Headlights open & reseal tutorial 

Market don’t have cover for preve. You can look for a shop to polish back the cover.

Ebay

Available in ali express

And its a lot of work, but thats the fun part

Try the baking technique. I used the heat gun and it took too long. Baked in the oven @240 degrees for 15 minutes and it popped right off. I did use 2 knives and 2 flat heads.

@@ms.shunte8323 heat gun took me around 10 min for eachbheadlight, started at one side and worked my way along with trim remover tools

@@shoe1126 I tried both ways. The heat gun was actual work time. So 10 minutes of actual work time versus 15 minutes of bake no work. And 2 minutes of work.

@@ms.shunte8323 i see, very cool, ill probbtry oven if i do it again, but you have to remove all the wiring then right?

Not all headlight suitable for oven method

Then have to do operation on headlights

Basically is same

Depend on your experience using heatgun Different brand of heatgun got different method

Never done it before . Can’t give firm answer

Also where did u get the clamps ya. Thanks!

@@tzershernkhaw nowadays, mostly glue will be butyl. Easy to open. For the clip, we get from Ali express

u can get it through online. Mine bought from tao bao.

@@rdmalaysia8187 Could U please send me the link? It's very hard to find it. thx

@@tyenty item.taobao.com/item.htm?spm=a230r.1.14.19.c7704f6fTwmw9G&id=521225682500&ns=1&abbucket=1#detail

@@rdmalaysia8187 Thank a lot man, I just found the same on Aliexpress too. ;-)

@@tyenty you're most welcome.

Cut and seal back

Will a hot knife work

@@TW39 yes. Can be use

We will do if we got a d-max head light. But it's about the same way.

Same process haha

Yogananth Subramaniam no preve cover sell in market

Depend on the reseal skill and the glue using

Sika

Harry Crawler can look into Ali express

We do know got someone able to open using hair dryer, but we don’t know outcome

Yes

@@rdmalaysia8187 because in my work they sell the brand 3M silicone sealer will that be enough

@@mo198832 actually main issues is the way to seal it back Which type or brand doesn’t play the main role

Belum ad peluang

Kalau Kita ada headlights mini. Definitely can try on it

No cover to be sell in market

Boleh

Industrial sealant.

@@rdmalaysia8187 dear please tell me the chemical name who open light mirror without hear

@@rdmalaysia8187 without heat

open headlight cover must using heat or heat gun.

Tengok betapa serious kerosakan Boleh recover balik Guna heat gun

@@rdmalaysia8187 Ada kedai Ka boss?dkt mana

Sikaflex 255

Base on experience

Hi, u can't get the plastic cover individual. Only can get entire headlamp.

Sikaflex 255.

@@rdmalaysia8187 tq

Glue remover

@@rdmalaysia8187 can you provide the name or manufacturer of this preparation?

@@lukash2bmx we don’t have any name in English /Malay. We purchase at Ali express. Just search for 冷胶分离液

Permaseal glue remover

@@rdmalaysia8187 Could you tell me please which one of product have you used (name of product and producer)?

255 sikaflex

Tak ada jual Preve cover dalam market

I punya dah pecah berlubang…ada cara lain tak?

@@oyazarif1994 dah lubang tak ada pilihan. Tukar lampu 2nd hand

Tak Ada

Beli Di Ali express

@@rdmalaysia8187 ohh okay2 tq

Sikaflex 255

@@rdmalaysia8187 tq

Guna heat gun panas dulu silicone, ia akan Lembut sikit, senang sikit Nak bersih. Tapi masih susah juga. Kena perlahan buat

Boleh Saya tau beli dekat mana ya clear cover headlamp preve?

RM300

@@SSW2488 terima kasih atas jawapan..apa apapun saya dah diy dan buat sendiri pakai clear coat. paling murah survey kedai ada nk buat rm150 upah. cuma, masalah barang tu, xoriginal mcm import.ramai nasihat jgn tukar lens.so xjadi tukar

@@highiq145 dekat mana kedai RM150 tu bro

@@SSW2488 dkt melaka..ni labour saja.parts harga lain. tpi ni paling murah.memang standard rm200 ke rm300. sebab pasang ni, memang leceh. klau x btul pasang, mau air masuk.

Kendi Larang depends on headlamp glue. Not all can using same method

No mate, using focused heat you only heat the border where the permaseal is applied. Never use water, it gets through to parts and places you don't know when and how will dry. All the sealing purpose is to avoid water, dust and fumes from engine to get into the lenses. You can even use your normal stove oven to heat the entire piece. Make sure you remove wiring harness or any wire, bulbs and any removable piece before taking it into the oven. Set your oven at around 120 - 140 C for 15 minutes. Turn it off and then put your headlamp inside the oven. Put a cardboard piece as a base to avoid dripping and prevent your plastics to touch metal directly. Usually it takes from 10 to 15 minutes for the sealant to get soft. Use protective gloves and try prying it open with the appropiate tools. If the sealant is like thick chewing gum, sticky, chances are you made it really good. Please check your headlamp frequently, don't leave it without constant checks. Some manufacturers may have thinner plastics and they risk melting. Once the HL is opened, clean and take out the old sealant when it is still hot, this will save you a pain the rear. Once again, NEVER use hot water. Keep the thing dry.

“Oven opening” is a good way to open headlights. Unfortunately, it’s not working at all on permaseal glue.

Muhd Hafifi Hafiz RM 100++ pun boleh dapat. Hair dryer memang tak boleh

@@rdmalaysia8187 tq bossku

Sikaflex 255

Al83rt Salazar actually we manage to using the same timing as using oven. Btw, thanks a lot for your suggestion

What is the recommented temperature setting and duration? Will that damage the lense coating?

Pm fb page kita(rd Malaysia) untuk appointments

@@rdmalaysia8187 ok boss.tq boss

It’s works fine with us

@@rdmalaysia8187 silicone does not react to heat...

@@beletruz not using heat to melt silicone. Heat is for soften headlights cover, so put in something to open it up

@@rdmalaysia8187 I was refering to the fact that most OEM headlights come sealed with mastic wich melts when heated. And most AM headlights come sealed with a silicone that is easier to be melted with a chemical rather than just heat and force (happy holidays btw! :) )

@@beletruz understood your statement. Heat really can’t melt the permaseal silicone. In this video, we using acid to soften the silicone, and with our skill (the forcing that you mention) able to open smoothly (definitely not easy) Thanks for your sharing and advise

Rudolf Huijs Thanks for your advise and concern, we will improve on this

It called Safety not Security

Pm for ?