U are helping me getting my setup up & running. So the most heartfelt greets 2 U from Denmark mate

@StephFPV 5 месяцев назад

I honestly had no idea how to break into my newly-arrived HDZero goggles and stuff. Thanks to your video, it's made the process a lot easier.

@doncunningham3124 Год назад

Finally! After 3 months my new goggles have arrived! I've already reflashed all of my HDZero quads and everything works great! The new 90 camera works great too. Colors are a bit exaggerated but I really like the new experience. I feel like a kid on Christmas day!

@BaconNinjaFPV Год назад

I too had to turn the saturation down a bit, lol. The OLEDs they chose are pretty awesome though, and the 90hz camera is a great addition to their lineup. I can't wait to get a pair that I can keep so I can play with them again!

@MrJarrod Год назад

Thanks Bacon my HDZERO goggles were just shipped to Australia , your video was super helpful . I know now what to do.👍

@BaconNinjaFPV Год назад

I really hope you enjoy them!!!! Hopefully this summer I can get a set of my own and get back to doing fun things with them.

@MrJarrod 11 месяцев назад

@@BaconNinjaFPV Got my HDZERO goggles they are awesome . Well it's time to fly bye.

@MishMoves 11 месяцев назад

Just bought mine, shipping to Aus!! How long did it all take? :D

@newton.2.0. Год назад

I love watching stuff about things that i cant afford!

@BaconNinjaFPV Год назад

lol, me too! I was sad when I had to send these back :( now to wait until late summer when I can actually afford a set of my own.

@SteadfastRC 5 месяцев назад

I just ordered my HD zero goggles 2 days ago, super excited, all I've been flying is cheap box goggles for 4 years. When they get here I will be using this video as a setup guide for sure, very well done

@addisonfrancisco9007 10 месяцев назад

I just put an order in for these goggles and will be returning to this video soon! Thank you so much for putting this together 🙌

@BaconNinjaFPV 10 месяцев назад

Thank you so much for checking it out! I really hope you enjoy them as much as I did :)

@philthayer4087 Год назад

Whoa 15 amps… made me spill my coffee 😊

@BaconNinjaFPV Год назад

lolol, sometimes part of my charm is mixing up the words....I honestly didn't even notice :p But yeah, Watts, I meant Watts.

@RyanQuellet Год назад

Great video. Can summarize as: read the manual, and order a pizza without sauce, but bacon inside the bread 😄

@BaconNinjaFPV Год назад

lolol...I think I had one like that once and it was heaven. I am not going to guess as to how many people are actually going to read the manual :p

@1Samuel1524 6 месяцев назад

Ordered mine 2 days ago and I'm excited.

@skyrotfpv Год назад

Your videos are awesome! Very well explained and not missing a single step. Thank you! 😃

@BaconNinjaFPV Год назад

Thank you!!! I feel like sometimes they are wayyyyyy too long, but I just don't want anyone to miss out on something they might need no matter how small it is.

@robhumphrey04 11 месяцев назад

Great vid Bacon! Thank you. I’m just getting into HD Zero and got my goggles yesterday!

@Loki_FPV666 8 месяцев назад

Just ordered my goggles today can't wait to get them. I also per-ordered the V2 Freestyle VTX with the 90fps camera.

@retrodudefpv Год назад

Ordered these goggles yesterday & saving this vid f when they eventually arrive. Great info, thanks

@BaconNinjaFPV Год назад

Hopefully it helps you out when you get them in, and I hope you enjoy them as much as I have!

@MichaelDFPV Год назад

Awesome and well detailed video. Thank you so much. It will be very helpful when my Goggles ship and arrive. Thank you and subscribed. 😊

@BaconNinjaFPV Год назад

Thank you!!! I was hoping it would help some people that were waiting on them :)

@Vampir4997 Год назад

Again,ty for the great setup guide!

@BaconNinjaFPV Год назад

you are very welcome man!!!

@Heisssam Год назад

Currently new in the fpv scene and planning to build the budget fpv drone soon! Very eager to try it out. I was thinking of getting a good headset and this is the one I feel like worth investing in. Great video!

@BaconNinjaFPV Год назад

It is absolutely one of those things that you can buy now and keep using for years without needing to replace it!

@lemonsquareFPV Год назад

Good point on the control link, definitely ELRS or Ghost at high link rate, especially with the Runcam90. I run ELRS 500hz, still haven’t tried 1000, now that I am running this goggle I will have to try it. I run 2 cherries on the top and 2 lollipops on the bottom when I’m flying around myself, house, yard. When I get outside I just use 4 triple feed patch, crosshair or helical antennas. For power I’m using a 10k mAh 18W PD power bank in my pocket with a USB-C to 5.5x2.1 or just whatever battery I have lying around… or a laptop power supply if I’m at home, sitting on the couch.

@BaconNinjaFPV Год назад

I usually run ELRS at 250hz, but sometimes I feel super fast and switch it up to 500hz, lol. I haven't messed with the 1000hz modes either, but I might give them a shot as well at some point. I have tried the quad patch setup, but didn't really like it as much as having some omni's available to the array. I have heard lots of people say good things about that set up though. What kind of power bank are you using? I have seen some wild price differences across the board on them.

@lemonsquareFPV Год назад

@@BaconNinjaFPV not sure where my reply went… damn, don’t want to type that all out again. Power bank is a 3+ year old $15 18W PD ELRS backpack on the goggle just go to Darren Allatt $495 video and get your backpack working and make a video so people can fix theirs

@muchthump Год назад

Just got goggles a few weeks ago, but now just able to get around to updating fw and flying my new mob 6. Thanks for these vids! Got my sub :) Also, will share since you make some very well produced content and you deserve many more subs, lol.

@BaconNinjaFPV Год назад

Thank you so much! I really appreciate it :)

@jlarson42 Год назад

Great overview of the HD zero goggles. I rate it crispy bacon. 🥓 Mine are on pre-order. I currently fly analog and dji. My goal is to move my micros and racers over to HD zero. Happy flying everyone. 🤓

@BaconNinjaFPV Год назад

mmmm crispy bacon, lol. That makes me think I need a bacon based rating system for reviews!!!!!! I think going HDZ on micros is a great idea. They tend to really benefit from low fixed latency since they can be so twitchy and responsive. I hope you get yours soon!

@sixtofive Год назад

Great thorough coverage of the system! I've been trying to convince myself I don't need it, but I think I'm losing that argument with myself. 😂 I've been using most of the same gear I started with back in 2018/2019, so it's really been feeling behind the curve lately. This year I've started switching the fleet over to elrs, ordered one of the new boxer radios, and might give in and end up using my walksnail vrx with a set of these goggles. It's going to feel like being brand new again for a while!

@BaconNinjaFPV Год назад

lololol...it is always hard to win an argument with yourself, especially when it comes to one over new FPV gear :p It sounds like you are getting some good life out of what you are using though, so an investment every now and then is acceptable to give you a couple more years of new features. At least you aren't a "buy everything new because it is new" pilot...that gets expensive, lol.

@davidhoward2901 Год назад

Thanks for the info

@BaconNinjaFPV Год назад

you are very welcome!

@holisticaustralia 2 месяца назад

Geeze Man, I am glad your a super nerd or else I wouldn't have a clue. Thanks 👍🏻 Mate 😊

@apachesmokewoundedsniper Год назад

What’s up 🥓🥷 I didn’t see you taste the HD zero goggles 😉 you made a great video again. It seems that you have to set the power switch to off if you want to plug a 6s lipo. The screen of the multimeter was a bit blow out 😊 stay safe bro

@BaconNinjaFPV Год назад

I shoulda licked it!!!!!!!! I recommend setting that power switch to off when using 6S just to avoid the initial plug in spike, but I have a feeling lots of people are just going to leave it on and roll with plugging in as the on switch, lol. I did that multimeter shot like 6 times and my camera kept freaking out due to something about how the LCD was refreshing...it was either blowing out the screen or refusing to focus the whole time. I really need better cameras that I can set a fixed focus on and manually lock the settings :(

@ktkt1825 Год назад

Great content! It would help if you shaded the multimeter screen so the readout would be visible- around 9:56 and earlier.

@BaconNinjaFPV Год назад

Thank you!!! I actually did do that a few times in a few different ways, and although it looked fine on the camera monitor is never turned out in production for some reason. I am running some pretty low end gear, so hopefully in the future little things like that will get better :)

@flyingquisinart Год назад

Thanks!

@BaconNinjaFPV Год назад

Thank you!!!! I really appreciate the support :)

@RickJamesFPV Год назад

Thanks Broski🙌

@BaconNinjaFPV Год назад

You are very welcome!!

@DallyDDD 8 месяцев назад

Great info thanks. Im guessing you already know that you said 15 amps, at 03:35? instead of 15watts? Just letting you know. As it blew my mind when you said 15 amps. You really explain everthing in easy to understand terms, thanks again.

@mrmagoo600 4 месяца назад

Nice info as always, Does the angle that the True RC antennas sit on the goggle with the way they are mounted effect the beam angle at all when flying?Allot of pilots and myself included will look down. Would there be any benefit to running antenna like the True Rc MX2 Air and angle them on the goggles?

@baggszilla Год назад

Yessss! Thanks Bacon Ninja!

@BaconNinjaFPV Год назад

You are very welcome!! :)

@h2o40fpv Год назад

Hey men great video Im waitig on my HDZERO also when u have a time, do a video on radios I think most of the pilots that watch ur videos are new in the hobby they have to learn on how not to damage the radio thank u Bacon Ninja.

@BaconNinjaFPV Год назад

Thank you!!! I am putting it on my production list :)

@torpedoLaw 11 месяцев назад

I’ll take them!

@FATSNAIL-FPV Год назад

Ordered the goggles and bamn, this video pops up in my feed! The part with the multimeter tough.....

@BaconNinjaFPV Год назад

Yeahhhhh....I could not for the life of me get the stupid bench camera to focus when that multimeter screen was on. I did it 6 times...so I had to go with hopefully you an see what my probes are doing well enough and understand what I am saying with the negative polarity symbol. :(

@FATSNAIL-FPV Год назад

@@BaconNinjaFPV i received my Goggles and Race2/90Cam bundle yesterday. Tried to update and it bricked lol. Unbricked it trough the manual BUT NOT using that Phoenix app thing, just formatted to fat32 and followed the steps. it's pretty logical and worked out. Now to install the Race 2 vtx and 90fps cam in my SniperX racer....

@SunriseWaterMedia Год назад

39:45 are you recording the menu internally with the goggles? I can't seem to start a recording for longer than a few seconds, unless a quad is on, and when I switch to the menu, the recording stops! I must be missing something, because that would be frustrating if recording the menu was not an option.

@BaconNinjaFPV Год назад

In this one I am actually recording the whole thing with a capture card over its HDMI out, so I bet going to the menu is actually kicking you out of having the recording function available when you are trying with the DVR :(

@SunriseWaterMedia Год назад

@@BaconNinjaFPV Thanks for the reply. Dang, that sucks though. 🫤

@Halfrightfox Год назад

Pulled the trigger on the freestyle bundle. Should be shipped late this month. Did the VTX progamming cable come with the freestyle VTX? I Cant imagine they wouldnt include it with my expensive piece of plastic.😂

@BaconNinjaFPV Год назад

You should absolutely get a cable with the goggles! They don't send any cables with the VTX kits (except a Mipi in this case), but all of the receiving equipment should come with one. They have a pretty cool new flashing tool too that makes all of this a little easier!

@Halfrightfox Год назад

@@BaconNinjaFPV funny enough, after I posted this comment, I went into the goggles Manuel and saw they ship the goggles with the VTX programming cable 😂 READ THE MANUAL PEOPLE Followup question. When I get my goggles and drone built, how would I go about transmitting audio back to the goggles? I understand it would work if the VTX had smart audio, but with the newer digital VTX's smart audio isn't a thing anymore. Can you give me some insight into this issue?

@mikepdel Год назад

Hi one more question if I may ! Can I use 5.8vtx antenna with HDZERO vtx thanks

@BaconNinjaFPV Год назад

you sure can! Just make sure your VTX antenna has a UFL connector since all of the HDZ ones take that connection, and make sure your goggle antennas match the polarity of your VTX antenna.

@mikepdel Год назад

@@BaconNinjaFPV Thanks a lot!

@fredio54 3 месяца назад

Thank you for the discord tip, joined. Questions, 1, analogue requires a module and is not built in? 2, dual DVR with AND without OSD included is not a feature yet, right? That would be nice, or a subtitles track that it can be perfectly generated from later.

@front7inexfatal432 Год назад

Fuck’n A Bacon.. hell of a video 🔥 super informative. Caught wait to finally turn my goggles on this weekend

@BaconNinjaFPV Год назад

and get that moblite in the air! I am glad you decided to keep the goggles man, because long term they really are going to be a great investment.

@mikepdel Год назад

Hi thanks for the video, do the HDzero vtx whoop lite comes with 25mw or 200 ? is there a way to find out, I can’t do it from beta flight I guess I need to do an update thanks

@BaconNinjaFPV Год назад

You are very welcome!! On the whoop lite, I believe it comes set to 25mw out of the box. If you don't want to go through the hassle of setting up smart audio or updating to 4.4 to get MSP VTX control, you can use the stick commands on page 18 of the VTX manual to change the output power. Basically you will want to start the quad up with your goggles on and radio connected, then move your sticks in and to the bottom. Hold them there for a couple of seconds, and the VTX menu will pop up. Just navigate through that and you should find some power output settings to change it with.

@mikepdel Год назад

Hey thanks so much!

@offtherailsfpv Год назад

Why on earth would I need to read the manual when I could just watch you videos??

@BaconNinjaFPV Год назад

lol, that is exactly why I put this together. I figured some people would rather just watch it....and watch me do it stupidly!

@VoiDFeedz Год назад

hello mr. bacon. when flashing my goggles I go to unzip the hdzero goggle file. and it opens my winrar to unzip all the bin files do I only copy the hdzero goggle BIN file, or do I copy all of them. (boot,os,rx,va BIN files onto the root of sd card?

@BaconNinjaFPV Год назад

you should just need the one HDZERO_GOGGLE bin file in the root. All of those other ones are for the emergency recovery procedure I believe. Kinda cluttered in those zip files, lol.

@StringbeanFPV Год назад

So you have to flash firmware to vtx then flash the unlock then flash the firmware again? How you said it kinda confused me

@BaconNinjaFPV Год назад

it is a little confusing, for sure! I do have a vid on it though. A little dated, but the process is still the same :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KAOU2KqFZyM.html You will just have to go to the firmware menu in the goggles and tell it to flash VTX rather than having the VRX figure it out on its own.

@StringbeanFPV Год назад

@@BaconNinjaFPV thanks for the help man. Got it all squared away in enough time to have a nice sunset maiden flight ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LO96hfbD-Cg.html

@user-yk1cw8im4h Год назад

What four antenna combo would you recommend for a mobula 6 whoop?

@BaconNinjaFPV Год назад

hmmmmm, that is a good question. If all you ever wanted to fly was a little Mob6 whoop, I would say a couple of TrueRC singularity omnis on the top connectors and two of their stubby variants on the front ones. If you plan on running more than just that whoop long term though, I would go with the TrueRC front patch kit and either the stubbies or normal length coax Singularity variety for the top. There are also some upsides to running a linear antenna setup all around with 90 degree differences in orientation for matching polarity with the linear antenna on the Mob6, but that one would get a bit more tricky.

@user-yk1cw8im4h Год назад

@@BaconNinjaFPV thanks but what do u mean by tricky? Btw Currently im using a cheapo linear with a bandicoot linear patch

@gmivisualsjason3729 Год назад

Could I use the 2s pack that comes with my DJI V2 goggles? I have a few of them.

@BaconNinjaFPV Год назад

"technically" yes you can. I have used mine, and it does work. Only down side is that the voltage coming out of pack swings pretty wildly. Never below what is necessary, but it can get kind of annoying with low voltage alarms.

@gmivisualsjason3729 Год назад

@@BaconNinjaFPV ah, I noticed this on the osd on my scoutHD goggles and wondered if it was a bug. Thanks for the reply... I've not watched all the video yet but I will. My goggles arrive Tuesday

@anupmokashi3114 Год назад

Skyzone cobra x v2 is good? What’s your opinion bro

@BaconNinjaFPV Год назад

For box goggles, the Cobra X v2 is probably the best option available! Great screens, a nice modular receiver with full antenna swap options, great DVR, and a terrific control layout.

@RubyS.1 Год назад

What video editor do you recommend?

@BaconNinjaFPV Год назад

I use Premiere Pro, but I also hear great things about Davinci Resolve. I just haven't moved over yet because I also use lightroom and photoshop, so sticking with one software suite is simpler. Premiere does crash a lot... :(

@rocketrob3324 Год назад

Bacon, Bacon, Bacon my OSD center is offset to the left side of my goggle screen on two of my whoops. Tried 4:3 and 16:9 and no diff. Any thoughts?

@BaconNinjaFPV Год назад

hmmmmm, are those your only whoop boards or are you running other whoop boards and just these two are a bit off?

@rocketrob3324 Год назад

@@BaconNinjaFPV I have one other whoop board and OSD is nicely centered.

@BaconNinjaFPV Год назад

@@rocketrob3324 hmmmm, there would for sure need to be something set different between the two. If they are both running the same cam and vtx as the on you have working properly, I would go into the CLI and copy out the OSD lines from a "dump all" command. Then I would go paste those over into the one that is off by a bit and see what that does. It could also be a firmware difference on the VTX since the grid for how many characters wide/tall the OSD is allowed to display is set in that firmware.

@rocketrob3324 Год назад

@@BaconNinjaFPV Great information - Thank you. I got a reply from HDZero tech and their suggestion was to go back to BF 4.3. I will check CLI as you suggest and worse case just drag all the OSD elements over to the right in BF. :)

@_tcmore Год назад

Stopped by to leave a like and add to the watch later list! If I watch right now I might have a much too large credit card bill this month 😂

@BaconNinjaFPV Год назад

lol, let that credit card have a break...wouldn't want to wear it out :p

@_tcmore Год назад

@@BaconNinjaFPV it is pretty worn out from Christmas so Maybe February 1st before the sale ends haha

@Maorifpv Год назад

Fan indicator disappeared from my goggle osd , how can I get it back ?

@BaconNinjaFPV Год назад

hmmmm, I have seen that happen a couple of times. First things first, just make sure your fan is set to on in the settings as a double check. I am sure that it is, but still a good idea to take a second look at :) After that, I would recommend flashing the goggles and any VTXs that are older than the goggle version you wind up flashing. Most of the time when it disappears like that it is something with the icon pack the goggles are using that causes it to not render correctly.

@Maorifpv Год назад

@@BaconNinjaFPV thanks for ur reply. I just found what happpen. Just need to long press button on the Googles to make the icon appear or dissapear

@djs134 Год назад

I’m stuck at 35 minutes, when I plug in a lipo and then the usb under device ready it says no. Everything up to that point went smoothly

@BaconNinjaFPV Год назад

So usually that means there is something wrong with which UART is selected for MSP VTX control in Betaflight 4.4. I would double check that it is selected on the correct one and that your RX/TX wires are going to the correct pads. I hope that helps!

@djs134 Год назад

@@BaconNinjaFPV I was mistaken and wired rx to rx and tx to tx even though I thought I double checked. Thanks for the response though

@MarztechRacing Год назад

The Joshua bardwell cable stopped working in a month

@BaconNinjaFPV Год назад

oof...that is sad :( I have had some concerns with mine being super loose lately. Hopefully they can get a v2 out with option ends for connecting two devices, more amps, and maybe a braided cable cover...I would love to see that happen.

@cpfpv6410 10 месяцев назад

also worth mentioning that chromebooks won't work for this firmware update process.

@BaconNinjaFPV 10 месяцев назад

That is an interesting note! I am going to have to dig one out of my closet and see if I cant get it to work somehow.

@HoRNET_FPV Год назад

Hmm why is it black? Was this a beta or is it from 2nd batch already?

@BaconNinjaFPV Год назад

mine are actually super pre-production. They are Ryan Quellet's set from the original mold tests that HDZ did prior to shipping the beta group. That does mean I have to return them soon though :(

@ohcrider Год назад

wait my new one

@ryswe Год назад

I wish hdzero had more goggles available at launch, having such a limited first run makes me wary of their own belief in the product. I bought them regardless because they seem great on paper, but waiting 3 months for a product to ship is lame, I'm American, I want it yesterday 😂😂😂

@BaconNinjaFPV Год назад

I wish they had more in that first round too, it would have been so nice to get them in more people's hands up front. I suppose it was just a very expensive order to place and they just didn't have the up front capitol to make it happen :( Amazon has spoiled us here in the US, lol...I want all my things with Prime shipping!!

@kabosune9097 Год назад

Shipping will probably take till March 😢

@BaconNinjaFPV Год назад

yeah, absolutely the downside to a popular product from a small company :( It is good and bad though. It is terrible to have to wait, but at least we know they are doing well enough to be supported for a good long time!

@JDDupuy Год назад

@@BaconNinjaFPV Start shipping 23 Jan 2023 for the orders according to Carl. Just hope you are not too far down the list.

@nerdCopter Год назад

+1👍i can wish 💪

@BaconNinjaFPV Год назад

Some day!

@GregQuillen Год назад

I couldn't see multimeter screen lol

@BaconNinjaFPV Год назад

yeah, that part ticked me off, lol. I did it a bunch of times and my camera just kept freaking out and flickering or over exposing. I guess the LCD refresh rate didn't jive with the software very well.

@GregQuillen Год назад

@Bacon Ninja FPV yea it's always huge issues trying to record screens. A few times I've gone back done another clip just recording screen. It's so annoying.

@manujk6802 Год назад

FatShark Case is insane and if u fit the batteries wrong inside that sounds like your problem to me. why someone would be stupid like that? :d

@BaconNinjaFPV Год назад

i would say it happens most often when someone is in a hurry and throws the cells in there. It isn't really keyed well to tell you which way things are in, and if you are using flat top 18650's that makes it pretty easy to mix up. Would be better if it just had a fuse so it didn't destroy the goggles though :)

@JDDupuy Год назад

We were told a few weeks ago shipping would start on 23 Jan 2023. from their website "Expected to start shipping in mid-March". You Tube folks need to stop putting out incorrect information. Add the 3 to 8 week shipping time on top of that. Nonsense. Money left my account 10 minutes after order.

@BaconNinjaFPV Год назад

If you want the honest truth....we weren't told either. The documentation that I got pre-embargo made no mention of it being a pre order scenario, temporary price, or staggered shipping.

@JDDupuy Год назад

@@BaconNinjaFPV Fair enough. HD Zero may have a great product but a terrible sales model. I'm out over 700 bucks at this point with really no idea when I will get the product "Expected to start shipping",... come on!

@BaconNinjaFPV Год назад

@JDDupuy Yeah I have been keeping an eye on lots of other people in the same boat with their orders. Best I can tell there were two batches. One that started shipping yesterday, and another in March. Im not sure where the split between the two batches was as far as how many goggles got into the first batch. I would assume based on you not having any info about ship dates, that yours is probably in that second group :(

@chrissubzero4990 6 месяцев назад

Do you actually ever fly a quad☺️

@Daiceto 11 месяцев назад

So.. what you're saying about the fatshark battery case is I CAN use it, it puts out the correct voltage and amps (if the batteries are capable blah blah) and the only reason why I shouldnt use it is cause dumb people are inserting the batteries without looking at the polarity aaaaand it breaks, the reason for that being miraculous fairy wish type of ways? aight.. then I'll use it.

@BaconNinjaFPV 11 месяцев назад

lol, partly yes. I will say though, it doesn't take dumb to make a small mistake putting them in backwards since the case isn't keyed and there isn't any protection on the goggle side besides one fuse that is a one time deal with no easy replacement. Everyone makes the occasional mistake, and I just don't want it to cost anyone their goggles.

@konaboyz1690 Год назад

Finally an honest review this is why I'm going to wait for three years for this system to iron out all of the f****** frogs

@BaconNinjaFPV Год назад

waiting isn't ever a bad call. This is a first gen product, and even though I think it is pretty darn great for gen 1 there is no way to tell what it will look like 12 months from now.

@Brighton-Abean 9 месяцев назад

$500 lol ther like $850 cdn... god damn canada

@BaconNinjaFPV 9 месяцев назад

those good ol' Canadian federation credits!

@sarahdaviscc 8 месяцев назад

15 watts, not amps.

@BaconNinjaFPV 8 месяцев назад

indeed, I did make the verbal equivalent of a typo there, lol.

@sarahdaviscc 8 месяцев назад

Sorry Eggs and Bacy, I didn't mean to come across as super critical. Good video!

@gmivisualsjason3729 Год назад

Read the manual.... 😂😂😂😂😂😂😂

@BaconNinjaFPV Год назад

lolol, hey...when we are lucky enough to have a manufacturer actually make a manual for an FPV product, we should read it :p

@ifeetz7612 8 месяцев назад

I cannot get video from my hd zero freestyle vtx. The rx and tx wires should only be for OSD correct? I should be getting video as long as vtx is powered up. When I scan for channel, nothing is found. I have carefully followed updating procedures, but I am getting nothing. Do I have a faulty vtx maybe? Any suggestions would help, thanks.

@Deep_field 9 месяцев назад

how to change goggle speed? goggles too fast. 😆

@ntorres1966 Год назад

Hey Bacon. I ordered them and waiting to receive but about the battery. On my skyzones I use the DJI battery would this be ok to use on the hdzero goggles. Great vid. Keep it up. Thanks.

@BaconNinjaFPV Год назад

You technically can...but it is for sure technically, lol. The battery pack is 2S and it will power the goggles, but the voltage output by it swings pretty hard. You will for sure get some false positive battery warnings if you don't set the lower batt limit to 3.2v, and there is a good chance you will still get some of them anyway. Thank you!! :)

@techx8075 7 месяцев назад

Sharkbyte/HDzero have completely turned me off to digital. Its a pain in the ass to setup and is very expensive. You can get an analog vtx for twenty bucks. The HDzero vtx start at 50 dollars and go up from there and we haven't even bought a camera yet. Nope no hdzero for me.

@rocketrob3324 Год назад

Thanks!

@BaconNinjaFPV Год назад

heyyyyyy, thank you sooooooo much!!!

@dirtydogfpv6905 Год назад

hi i have herd that you can run LHC & RHC antennas at the same time is this true

@BaconNinjaFPV Год назад

Yes, technically you can do that...but there are some things to consider. Firstly, you will only have one antenna on the quad and that one will either be LHCP or RHCP so mixing the antennas on the goggles between the two won't have as big of an impact as it would if you could run both polarities on the quad. But lets assume you want to run an RHCP antenna on the quad. With that, you could benefit from having both RHCP and LCHP on the goggles if you were in a highly reflective environment, but that benefit would be minimal. Also the receiver mixing that HDZero uses isn't truly diversity or mixing like we see in analog receivers. It uses two constellations of antennas and picks data from both of them at once, so again the benefits of mixing antennas on the goggles would be even more minimal. Really the best experience will be with four antennas matching the polarization of whatever you are running on the quad. Sorry for such a long response! lol